English dropdown-ico

Manual Eureka fdem 3101

16 pages 0.66 mb
Download

Go to site of 16

Summary
  • Eureka fdem 3101 - page 1

    Instruction booklet DISHWASHER Contents Installation, 2-5 Positioning and levelling Technical data Electrical connection Connecting the water supply Ecodesign Regulation Description of the appliance, 6 Overall view Control panel Loading the racks, 7 Lower rack Cutlery basket Upper rack Start-up and use, 8 Starting the dishwasher Loading the deterge ...

  • Eureka fdem 3101 - page 2

    2 EN Positioning and levelling 1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process. 2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabi ...

  • Eureka fdem 3101 - page 3

    3 EN The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment. Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user. The manuf ...

  • Eureka fdem 3101 - page 4

    4 EN Connecting the water supplies Connection to the water and electricity supplies should only be performed by a qualified technician. The dishwasher should not stand on top of the water hoses or the electricity supply cable. Connecting the water inlet hose The water inlet and outlet hoses and the electricity supply cable may be positioned towards ...

  • Eureka fdem 3101 - page 5

    5 EN Anti-flooding protection * To ensure floods do not occur, the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance. Some models are also equipped with the supplementary safety device New Acqua Stop * , which guarantees anti- flooding protection even in the ev ...

  • Eureka fdem 3101 - page 6

    6 EN Overall view 1. Upper rack 2. Upper sprayer arm 3. Tip-up compartments 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Cutlery basket 8. Washing filter 9. Salt dispenser 10. Detergent and rinse aid dispensers 11. Data plate 12. Control panel *** *** Only in completely built-in models. * Only available in selected models . Descrip ...

  • Eureka fdem 3101 - page 7

    7 EN Loading the racks * Only available in selected models. The number and position may vary. Before loading the racks, remove all food residue from crockery and empty liquids from glasses and cups. After loading the appliance, make sure that the sprayer arms can rotate freely. Lower rack and cutlery basket The lower rack can hold pans, lids, plate ...

  • Eureka fdem 3101 - page 8

    8 EN Start-up and use Measuring out the detergent A good wash result also depends on the correct amount of detergent being used; exceeding the stated amount does not result in a more effective wash and increases environmental pollution. Only use detergent which has been specifically designed for dishwashers. DO NOT USE washing up liquid. Using exce ...

  • Eureka fdem 3101 - page 9

    9 EN Wash cycles The number and type of wash cycles and options may vary depending on the dishwasher model. Notes: To make it easier to measure out the detergent, it is worth remembering that: 1 tablespoon = 15 gr. of powder = approximately 15 ml of liquid - 1 teaspoon = 5 gr. of powder = approximately 5 ml of liquid Optimum performance levels when ...

  • Eureka fdem 3101 - page 10

    10 EN Rinse aid and refined salt Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt, or washing up liquid. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you ...

  • Eureka fdem 3101 - page 11

    11 EN Care and maintenance Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel may be cleaned using a non-abrasive ...

  • Eureka fdem 3101 - page 12

    12 EN The appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully. General safety • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabil ...

  • Eureka fdem 3101 - page 13

    13 EN Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance (see Assistance). Troubleshooting * Only available in selected models. Problem: Possible causes / Solutions: The dishwash er does n ot st ar t or cannot be co ntrol led • Switch of f the appli ance b y pr ess ing the ON/ OFF butt ...

  • Eureka fdem 3101 - page 14

    14 EN After Sales Service After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engin ...

  • Eureka fdem 3101 - page 15

    15 EN Guarantee Guarantee 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or m ...

  • Eureka fdem 3101 - page 16

    16 EN 195102601.00 04/2012 pb - Xerox Fabriano ...

Manufacturer Eureka Category Dishwasher

Documents that we receive from a manufacturer of a Eureka fdem 3101 can be divided into several groups. They are, among others:
- Eureka technical drawings
- fdem 3101 manuals
- Eureka product data sheets
- information booklets
- or energy labels Eureka fdem 3101
All of them are important, but the most important information from the point of view of use of the device are in the user manual Eureka fdem 3101.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Eureka fdem 3101, service manual, brief instructions and user manuals Eureka fdem 3101. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Eureka fdem 3101.

Similar manuals

A complete manual for the device Eureka fdem 3101, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Eureka fdem 3101 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Eureka fdem 3101.

A complete Eureka manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Eureka fdem 3101 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Eureka fdem 3101, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Eureka fdem 3101, that we can find in the current document
3. Tips how to use the basic functions of the device Eureka fdem 3101 - which should help us in our first steps of using Eureka fdem 3101
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Eureka fdem 3101
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Eureka fdem 3101 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Eureka fdem 3101?

Use the form below

If you did not solve your problem by using a manual Eureka fdem 3101, ask a question using the form below. If a user had a similar problem with Eureka fdem 3101 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)