Manual Teac DVD Receiver

59 pages 1.44 mb
Download

Go to site of 59

Summary
  • Teac DVD Receiver - page 1

    9A10513000 Z DR - H30 0DAB DVD Receiver OWNER’S MANUAL ...

  • Teac DVD Receiver - page 2

    CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosu ...

  • Teac DVD Receiver - page 3

    < Do not expose this apparatus to drips or splashes. < Do not place any objects filled with liquids, such as vases, on the apparatus. < Do not install this apparatus in a confined space such as a book case or similar unit. < The apparatus draws nominal non-operating power from the AC outlet with its STANDBY/ON switch in the standby posi ...

  • Teac DVD Receiver - page 4

    Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Important safety instructions . . . . . . . . . . . . . . . . . . . 2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Discs . . . . . . ...

  • Teac DVD Receiver - page 5

    Befor e Use Read this before operation < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. The ventilation holes should not be covered. Make sure there is at least 20 cm of space above and at least 5 cm of space on each side of the unit. Do NOT place anything on top of the unit. < The ...

  • Teac DVD Receiver - page 6

    Discs 1 T ype of discs that can be played on this system This player can playback discs bearing any of the following logos: DVD Video: • Single-sided or double-sided discs • Single layer or dual layer discs • Dolby Digital, DTS, MPEG or Linear PCM digital audio • MPEG-2 digital video • This unit can play DVD-R discs recorded in DVD video ...

  • Teac DVD Receiver - page 7

    Playable file format This unit can play following files recorded on a CD-R, CD-RW, DVD-R, DVD-RW or USB memory device: • MP3 files • Windows Media-formatted audio files • JPEG files • DivX video files (DivX 5, DivX 4, DivX 3 and DivX VOD video content) < File names should be alphanumeric characters. This unit cannot display symbols and f ...

  • Teac DVD Receiver - page 8

    Discs 2 < Always place the disc on the disc tray with the label side up. (Compact discs can be played or recorded only on one side.) < To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. How to remove the disc How to hold the disc < Should the disc become di ...

  • Teac DVD Receiver - page 9

    Remote Contr ol Unit The provided Remote Control Unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit. < Even if the remote control unit is operated within the effective range (5m), remote control operation may be impossible if there are any ...

  • Teac DVD Receiver - page 10

    Speaker Connection SUBWOOFER 10 ...

  • Teac DVD Receiver - page 11

    Caution: To avoid damaging the speakers with a sudden high-level signal, be sure to switch the power off before connecting the speakers. Check the impedance of your speakers. Connect speaker with an impedance of 4 ohms or more. The black speaker terminals are – (negative). Generally, the + side of the speaker cable is marked to make it distinguis ...

  • Teac DVD Receiver - page 12

    12 S-VIDEO IN VIDEO IN CAUTION: < < < Switch off the power to all equipment before making connection. Read the instructions of each component you intend to use with this unit. Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables. T ...

  • Teac DVD Receiver - page 13

    < Adjust the video aspect ratio to match that of the television (see page 39) . < This unit adopts analog copy protection features. If the unit is connected to a TV through a video recorder, the resulting playback may be affected. Connect the unit directly to the television. < In all cases, use the highest quality cables for the best possi ...

  • Teac DVD Receiver - page 14

    Connection to audio equipments etc. CAUTION: < Switch off the power to all equipment before making connection. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or spea ...

  • Teac DVD Receiver - page 15

    F DAB/FM Indoor Antenna Connect the supplied T-type DAB/FM antenna to the ANTENNA socket by turning the antenna’s screw cap clockwise. Extend the lead vertically and attach it to a window frame or wall with thumbtacks, or the like, where reception is best. < You can check the antenna adjustment or positioning for the best reception by viewing ...

  • Teac DVD Receiver - page 16

    Identifying the Parts 1 P A B C D E F G I J K L O N M H A I F E M H G L K J Note: To simplify explanations, instructions in this manual refer to the names of the buttons and controls on the front panel only. Associated controls on the remote control will also operate similarly. 16 ...

  • Teac DVD Receiver - page 17

    A B C D E F G H STANDBY/ON Use this button to turn the unit on and standby. The standby indicator lights in the standby mode. It turns off when the unit is turned on. The equipment draws nominal non-operating power from the AC outlet with its STANDBY/ON in the standby position. PHONES jack For private listening, insert the headphones plug into this ...

