Manual EverFocus EDSR1600F

112 pages 5.74 mb
Download

Go to site of 112

Summary
  • EverFocus EDSR1600F - page 1

    Volume 1 Instr uction Man ual E E D D S S R R 4 4 0 0 0 0 F F / / 6 6 0 0 0 0 F F / / E E D D S S R R 9 9 0 0 0 0 F F / / 1 1 6 6 0 0 0 0 F F ...

  • EverFocus EDSR1600F - page 2

    EVERFOCUS ELECTRONICS CORPORATION EDSR 400F / EDSR600F EDSR 900F / EDSR1600F Instr uction Guide © 2004 Everfocus Electronics Corp 2445 Huntingto n Drive Phone 626.844 .8888 • Fax 626.8 44.8838 All ri ghts re served. N o part o f the cont ents of th is manual may be reproduced or transmitted in any form or by any means without written permissi on ...

  • EverFocus EDSR1600F - page 3

    T able of Contents Introduction I CHAPTER 1 Product Overvi ew 1 Features 1 Specifications 2 Front Panel Keys 3 Back Panel Connecti ons 5 CHAPTER 2 Installa tion 7 Basic Wiring Instruc tions 8 Hard Disk Drive In stallation 9 Final Install Pr ocess 9 CHAPTER 3 DVR Menu Setup 10 Clock/Languag e Set ting Menu 11 Daylight Savin gs Menu 13 Timer Setting ...

  • EverFocus EDSR1600F - page 4

    Introduction t o TCP/IP 60 Subnet Masks 61 Gateway Address 61 Virtual Ports 61 Pre-Installati on 62 What type of Network Co nne ction 63 Simple One to One Conne ction 64 Direct High Speed Modem Co nnection 70 Router or LAN Connec tion 72 CHAPTER 10 Linksys Port Forwa rding 75 Dynamic DNS 78 CHAPTER 11 D-Link Port Forw arding 80 Dynamic DNS 83 CHAPT ...

  • EverFocus EDSR1600F - page 5

    ...

  • EverFocus EDSR1600F - page 6

    EVERFOCUS ELECTRONICS CORPORATION Chapter 1 Pr oduct Ov er view DVRs are the industry’s first full-featured digital video reco rder designed specifically for use within the security industry. The Digital Video Recorder incorporates all the benefits of digital video recording, is simple to install, and ope rates just like a VCR. Highly efficient c ...

  • EverFocus EDSR1600F - page 7

    EVERFOCUS ELECTRONICS CORPORATION Specifica tions 2 ...

  • EverFocus EDSR1600F - page 8

    EVERFOCUS ELECTRONICS CORPORATION F ront Panel K eypads Keys: 3 ...

  • EverFocus EDSR1600F - page 9

    EVERFOCUS ELECTRONICS CORPORATION 4 ...

  • EverFocus EDSR1600F - page 10

    EVERFOCUS ELECTRONICS CORPORATION Bac k P anel Connections 5 ...

  • EverFocus EDSR1600F - page 11

    EVERFOCUS ELECTRONICS CORPORATION 6 ...

  • EverFocus EDSR1600F - page 12

    EVERFOCUS ELECTRONICS CORPORATION Chapter 2 Installa tion The installations described below should be made by qualified service personnel or system installers. Please refer to the following diag ram for the basic wiring connections. ¾ Please Note: Monitors and Camera s must be purchased separately. EDSR400: Camera 1 ~4 / EDSR600: Ca mera 1~6 EDSR9 ...

  • EverFocus EDSR1600F - page 13

    EVERFOCUS ELECTRONICS CORPORATION Basic W iring Instr uctions Please refer to diagram 1 on page 9 to assist you with this portion of the installation. ¾ Power: Connect the power source or adapter into the power socket shown in diagram 1.  Please Note: Do not plug the digi tal video recorder into the same power source as the cameras. ¾ Cameras: ...

  • EverFocus EDSR1600F - page 14

    EVERFOCUS ELECTRONICS CORPORATION Har d Disk Driv e Installation The first step in installing the hard drive is to insert the hard drive sleeve into the machine. The hard disk drive default setti ng is initially set to master. The second step is to insert the key prov ided and turn the tray key to the lock position. If this process is ignored the h ...

  • EverFocus EDSR1600F - page 15

    EVERFOCUS ELECTRONICS CORPORATION Chapter 3 D VR Menu Setup Assuming you have completed the first two chapters of this manual. You are now ready to begin setting up the digital vi deo recorder menu. To begin this process, press the MENU key. Once inside the main menu you will find ther e are 17 setup option pages as follows. Diagram 2 Turning the j ...

  • EverFocus EDSR1600F - page 16

    EVERFOCUS ELECTRONICS CORPORATION Cloc k Setting Menu Diagram 3 Diagram three is a screen shot of th e Clock/Language Setting Menu. In the Clock/Language Setting Menu the follo wing fields are defined as follows: ¾ Date: This field represents the curre nt date on the DVR. To change this, simply use the Jog Dial on the DVR. Press the Enter key to m ...

