-
Sony SLV-760HF - page 1
Video Cassette Recor der ©1995 by Son y Cor poration Operating Instructions Owner’ s r ecord The model number is located at the rear of the unit and the serial number on the top. Record these numbers in the spaces provided below . Refer to them whenever you call upon your Sony dealer regar ding this product. Model No. _________________________ S ...
-
Sony SLV-760HF - page 2
Introduction 2 This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suf ficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instruct ...
-
Sony SLV-760HF - page 3
3 Introduction Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the remote commander 7 Step 3: Hookups 23 Step 4: Setting the clock 29 Presetting channels 33 Setting up VCR Plus+ T able of contents Getting Started Basic Operations 36 Playing a tape 38 Recording TV pr ograms 41 Recording TV pr ograms using VCR Plus+ 44 Setting the timer manu ...
-
Sony SLV-760HF - page 4
Getting Started 4 • Remote commander • Size AA (R6) batteries • Audio/video cable (3-phono to 3-phono) • 75-ohm coaxial cable with F-type connectors Getting Started Step 1 Unpacking Check that you have received the following items with the VCR: • AC power cord • Plug adaptor (SL V -760HF MJ/ 760HF PX) If the plug supplied with your VCR ...
-
Sony SLV-760HF - page 5
5 Getting Started Getting Started Inserting the batteries Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Using the remote commander Y ou can use this remote commander to operate this VCR and a Sony TV . Buttons on the remote commander marked with a dot ( • ) can be used ...
-
Sony SLV-760HF - page 6
Getting Started 6 Step 2: Setting up the remote commander (continued) Controlling other TVs with the r emote commander The remote commander is pr eprogrammed to control non-Sony TVs. If your TV is listed in the table below , set the appropriate manufactur er ’ s code number . 1 Set TV / VTR at the top of the remote commander to TV . 2 Hold down P ...
-
Sony SLV-760HF - page 7
7 Getting Started Getting Started If you have TV that has audio/video inputs Antenna only , no cable TV Cable box with many scrambled channels No cable box or cable box with only a few scrambled channels Cable box with only a few scrambled channels, using an A/B switch Hookups Selecting the best hookup option There are many ways in which your VCR c ...
-
Sony SLV-760HF - page 8
Getting Started 8 Audio/video (A/V) hookup Pages 8 to 9 If your TV has audio/video (A/V) input jacks, you will get a better picture and sound if you hook up your VCR using these connections. In addition, for a true “ home theater ” experience, you should connect the audio outputs of your VCR or TV to your stereo system. If your TV doesn ’ t h ...
-
Sony SLV-760HF - page 9
9 Getting Started Getting Started MENU TIMER SET / CHECK TUNER PRESET CLOCK SET SET VCR Plus+ CHANNELS ADVANCED OPTIONS SELECT : [ ] SET : [ EXECUTE ] ADVANCED OPTIONS AUTO ANT SEL DIMMER AUDIO MIX ON ON • • OFF OFF ON OFF SELECT SET : : [] [] AUTO STEREO NORMAL AUDIO APC • ON OFF • MAIN SAP • ON OFF • A/V hookup: VCR setup Press MENU a ...
-
Sony SLV-760HF - page 10
Getting Started 10 IN OUT VHF/UHF IN OUT VHF/UHF Step 3: Hookups (continued) Antenna hookup Make the following connections if you ’ re using an antenna (if you don ’ t have cable TV). A Use this hookup if you ’ re using: • VHF/UHF antenna (you get channels 2 – 13 and channels 14 and higher) • UHF-only antenna (you get channels 14 and hi ...
-
Sony SLV-760HF - page 11
11 Getting Started Getting Started 1 Press MENU and select CLOCK SET . 2 Select AUTO, then pr ess EXECUTE. 3 Set FULL AUTO to YES, then press EXECUTE. 3 Preset the channels into the VCR. For details, see page 29. 1 Press MENU and select TUNER PRESET . 2 Set ANTENNA/CABLE to ANT . 3 Select AUTO PRESET and pr ess EXECUTE. TUNER PRESET ANTENNA / CABLE ...