  • Teac DVD Receiver - page 18

    Identifying the Parts 2 A B E F H I K L O Q R S T M N P C D G J A Number buttons Use these buttons to key in track numbers, passwords, preset channels, etc. B SETUP Use this button to enter the setup menu where you can set up the parameters of the unit. C ANGLE Use this button to select camera angles during DVD playback. D REPEAT A-B In DISC or USB ...

  • Teac DVD Receiver - page 19

    J LOUDNESS Use this button to compensate for the loss of bass at low volumes. K SLEEP, TIMER When the unit is on, use this button to set sleep timer. In the standby mode, use this button to set timer. L CLOCK In the standby mode, use this button to adjust clock. M OSD Use this button to display information about the currently playing disc. N TIME U ...

  • Teac DVD Receiver - page 20

    Basic Operation 1 1 2 3 1 Press the STANDBY/ON button to turn the unit on. < The unit turns on with the source that was last selected. < You can also use the FUNCTION button (or the DAB/FM, DISC, USB or AUX button of the remote control unit) to turn the unit on. 2 Press the FUNCTION button (or the DAB/FM, DISC, USB or AUX button of the remote ...

  • Teac DVD Receiver - page 21

    Dimmer You can dim the front panel’s display. Use the DIMMER button to cycle between these settings: Full brightness Medium brightness Minimum brightness Headphones Insert the headphones plug into the PHONES jack, and adjust the volume. CAUTION Always lower the volume level prior to plugging in your headphones. TO AVOID DAMAGING YOUR HEARING - Do ...

  • Teac DVD Receiver - page 22

    Basic Operation 2 S-BASS (Super Bass) button Press the S-BASS button to turn the Bass boost function on or off. < The S-BASS and the LOUDNESS buttons don’t work together. LOUDNESS button This button compensate for the loss of bass at low volumes. Select off when listening at normal levels. 1 2 3 MP3 WMA JPEG DIVX Listening to a USB Memory Devi ...

  • Teac DVD Receiver - page 23

    DVD VCD CD MP3 WMA JPEG DIVX Listening to a Disc 1 5 2 4 3 1 Press the FUNCTION button to select ‘DISC’. < When no disc is loaded in the CD player, ‘NO DISC’ is displayed. 2 Press the OPEN/CLOSE button ( L ) to open the tray. 3 Insert the disc label side up. < In the case of double-sided discs, the side to be played should be face dow ...

  • Teac DVD Receiver - page 24

    DVD VCD MP3 WMA JPEG On-scr een menu An on-screen menu is shown when a DVD or video CD with playback control (PBC) content is loaded. The way in which the menu works may differ from disc to disc. DVD menus Use the cursor buttons to select the menu item from a DVD, and confirm the selection using the ENTER button. Returning to the menu screen Press ...

  • Teac DVD Receiver - page 25

    MP3 and Windows Media-formatted audio files When a disc or USB is loaded, a list of directories appears on the screen. Select a directory by pressing the 5 / b buttons and press the ENTER button. File names will appear on the screen. Select a file and press the ENTER button or the PLAY/PAUSE ( y / J ) button. Playback will start from the selected f ...

  • Teac DVD Receiver - page 26

    DVD VCD CD MP3 WMA JPEG DIVX Basic Operations for a Disc and USB Memory Device Pausing playback (freezing the pictur e) Press the PLAY/PAUSE button to pause audio playback. Any DVD or video CD image is frozen. Press the PLAY/PAUSE button again to restart playback. < Caution - do not leave player in the ‘pause’ mode for extended periods of ti ...

  • Teac DVD Receiver - page 27

    DVD VCD CD MP3 WMA JPEG DIVX Skipping playback Press the SKIP button ( . or / ) repeatedly until the desired chapter or track is found. The selected chapter or track will be played from the beginning. < When playing back video CDs with PBC, the . button is disabled. DVD VCD CD MP3 WMA JPEG DIVX Fast scanning Search for a part of a chapter/track ...