  • EverFocus EDSR1600F - page 17

    EVERFOCUS ELECTRONICS CORPORATION ¾ Menu Language: This field is set to English from factory and can not be changed. ¾ Video System: This field is set to NTSC from factory which is the North American Video Standard and can not be changed. The European and Asian Video Standards are PAL. ¾ Version: This field represents the firmware version the di ...

  • EverFocus EDSR1600F - page 18

    EVERFOCUS ELECTRONICS CORPORATION Daylight Sa vings Menu Diagram 4 In this menu you can set the DVR to adjust the daylight savings time automatically for you. ¾ Daylight saving: This field is to turn th e daylight savings function on or off. . To change this, simply use the Jog Di al on the DVR. Press the Enter key to make your selection. ¾ Start ...

  • EverFocus EDSR1600F - page 19

    EVERFOCUS ELECTRONICS CORPORATION Timer Setting Menu Diagram 5 Diagram five is a screen shot of the Timer Setting Menu. In this menu you can set a unique timer any day of the week to start r ecording from a specified start time to an end time. In the Timer Setting Menu the following fields are defined as: ¾ Week: This field represents the day of t ...

  • EverFocus EDSR1600F - page 20

    EVERFOCUS ELECTRONICS CORPORATION ¾ Speed: This field is used to set the sp eed at which you would like the timer record to be recording at. To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection.  Please Note: See Appendix B to find the appropriate speed to fit your recording needs. Set: This field is us ...

  • EverFocus EDSR1600F - page 21

    EVERFOCUS ELECTRONICS CORPORATION Sequence Setting Menu Diagram 6 Diagram Six is a screen shot of the Sequence Setting Menu. Th is menu is for setting up the way in which video is sequenced th rough the main monitor output. In the Sequence Setting Menu the followin g fields are define d as follows: ¾ Main Monito r: This field is to s et the sequen ...

  • EverFocus EDSR1600F - page 22

    EVERFOCUS ELECTRONICS CORPORATION  Dwell Time: This field represents the rate at which the cameras will sequence on the main monitor. The dwell time for the auto sequence can be set from 0 to 99 seconds. To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. 17 ...

  • EverFocus EDSR1600F - page 23

    EVERFOCUS ELECTRONICS CORPORATION Title Setting Menu Diagram 7 Diagram seven is a screen shot of the Titl e Setting Menu. In this menu you can set a unique title for each of your cameras. To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. ¾ Example: CH1 : FrontDoor CH2 : BackDoor CH3 : Hallway CH4 : Clo ...

  • EverFocus EDSR1600F - page 24

    EVERFOCUS ELECTRONICS CORPORATION Co ver t Setting Menu Diagram 8 Diagram eight is a screen shot of the Covert Setting Menu. In this menu you can set which cameras to be covert or hidden on the main monitor.  Channel: This field represents the ch annel you are setting to sequence.  Operation: This field is to turn on or off the camera for the ...

  • EverFocus EDSR1600F - page 25

    EVERFOCUS ELECTRONICS CORPORATION Alar m Setting Menu Diagram 9 Diagram nine is a screen shot of the Alar m Record Set ting Menu. This menu contains all the alarm operations and options need ed to successfully complete an alarm recording. In the Alarm Reco rd Setting Menu the follow ing fields are defined as: ¾ Operations: This field is to turn al ...

  • EverFocus EDSR1600F - page 26

    EVERFOCUS ELECTRONICS CORPORATION  Please Note: Refer to Appendix C for more informat ion about setting up the alarm board. ¾ Duration: When any sensor alarm conn ected to the device is activated, the device will immediately react with an alarm and display the warning message. This entry is used to set the al arm duration from 1 to 99 seconds. ...

  • EverFocus EDSR1600F - page 27

    EVERFOCUS ELECTRONICS CORPORATION Motion Setting Menu Diagram 10 Diagram ten is a screen shot of the Motion Setting Menu. Th is menu is for setting up the digital recorder for moti on recording. In the Motion Setting Menu the following fields are defined as follows: ¾ CH: This field represents the camera channels. ¾ OP: This field is to set the o ...

  • EverFocus EDSR1600F - page 28

    EVERFOCUS ELECTRONICS CORPORATION message. This entry is used to set the al arm duration from 1 to 99 seconds. To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. ¾ Manual Edit: This field represents manual editing of each camera for motion. To change this, simply use the Jog Dial on the DVR. Press the E ...

  • EverFocus EDSR1600F - page 29

    EVERFOCUS ELECTRONICS CORPORATION Diagram 12  To exit this screen after you have finished editing simply press the MENU button. 24 ...

  • EverFocus EDSR1600F - page 30

    EVERFOCUS ELECTRONICS CORPORATION R ecor d Setting Menu Diagram 13 Diagram thirteen is a screen shot of the R ecord Setting Menu. This menu contains the speed and quality for recordin g all the time. In the Record Setting Menu the following fields are defined as: ¾ Normal Reco rd: o Speed: Th is field represents the sp eed at which the recorder w ...