-
Sony SLV-760HF - page 12
Getting Started 12 SET VCR Plus+ CHANNELS GUIDE Or, push [ EXECUTE ] to see CH TV CH 25 – 15 Push [0 – 9] keys to set VCR Plus+ CHANNEL LIST program GUIDE CH MENU TIMER SET / CHECK TUNER PRESET CLOCK SET SET VCR Plus+ CHANNELS ADVANCED OPTIONS SELECT : [ ] SET : [ EXECUTE ] Step 3: Hookups (continued) Hookup 1: VCR Plus+ channel setup Automatic ...
-
Sony SLV-760HF - page 13
13 Getting Started Getting Started Pages 13 to 15 Hookup 4 Pages 19 to 21 Hookup 4 Pages 19 to 21 Cable box with many scrambled channels Recommended use Use this hookup if your cable system scrambles all or most channels. What you can do with this hookup • Record any channel by selecting the channel on the cable box What you can ’ t do • Reco ...
-
Sony SLV-760HF - page 14
Getting Started 14 TUNER PRESET ANTENNA / CABLE AUTO PRESET MANUAL SET CABLE ON • • ADD SELECT SET : : AFT FINE TUNING • OFF ERASE [] [] ANT CH1 TUNER PRESET ANTENNA / CABLE AUTO PRESET MANUAL SET CABLE ON • • ADD Please wait AFT FINE TUNING • OFF ERASE ANT CH1 2 Select AUTO, then pr ess EXECUTE. 3 Set FULL AUTO to YES, then pr ess EXEC ...
-
Sony SLV-760HF - page 15
15 Getting Started Getting Started SET VCR Plus+ CHANNELS GUIDE Or, push [ EXECUTE ] to see CH TV CH 33 – 5 Push [0 – 9] keys to set program GUIDE CH VCR Plus+ CHANNEL LIST MENU TIMER SET / CHECK TUNER PRESET CLOCK SET SET VCR Plus+ CHANNELS ADVANCED OPTIONS SELECT : [ ] SET : [ EXECUTE ] 2 Enter the program guide channel, then the cable box ou ...
-
Sony SLV-760HF - page 16
Getting Started 16 IN OUT VHF/UHF IN OUT Step 3: Hookups (continued) Hookup 3 Pages 16 to 18 No cable box, or cable box with only a few scrambled channels Recommended use Use this hookup if you do not have a cable box. Also use this hookup if your cable system scrambles only a few channels. What you can do with this hookup • Record any unscramble ...
-
Sony SLV-760HF - page 17
17 Getting Started Getting Started Hookup 3: VCR setup 1 Set the RF UNIT switch to CH 3 or CH 4, whichever channel is not used in your area. If both are used, set the switch to either channel. For details, see page 56. If you made A/V connections (pages 8 and 9), you can skip this step. 2 T urn on your cable box. 3 Set the clock. For details, see p ...
-
Sony SLV-760HF - page 18
Getting Started 18 SET VCR Plus+ CHANNELS GUIDE Or, push [ EXECUTE ] to see CH TV CH 25 – 15 Push [0 – 9] keys to set VCR Plus+ CHANNEL LIST program GUIDE CH 2 Enter the program guide channel, then the channel you use on your TV . 3 Press EXECUTE. MENU TIMER SET / CHECK TUNER PRESET CLOCK SET SET VCR Plus+ CHANNELS ADVANCED OPTIONS SELECT : [ ] ...
-
Sony SLV-760HF - page 19
19 Getting Started Getting Started Pages 19 to 22 Hookup 4 Cable box with only a few scrambled channels, using an A/B switch Recommended use By using an A/B switch (not supplied), this hookup allows you to record both scrambled and unscrambled channels conveniently . What you can do with this hookup • Record any unscrambled channel by selecting t ...