  • Teac DVD Receiver - page 28

    DVD VCD CD MP3 WMA JPEG DIVX Selecting a chapter or track Use the number button to select tracks or chapters for playback. Example (DVD, VCD, CD) To select No.3, press ‘3’. To select No.10, press ‘0/10’. To select No.12, press ‘10+’ and ‘2’. To select No.20, press ‘10+’ and ‘0/10’. To select No.23, press ‘10+’, ‘10+’ ...

  • Teac DVD Receiver - page 29

    DVD Selecting subtitles Use the SUBTITLE button to select DVD subtitles. Repeated presses of this button cycle through available languages on a disc until OFF is reached (no subtitle). < Subtitles do not always appear immediately after the language has been selected. It may be necessary to wait a few seconds until the subtitles appear. < Some ...

  • Teac DVD Receiver - page 30

    DVD VCD JPEG DIVX Pictur e Zoom To zoom the picture, press the ZOOM button during playback. Each time the ZOOM button is pressed, the magnification level changes as follows: DVD, DivX, VCD: 2x, 3x, 4x, 1/2, 1/3, 1/4, OFF JPEG: 100%, 125%, 150%, 200%, 75%, 50%, OFF < You can shift the zoom point by pressing the 5 / b / g / t buttons during zoom p ...

  • Teac DVD Receiver - page 31

    DVD VCD CD Repeat playback Each time the REPEAT button is pressed, the mode is changed as follows: DVD: REPEAT CHAPTER q REPEAT TITLE q REPEAT ALL q OFF CD/VCD: REPEAT TRACK q REPEAT ALL q OFF < This feature is not available for all discs. The prohibition sign ‘ ’ is shown on screen in such cases when an attempt is made to repeat playback. & ...

  • Teac DVD Receiver - page 32

    DVD VCD CD MP3 WMA DIVX A-B r epeat playback Repeat Playback of a Designated Section (A-B Repeat) 1 . Start playback and designate the point at which the A-B repeat should start (point A) by pressing the A-B button. 2 . When the point at which repeat playback should end (point B) is reached, press the A-B button again. The designated section will b ...

  • Teac DVD Receiver - page 33

    VCD CD Time Sear ch (VCD/CD) 1. During playback, press the TIME button. If you want to search the entire disc, press the TIME button once. ‘DT: - - : - -’ is highlighted on the screen. If you want to search within the current track, press the TIME button twice. ‘TT: - - : - -’ is highlighted on the screen. 2. Within 7 seconds, enter your de ...

  • Teac DVD Receiver - page 34

    DVD Chapter Sear ch/ Time Search (DVD) Chapter Search 1. During playback, press the TIME button once. 2. Within 7 seconds, enter your desired chapter number (2 digit) using the numeric buttons. Playback starts from the selected chapter. Time Search 1. During playback, press the TIME button. If you want to search within the current title, press the ...

  • Teac DVD Receiver - page 35

    DIVX Chapter Sear ch/ Time Search (DivX) Chapter Search 1. During playback, press the TIME button once. ‘SELECT - - -’ appears on the screen. 2 . Within 7 seconds, enter your desired file number (3 digit) using the numeric buttons. Playback starts from the selected file. Time Search 1. During playback, press the TIME button twice. ‘GO TO -:- ...

  • Teac DVD Receiver - page 36

    DVD VCD CD Pr ogrammed playback Up to 20 chapters/tracks can be programmed in the desired order. 1 If another source is selected, press the DISC button or the FUNCTION button to select ‘DISC’. Press the PROGRAM button. 2 The program list appears on the screen. < To cancel the program mode, press the PROGRAM button again, or select ‘EXIT’ ...

  • Teac DVD Receiver - page 37

    MP3 WMA Pr ogrammed playback 1 If another source is selected, press the FUNCTION button to select ‘DISC’ or ‘USB’. 2 Select a file using the cursor buttons and press the PROGRAM button. The file is added to the program list. Repeat this step to program more files. 3 Press the MENU button once or twice to display the program list. 4 Highligh ...

  • Teac DVD Receiver - page 38

    DVD VCD Settings for DVD playback (intr oduction) This chapter describes how to use the SETUP menu. Most settings and adjustments are required to be set when you first use the system. Using the SETUP menu, you can adjust the picture size, set a preferred language for audio and the OSD (on screen displays), limit playback by children, et cetera. 1 T ...

