Manual Samsung 5100

101 pages 3.02 mb
Download

Go to site of 101

Summary
  • Samsung 5100 - page 1

    Laser Facsimile User’s Guide SF-5100/SF-5100P 00-Cover 12/10/99 5:16 AM Page 1 ...

  • Samsung 5100 - page 2

    T rademark Notices • SF-5100, SF-5100P and Samsung Logo are trademarks of Samsung Electr onics Co., Ltd. • W indows is a trademark of Micr osoft Corporation. • IBM is a trademark of international Business Machines. • Centronics is a trademark of Centr onics Data Computer Corporation. • Other name and the trademarks mentioned in this manua ...

  • Samsung 5100 - page 3

    i Contents Unpacking _________________________________________ 1.1 Control locations and functions _______________________ 1.2 Choosing a location _________________________________ 1.4 Setting up your machine _____________________________ 1.4 Document tray ___________________________________ 1.4 Paper exit tray ___________________________________ 1 ...

  • Samsung 5100 - page 4

    ii Receiving a fax Receiving a fax ______________________________________3.6 Receiving automatically in F AX mode __________________3.7 Receiving manually in TEL mode ______________________3.7 Receiving in AUTO mode ____________________________3.8 Receiving automatically in ANS/F AX mode ____________3.8 Receiving manually using an extension telepho ...

  • Samsung 5100 - page 5

    iii Printing reports______________________________________ 5.1 System setup ________________________________________ 5.2 Group dialling_______________________________________ 5.7 Clearing memory ____________________________________ 5.9 T roubleshooting Clearing jams _______________________________________ 6.1 LCD error messages ____________________ ...

  • Samsung 5100 - page 6

    iv Important safety information Always be careful when using the machine. T o reduce the risk of fir e, electrical shock, and other injuries, keep these safety considerations in mind when installing, using, and maintaining your machine: • Stability . Place the machine on a secure, stable surface. The machine can be seriously damaged if it falls. ...

  • Samsung 5100 - page 7

    Precautions When using your machine, these precautions should always be followed. 1. Never push objects of any kind into your machine thr ough the case or cabinet openings. They may touch dangerous voltage points, cr eating a risk fire or shock. Never spill liquid of any kind onto or into the machine. 2. Slots and openings in the back and sides of ...

  • Samsung 5100 - page 8

    Safety notes Y our machine and the supplies are designed and tested to meet strict safety requir ements. Included are safety agency examination and appr oval and compliance to established environmental standar ds. Please read the following instructions car efully before operating your machine, and r efer to them as needed to ensure the continued sa ...

  • Samsung 5100 - page 9

    Installation 1 02-Installation 12/10/99 6:27 AM Page 2 ...

  • Samsung 5100 - page 10

    Unpacking Once you have unpacked your machine, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer . 1 .1 Installation Machine T oner cartridge Handset Document tray Laser facsimile user ’s guide Document exit tray Printer cable (For SF-5100P only . For information on connecting the paral ...

  • Samsung 5100 - page 11

    Control locations and functions T ake a moment to familiarize yourself with the main components and to understand their functions. Front view Paper tray Automatic paper feeder Manual paper feeder (SF-5100P only) Document guides Paper guides Document tray Document feeder Control panel Paper exit tray Document exit tray Note: Y our machine may look s ...

  • Samsung 5100 - page 12

    1 .3 Installation 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 T elephone line jack Extension telephone jack 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 T oner cartridge Cover Cover release buttons ( ...

  • Samsung 5100 - page 13

    1 .4 Installation Setting up your machine Document tray Insert two tabs on the tray into the slots as shown. Fold out the extender on the tray , if necessary . Paper exit tray Pull out the paper exit tray on the front of your machine. Fold out the extender on the tray , if necessary . Choosing a location T o help guarantee the trouble-free operatio ...

  • Samsung 5100 - page 14

    1 .5 Installation Document exit tray Insert the two tabs on the document exit tray into the slots on the front of your machine. Fold out the extender on the tray , if necessary . Insert one end first, then the other end by squeezing this leg inward to make the tray easy to insert. Handset and handset cradle 1. Plug the end of the coiled cord of the ...

