Manual Runco CR-40HD

41 pages 3.15 mb
Download

Go to site of 41

Summary
  • Runco CR-40HD - page 1

    O WNER ’ S O PERATING M ANUAL CR-32HD / CR-40HD with Crystal Series™ LCD Displays ...

  • Runco CR-40HD - page 2

    T able of Contents One Y ear Limited W arranty ...................................................................... 4 Introduction ............................................................................................... 7 Precautions ............................................................................................... 8 Control P ...

  • Runco CR-40HD - page 3

    3 ISF Calibration (Service) Picture Adjust .................................................................................................................. 25 White Balance ................................................................................................................. 25 Blue Enable .............................................. ...

  • Runco CR-40HD - page 4

    One Y ear Limited W arranty 4 Congratulations on your purchase of Runco’ s latest video product and welcome to the Runco family! We believe Runco pr oduces “The W orld’ s Finest Home Theater Products”. W ith pr oper installation, setup and care, you should enjoy many years of unparalleled video performance. This is a LIMITED WARRANTY as def ...

  • Runco CR-40HD - page 5

    5 This Limited W arranty only covers failur e due to defects in materials and workmanship that occur during normal use and does not cover normal maintenance. This Limited W arranty does not cover cabinets or any appearance items; failure resulting from accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or ...

  • Runco CR-40HD - page 6

    6 RUNCO VIDEO PRODUCT INFORMA TION RET AIN THIS INFORMA TION FOR YOUR RECORDS Model Pur chased Date Serial Number Runco Authorized Dealer Name Address City State/Province Postal Code Phone Fax ADDITIONAL INFORMA TION: T o locate the name and addr ess of the near est Runco Authorized Service Center , or for additional information about this Limited ...

  • Runco CR-40HD - page 7

    7 Runco presents the high performance Crystal Series™ LCD displays, perfect for those who demand our awar d-winning flat panel performance in more intimate sizes than we offer with our larger plasma monitors. The new Crystal Series™ high definition capable LCD displays offer common features and performance in popular 26, 32 and 40-inch sizes, s ...

  • Runco CR-40HD - page 8

    8 CAUTION T o tur n off main power , be sure to remove the plugs fr om power outlets. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION ...

  • Runco CR-40HD - page 9

    9 CR-32HD and CR-40HD Front V iew 1 TV/A V Button (Input Source Selection) 2 MENU Selection Button 3 V olume Adjustment Buttons 4 Channel Selection Buttons 5 Remote Control Sensor 6 Power Button 7 Power Indicator 8 Speakers Contr ol Panels Bottom Side TV/A V MENU - VOL + CH 3 2 1 4 5 6 7 8 8 Indicator Status Red Green Green blinking Stand-by Power ...

  • Runco CR-40HD - page 10

    10 Control Panels CR-32HD Rear View and Input Panel INPUT2 S-Video Input INPUT2 Audio Input INPUT2 Video Input Headphone Jack RGB Input Connector (PC) DVI-D Input Connector (PC) Audio Input (PC) INPUT3 Video Input (DTV/DVD) INPUT3 Video Input (VIDEO) INPUT3 Audio Input (DTV/DVD) INPUT4 Video Input (DTV/DVD) Right Side 1 2 3 4 S-VIDEO VIDEO Audio L ...

  • Runco CR-40HD - page 11

    11 Control Panels CR-40HD Rear View and Input Panel Bottom Side 13 14 15 10 1 1 9 8 7 5 6 12 16 17 18 19 20 21 INPUT4 INPUT3 INPUT1 MONITOR-OUT INPUT2 S-Video Input INPUT2 Audio Input INPUT2 Video Input Headphone Jack Power Switch (Main) Power Input RGB Input Connector (PC) DVI Input Connector (PC) Audio Input (PC) INPUT3 Video Input (DTV/DVD) INPU ...

  • Runco CR-40HD - page 12

    12 Note: • Makes sure there are no objects between the remote control and its sensor . • Don’t place the remote control near a heater or in damp place. • A strong blow to the remote control may cause it not to operate. Remote Control 4 5 0 100 1 2 3 6 RGB HD TV DVI SLEEP MEMORY DISPLA Y HOLD SUB P AGE CANCEL TEXT REVEAL SIZE MIX INDEX TIMER ...