  • Teac DVD Receiver - page 39

    Settings (General Setup Page) TV Display Because the shape of the television or monitor may not match the shape of the movie frame, you may need to change the way in which the image is displayed to avoid distortion on older televisions, which use a 4:3 aspect ratio; high-definition televisions use 16:9 (as do movies). Note that you may need to read ...

  • Teac DVD Receiver - page 40

    Settings (Audio Setup Page) Digital Audio Setup SPDIF OFF: Select this when you don’t use the DIGITAL OUT or the HDMI terminal. No signal is output from these terminals. ALL: Select this when the unit is connected to an audio component equipped with a built-in Dolby Digital or DTS decoder via the DIGITAL OUT or the HDMI terminal. PCM only (Defaul ...

  • Teac DVD Receiver - page 41

    Settings (Video Setup Page) Video Output Select proper setting in accordance with the connection (see page 12-13). S-VIDEO Select this when your TV or monitor is connected to the S-VIDEO terminal. Y Cb/Pb Cr/Pr Select this when your TV or monitor is connected to the COMPONENT VIDEO terminals. RGB Select this when your TV or monitor is connected to ...

  • Teac DVD Receiver - page 42

    Settings (Video Setup Page) HDMI ON Select this when your TV or monitor is connected to the HDMI terminal. OFF Select this when you don’t use the HDMI terminal. No signal is output from the HDMI terminal. < When your TV isn’t connected to the HDMI terminal, never select ‘ON’. No picture will be shown on the TV. Resolution This setting is ...

  • Teac DVD Receiver - page 43

    Settings (Passwor d Setup Page) Parental (Par ental contr ol) Playback of some DVD discs can be limited depending on the age of the users. The parental comtrol system allows the playback limitation level to be set by the parent. The default setting is ‘8’. Notes < The lower the level, the stricter the limitation. < If the rating of the lo ...

  • Teac DVD Receiver - page 44

    Listening to the DAB Radio TUNING FUNCTION SCAN SELECT Auto T uning 1 Select DAB using the FUNCTION button (or the DAB/FM button of the remote control unit). When the unit is switched to DAB mode for the first time, the auto tuning process will start automatically. 2 Press the SCAN button. The unit will start scanning the stations that you can list ...

  • Teac DVD Receiver - page 45

    Display Setting of the DAB You can choose the type of information displayed in the second line of the display while listening to or tuning in a DAB station. Each time the INFO/REPEAT button is pressed, the information is displayed as follows: Ensemble name Date and Time DLS (Dynamic Label Segment) Signal level Programme type Bitrate Ensemble name T ...

  • Teac DVD Receiver - page 46

    Listening to the FM Radio 1 Select FM using the FUNCTION button (or the DAB/FM button of the remote control unit). 2 Select the station you want to listen to (auto selection). Hold down the TUNING button (+ or –) for more than a second. ‘Searching...’ appears on the display, and the unit starts searching for a station. When a station is tuned ...

  • Teac DVD Receiver - page 47

    Display Setting of the FM (RDS) The Radio Data System (RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. You can choose the type of information displayed in the second line of the display while listening to or tuning in a FM station. Each time the INFO/REPEAT button is ...

  • Teac DVD Receiver - page 48

    Pr eset Stations You can store up to 20 DAB and 20 FM stations. Manual Memory Presetting (DAB/FM) MEMOR Y PRESET 1 Tune in a station you want to listen to. 2 Press the MEMORY button. ‘Preset’ and the preset channel number appears on the display. 3 While the preset channel number is blinking, select a preset channel to store the station using th ...

  • Teac DVD Receiver - page 49

    How to select preset stations 1 Select DAB or FM using the FUNCTION button (or the DAB/FM button of the remote control unit). 2 Select a preset channel using the PRESET buttons (or the numeric buttons of the remote control unit). How to erase preset stations (System Reset) 1 In DAB or FM mode, press and hold the INFO/REPEAT button for longer than 2 ...

  • Teac DVD Receiver - page 50

    About DAB With this unit you can receive and listen to Digital Audio Broadcast (DAB) programmes. DAB uses digital, not analogue signals, resulting in near CD-quality audio with virtually interference-free reception. Along with superior quality audio, DAB can also deliver additional audio channels and text. In the future, computer data and images ar ...