  • EverFocus EDSR1600F - page 31

    EVERFOCUS ELECTRONICS CORPORATION  Lower : 15KB  Low : 19KB  Basic : 23KB  Standard : 27KB  High : 31KB  Superior : 35KB To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. o Disk Full: This field represents what to do when the Hard Disk Drive gets full. In this case the default is s et ...

  • EverFocus EDSR1600F - page 32

    EVERFOCUS ELECTRONICS CORPORATION  High : 31KB  Superior : 35KB To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. ¾ Pre -Alarm Record: o Operation: This field is to s et the option of turning pre-alarm recording on or off. If Operation is turned on the DVR will respond by recording 5 seconds befo ...

  • EverFocus EDSR1600F - page 33

    EVERFOCUS ELECTRONICS CORPORATION Netw or k Setting Menu Diagram 14 Diagram fourteen is a screen shot of the Network Setting Menu. This menu is for setting up the configuration for network ing to the DVR. Please refer to the Networking Chapter of this ma nual to fully understand how to setup your network for this DVR. In the Network S etting Menu t ...

  • EverFocus EDSR1600F - page 34

    EVERFOCUS ELECTRONICS CORPORATION ¾ Net mask: This field is to set the su bnet mask for your network so as the DVR will be recognized within the n etwork. Example: 255.255.255.000. To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. ¾ Gateway: This fie ld is to set the gateway for your network so the DV ...

  • EverFocus EDSR1600F - page 35

    EVERFOCUS ELECTRONICS CORPORATION Contr ol Setting Menu Diagram 15 Diagram fifteen is a screen s hot of the Control Setting Menu . This menu is for setting up a connection from the digita l recorder to a computer to transfer instructions or information using the HyperTerminal prog ram in Windows. In the Control Setting Menu the following fields are ...

  • EverFocus EDSR1600F - page 36

    EVERFOCUS ELECTRONICS CORPORATION ¾ RS232 Parity: This field is to select the parity level at which you will be connected. You can choose between None , Odd, or Even parity levels. Default is set to none. To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. ¾ RS232 Data Bit: Th is field is the data bit a ...

  • EverFocus EDSR1600F - page 37

    EVERFOCUS ELECTRONICS CORPORATION Buzzer Setting Menu Diagram 16 Diagram sixteen is a screen s hot of the Buzzer Setting Menu . This menu is to set the internal buzzer. In the Buzzer Setting Menu the following fiel ds are defined as: ¾ Buzzer: This field is to turn the inter nal buzzer enable or disable the internal buzzer. The default is set to e ...

  • EverFocus EDSR1600F - page 38

    EVERFOCUS ELECTRONICS CORPORATION ¾ Disk Full: This field is to turn th e buzzer on or off when the Hard Disk Drive is full. To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. ¾ Video Loss: This opt ion is to turn the buzzer on or off when the DVR experiences video loss. To change this, simply use the ...

  • EverFocus EDSR1600F - page 39

    EVERFOCUS ELECTRONICS CORPORATION Ar chiv e Setting Menu Diagram 17 Diagram seventeen is a screen shot of the Archive Setting Menu. This menu is for setting up the way in which video is arch ived within the machine. In the Archive Setting Menu the following fi elds are defined as follows: ¾ Picture Size: This field is to set the picture size for c ...

  • EverFocus EDSR1600F - page 40

    EVERFOCUS ELECTRONICS CORPORATION ¾ Time Stamp Posit ion: This field is to set the position of the time stamp. You can set the time position either on top or bottom. The default is set to top. To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. ¾ Water Mark: This option is to turn water mark on or off w ...

  • EverFocus EDSR1600F - page 41

    EVERFOCUS ELECTRONICS CORPORATION Ma trix Setting Menu (onl y on EDSR-900 and EDSR- 1600) Diagram 18 Diagram 19 Diagram 20 Diagrams eighteen through nineteen are screen shots of the Matrix Setting Menu. This menu is for setting up the way in which vi deo is sequenced through the matrix monitor and call monitor outputs. In the Matrix Setting Menu th ...

  • EverFocus EDSR1600F - page 42

    EVERFOCUS ELECTRONICS CORPORATION  Channel: Represents the channels yo u want to be displayed in full screen on this output. To change th is, simply use the Jog Dial on the DVR. Press the Enter key to make your selection.  Dwell Time: This field represents the rate at which the cameras will sequence on the call monitor. The dwell time for the ...

  • EverFocus EDSR1600F - page 43

    EVERFOCUS ELECTRONICS CORPORATION Disk Setting Menu Diagram 21 Diagram 21 is a screen shot of the Disk Setting Menu. This menu is for viewing Disk information and formatting the disks. In the Disk Setting Me nu the following fields are defined as follows: ¾ Disk Usage : This field signifies the nu mber of Hard Drives the machine can store too. ¾ ...