-
Sony SLV-760HF - page 20
Getting Started 20 Step 3: Hookups (continued) Hookup 4: VCR setup RF UNIT CH3 CH4 CLOCK SET SELECT SET QUIT AUTO • MANUAL :[ ] :[ ] :[ ] EXECUTE MENU AUTO CLOCK SET FULL • AUTO YES SET END [] : [] : EXECUTE NO TUNER PRESET ANTENNA / CABLE AUTO PRESET MANUAL SET CABLE ON • • ADD SELECT SET : : AFT FINE TUNING • OFF ERASE [] [] ANT CH1 TUN ...
-
Sony SLV-760HF - page 21
21 Getting Started Getting Started 5 Preset the cable box output channel (usually 2, 3 or 4). For details, see page 31. 1 Press MENU and select TUNER PRESET . 2 Enter the cable box output channel. 3 Set MANUAL SET to ADD and press EXECUTE. 03 TUNER PRESET ANTENNA / CABLE AUTO PRESET MANUAL SET CABLE ON • • ADD SELECT CH AFT FINE TUNING • OFF ...
-
Sony SLV-760HF - page 22
Getting Started 22 1 Find the VCR Plus+ Channel Listing in your program guide. For details, see page 33. 2 For unscrambled channels, if the channels in the program guide are differ ent from the channels that you actually use on your TV , set the channels that are differ ent as follows. For details, see page 34. 1 Press MENU and select SET VCR Plus+ ...
-
Sony SLV-760HF - page 23
23 Getting Started Getting Started 1 Press MENU, then pr ess CURSOR > / . to move the cursor ( z ) to CLOCK SET and press EXECUTE. 2 Press CURSOR ? / / to select AUT O, then press EXECUTE. Step 4 Setting the clock Using the Auto Clock Set feature Some TV and cable channels transmit time signals with their broadcasts. Y our VCR can pick up this t ...
-
Sony SLV-760HF - page 24
Getting Started 24 Setting the clock (continued) 3 Press CURSOR ? / / to set FULL AUT O to YES, then pr ess EXECUTE. • CURSOR • EXECUTE 4 T o activate the Auto Clock Set function, turn off the VCR. The VCR automatically sets the clock by searching for a channel that carries a time signal and sets your time zone and Daylight Saving T ime (if app ...
-
Sony SLV-760HF - page 25
25 Getting Started Getting Started 1 Follow steps 1 and 2 in “ Using the Auto Clock Set feature. ” The AUTO CLOCK SET menu is displayed. 2 Press CURSOR ? / / to set FULL AUT O to NO. 3 Press CURSOR > / . to move the cursor ( z ) to the item you want to set, then change the setting with the CURSOR ? / / . • For CLOCK SET CH Leave CLOCK SET ...
-
Sony SLV-760HF - page 26
Getting Started 26 • For TIME ZONE Select the time zone of your area, or select AUTO to have the VCR automatically set your time zone. • The options are: AUTO n A TLANTIC n EASTERN n CENTRAL n MOUNT AIN n P ACIFIC n ALASKA n HA W AII n AUTO. • For DA YLIGHT SA VING Select ON or OFF (standard time), or AUTO to have the VCR automatically set th ...
-
Sony SLV-760HF - page 27
27 Getting Started Getting Started CLOCK SET 1 SELECT SET : : [ [] / 1 / 1996 W E D 12 : 00 AM END : ] 06 [ EXECUTE ] CLOCK SET 1 SELECT SET : : [ [] / 1 / 1996 T U E 12 : 00 AM END : ] 0 [ EXECUTE ] CLOCK SET 1 SELECT SET : : [ [] / 1 / 1996 M O N 12 : 00 AM END : ] [ EXECUTE ] Using Manual Clock Set CURSOR EXECUTE MENU 1 Press MENU, then pr ess C ...