  • Teac DVD Receiver - page 51

    Listening to an Exter nal Sour ce 1 Connect the PHONES jack (audio output jack) of a portable audio player to the AUX 2 IN jack of the DR-H300DAB using the supplied stereo mini plug cable. 2 Press the FUNCTION button or the AUX button to select ‘AUX2’. 3 Play the source, and adjust the volume using the VOLUME knob of the DR-H300DAB and of the a ...

  • Teac DVD Receiver - page 52

    Setting the Clock 1 If the unit is on, press the STANDBY/ON switch to turn it standby. Press the CLOCK button. 2 (If ‘- -:- -’ blinks on the display, press the CLOCK button again.) The ‘hour’ value starts blinking. < If no button is pressed for 10 seconds, the time setting mode will be cancelled. 3 Press the VOLUME button to set the curr ...

  • Teac DVD Receiver - page 53

    7 Press the VOLUME button to turn on or off the RDS/DAB sync function. RDS/DAB Sync ON The clock setting will be automatically adjusted according to the time data from an RDS/DAB station. If you tune in an RDS/DAB station broadcasting incorrect time data, the clock might be wrongly adjusted, and that may eventually affect the timer operation. RDS/D ...

  • Teac DVD Receiver - page 54

    Setting the Timer TIMER VOLUME < The unit can be programmed to turn on at a specified time. < Adjust the clock before setting the timer. 1 If the unit is on, press the STANDBY/ON switch to turn it standby 2 Press the TIMER button. ‘Timer Set’ appears on the display, and the ‘hour’ value starts blinking. < When no button is pressed ...

  • Teac DVD Receiver - page 55

    7 Press the STANDBY/ON button to turn the unit off (standby). The clock and the TIMER indicator are displayed. < The unit will turn on at the specified time every day. < The unit turns on with the source that was last selected. Don’t forget to turn the unit off (standby), or the timer won’t work. Softwar e V ersion How to display the soft ...

  • Teac DVD Receiver - page 56

    T roubleshooting If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make ...

  • Teac DVD Receiver - page 57

    Picture noise. e If video from this system has to go through your VCR to get to your TV, the copy-protection applied to some DVD programs could affect picture quality. Please connect the unit directly to your TV. The image is distorted or monochromatic. e Make sure that the PAL-NTSC setting matches the television/monitor (see page 42). e Adjust the ...

  • Teac DVD Receiver - page 58

    Specifications DVD/CD Player Pickup Semiconductor laser, Wave length 650/790 nm Color System NTSC/PAL Video signal horizontal resolution More than 480 lines (DVD) Video signal-to noise ratio More than 50 dB (DVD) Audio frequency response 20 Hz to 20 kHz (+1 / –3dB) Audio signal-to-noise ratio 62 dB Dynamic range 80 dB S-Video output Y (luminance) ...

  • Teac DVD Receiver - page 59

    Z TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 Phone: (323) 726-0303 TEAC CANADA LTD. 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: (905) 890-8008 TEAC MEXICO, S.A. De C.V Campesinos N°184, Colonia Granjas Esmerald ...

Manufacturer Teac Category TV DVD Combo

Documents that we receive from a manufacturer of a Teac DVD Receiver can be divided into several groups. They are, among others:
- Teac technical drawings
- DVD Receiver manuals
- Teac product data sheets
- information booklets
- or energy labels Teac DVD Receiver
All of them are important, but the most important information from the point of view of use of the device are in the user manual Teac DVD Receiver.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Teac DVD Receiver, service manual, brief instructions and user manuals Teac DVD Receiver. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Teac DVD Receiver.

Similar manuals

A complete manual for the device Teac DVD Receiver, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Teac DVD Receiver by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Teac DVD Receiver.

A complete Teac manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Teac DVD Receiver - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Teac DVD Receiver, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Teac DVD Receiver, that we can find in the current document
3. Tips how to use the basic functions of the device Teac DVD Receiver - which should help us in our first steps of using Teac DVD Receiver
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Teac DVD Receiver
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Teac DVD Receiver in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Teac DVD Receiver?

Use the form below

If you did not solve your problem by using a manual Teac DVD Receiver, ask a question using the form below. If a user had a similar problem with Teac DVD Receiver it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)