  • EverFocus EDSR1600F - page 44

    EVERFOCUS ELECTRONICS CORPORATION PTZ Setting Menu Diagram 22 Diagram 22 is a screen s hot of the PTZ setting menu . PTZ control functions are accessible through the web interface. You now have the same basic controls used with the EKB series keyboards over the web in terface. This allows you to control the camera pan, tilt and zoom functions while ...

  • EverFocus EDSR1600F - page 45

    EVERFOCUS ELECTRONICS CORPORATION Connections: The Data Control cables connect to the back of the EDSR using the RS 485 Port. Depending on how your c onnections are set up and the num ber of cameras you are using, you will need to connect the data cables to Pins 3 and 6 on an y of the 2 RS-485 ports. Pin 3 being Positive (+) and pin 6 being negativ ...

  • EverFocus EDSR1600F - page 46

    EVERFOCUS ELECTRONICS CORPORATION System Setting Menu Diagram 24 Diagram 24 is a screen shot of the System Setting Menu. This menu is for setting up any additional options and restoring defaults to the digital recorder. In the System Setting Menu the following fi elds are defined as follows: ¾ Play with Audio 1 and 2: These fields are to turn on a ...

  • EverFocus EDSR1600F - page 47

    EVERFOCUS ELECTRONICS CORPORATION you into the menu options. The passwor d supports up to 6 characters. The available alphanumeric characters are:  0 to 9, A to Z, and /( ) . - * & @ : ” To change this, simply use the Jog Dial on the DVR. Press the Enter key to make your selection. ¾ Password Le vel 3: This field is the password for the s ...

  • EverFocus EDSR1600F - page 48

    EVERFOCUS ELECTRONICS CORPORATION To Load the defaults simply use the ar row buttons to change this option to yes. This will bring up a second dialog which asks you if you want t o do a load defaults again. To change this , simply use the Jo g Dial on the DVR. Press the Enter key to make your selection.  Please Note: See Load Defaults Chapter fo ...

  • EverFocus EDSR1600F - page 49

    EVERFOCUS ELECTRONICS CORPORATION Chapter 4 R e cor ding Ov er view Before continuing please be sure to have reviewed DVR Menu Setup (Chapter 3). You are now ready to begin setting up the machine for normal recording. This chapter will show you how to setup the reco rder for basic recording. Basic R ecor ding Setup ¾ Assuming you have completed th ...

  • EverFocus EDSR1600F - page 50

    EVERFOCUS ELECTRONICS CORPORATION Diagram 25 ¾ To stop reco rding simply press the Stop button.  Please Note: When the Hard Drive is full, the DVR will either stop recording automatically or overwrite fr om the beginning of the hard drive. This is all dependent on what was set in the record setti ng (see page 25). Timer R ecor ding Setup ¾ Ass ...

  • EverFocus EDSR1600F - page 51

    EVERFOCUS ELECTRONICS CORPORATION Diagram 26 ¾ To stop reco rding simply press the Stop button.  Please Note: When the Hard Drive is full, the DVR will either stop recording automatically or overwrite fr om the beginning of the hard drive. This is all dependent on what was set in the record setti ng (see page 25). Motion R ecor ding Setup ¾ As ...

  • EverFocus EDSR1600F - page 52

    EVERFOCUS ELECTRONICS CORPORATION  Please Note: Our recorders are deve loped for segment recording. One segment or motion event can record to one sector on the hard drive. Hard drives contain on average 2 56 sectors. Therefore recording on motion only you will see the Record Light going on and off you are not recording properly in motion. Th is ...

  • EverFocus EDSR1600F - page 53

    EVERFOCUS ELECTRONICS CORPORATION Alar m R ecor ding Setup ¾ Assuming you have completed the setup options in Chapter 1 and 2. Log into the DVR menu by pressing the Menu button. ¾ Once You Reach the Record Setting Menu (See Page 25) change the Recording speed and quality that best fits your application. Turning the jog dial clockwise or counter c ...

  • EverFocus EDSR1600F - page 54

    EVERFOCUS ELECTRONICS CORPORATION Chapter 5 Playbac k Ov er view Before continuing please be sure to have reviewed DVR Menu Setup (Chapter 3). You are now ready to begin setting up the machine for playback. This chapter will show you how to setup the recorder for basic playback. Basic Playbac k ¾ Assuming you have completed the setup opt ions in C ...

  • EverFocus EDSR1600F - page 55

    EVERFOCUS ELECTRONICS CORPORATION Diagram 29 ¾ Use the Jog Dial to select segmen t list and press the enter key. ¾ Diagram 30 illustrates what the segment list may look like. Use the Jog Dial to choose a segment you want to playback and press the enter key. This in turn will start playing the segment you chose. Diagram 30 ¾ To stop playing back ...

  • EverFocus EDSR1600F - page 56

    EVERFOCUS ELECTRONICS CORPORATION 2. Alarm List Playback ¾ Assuming you have completed the setup options in Chapter 1 through 4. ¾ Press the search button to enter th e search menu. (See Diagram 31) Diagram 31 ¾ Use the Jog Dial to select alarm list and press the enter key.  Please Note: If the alarm list is empty you will not be able to ente ...