-
Sony SLV-760HF - page 28
Getting Started 28 Setting the clock (continued) 5 Set the year , hour and minutes in the same way as the day . 6 Press EXECUTE to start the clock. • CURSOR • EXECUTE ...
-
Sony SLV-760HF - page 29
29 Getting Started Getting Started Pr esetting channels This VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and unscrambled CA TV channels 1 to 125. First, we recommend that you preset the receivable channels in your area using automatic pr esetting. Then, if there ar e any unwanted channels, disable them manually . If you ...
-
Sony SLV-760HF - page 30
Getting Started 30 3 • T o preset cable TV channels: Press CURSOR ? / / to set ANTENNA/CABLE to CABLE. • T o preset VHF and UHF channels: Press CURSOR ? / / to set ANTENNA/CABLE to ANT . 4 Press CURSOR > / . to select AUTO PRESET , then press EXECUTE. All receivable channels are pr eset in numerical sequence. When no more receivable channels ...
-
Sony SLV-760HF - page 31
31 Getting Started Getting Started 1 Press MENU and select TUNER PRESET , then press EXECUTE. 2 • T o preset a channel: 1 Press the number buttons to enter the channel number , then press ENTER. 2 Press CURSOR ? / / to set MANUAL SET to ADD. • T o disable a channel: 1 Press CH +/ – to select the channel number . 2 Press CURSOR ? / / to set MA ...
-
Sony SLV-760HF - page 32
Getting Started 32 • MENU EXECUTE • EXECUTE • EXECUTE 1 Press MENU and select TUNER PRESET , then press EXECUTE. 2 Press the number buttons to select the channel you want to fine-tune, then press ENTER. 3 Press CURSOR > / . to select FINE TUNING. The fine tuning meter appears. 4 Press CURSOR ? / / to adjust to a clearer picture, then pr es ...
-
Sony SLV-760HF - page 33
33 Getting Started Getting Started Setting up VCR Plus+ How VCR Plus+ works Whenever you want to recor d a TV program, all you need to do is look up the program ’ s “ PlusCode, ” a number assigned to each program that ’ s published in the TV section of most newspapers, cable TV listings, and even TV GUIDE magazine. Then, just enter the Plus ...
-
Sony SLV-760HF - page 34
Getting Started 34 SET VCR Plus+ CHANNELS GUIDE Or, push [ EXECUTE ] to see CH TV CH 33 – 3 Push [0 – 9] keys to set Your TV CH VCR Plus+ CHANNEL LIST 03 SET VCR Plus+ CHANNELS GUIDE Or, push [ EXECUTE ] to see CH TV CH 33 – 5 Push [0 – 9] keys to set Your TV CH VCR Plus+ CHANNEL LIST SET VCR Plus+ CHANNELS GUIDE Then push [ ENTER ] CH TV C ...
-
Sony SLV-760HF - page 35
35 Getting Started Getting Started 4 Repeat steps 2 and 3 for each channel whose numbers don ’ t match. 5 When you have set all channels, press EXECUTE to confirm your channel settings. 6 When you ’ ve finished, press MENU to exit. • EXECUTE • MENU VCR Plus+ CHANNEL LIST GUIDE TV GUIDE TV 27 5 9 PAGE 1 5 17 28 33 – – – – – 3 4 55 ...
-
Sony SLV-760HF - page 36
Basic Operations 36 Basic Operations Playing a tape 1 T urn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. 3 Press · PLA Y . When the tape reaches the end, it will r ewind automatically . 6 EJECT COUNTER RESET DISPLA Y P P AUSE · PLA ...
-
Sony SLV-760HF - page 37
37 Basic Operations Basic Operations To Stop play Pause play Resume play after pause Search forward Search backward Fast-forward the tape Rewind the tape Eject the tape Press p STOP P P AUSE P P AUSE or · PLA Y T urn the DUAL MODE SHUTTLE (DMS) ring to # during playback T urn the DMS ring to 3 during playback T urn the DMS ring to ) FF during stop ...