  • Samsung 5100 - page 15

    1 .6 Installation 3. Attach the handset cradle to the main body . Insert the two tabs of the cradle into the slots on the left side of the machine as shown, and while pressing part A on the bottom of the cradle, push the cradle toward the machine until it clicks into place. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ...

  • Samsung 5100 - page 16

    0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 LINE EXT. 1 .7 Installation T o a standard phone wall jack T elephone line Plug one end of the telephone line cord into the LINE jack on the back of the machine and the other end into a standard phone wall jack. Note ...

  • Samsung 5100 - page 17

    1 .8 Installation 3. Connect the other end of the cable to the parallel interface port on your computer . See your computer documentation if you need help. Note: There is a parallel port on SF-5100, but it does not work. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ...

  • Samsung 5100 - page 18

    1 .9 Installation Installing the toner cartridge 1. Pulling the cover release buttons found on both sides of the machine toward you, open the cover . 2. Unpack the cartridge from its plastic bag, and then remove the paper rolled the cartridge. Holding on each end of the paper , pull it straight out, and then carefully remove it. 3. Shake the cartri ...

  • Samsung 5100 - page 19

    1 .10 Installation 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4. Find the cartridge slots inside the machine, one on each side. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6. Close the cover . Make sure that the cover is secu ...

  • Samsung 5100 - page 20

    1 .11 Installation Paper tray Automatic paper feeder Manual paper feeder (SF-5100P only) Loading paper For best results, use high quality xer ographic paper . The automatic paper feeder can hold a maximum of 150 sheets of plain paper . The maximum capacity may be less, depending on the paper thickness. Note: SF-5100P contains a manual paper feeder ...

  • Samsung 5100 - page 21

    1 .12 Installation 4. Adjust the paper guides to the width of the print material. Slide the guides until they lightly touch the stack of print material. Do not bend the print material. Paper guide 3. Insert the paper with the print side facing you. Place the print side facing you. 02-Installation 12/10/99 6:28 AM Page 14 ...

  • Samsung 5100 - page 22

    Paper type and size Satisfactory print and receive quality can be obtained with many types of plain paper . Since the quality of plain paper varies widely , test the print quality before buying lar ge quantities of paper . Y our machine uses a variety of papers including: • Xerographic paper • Bond paper • Dual-purpose paper Because all paper ...

  • Samsung 5100 - page 23

    1 .14 Installation Printing a demo page After installation, you may want to run a simple test on your machine by printing out a demo page. Press and hold down Demo (* button) on the control panel until the machine to print a demo page. 02-Installation 12/10/99 6:28 AM Page 16 ...

  • Samsung 5100 - page 24

    Getting started 2 03-Getting Started 12/10/99 6:19 AM Page 1 ...

  • Samsung 5100 - page 25

    Resolution 1 2 34 5 6 7 8 9 10 ABC JKL GHI TUV Symbols PQRS Demo 4 5 7 8 0 1 2 2 .1 Getting started Re sol utio n One - touch dial Use to call most frequently used LC D dis play The display shows the curr ent status of Nu mbe r ke ypad Use to dial numbers manually or to enter letters. De mo Press and hold down this button to print a demo page. Spee ...

  • Samsung 5100 - page 26

    Rcv.Mode/ Contrast Flash/ Status Redial/ Pause Search/Delete Copy Stop Start/Enter Setup Advanced FAX Report/ Help OHD/V.Req Scroll/Volume DEF MNO WXYZ Speed 6 9 3 2 .2 Getting started Sear ch/Delet e Use to search for numbers in the memory . Also use to delete digits in the edit mode. Cop y Use to copy a document. Star t/Ente r Use to start a job. ...

  • Samsung 5100 - page 27

    2 .3 Getting started Using the number keypad As you perform various tasks, you will need to enter names and num- bers. For example, when you set up your machine you enter your name (or your company’s name) and telephone number . When you store a one- touch dial or speed dial, you also enter the telephone numbers and names. When the display asks y ...

  • Samsung 5100 - page 28

    2 .4 Getting started 2. When the letter you want appears on the display , press another num- ber key labeled with the next letter you want. If the next letter is printed on the same number button, move the cursor by pressing ❿ , then pr ess the button. The blinking cursor moves right and the next letter appears on the display . 3. Select addition ...