  • EverFocus EDSR1600F - page 57

    EVERFOCUS ELECTRONICS CORPORATION 3. Date/Time Playback ¾ Assuming you have completed the setup options in Chapter 1 through 4. ¾ Press the search button to enter th e search menu. (See Diagram 33) Diagram 33 ¾ Use the Jog Dial to select Date/Ti me and press the enter key. ¾ Diagram 34 illustrates what the Date/Ti me field may look like. Use th ...

  • EverFocus EDSR1600F - page 58

    EVERFOCUS ELECTRONICS CORPORATION Chapter 6 Cop ying V ideo (Compact Flash Car d Archiving) Before continuing please be sure to ha ve reviewed the preceding chapters. You are now ready to copy an image or video from the DVR. This chapter will show you how to copy a still image or movie from the recorder. ¾ Please Note: Lexar Compact Flash Cards ar ...

  • EverFocus EDSR1600F - page 59

    EVERFOCUS ELECTRONICS CORPORATION ¾ Once you have stopped any type of recording on the DVR you are ready to do archive. ¾ The Second Step is to play the video you want to archive. Please refer to chapter 5 to for playing back video. ¾ Once you are in playback mode press t he pause button. You may use the jog dial to go back or forward to se lect ...

  • EverFocus EDSR1600F - page 60

    EVERFOCUS ELECTRONICS CORPORATION ¾ The Second Step is to play the video you want to archive. Please refer to chapter 5 to for playing back video. ¾ Once you are in playback mode, select th e camera and have the portion of the video you wish to copy. Then press the copy button. Diagram 37 T ech Tip : When copying a movie file to a flash card, by ...

  • EverFocus EDSR1600F - page 61

    EVERFOCUS ELECTRONICS CORPORATION V iewing a Copied File ¾ First step is to play the video or image you have stored on the Compact Flash card is to take the Compact Flash card and insert it into the Compact Flash Reader which came with your digital reco rder. Insert the other end of the Flash card reader into the USB port of your computer. ¾ Open ...

  • EverFocus EDSR1600F - page 62

    EVERFOCUS ELECTRONICS CORPORATION Chapter 7 Audio Ov er view This chapter will try to give you deta ils on how to setup audio on the DVR. Before we begin the process of connecting audio to your digital recorder we should have the following items. A Line level microphone (RCA input) and speakers for playback output (RCA). You will not be able to hea ...

  • EverFocus EDSR1600F - page 63

    EVERFOCUS ELECTRONICS CORPORATION Chapter 8 Ho w to Upg r ade Fir mwar e on the D VR? This chapter will try to give you a detailed instruction on how to upgrade the DVR. This will be a helpful in completing the upgrading process. ¾ Please go to ftp://208.50.31.200 and go to DVR Firmware upgrade folder. Then click on the fold er that represents you ...

  • EverFocus EDSR1600F - page 64

    EVERFOCUS ELECTRONICS CORPORATION ¾ Using the enter button to navigate in the menu. Highlight System Upgrade turn NO to YES (use jog wheel to select). ¾ Highlight YES again and press enter (use jog wheel to select). ¾ Next to System Upgrade you will notice it say "Reading....then Programming...then Success..." ¾ Once you have read suc ...

  • EverFocus EDSR1600F - page 65

    EVERFOCUS ELECTRONICS CORPORATION Chapter 9 Netw or king Ov er view This chapter will try to give you a detailed instruction on how to network the DVR. Before we begin the process of networking your digital recorder we should have a working knowledge of what a network is and how it works. This will be a helpful in completing the networking process. ...

  • EverFocus EDSR1600F - page 66

    EVERFOCUS ELECTRONICS CORPORATION Ga teway Addr ess Each host in a LAN has a gateway. A gateway address is composed of four octets (numbers in the range of 0 to 255) separated by decimal points. The gateway address is used to uniquely identify a host or computer on the LAN which assigns the IP addresses to your n etwork. For example, a Linksys rout ...

  • EverFocus EDSR1600F - page 67

    EVERFOCUS ELECTRONICS CORPORATION Pr e-Installa tion Before we begin with the installation we must ask ourselves a few questions in order to figure out where to begin with networking our DVR’s. Do you have Hi-speed Internet? ______________ There are many types of high speed Internet available. Three commonly used ones are T1, Cable, and DSL (in o ...

  • EverFocus EDSR1600F - page 68

    EVERFOCUS ELECTRONICS CORPORATION DDNS. DDNS is a Dynamic Domain Name Server, a service that provides a central (public) database where DNS information can be stored and retrieved. It allows those using a dynamic IP address to be registered centrally so users can connect to it by name. W ha t T ype of Networ k Connection do you ha v e? Everfocus DV ...

  • EverFocus EDSR1600F - page 69

    EVERFOCUS ELECTRONICS CORPORATION Simple One to One Connection Cat 5 Cross-over-cable Crossover Ethernet Cable Pin outs: The Diagram below shows the pin conf igurations for a cross over cable. Diagram 31 Connection Procedure: ¾ The First step is to purchase or ma ke a cross over cable. We recommend purchasing one if you have never made a cross ove ...