-
Sony SLV-760HF - page 38
Basic Operations 38 INPUT SELECT Recor ding TV pr ograms 1 T urn on your TV and set it to the video channel. T o recor d from a cable box, turn it on. 2 Insert a tape with its safety tab in place. 3 Press INPUT SELECT until a channel number appears in the display window . TV/VTR T APE SPEED CH +/ – r REC VTR INPUT SELECT ...
-
Sony SLV-760HF - page 39
39 Basic Operations Basic Operations S 0 : 00 : 22 E SP T o stop r ecording Press p ST OP . T o check the r emaining tape length Press DISPLA Y during playback or recor ding. The white bar indicates the approximate length of tape remaining. T o watch another TV pr ogram while r ecording 1 Press TV/VTR to turn of f the VTR indicator in the display w ...
-
Sony SLV-760HF - page 40
Basic Operations 40 Recording TV pr ograms (continued) T o save a r ecor ding T o prevent accidental erasur e, break off the safety tab as illustrated. T o recor d on a tape again, cover the tab hole with adhesive tape. Safety tab Tips • T o select a channel, you can use the number buttons on the remote commander . Enter the channel number , then ...
-
Sony SLV-760HF - page 41
41 Basic Operations Basic Operations 1 Press VCR Plus+. 2 Press the number buttons to enter the program ’ s PlusCode. If you make a mistake, press TIMER CLEAR and re-enter the corr ect number . 123 456 789 0 VCR Plus+ Recor ding TV pr ograms using VCR Plus+ Just enter the program ’ s PlusCode listed in the TV program guide. The date, times and ...
-
Sony SLV-760HF - page 42
Basic Operations 42 3 Press T APE SPEED to select SP or EP . 4 Press ONCE, DAIL Y or WEEKL Y : The date, start and stop times, channel number and tape speed appear on the TV screen. If the information is not corr ect, press TIMER CLEAR to cancel the setting. 5 T o enter another setting, repeat steps 1 to 4. 6 Press POWER to turn of f the VCR. The T ...
-
Sony SLV-760HF - page 43
43 Basic Operations Basic Operations T o use the VCR after setting the timer T o use the VCR before a timer recor ding begins, just press POWER. The “ TIMER ” indicator turns off and the VCR switches on. Remember to pr ess POWER to reset the VCR in timer r ecording standby after using the VCR. Y ou can also do the following tasks while the VCR ...
-
Sony SLV-760HF - page 44
Basic Operations 44 TIMER SET / CHECK DATE WED 6 1 / 0 START STOP CH – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– – : –– – : ...
-
Sony SLV-760HF - page 45
45 Basic Operations Basic Operations TIMER SET / CHECK DATE WED 6 1 / 0 START STOP CH – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– – : –– – : –– –– – – / –– ? ...
-
Sony SLV-760HF - page 46
Additional Operations 46 Playback options Play at various speeds Fast-forward/r ewind V iew the picture during fast- forward or r ewind Play at twice the normal speed Play at high speed Play in slow motion Play frame by frame Play in reverse Skip a scene Rewind and start play Operation During playback, turn the DMS ring and hold at the speed you wa ...
-
Sony SLV-760HF - page 47
47 Additional Operations T o r esume normal playback Press · PLA Y . Tip • Adjust the picture using the $ / 4 TRACKING/STILL ADJUST buttons if: – Streaks appear while playing in slow motion. – Bands appear at the top or bottom while pausing. – The picture shakes while pausing. Notes • The sound is muted during these operations. • T ape ...