  • Runco CR-40HD - page 13

    13 T o view television channels, a signal must be input from either an outdoor antenna or a cable television system. 1. Connect the antenna or input cable to the 75 Ω coaxial input on the rear of the display . 2. If you ar e using an indoor antenna, you may need to turn it when tuning your television until you receive a clear pictur e. ANT or Cab ...

  • Runco CR-40HD - page 14

    14 Using the MONITOR OUT feature Connecting to a DVD or DTV Set-T op Box INPUT (RCA or DVI) Connections INPUT4 INPUT3 1. Connect the video cables to the Y , Pb, Pr input jacks (INPUT3 or INPUT4) on the display and the Y , Pb, Pr output jacks on the DVD or DTV Set-T op Box. 2. Connect the audio cables to the Audio L/R input jacks (INPUT3 or INPUT4) ...

  • Runco CR-40HD - page 15

    15 Connecting to a PC Connections T o use the display as a PC Monitor 1. T ur n the PC on. 2. Depending on the connection, press the DVI or RGB HD button on the remote contr ol. 3. Set up the PC Properties. (See page 16) 4. Adjust the screen in PC Mode. (See page 22) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 1 ...

  • Runco CR-40HD - page 16

    16 1. First, click on Settings on the W indows Start menu and click on “Control Panel”. 2. Double click on the Display icon. 3. Click on the Settings tab on the display dialog-box. 4. Adjust the resolution to 1024x768 pixels. 5. Click the Advanced button and click the Monitor tab on the dialog-box. Set the vertical-frequency to 60Hz and then cl ...

  • Runco CR-40HD - page 17

    17 Connecting the Power Cord and Switching the Display On / Off 4 5 0 100 1 2 3 6 TIMER OFF INPUT 1 7 8 9 OFF ON INPUT 2 INPUT 3 INPUT 4 SOURCE 1. Connect the power cord for your display to the power input on the back of your display . 2. Plug the power cord for the display into a nearby outlet. 3. Press the POW ER ( ) button on the r emote control ...

  • Runco CR-40HD - page 18

    18 Selecting an Aspect Ratio Basic Operations 1. Press the MENU button on the remote contr ol. 2. Press the ▲▼ buttons to select Aspect Ratio and then press the ENTER or ► button. 3. Select the appropriate Aspect Ratio by pressing the ▲▼ buttons and then pr ess the ENTER or ► button. • Y ou can select Anamorphic, Standard, Letterbox o ...

  • Runco CR-40HD - page 19

    19 Selecting Picture Adjust 1. Press the MENU button on the r emote control. 2. Press the ▲▼ button to select PICTURE ADJUST and then press the ENTER or ► button. 3. Press the ▲▼ button to select Brightness, Contrast, Color , Tint, Sharpness, Color T emp., Backlight, Save Settings or Restor e Settings . 4. Press the MENU button to r eturn ...

  • Runco CR-40HD - page 20

    20 Equalizer 1. Press the ▲▼ buttons to select Equalizer and then pr ess the ENTER or ► button. 2. Press the ▲▼ buttons to select Standar d , Music , Film , Speech and Custom on the remote contr ol or the ( ) to toggle between the selection. 3. Press the ▲▼ buttons to select Custom and then pr ess the ENTER or ► button. Press the ? ...

  • Runco CR-40HD - page 21

    21 Selecting Timer 1. Press the MENU button on the r emote control. 2. Press the ▲▼ buttons to select Timer and then press the ENTER or ► button. 3. Press the ▲▼ buttons to select Timer , On Timer , Off Timer or Sleep Timer . 4. Press the MENU button to r eturn to the previous menu. Timer On Timer Off Timer Auto T uning Fine T une Add /Er ...

  • Runco CR-40HD - page 22

    22 1. Press the MENU button on the r emote control. 2. Press the ▲▼ buttons to select Setup and then pr ess the ENTER or ► button. 3. Press the ▲▼ buttons to select OSD Language, PC Adjust, Caption, Parental Control, Letterbox Mode, Input Selection, Monitor Out or Overscan . 4. Press the MENU button to r eturn to the previous menu. OSD La ...

  • Runco CR-40HD - page 23

    23 Setup 1. Press the ▲▼ buttons to select Par ental Control and then pr ess the ENTER or ► button. 2. Enter your 4-digit PIN number to access the Parental options. The default for the new LCD display is “0000”. 3. Press the ▲▼ buttons to select Par ental Lock , then press the Enter button to turn On or Off. 4. Press the ▲▼ button ...