  • Samsung 5100 - page 29

    2 .5 Getting started Entering numbers Y ou can enter the number of the remote fax machine manually by using the number keypad. The number you pressed appears on the display . When the display asks you to enter a number , you can also use a one- touch dial button (including group dial) or a 2-digit speed dial number . Editing numbers or name If you ...

  • Samsung 5100 - page 30

    2 .6 Getting started Setting up your fax number and name Y our fax number and name will be printed at the top of each page sent from your machine. 1. Press Setup on the control panel. The display shows the first setup menu; F AX NUMBER/NAME. 2. Press Start/Enter to access the Fax Number/Name menu. The display shows ‘F AX NUMBER’. 3. Press Start ...

  • Samsung 5100 - page 31

    2 .7 Getting started Setting the time and date The current time and date ar e shown on the display when the machine is on and ready for use (standby mode). The time and date ar e printed on all faxes you send. Note: If power to the machine is cut of f for over 30 minutes, when power is restor ed, the machine prompts you to r eset the time and date. ...

  • Samsung 5100 - page 32

    2 .8 Getting started Adjusting volume Ringer volume 1. Press ➛! or ❿ in standby mode. The display shows the current ringer volume setting. 2. Press ➛! or ❿ ! until you find the desired loudness. Four levels are available; 0~3. Y ou will hear the selected volume and the display will show the level. Setting ‘0’ turns the ringer off. The m ...

  • Samsung 5100 - page 33

    Basic operation 3 04-Basic 12/10/99 6:09 AM Page 2 ...

  • Samsung 5100 - page 34

    Preparing documents for faxing or copying Y ou can use the machine to fax or copy documents that are printed on standard letter or A4 size paper . Follow these guidelines to prepare your documents. • Do not attempt to feed the following types of documents into the machine: - wrinkled, curled, or folded paper - chemically processed paper (pr essur ...

  • Samsung 5100 - page 35

    3 .2 Basic operation Setting document resolution and contrast W e recommend sending documents printed using a typewriter , felt tip pen, black ink or laserwriter . The paper should be white or very light, and of normal weight – not cardboar d. Blue lines on a ruled pad do not fax well. When you send normal documents, you need not adjust the resol ...

  • Samsung 5100 - page 36

    3 .3 Basic operation Loading document 1. T urn the page face down. 2. Adjust the document guides to match the width of the document. 3. Slide the sheet down into the document feeder until it is gripped by the machine. The automatic document feeder seizes and pulls in the page. Y ou can insert up to 20 sheets at a time. If you insert more than one s ...

  • Samsung 5100 - page 37

    3 .4 Basic operation Sending a fax automatically 1. After loading a document, enter the number of the remote fax machine using the number keypad. One-touch or speed dialling is also available if you have already stor ed the number into a one-touch or speed dial number . For information on storing and using numbers in the memory , see page 3.14. If ...

  • Samsung 5100 - page 38

    3 .5 Basic operation Automatic redial When you send a fax, if the number you have dialled is busy or there is no answer , the machine will automatically redial the number every thr ee minutes up to a maximum of two times. The display shows ‘RETR Y REDIAL?’. T o redial the number without waiting, press Start/Enter . T o cancel the automatic redi ...

  • Samsung 5100 - page 39

    3 .6 Basic operation Receiving a fax Receiving modes Y our machine has four receiving modes: • In FA X mode, the machine answers an incoming call and immediately goes into receive mode, waiting for a fax to be sent. • In AUTO mode, the machine answers an incoming call expecting to receive a fax. If the machine does not sense a fax signal, it wi ...

  • Samsung 5100 - page 40

    3 .7 Basic operation Receiving automatically in F AX mode 1. Press Rcv .Mode/Contrast until the display shows ‘F AX MODE’. 2. When you get a call, the machine answers the call on a specified number of rings and receives a fax automatically . Y ou can change the number of rings. See ‘RINGS TO ANSWER’ on page 5.4. T o adjust the ringer volume ...

  • Samsung 5100 - page 41

    3 .8 Basic Operation Receiving in AUT O mode 1. Press Rcv .Mode/Contrast until the display shows ‘AUTO MODE’. 2. When you get a call, the machine answers it. If a fax is being sent, the machine goes into receiving mode. If the machine does not detect a fax signal, it will continue ringing to tell you it is a phone call. Y ou should pick up the ...