  • EverFocus EDSR1600F - page 70

    EVERFOCUS ELECTRONICS CORPORATION ¾ Assign an IP address of 192.168.001.003 to the DVR, a Subnet mask of 255.255.255.000, and a default gateway of 192.168.001.001. ¾ The next step is to get the computer onto the same network to do this you will need administrator access to your windows machine. ¾ To assign a static IP address in windows 2000/XP. ...

  • EverFocus EDSR1600F - page 71

    EVERFOCUS ELECTRONICS CORPORATION 66 ...

  • EverFocus EDSR1600F - page 72

    EVERFOCUS ELECTRONICS CORPORATION 67 ...

  • EverFocus EDSR1600F - page 73

    EVERFOCUS ELECTRONICS CORPORATION 68 ...

  • EverFocus EDSR1600F - page 74

    EVERFOCUS ELECTRONICS CORPORATION ¾ Once you have reached this point click ok and restart both the computer and the digital recorder. ¾ To access the DVR from the computer simply open Internet Explorer and in the address bar type: http://192.168.1.3 69 ...

  • EverFocus EDSR1600F - page 75

    EVERFOCUS ELECTRONICS CORPORATION Dir ect High Speed Modem Connection Internet DVR Hi-speed modem Cat 5 Straight Th rough Cable Straight Through Ethernet Cable Pin outs: The Diagram below shows the pin configurations for a straight cable. Diagram 32 Connection Procedure: ¾ The First step is to purchase or make a straight through cable. We recommen ...

  • EverFocus EDSR1600F - page 76

    EVERFOCUS ELECTRONICS CORPORATION ¾ Now Log into the Everfocus DVR menu and using the jog dial from the previous chapter go to the Network Setting Menu. (See page 28 for more instructions) ¾ Assign the Static IP address which you obtained from the internet service provider to the DVR, the Subnet mask from the internet service provider to the DVR, ...

  • EverFocus EDSR1600F - page 77

    EVERFOCUS ELECTRONICS CORPORATION R outer or LAN Connection Internet Hi-speed modem DVR Cat 5 Straight Th rough Cable Router Straight Through Ethernet Cable Pin outs: The Diagram below shows the pin configurations for a straight cable. Diagram 33 Connection Procedure: ¾ The First step is to purchase or make a straight through cable. We recommend p ...

  • EverFocus EDSR1600F - page 78

    EVERFOCUS ELECTRONICS CORPORATION ¾ Once you have a straight through cable plug one end into the LAN port on the back of the recorder and the other into the router. ¾ Now Log into the Everfocus DVR menu and using the jog dial from the previous chapter go to the Network Setting Menu. (See page 28 for more instructions) ¾ If you have a Linksys Rou ...

  • EverFocus EDSR1600F - page 79

    EVERFOCUS ELECTRONICS CORPORATION ¾ Please Note: Make sure the modem is in bridge mode. If your Internet Service Provider is BellSouth you will have a modem/router. BellSouth provides a Westell modem that includes a built-in router. You will need to disable the router functionality. ¾ The next step is to open ports within your router. Open virtua ...

  • EverFocus EDSR1600F - page 80

    EVERFOCUS ELECTRONICS CORPORATION Chapter 10 Linksys P or t F orw ar ding This chapter will cover a few simple configurations for the Linksys router. Please understand we do not support this product and will not give tech support on it. If you need Technical support on this router you must call Linksys. This Chapter is to offer some help to the ins ...

  • EverFocus EDSR1600F - page 81

    EVERFOCUS ELECTRONICS CORPORATION The first screen that appears displays the Setup tab. This allows you to change the Router's general settings. Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. The Applications and Gaming Tab allows you to set up public s ...

  • EverFocus EDSR1600F - page 82

    EVERFOCUS ELECTRONICS CORPORATION Application - In this field, enter the name you wish to give the application. Each name can be up to 12 characters. Start/End - This is the port range. Enter the number that starts the port range under Start and the number that ends the range under End . Protocol - Enter the protocol used for this application, eith ...

  • EverFocus EDSR1600F - page 83

    EVERFOCUS ELECTRONICS CORPORATION DVR 3333 to 3333 Both 192.168.1.50 Enable DVR 4444 to 4444 Both 192.168.1.50 Enable DVR 6666 to 6666 Both 192.168.1.50 Enable ¾ If your Internet Service Provider Bloc ks port 80. Simply do the following:  Go to Networking setting menu and change the HTTP port 0080 to 8100 and press menu twice to exit from menu ...

  • EverFocus EDSR1600F - page 84

    EVERFOCUS ELECTRONICS CORPORATION DDNS Service - From this pull-down me nu, enter the DDNS service with which you have membership. User Name - Enter the User Name for your DDNS account. Password - Enter the Password for your DDNS account. Host Name - The is the DDNS URL assi gned by the DDNS service. Internet IP Address - This is the Router ’s cu ...