  • Runco CR-40HD - page 24

    24 Setup Monitor Out Overscan Input Selection 1. Press the ▲▼ buttons to select Input Selection and then pr ess the ENTER or ► button. 2. Press the ▲▼ buttons to highlight Input1, Input2, Input3 or Input4 and pr ess the Enter button. 3. Press the ► button to toggle the selection. Input1 and Input2 can be assigned for S-Video or Video (C ...

  • Runco CR-40HD - page 25

    25 ISF Calibration T o be used by a Runco Service T echnician or an ISF Certified personnel. A pass code is requir ed to access the ISF Calibration window . ISF Calibration (Service) 1. Press the MENU button on the r emote control. 2. Press the ▲▼ buttons to select ISF Calibration and then press the ENTER or ► button. 3. Press the ▲▼ butt ...

  • Runco CR-40HD - page 26

    26 ISF Calibration (Service) Blue Enable ISF Calibration Picture Adjust White Balance Blue Enable DNR Gamma Baud Rate Command Ack Factory Reset Splash Duration Enable > Disable DNR (Digital Noise Reduction) ISF Calibration Picture Adjust White Balance Blue Enable DNR Gamma Baud Rate Command Ack Factory Reset Splash Duration DNR 20 ISF Calibratio ...

  • Runco CR-40HD - page 27

    27 Displaying the Picture in Picture (PIP) 1. Press the PIP ( ) button. There are 2 modes of PIP window : Small, T win. Whenever you press this button, PIP window mode will be changed. The PIP window are changed in the following order : Small ➞ T win ➞ Of f 2. Press the ( ) button to select the external signal source for the PIP . • The exter ...

  • Runco CR-40HD - page 28

    28 1. Press the ( ) button on the r emote control. • When you are viewing the Sub-picture : The sub picture size will be changed in the following order whenever you press this button. Standard 4:3 ➞ Wide 16:9 1. Press the ( ) PIP picture mode button on the remote contr ol. • The PIP picture mode will change between ISF Day to ISF Night when t ...

  • Runco CR-40HD - page 29

    29 Swapping the Main & Sub-Picture Swapping the Main & Sub-Sound Picture in Picture (PIP) 1. Press the ( ) button on the r emote control. • The Main image and PIP image will switch with each other whenever you press this button. ➔ ➔ 1. Press the ( ) button on the r emote control. • The Main sound and PIP sound will switch with each ...

  • Runco CR-40HD - page 30

    30 Changing the PIP Aspect Ratio Picture in Picture (PIP) 1. Press the ( ) button on the remote contr ol. • When you are viewing the Main image: The image will change as shown below whenever you press this button. Standard 4:3 ➞ Wide 16:9 MENU EXIT ASPECT SIZE POSITION PIP P .MODE SWAP TV/A V S.SWAP CHANNEL DOWN S.MODE SURRND MTS/SAP MUTE ST AN ...

  • Runco CR-40HD - page 31

    31 Listening to Stereo Sound / SAP Depending on the particular program being broadcast, you can listen to stereo, mono, or a Secondary Audio Program. (SAP audio usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather .) 1. Y ou can select sound options ( Mono , Stereo , SAP , Mono+ SAP ) depending on the ...

  • Runco CR-40HD - page 32

    32 RS-232C Configurations RS-232 Configurations Note: • All commands are in ASCII format • Default baud rate is 115200,8,N,1, but can be changed (see page 26) • No carriage return is necessary 1 2 3 4 Pin 1: Ground Pin 2: TxD Pin 3: Ground Pin 4: RxD For an added convenience, an RJ-11 to DB9 (Male) adaptor is provided but is not requir ed. If ...

  • Runco CR-40HD - page 33

    33 RS-232 Configurations ‘[‘ + ‘S3A ’ + ‘000#’ Set audio volume to ### (=000~100) Example: [ S3A000075 sets volume to 75 ‘[‘ + ‘+3A ’ Audio volume up ‘[‘ + ‘- 3A Audio volume down ‘[‘ + ‘S4A ’ + ‘000#’ Main input selection 0=TV 1=Input1 2=Input2 3=Input3 4=Input4 5=DVI 6=RGB Example: [ S4A0006 selects RGB ‘[? ...