-
Sony SLV-760HF - page 48
Additional Operations 48 Recor ding TV pr ograms using the quick timer After starting recor ding in the normal way , you can have the VCR stop recor ding automatically after a specified duration. 1 While recor ding, press QUICK TIMER once. 2 Press QUICK TIMER r epeatedly to set the duration. Each press advances the time in incr ements of 30 minutes ...
-
Sony SLV-760HF - page 49
49 Additional Operations 1 Press POWER to turn on the VCR. 2 Press MENU and select TIMER SET/CHECK: • If you want to change a setting, go on to the next step. • If you do not need to change the settings, press EXECUTE, then turn of f the VCR to return to r ecording standby . 3 Press CURSOR > / . to select the setting you want to change or ca ...
-
Sony SLV-760HF - page 50
Additional Operations 50 Recor ding stereo and bilingual pr ograms Recording ster eo programs This VCR automatically receives and r ecords stereo pr ograms. When a stereo program is r eceived, the STEREO indicator lights up. If there is noise in the stereo program, set AUTO STEREO in the ADV ANCED OPTIONS menu to OFF . The sound will be recorded in ...
-
Sony SLV-760HF - page 51
51 Additional Operations Main or SAP sound (monaural) Main sound Bilingual Stereo How sound is recor ded on a video tape The VCR recor ds sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is r ecorded onto the normal audio track along the edge of the tape. Notes • T o play a tape in ...
-
Sony SLV-760HF - page 52
Additional Operations 52 Adjusting the pictur e Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the AUTO TRACKING indicator flashes in the display window , then lights steadily), distortion may occur if the tape was recor ded in poor condition. If so, manually adjust the tracking. Press the $ / 4 TRAC ...
-
Sony SLV-760HF - page 53
53 Additional Operations Menu option AUTO ANT SEL AUTO STEREO DIMMER AUDIO MIX NORMAL AUDIO APC ADVANCED OPTIONS AUTO ANT SEL DIMMER AUDIO MIX ON ON • • OFF OFF ON OFF SELECT SET : : [] [] AUTO STEREO NORMAL AUDIO APC • ON OFF • MAIN SAP • ON OFF • 1 Press MENU and select ADV ANCED OPTIONS. 2 Press CURSOR > / . to select the option t ...
-
Sony SLV-760HF - page 54
Additional Operations 54 Notes • Make sure you connect the plugs to jacks of the same color . • If the other VCR is a monaural type, leave the red plugs unconnected. • If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to pr event a humming noise. • Y ou can also use the LINE-1 IN j ...
-
Sony SLV-760HF - page 55
55 Additional Operations Operation (when recor ding on this VCR) Before you start editing • T urn on your TV and set it to the video channel. • Press INPUT SELECT to display “ L2 ” in the display window . • Press T APE SPEED on the remote commander to select the tape speed, SP or EP . 1 Insert a source tape with its safety tab r emoved in ...
-
Sony SLV-760HF - page 56
Additional Information 56 RF UNIT CH3 CH4 Additional Information General setup information Setting the RF unit When connecting the VCR to the TV using only an antenna cable, you must set the RF UNIT switch on the rear of the VCR so that the TV can receive the correct signal fr om the VCR. 1 Set the RF UNIT switch on the rear of the VCR to CH3 or CH ...
-
Sony SLV-760HF - page 57
57 Additional Information Attaching the external antenna connector When using a 300-ohm twin lead cable for VHF/UHF antenna, use the EAC-32 antenna connector (not supplied) to connect the antenna to the VCR. 1 Loosen the screws on the antenna connector . 2 W ind the twin leads around the screws on the antenna connector . 3 Retighten the screws. EAC ...
-
Sony SLV-760HF - page 58
Additional Information 58 Symptom The POWER switch does not function. The power is turned on but the VCR does not operate. The clock has stopped and “– : – –” lights in the display window . The playback picture does not appear on the TV screen. The picture is not clear . The picture r olls vertically during picture sear ch. The picture ha ...