  • EverFocus EDSR1600F - page 85

    EVERFOCUS ELECTRONICS CORPORATION Chapter 11 D-Link P or t F orwar ding This chapter will cover a few simple configurations for the D-Link router. Please understand we do not support this product and will not give tech support on it. If you need Technical support on this router you must call D-Link. This Chapter is to offer some help to the install ...

  • EverFocus EDSR1600F - page 86

    EVERFOCUS ELECTRONICS CORPORATION ¾ The next step is to open ports within your router. Go to Virtual Server in the router. Example1: Protocol Type - The protocol used for the virtual service. Public Port - The port number on the WAN (Wid e Area Network) side that will be used to access the virtual service. Private Port - The port number of the ser ...

  • EverFocus EDSR1600F - page 87

    EVERFOCUS ELECTRONICS CORPORATION Name - Enter the name referencing the virtual se rvice Private IP - The server computer in the LAN (Local Area Network) that will be providing the virtual services. If you have a Web server that you wanted Internet users to access at all times, you would n eed to enable it. Web (HTTP) server is on LAN (Local Area N ...

  • EverFocus EDSR1600F - page 88

    EVERFOCUS ELECTRONICS CORPORATION Dynamic DNS Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. This is a useful feature since many computers do not use a static IP address. ¾ To setup Dynamic DNS simple go to Tools and the Misc. At the bottom of the screen you will be able to enable DynDNS. ¾ Once y ...

  • EverFocus EDSR1600F - page 89

    EVERFOCUS ELECTRONICS CORPORATION Chapter 12 DDNS This chapter will cover a few simple configurations for setting up DDNS. Please understand we do not support this product and will not give tech support on it. If you need Technical support on DDNS you must call Linksys or D-Link. This Chapter is to offer some help to the installer and end user noth ...

  • EverFocus EDSR1600F - page 90

    EVERFOCUS ELECTRONICS CORPORATION ¾ This is where you file out the information DynDNS requires. You will then receive an email to confirm yo ur account once you confirm you will login into DynDNS.org. ¾ After you have logged in click on click on the account tab and the click on Add Host link right next to Dynamic DNS. ¾ The next step is to add a ...

  • EverFocus EDSR1600F - page 91

    EVERFOCUS ELECTRONICS CORPORATION ¾ To access the DVR from a computer simply open Internet Explorer and in the address bar type: http:// The DDNS you created example everfocu.homeip.net 86 ...

  • EverFocus EDSR1600F - page 92

    EVERFOCUS ELECTRONICS CORPORATION Chapter 13 V iewing thr ough Inter net Explor er ¾ To access the DVR from a computer simply open Internet Explorer and in the address bar type: http:// (LAN or IP address of your internet service provider) ¾ The digital video login page will appear on the screen similar to the one shown above. ¾ User must enter ...

  • EverFocus EDSR1600F - page 93

    EVERFOCUS ELECTRONICS CORPORATION ¾ Then click on the submit button and you will be logged into your recorder. Main Screen 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 88 ...

  • EverFocus EDSR1600F - page 94

    EVERFOCUS ELECTRONICS CORPORATION 19. Refresh to get recorded data. 20. PTZ control. ¾ Please Note: If any icon is grayed, it means that particular function is not accessible. Playback by Segment list 89 ...

  • EverFocus EDSR1600F - page 95

    EVERFOCUS ELECTRONICS CORPORATION Playback by Alarm list Playback by Date and Time PTZ Control 90 ...

  • EverFocus EDSR1600F - page 96

    EVERFOCUS ELECTRONICS CORPORATION Chapter 14 Interf ace Specifica tions This Digital Video Record er may be contr olled by a com puter or a terminal via the standard D- SUB 9-pin RS-232 connector.  D-SUB 9-pin connec tor specifications:  The pin assignment of the 9-pin D-SUB connector 91 ...

  • EverFocus EDSR1600F - page 97

    EVERFOCUS ELECTRONICS CORPORATION T r ansmission Setting There are 6 different speeds that can be used to transmit instruction or information through the RS232/RS485 port on the device, 1200 baud, 2400 baud, 4800 baud, 9600 baud, 19200 baud, and 3840 baud. The default setting from the factory is 9600 baud. Please refer to RS232/RS485 Setting Menu o ...

  • EverFocus EDSR1600F - page 98

    93 ...

  • EverFocus EDSR1600F - page 99

    Remote keys (Opcode= 0x4B) Data1 KEY 0x00 CH1 0x01 CH2 0x02 CH3 0x03 CH4 0x04 MODE 0x05 ZOOM 0x06 SEQ 0x07 MENU 0x08 REC 0x09 REV. PLAY 0x0A STOP 0x0B PLAY 0x0C PAUSE 0x0D SEARCH 0x0E COPY 0x0F DISPLAY 0x10 SHUTTLE <<x1 0x11 SHUTTLE <<x2 0x12 SHUTTLE <<x4 0x13 SHUTTLE <<x8 0x14 SHUTTLE <<x16 0x15 SHUTTLE <<x32 0x ...