  • Samsung 5100 - page 42

    3 .9 Basic operation Receiving manually using an extension telephone This features works best when you ar e using an extension telephone connected to the extension telephone line jack on the machine. Y ou can receive a fax fr om someone you are talking to on the extension telephone without having to go to the fax machine. 1. When you receive a call ...

  • Samsung 5100 - page 43

    3 .10 Basic operation Copying overview The resolution is automatically set to SUPER FINE while the copy featur e is in use. However , the contrast can be changed to produce optimal copy quality for a particular document containing faint markings, dark image, photographs or other halftone images. When you make a copy , your machine provides several ...

  • Samsung 5100 - page 44

    3 .11 Basic operation Advanced copy features Y ou can adjust the copy quantity , size and collation. T ake the following steps: 1. Load a document with the print side facing down. If necessary , adjust Rcv .Mode/Contrast button to change the contrast. For details on the contrast, see page 3.2. 2. Press Copy . The display asks you to enter the numbe ...

  • Samsung 5100 - page 45

    3 .12 Basic operation Redial T o redial the number last called Press Redial/Pause . If a document is loaded in the document feeder , the machine automatically begins to send. T o search through redial memory 1. Press and hold Redial/Pause for 2 seconds. The redial memory in your machine r etains the last 10 numbers called. If you have dialled the s ...

  • Samsung 5100 - page 46

    3 .13 Basic operation Sending a recall Some special phone services requir e a switch-hook signal for proper operation. For example, if you have call-waiting, you can put a call on hold and take a second call on the same line by pressing the Flash/Status button. 1. When you are on the telephone and hear the call waiting signal, press Flash/Status on ...

  • Samsung 5100 - page 47

    3 .14 Basic operation One-touch dialling One-touch dialling lets you use any one of the 10 one-touch buttons to automatically dial a number . Storing a number for one-touch dialling 1. Press and hold one of ten one-touch buttons for 2 seconds that you want to assign. The display shows `Txx:’, where `xx’ repr esents the selected one-touch button ...

  • Samsung 5100 - page 48

    3 .15 Basic operation 3. The display asks you to enter a name. Enter the desired name. For information on how to enter names, see page 2.3. Or If you do not want to assign a name, skip this step. If you assign a name to the number , the name appears on the display when you press the one-touch button. 4. Press Start/Enter when the name appears corre ...

  • Samsung 5100 - page 49

    3 .16 Basic operation Speed dialling Y ou can store up to 80 numbers in 2-digit speed dial locations (01-80). Storing a number for speed dialling 1. Press and hold Speed for 2 seconds. 2. Enter a 2-digit location number (01 through 80) where you want to store a number , then press Start/Enter . If a number has already been stor ed in the location y ...

  • Samsung 5100 - page 50

    3 .17 Basic operation Editing a number for speed dialling 1. Press and hold Speed for 2 seconds. 2. Enter the 2-digit location number where the phone number you want to edit has been stored, then press Start/Enter . The display shows the number . 3. Press ➛! or ❿ to move the cursor to the desired number and edit the number . When you complete e ...

  • Samsung 5100 - page 51

    3 .18 Basic operation Searching for a number in the memory There ar e two ways to search for a number in the memory . Y ou can either scan from A to Z sequentially , or you can search using the first letter of the name associated with the number . Searching sequentially through the memory 1. Press Search/Delete , then press ❿ to move downward thr ...

  • Samsung 5100 - page 52

    3 .19 Basic operation Using the phonebook on your computer (SF-5100P only) When you install SmarThru softwar e on your computer , the phonebook feature is automatically installed. W ith the phonebook feature, you can set up one-touch dial or 2-digit speed dial numbers in your computer and download the information to your SF-5100P . Before using the ...

  • Samsung 5100 - page 53

    3 .20 Basic operation 4. The SF-5100P Phonebook dialogue box appears. 5. If necessary , press Get Phonebook to get the numbers currently stored in your SF-5100P machine. The one-touch or speed dial numbers will be uploaded and displayed in the SF-5100P Phonebook dialogue box. 6. Select the desired Phonebook number in the Phonebook list and click Ed ...

