Manual Pelco ccc4000

12 pages 0.12 mb
Download

Go to site of 12

Summary
  • Pelco ccc4000 - page 1

    CCC4000 Series CCD Color Camera Installation/ Operation Manual C1925M (3/99) Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ® ...

  • Pelco ccc4000 - page 2

    2 Pelco Manual C1925M (3/99) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND WARNINGS ................................................................ 3 DESCRIPTION ................................................................................................................... 3 MODELS ............................................................ ...

  • Pelco ccc4000 - page 3

    Pelco Manual C1925M (3/99) 3 IMPOR T ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be obser v ed. 1. Installation and servicing should only be done by qualified service and installation personnel. 2. Installation shall be done in accordance with all local and national electrical and mecha ...

  • Pelco ccc4000 - page 4

    4 Pelco Manual C1925M (3/99) LOCA TION OF P AR TS AND CONTROLS Figure 1. Location of Parts and Controls (Front and Rear) BACK-FOCUS LOCKING RING CS-MOUNT RING 1/3-INCH CCD ELEMENT IRIS CONNECT OR POWER CONNECT OR CAMERA MOUNT (1/4-20 UNC) VIDEO OUTPUT (BNC) V -PHASE ADJUSTMENT 4 2 31 PIN 1 = CONTROL COIL + (D AMPING COIL –) PIN 2 = CONTROL COIL ? ...

  • Pelco ccc4000 - page 5

    Pelco Manual C1925M (3/99) 5 INST ALLA TION CAMERA MOUNTING Mount the camera using a 1/4–20 mounting screw that does not exceed .197" (4.5 mm ± .2 mm) in length (refer to Figure 2). An optional CA1750 Mount Adapter is supplied to attach the camera to a ceiling mount. T o install the adapter (refer to Figure 3): 1. Place the camera inside th ...

  • Pelco ccc4000 - page 6

    6 Pelco Manual C1925M (3/99) POWER REQUIREMENTS An external power supply (not provided) is required when using CCC4000 Series cameras. This camera will accept either AC or DC power in accordance with the chart immediately below . A safety ground terminal ( ) is provided on the connector block to connect the camera to ground potential. Maximum volta ...

  • Pelco ccc4000 - page 7

    Pelco Manual C1925M (3/99) 7 LENS INST ALLA TION GENERAL LENS INFORMA TION CCC4000 Series cameras are factory adjusted to the CS-mount standard. Fixed iris, manual iris, or passive (DC controlled) auto-iris lenses may be used. Passive (DC controlled) auto-iris lenses require a standard 4-pin square connector (type D4-152N, not supplied) that is sta ...

  • Pelco ccc4000 - page 8

    8 Pelco Manual C1925M (3/99) LENS MOUNTING Do not release the back-focus locking ring unnecessarily . Back-focus adjustment has been set at the factory to the standard CS-mount back-focus distance. T o mount a lens: 1. Remove the black protection cover from the CS-mounting ring. 2. If using a C-mount lens, mount a C/CS-mount adapter between lens an ...

  • Pelco ccc4000 - page 9

    Pelco Manual C1925M (3/99) 9 b. Adjust the lens and the CS-mount ring together until picture is sharpest. c. Hold the lens and CS-mount ring in place and turn the back-focus locking ring clockwise to tighten. Motorized Zoom Lenses 1. With the camera operating, position the camera to view an object at a distance not less than 45 feet (15 meters) awa ...

  • Pelco ccc4000 - page 10

    10 Pelco Manual C1925M (3/99) 2. Select a second camera that is out of synchronization with the first camera. 3. T o shift the V-phase, use a sharp pencil, a toothpick, or some other pointed device capable of being inserted into the V -phase adjustment opening. Each press of the V- phase button will shift the AC linelock by 60 degrees. 4. Switch th ...

  • Pelco ccc4000 - page 11

    Pelco Manual C1925M (3/99) 11 SPECIFICA TIONS CCD Sensor: Color 1/3-inch interline transfer Pixels NTSC: 512 H x 492 V PAL: 512 H x 582 V Sensing Area: 4.7 x 3.5 mm (3/16 x 1/8 in.) Sync System: Free running/line lock (when AC powered) Horizontal Resolution: 400 TV lines Lens Mount: CS mount Light Sensitivity: 3.5 lux ( ≥ 50 ire/-6 dB) at f/1.2 E ...

  • Pelco ccc4000 - page 12

    12 Pelco Manual C1925M (3/99) REVISION HISTOR Y Manual # Date Comments C1925M 1/98 Original version. 3/99 Added CCC4001-2 model. Revised manual format. P elco, the P elco logo, Camclosure, Esprit, Genex, Legacy , and Spectra are registered trademarks of P elco . ©Copyright 1999, P elco. Endura and ExSite are trademarks of P elco . All rights reser ...

Manufacturer Pelco Category Automobile Electronics

Documents that we receive from a manufacturer of a Pelco ccc4000 can be divided into several groups. They are, among others:
- Pelco technical drawings
- ccc4000 manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco ccc4000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco ccc4000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco ccc4000, service manual, brief instructions and user manuals Pelco ccc4000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco ccc4000.

Similar manuals

A complete manual for the device Pelco ccc4000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco ccc4000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco ccc4000.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco ccc4000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco ccc4000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco ccc4000, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco ccc4000 - which should help us in our first steps of using Pelco ccc4000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco ccc4000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco ccc4000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco ccc4000?

Use the form below

If you did not solve your problem by using a manual Pelco ccc4000, ask a question using the form below. If a user had a similar problem with Pelco ccc4000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (1)

Aniello Pastore

Possibile che in rete non esiste un manuale in Italiano per FUJIFILM E900? Che vergogna per noi Italiani.