  • EverFocus EDSR1600F - page 100

    Matrix command (Opcode= 0x4D) D ata1 Matrix Function 0x00 M atrix Mon0 – CH01 spot 0x01 M atrix Mon0 – CH02 spot 0x02 M atrix Mon0 – CH03 spot 0x03 M atrix Mon0 – CH04 spot 0x04 M atrix Mon0 – CH05 spot 0x05 M atrix Mon0 – CH06 spot 0x06 M atrix Mon0 – CH07 spot 0x07 M atrix Mon0 – CH08 spot 0x08 M atrix Mon0 – CH09 spot 0x09 M at ...

  • EverFocus EDSR1600F - page 101

    Appendix A Re m o t e C o n t r o l 96 ...

  • EverFocus EDSR1600F - page 102

    Appendix B Time La pse Mode R ecor ding Time 97 ...

  • EverFocus EDSR1600F - page 103

    98 ...

  • EverFocus EDSR1600F - page 104

    Appendix C Alar m Boar d Configur a tion 99 ...

  • EverFocus EDSR1600F - page 105

    Appendix D RJ45 (RS485) Pin Assignment 100 ...

  • EverFocus EDSR1600F - page 106

    T roubleshooting If you have difficulty operating your syst em, run through the following checklist to see if you can solve the problem.  The DVR will not go into record mode?  Make sure the HDD is locked in with the k eys. Also check t o make sure the hard drives are set to Master. A diagra m located on the H ard Drive Label will show you ho ...

  • EverFocus EDSR1600F - page 107

    3. If you are using a ro uter are the ports in your router opened? ( NOTE: Please be sure that ports 80 , 1111, 2222, 3333, 4444, 6666 are open .) 4. If you are using Windows X P please update t he Java Virtual Machine. This can be done by going to http://java.sun.com /downloads/index.html and downloading the file called JavaVM.  If you have a D ...

  • EverFocus EDSR1600F - page 108

    Most F r equentl y ask Questions: Q. How can I go to full screen mode o ver the network? A. You can s witch to full screen mode, b y clicking on full screen on the right bottom off of your screen. Q. On full scree n mood how can I change to a different camera ov er the network? A. Once you ar e on the full screen mode, you can do a right click on t ...

  • EverFocus EDSR1600F - page 109

    Q. How can I erase everything fro m My Hard Dri ve? A. You can do a disk renew under Disk menu for EDSR 1600/900/600/400F Q. I am recording on motio n only, but only ge tting a few hours of recording time on my Hard Drive. Why? A. If you are recording on mot ion only, you need to turn ON Permanent recordi ng opti on from record setting menu and per ...

  • EverFocus EDSR1600F - page 110

    Q. What is the maximum cable distance for coaxial cable? RG59 Mini 22AWG Solid wire 200 ft (approximately) RG59/U 20 AWG Solid wire 750 ft (approximately) RG6/U 18 AWG Solid wire 1000 ft (approximately) RG 11/U 14 AWG Solid wire 1500 ft (approximately) Q. What is the maximum distance I can run 24V AC? A . The maximum distance dep ends o n the wire ...

  • EverFocus EDSR1600F - page 111

    ...

  • EverFocus EDSR1600F - page 112

    EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, European Office: Hsi-Chi, Taipei, Taiwan Albert-Einstein-Strasse 1, Phone: 886 (0) 2-269823 34 D-46446 Emmerich, Germany Fax: 886 (0) 2-26982380 Tel: 49 (0) 2822-93940 Web: http://www.EverFocus.com.tw/ Fax: 49 (0) 2822-939495 Web: http://www.EverFocus.de US (West Coast) Of ...

Manufacturer EverFocus Category Boiler

Documents that we receive from a manufacturer of a EverFocus EDSR1600F can be divided into several groups. They are, among others:
- EverFocus technical drawings
- EDSR1600F manuals
- EverFocus product data sheets
- information booklets
- or energy labels EverFocus EDSR1600F
All of them are important, but the most important information from the point of view of use of the device are in the user manual EverFocus EDSR1600F.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals EverFocus EDSR1600F, service manual, brief instructions and user manuals EverFocus EDSR1600F. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product EverFocus EDSR1600F.

Similar manuals

A complete manual for the device EverFocus EDSR1600F, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use EverFocus EDSR1600F by users. Manuals are usually written by a technical writer, but in a language understandable to all users of EverFocus EDSR1600F.

A complete EverFocus manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual EverFocus EDSR1600F - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the EverFocus EDSR1600F, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the EverFocus EDSR1600F, that we can find in the current document
3. Tips how to use the basic functions of the device EverFocus EDSR1600F - which should help us in our first steps of using EverFocus EDSR1600F
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with EverFocus EDSR1600F
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of EverFocus EDSR1600F in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning EverFocus EDSR1600F?

Use the form below

If you did not solve your problem by using a manual EverFocus EDSR1600F, ask a question using the form below. If a user had a similar problem with EverFocus EDSR1600F it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)