  • Samsung 5100 - page 54

    7. Enter any name and number , and click OK to save the information you just entered. 8. Repeat steps 6 and 7 to store more numbers. 9. When you have finished, you must click Send Phonebook to down- load the numbers to your SF-5100P machine. 10. Click Exit . NOTE : One-touch key and speed dial which are assigned in gr oup dial are not deleted. 3 .2 ...

  • Samsung 5100 - page 55

    Advanced fax 4 05-Advanced 12/10/99 5:59 AM Page 2 ...

  • Samsung 5100 - page 56

    4 .1 Advanced fax Broadcasting Use this feature to send your documents to multiple locations. After send- ing, the documents are automatically erased fr om the memory . 1. Load the document face down. If necessary , adjust Resolution , or Contrast . For details, see page 3.2. 2. Press Advanced F AX on the control panel. The display shows the first ...

  • Samsung 5100 - page 57

    4 .2 Advanced fax Delayed fax Y ou can set your machine to send a fax at a later time when you will not be present. 1. Load the document face down. If necessary , adjust Resolution , or Contrast . For details, see page 3.2. 2. Press Advanced F AX on the control panel. The display shows the first menu; BROADCASTING. 3. Press ➛ or ❿ until ‘DELA ...

  • Samsung 5100 - page 58

    4 .3 Advanced fax 6. If you want to send to more than one location, enter another fax number using the number keypad, one-touch dial, or 2-digit speed dial number . Note that you cannot use group dial numbers for another fax number . The number appears on the display . Press Start/Enter to confirm the number . Or T o send to one location or when yo ...

  • Samsung 5100 - page 59

    4 .4 Advanced fax Priority fax When the priority fax is enabled, a high priority document can be trans- mitted ahead of reserved operations. The document is scanned into the memory , then transmitted when the current operation is concluded. In addition, a priority transmission will interrupt a br oadcast operation between stations (i.e., when trans ...

  • Samsung 5100 - page 60

    4 .5 Advanced fax Polling What is polling? Polling is used when one fax machine requests another to send a docu- ment. This is useful when the person with the original document to be sent is not in the office. The person who wants to r eceive the document calls the machine holding the original and requests that the document be sent. In other words, ...

  • Samsung 5100 - page 61

    4 .6 Advanced fax 7. The machine stores the document in the memory . The display counts the number of pages being stored in the memory and the memory capacity remaining. The machine returns to standby mode and the display shows a reminder that a send polling is set. The machine automatically switches to F AX mode (automatic receiving) when set to b ...

  • Samsung 5100 - page 62

    4 .7 Advanced fax Cancelling a scheduled operation 1. Press Advanced F AX on the control panel. The display shows the first menu; BROADCASTING. 2. Press ➛ or ❿ until you find ‘CANCEL SCHEDULE’, then press Start/Enter . 3. Press ➛ or ❿ repeatedly until you find the operation you want to cancel, then press Start/Enter . The display asks y ...

  • Samsung 5100 - page 63

    Additional features 5 06-Additional 12/10/99 5:51 AM Page 2 ...

  • Samsung 5100 - page 64

    5. 1 Additional features Printing reports Y our machine can print reports containing useful information – Schedule Job, System Data, etc. The following reports ar e available: Help List This list shows the machine’s basic functions and commands to use as a quick refer ence guide. Sent Journal This report shows information concerning transmissio ...

  • Samsung 5100 - page 65

    5. 2 Additional features Note: The list you have set to print out automatically will not print out when there is no paper loaded or a paper jam has occurr ed. T o print list 1. Press Report/Help on the control panel. The display shows the first menu; HELP . 2. Press ➛ or ❿ until you find the list you want to print, then press Start/Enter . The ...

  • Samsung 5100 - page 66

    5. 3 Additional features Selectable options These instructions assume that you have followed the steps on page 5.2 under ‘Setting an option’ and the machine is prompting you to change one of the options listed here. • LANGUAGE — Y ou can select the display language from English, German, French, Italian, Spanish, Portuguese and Dutch. • SE ...