  • Runco CR-40HD - page 34

    34 RS-232 Configurations The following serial commands are meant to emulate buttons on the remote control. Each button has its own serial command, so effectively it is as if you were using the IR r emote only you’ll be doing so via serial commands. Using these commands will pr ovide active OSD responses just like the IR r emote. Each command begi ...

  • Runco CR-40HD - page 35

    35 If the signal from the system equals the standard signal mode, the screen will adjust automatically . If the signal from the system does not equal the standard signal, adjust the display mode as shown below referring to your video card instructions. Otherwise there may be no pictur e. Mode SD SD HD HD VESA VESA IBM IBM VESA MAC VESA VESA VESA VE ...

  • Runco CR-40HD - page 36

    36 PC Input Connector (D-Sub 15Pin) DVI-D Connector Pin PC IN Pin PC IN 1 Red (R) 8 Blue (B) Ground 2 Green (G) 9 Reserved 3 Blue (B) 10 Sync Ground 4 Ground 11 Ground 5 Ground (DDC) 12 Data (DDC) 6 Red (R) Ground 13 Horizontal Sync 7 Green (G) Ground 14 V ertical Sync 15 Clock (DDC) Pin Signal Assignment Pin Signal Assignment 1 T .M.D.S. Data2- 13 ...

  • Runco CR-40HD - page 37

    37 For Display Panel T roubleshooting No picture or sound. • Make sure the display is plugged in. • Make sure the power cord is connected corr ectly . • Check for power failure. Screen is black. • Make sure the corr ect source is selected. • Press the TV/A V button to change to TV . Picture is OK but there is no sound. • Press the Mute ...

  • Runco CR-40HD - page 38

    38 “No signal” message • Check if the signal cable (DVI Cable) is properly connected to the computer . (See page 15) “Out of range” message • This message may appear when the resolution and frequency of the video car d in the computer are out the range of the display . Select the proper r esolution and frequency for the display . (See p ...

  • Runco CR-40HD - page 39

    39 Specifications CR-3 2H D CR- 40 HD Native Resolution: 1366 x 768 WXGA 1366 x 768 WXGA Screen Size: 32 in. (diagonal) 40 in. (diagonal) Screen Aspect Ratio: 16:9 16:9 Available Aspect Ratios: 4:3, Letterbox, 16:9 Anamorphic, VirtualW ide™ 4:3, Letterbox, 16:9 Anamorphic, VirtualW ide™ DTV Compatibility: 480p, 720p, 1080i 480p, 720p, 1080i ISF ...

  • Runco CR-40HD - page 40

    40 Dimensions 40 in. (1016 mm) 45.75 in. (1 162 mm) 39 in. (991 mm) 9.85 in. (250 mm ) 25.125 in . (638 mm) 23.5 in . (597 mm) 4.5 in. (1 14.3 mm) CR-40HD CR-32HD 32 in. (813 mm) 38.125 in. (968 mm) 31.375 in. (797 mm) 9.85 in. (250 mm) 21.75 in. (552 mm) 19.5 in. (495 mm) 4.5 in. (1 14.3 mm) ...

  • Runco CR-40HD - page 41

    Runco International • 2900 Faber Street • Union City , CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www .runco.com RUMA-011095 7-13-05 SERIAL NUMBER ...

Manufacturer Runco Category Flat Panel Television

Documents that we receive from a manufacturer of a Runco CR-40HD can be divided into several groups. They are, among others:
- Runco technical drawings
- CR-40HD manuals
- Runco product data sheets
- information booklets
- or energy labels Runco CR-40HD
All of them are important, but the most important information from the point of view of use of the device are in the user manual Runco CR-40HD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Runco CR-40HD, service manual, brief instructions and user manuals Runco CR-40HD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Runco CR-40HD.

A complete manual for the device Runco CR-40HD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Runco CR-40HD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Runco CR-40HD.

A complete Runco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Runco CR-40HD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Runco CR-40HD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Runco CR-40HD, that we can find in the current document
3. Tips how to use the basic functions of the device Runco CR-40HD - which should help us in our first steps of using Runco CR-40HD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Runco CR-40HD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Runco CR-40HD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Runco CR-40HD?

Use the form below

If you did not solve your problem by using a manual Runco CR-40HD, ask a question using the form below. If a user had a similar problem with Runco CR-40HD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)