-
Sony SLV-760HF - page 59
59 Additional Information Symptom A TV program does not appear on the TV screen. TV reception is poor . The tape starts playing as soon as it is inserted. The tape ejects when you press r REC. Nothing happens when you press r REC. No sound is recor ded on the normal audio track. The timer does not operate. A tape cannot be inserted. The remote comm ...
-
Sony SLV-760HF - page 60
Additional Information 60 Specifications System Format VHS NTSC standard V ideo recording system Rotary head helical scanning FM system V ideo heads Double azimuth four heads V ideo signal NTSC color , EIA standards T ape speed SP: 33.35 mm/s (1 3 / 8 inches/s) EP: 1 1.11 mm/s ( 7 / 16 inches/s) LP: 16.67 mm/s ( 11 / 16 inches/s), playback only Max ...
-
Sony SLV-760HF - page 61
61 Additional Information Index to parts and contr ols Refer to the pages indicated in parentheses ( ) for details. Front panel 1 POWER switch/indicator 2 T ape compartment 3 6 EJECT button (37) 4 · PLA Y button (36) 5 p STOP button (37, 39) 6 r REC button (39, 55) 7 DUAL MODE SHUTTLE ring (37, 46) 8 P P AUSE button (37, 55) 9 CHANNEL +/ – butto ...
-
Sony SLV-760HF - page 62
Additional Information 62 Index to parts and controls (continued) Display window Rear panel 7 VTR indicator (39) 8 Line/channel indicator (38) 9 T ime counter/clock indicator (37) !º REC (recor ding) indicator !¡ T ape indicator 1 TIMER indicator (45) 2 AUTO TRACKING indicator (52) 3 T ape speed indicator (39) 4 APC indicator (52) 5 STEREO indica ...
-
Sony SLV-760HF - page 63
63 Additional Information Remote commander 1 6 EJECT button (37) 2 Menu operation buttons (53) MENU button CURSOR > / . / ? / / buttons EXECUTE button 3 COUNTER RESET button (37) 4 Channel number buttons and ENTER button (31, 34, 41) 5 SKIP button (46) 6 TRACKING buttons (52) $ / 4 NORMAL SLOW (STILL ADJUST) buttons AUTO/MANUAL button 7 & SL ...
-
Sony SLV-760HF - page 64
Additional Information 64 Index to parts and controls (continued) !£ TV / VTR remote contr ol switch (5, 6) !¢ POWER switch !∞ TIMER CLEAR button (41, 49) !§ TV/VTR button (39) !¶ AUDIO MONITOR button (50) !• VCR Plus+ buttons (41) VCR Plus+ button ONCE button DAIL Y button WEEKL Y button !ª QUICK TIMER button (48) @º DISPLA Y button (37, ...
-
Sony SLV-760HF - page 65
65 Additional Information E, F , G Editing 55 EP mode 39 H, I, J, K Hi-fi audio track 51 L LP mode 40, 47 M Monitoring audio 50 N, O Normal audio track 51 P Picture adjustment. See Adjusting Playback 36 at various speeds 46 frame-by-frame 46 skip 46 slow motion 46 Presetting channels 29 Q Quick timer 48 Index A, B Accessories supplied 4 Adjusting p ...
-
Sony SLV-760HF - page 66
Additional Information 66 ...
-
Sony SLV-760HF - page 67
67 Additional Information ...
-
Sony SLV-760HF - page 68
uick r eference to using the VCR Sony Corporation Printed in Malaysia If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669) or write to: Sony Customer Information Center Sony Drive, Mail Dr op #T1-1 1, Park Ridge, NJ 07656 Q Hookup 3 T o play a tape 1 If you made A/V connections, set the ...
Do you have a question concerning Sony SLV-760HF?
Use the form below
If you did not solve your problem by using a manual Sony SLV-760HF, ask a question using the form below. If a user had a similar problem with Sony SLV-760HF it is likely that he will want to share the way to solve it.