  • Samsung 5100 - page 67

    5 .4 Additional features • AUTO REDUCTION — When receiving a document as long as or longer than the paper loaded in your machine, the machine can reduce the data in the document to fit into your recor ding paper size. T urn on this feature if you want to reduce an incoming page that may otherwise need to be divided into two pages with only a fe ...

  • Samsung 5100 - page 68

    5 .5 Additional features • RCV . ST AR T CODE — The remote r eceive start code allows you to initiate fax reception fr om an extension phone plugged into the EXT . jack on the back of your machine. If you pick up the extension phone and hear fax tones, enter the remote code and the machine will start receiving. The passwor d is preset to 9 at t ...

  • Samsung 5100 - page 69

    5 .6 Additional features • Distinctive Ring Pattern Detection (DRPD) — “Distinctive ring” is a telephone company service which enables a user to use a single tele- phone line to answer several differ ent telephone numbers. The particu- lar number someone uses to call you on is identified by differ ent ring- ing patterns, which consist of va ...

  • Samsung 5100 - page 70

    5 .7 Additional features Group dialling (for multi-address transmission) Numerous one-touch and speed dial numbers can be r egistered as a group. By using the gr oup number , you can send a document to multiple parties in a single operation. Y our machine will dial the remote numbers in stored sequence. If the number is busy , your machine will dia ...

  • Samsung 5100 - page 71

    5 .8 Additional features 9. T o assign a name to the group, enter the desired name. Or If you do not want to assign a name, skip this procedure. 10. When you are finished, press Stop . Note: Y ou cannot include one group dial number in another group dial number . Editing group dial numbers Y ou can edit one-touch or speed dial numbers stored for gr ...

  • Samsung 5100 - page 72

    Clearing memory Y ou can selectively clear information stored in your machine’s memory . 1. Press Setup on the control panel. The display shows the first menu; F AX NUMBER/NAME. 2. Press ➛ or ❿ until ‘MEMOR Y CLEAR’ appears, then press Start/Enter . The display shows the items you can choose to clear . • F AX NUMBER/NAME : your fax numb ...

  • Samsung 5100 - page 73

    T roubleshooting 6 07-Troubleshooting 12/10/99 5:41 AM Page 2 ...

  • Samsung 5100 - page 74

    6. 1 T roubleshooting Clearing jams Document jams while sending a fax If a document jams while you are sending it, ‘DOCUMENT JAM’ appears on the display . Do not pull the document out of the slot. If you do this, it could harm your machine. 1. Open the control panel using your hand. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ...

  • Samsung 5100 - page 75

    6. 2 T roubleshooting Paper jams while the machine is printing By carefully selecting the paper type and loading them pr operly , you should be able to avoid most paper jams. If paper jams occur , an error message appears on the display . Follow the steps below to clear the jam. T o avoid tearing the paper , pull the jammed paper out gently and slo ...

  • Samsung 5100 - page 76

    6. 3 T roubleshooting IF JAMMED IN THE PRINTER OUTPUT AREA 1. If the paper jams as it exits to the paper exit tray and a long portion of the paper is visible, pull the paper straight out. If there is any r esistance, and the paper does not move immediately when you pull, stop pulling. Continue with the next step. IF JAMMED INSIDE THE MACHINE 1. Pul ...

  • Samsung 5100 - page 77

    6. 4 T roubleshooting 3. Gently pull the paper toward you. 4. Check that there is no other paper in the printer . 5. Reinstall the cartridge, then close the cover . Tips for avoiding paper jams By carefully selecting print materials and loading them pr operly , you should be able to avoid most paper jams. If jams do occur , follow the steps outline ...

  • Samsung 5100 - page 78

    6. 5 T roubleshooting Display Meaning Solution DOCUMENT JAM DOOR OPEN LINE ERROR LOAD DOCUMENT ! LSU ERROR The loaded document has jammed in the feeder . Clear the document jam. The top cover is not securely latched. Press down on the cover until it clicks in place. Y our unit cannot connect with the remote machine, or has lost con- tact because of ...

  • Samsung 5100 - page 79

    6. 6 T roubleshooting Display Meaning Solution PAPER JAM 2 POLLING ERROR POWER FAILURE WARMING UP Jammed paper still remains inside the unit. Clear the jam. The remote fax machine you want to poll is not ready to respond to your poll. Or When setting up to poll another fax machine, you have used an incorrect poll code. The remote operator should kn ...

  • Samsung 5100 - page 80

    6. 7 T roubleshooting Symptom The machine is not working, there is no display and the buttons are not working. Cause and Solution • Unplug the power cord and plug it in again. • Check that your socket is active. No dial tone. • Check that the phone line is connected properly . • Check that the phone socket in the wall by plugging in another ...

  • Samsung 5100 - page 81

    6. 8 T roubleshooting Symptom Y ou cannot poll another machine. Cause and Solution • The fax machine you are polling may be using a poll code. The incoming fax has blank spaces or you received a poor-quality copy . • The machine sending you the fax may be faulty . • The fax machine sending you a fax may have a dirty scan glass. • A noisy ph ...

  • Samsung 5100 - page 82

    Maintenance Cleaning the OPC drum If you are getting str eaks or spots on your print, you may clean the OPC drum. 1. Make sure that the paper is loaded. 2. Press Setup on the control panel. The display shows the first setup menu; F AX NUMBER/NAME. 3. Press ➛ or ❿ until ‘MAINTENANCE’ appears, then press Start/Enter . 4. Press ➛ or ❿ unti ...

  • Samsung 5100 - page 83

    6. 10 T roubleshooting Setting the machine to be checked by phone The Remote T est feature allows your machine to be checked out by a ser- vice company at a remote place by phone. 1. Press Setup on the control panel. The display shows the first setup menu; F AX NUMBER/NAME. 2. Press ➛ or ❿ until ‘MAINTENANCE’ appears, then press Start/Enter ...

  • Samsung 5100 - page 84

    6. 11 T roubleshooting Cleaning the document scanner T o keep your machine working properly , occasionally clean the white roller , ADF rubber , and the scanning glass. If they are dirty , documents sent to another fax machine will not be clear . Note: Do not turn the power off to clean the scanner , as documents stored in the memory will be lost. ...

  • Samsung 5100 - page 85

    6. 12 T roubleshooting 3. W ipe the roller surface with a soft cloth dampened with water . 4. Clean the ADF rubber piece also. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2. Disassemble the white roller as follows: Both ends of the white roller have plastic bu ...

  • Samsung 5100 - page 86

    6. 13 T roubleshooting 5. Carefully wipe the scanning glass with a soft, dry cloth. If the glass is very dirty , first wipe it with a slightly dampened cloth, then with a dry cloth. Be very careful not to scratch the glass surface. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ...

  • Samsung 5100 - page 87

    6. 14 T roubleshooting Managing the toner cartridge Expected cartridge life The life of your toner cartridge depends on the amount of toner used in each print job. For instance, when you print a typical business letter with about 5% page coverage, you can expect a toner cartridge life of approxi- mately 2,500 pages (1,000 pages only for the toner c ...

  • Samsung 5100 - page 88

    6. 15 T roubleshooting 2. Remove the old toner cartridge. Follow the instructions printed on the cartridge box to recycle the used cartridge. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3. Unpack the cartridge from its plastic bag, and then remove the paper rolled the cartridge. Holding ...

  • Samsung 5100 - page 89

    6. 16 T roubleshooting 5. Find the cartridge slots inside the machine, one on each side. Grasp the handle and slide the cartridge down between the cartridge slots until it drops into place. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4. Shake the cartridge from side to side 5 or 6 times ...

  • Samsung 5100 - page 90

    6. 17 T roubleshooting MEMO 08-Maintenance 12/10/99 5:32 AM Page 9 ...

  • Samsung 5100 - page 91

    Appendix 09-Appendix 12/10/99 5:24 AM Page 2 ...

  • Samsung 5100 - page 92

    7. 1 Appendix FCC regulations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reason- able protection against harmful interfer ence in a residential installation. This equipment generates, uses, and can radiate radio frequenc ...

  • Samsung 5100 - page 93

    7. 2 Appendix FCC DECLARA TION OF CONFORMITY according to FCC Part 15 1. Product Name : Laser Facsimile, Printer , Scanner , PC-F AX 2. Model Number : SF-5100, SF-5100P , Msys 5100, Msys 5100P 3. FCC Rules : TESTED TO COMPL Y WITH FCC P AR T 15 CLASS B 4. Operating Environment : FOR HOME OR OFFICE USE 5. FCC Compliance Statement This device complie ...

  • Samsung 5100 - page 94

    7. 3 Appendix Laser safety statement The facsimile is certified in the U.S to conform to the requir ements of DHHS 21 CFR Subchapter J for Class I(1) laser products, and certified elsewher e as a Class I laser product conforming to the r equirements of IEC 825. Class I laser products ar e not considered to be hazar dous. The laser system and facsim ...

  • Samsung 5100 - page 95

    7. 4 Appendix Laser product labels are located above the print cartridge. CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE APP AREILÀ LASER DE CLASSE 1 TO IEC 825 Safety information PRODUCT SAFETY USA UL 1950 (UL LISTING) CANADA CSA C22.2 No.950 & UL 1950 (CSA Certification) EEC (EUROPE) IEC 60950/EN60950 (TUV GS Certification) CB IEC ...

  • Samsung 5100 - page 96

    7. 5 Appendix Power saver This facsimile contains advanced energy conservation technology that r educes power consump- tion when it is not in active use. When the facsimile does not receive data for an extended period of time, power consumption is automatically lowered. For potentially faster printing of the first page, you may turn the power save ...

  • Samsung 5100 - page 97

    7. 6 Appendix Specifications Applicable line Public Switched T elephone Network (PSTN) or behind P ABX Compatibility ITU-T Group3, ECM Data coding MH/MR/MMR (ECM Mode) Modem speed 14400/12000/9600/7200/4800/2400 bps T ransmission speed Approx. 6 sec. (V .17 ECM: 14.4 kbps) Effective scanning width 8.3 inches (210 mm) Effective printing width Letter ...

  • Samsung 5100 - page 98

    7. 7 Appendix Index A adding documents • 4.7 alarm volume, setup • 2.8 auto reduction • 5.4 automatic dialing • 3.14 automatic redial • 3.5 B broadcasting • 4.1 C call back message • 5.1 caller ID • 5.5 cancelling schedules • 4.7 cartridge (see toner cartridge) connection extension phone • 1.7 telephone line • 1.6 power cord ? ...

  • Samsung 5100 - page 99

    7. 8 Appendix J jam, clearing document • 6.1 paper • 6.2 journal, print • 5.1 junk fax barrier • 5.5 K key volume, setup • 2.8 L language, select • 5.3 list, print • 5.1 LCD, location • 2.1 loading paper •1.1 1 document • 3.3 M maintenance adjust shading • 6.10 clean drum • 6.9 remote test • 6.10 notify toner low • 6.1 1 ...

  • Samsung 5100 - page 100

    7. 9 Appendix S schedule information • 5.1 searching memory • 3.18 redial memory • 3.12 sending after talking • 3.4 automatically • 3.4 broadcasting • 4.1 delayed fax • 4.2 priority fax • 4.4 polling • 4.5 sending confirmation • 5.1 sent journal • 5.1 setup document tray • 1.4 document exit tray • 1.5 handset • 1.5 syste ...

  • Samsung 5100 - page 101

    ELECTRONICS Internet Home page: http://www .samsungelectronics.com P/N: JC68-00251K Rev .1.00 00-Cover 12/10/99 5:16 AM Page 2 ...

Manufacturer Samsung Category All in One Printer

Documents that we receive from a manufacturer of a Samsung 5100 can be divided into several groups. They are, among others:
- Samsung technical drawings
- 5100 manuals
- Samsung product data sheets
- information booklets
- or energy labels Samsung 5100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Samsung 5100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Samsung 5100, service manual, brief instructions and user manuals Samsung 5100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Samsung 5100.

Similar manuals

A complete manual for the device Samsung 5100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Samsung 5100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Samsung 5100.

A complete Samsung manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Samsung 5100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Samsung 5100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Samsung 5100, that we can find in the current document
3. Tips how to use the basic functions of the device Samsung 5100 - which should help us in our first steps of using Samsung 5100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Samsung 5100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Samsung 5100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Samsung 5100?

Use the form below

If you did not solve your problem by using a manual Samsung 5100, ask a question using the form below. If a user had a similar problem with Samsung 5100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)