English dropdown-ico

Manual Dell D08S

61 pages 6.86 mb
Download

Go to site of 61

Summary
  • Dell D08S - page 1

    Dell OptiPlex 3020–Small Form Factor Owner's Manual Regulatory Model: D08S Regulatory Type: D08S001 ...

  • Dell D08S - page 2

    Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2013 Dell Inc ...

  • Dell D08S - page 3

    Contents 1 Working on Your Computer ................................................................................. 5 Before Working Inside Your Computer .............................................................................................5 Turning Off Your Computer ......................................................................... ...

  • Dell D08S - page 4

    Removing the Processor ................................................................................................................. 29 Installing the Processor .................................................................................................................. 30 Removing the Intrusion Switch ..................................... ...

  • Dell D08S - page 5

    1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist: • You have read the safety information that ...

  • Dell D08S - page 6

    3. Disconnect all network cables from the computer. 4. Disconnect your computer and all attached devices from their electrical outlets. 5. Press and hold the power button while the computer is unplugged to ground the system board. 6. Remove the cover. CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted m ...

  • Dell D08S - page 7

    CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the computer. 2. Connect any telephone or network cables to your computer. 3. Connect your computer and all attached devices to their electrical outlets. 4. Turn on your computer. 5. If required, verify that the computer works correctly by runnin ...

  • Dell D08S - page 8

    8 ...

  • Dell D08S - page 9

    2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Recommended Tools The procedures in this document may require the following tools: • Small flat-blade screwdriver • Phillips screwdriver • Small plastic scribe System Overview The figure below displays ...

  • Dell D08S - page 10

    5. intrusion switch 6. heatsink cover 7. heatsink 8. drive cage 1. front I/O 2. system fan 3. system board 4. memory module 5. coin cell 6. speaker Removing the Cover 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the thumbscrews that secure the cover to the computer. Slide the cover from the computer. 10 ...

  • Dell D08S - page 11

    3. Lift the cover upward to a 45–degree angle and remove it from the computer. Installing the Cover 1. Place the cover on the computer. 2. Slide the computer cover towards the front of the chassis until it is fully engaged. 3. Tighten the thumbscrew in clockwise direction to secure the computer cover. 4. Follow the procedures in After Working Ins ...

  • Dell D08S - page 12

    Removing the Front Bezel 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover. 3. Pry the front bezel retention clips away from the chassis. 4. Rotate the bezel away from the computer to release the hooks on the opposite edge of the bezel from the chassis. Then, lift the chassis and remove the front bezel from the c ...

  • Dell D08S - page 13

    4. Perform the following steps as shown in the illustration: a) Pull the release lever away from the expansion card until you release the securing tab from the dent in the card. [1]. b) Ease the card up and out of its connector and remove it from the computer. [2]. 13 ...

  • Dell D08S - page 14

    Installing The Expansion Card 1. Insert the expansion card into the connector on the system board and press down to secure it in place. 2. Install the cover 3. Follow the procedures in After Working Inside Your Computer . Removing the Optical Drive 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover. 3. Disconnect ...

  • Dell D08S - page 15

    5. Flex the optical-drive bracket and then lift the optical drive from the bracket 6. Repeat steps 3 to 5 to remove the second optical drive (if available). Installing the Optical Drive 1. Insert the optical drive into the bracket. 2. Slide the optical drive to insert it into the drive cage. 3. Connect the data and power cables to the optical drive ...

  • Dell D08S - page 16

    4. Slide the blue drive-cage handle toward unlock position and lift the hard drive cage from the computer. Installing the Drive Cage 1. Place the drive cage on the edge of the computer to allow access to the cable connectors on the hard drive. 2. Connect the data and power cables to the back of the hard drive. 3. Flip over the drive cage and insert ...

  • Dell D08S - page 17

    6. Follow the procedures in After Working Inside Your Computer . Removing the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) cover b) optical drive c) drive cage 3. Perform the following steps as shown in the illustration: and a) Press the retention clips inwards [1]. b) Slide the hard-drive bracket o ...

  • Dell D08S - page 18

    Installing the Hard Drive 1. Tighten the screws to secure the mini hard drive (if available) to the hard-drive bracket. 2. Flex the hard-drive bracket and then insert the hard drive into the bracket. 3. Slide the hard-drive bracket into the drive cage. 4. Install the: a) drive cage b) optical drive c) cover 5. Follow the procedures in After Working ...

  • Dell D08S - page 19

    Installing the Speaker 1. Place the speaker at the appropriate location on the chassis. 2. Press the speaker-securing tab and slide the speaker towards the left of the computer to secure it. 3. Guide the speaker cable through the securing tab and connect the speaker cable to the system board. 4. Install the: a) drive cage b) optical drive c) cover ...

  • Dell D08S - page 20

    Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover. 3. Press down on the memory retaining tabs on each side of the memory modules, and lift the memory modules out of the connectors on the system board. Installing the Memory 1. Align the notch on the memory-card with the tab in the system-board ...

  • Dell D08S - page 21

    Installing the System Fan 1. Place the system-fan in the chassis. 2. Pass the grommets through the chassis and slide outward along the groove to secure it in place. 3. Connect the system-fan cable to the system board. 4. Install: a) front bezel b) drive cage c) optical drive d) cover 5. Follow the procedures in After Working Inside Your Computer . ...

  • Dell D08S - page 22

    4. Perform the following steps as shown in the illustration: a) Press the clips on both side of the power switch [1]. b) Release it from the chassis [2]. c) Remove the power switch along with its cable from the computer Installing the Power Switch 1. Slide the power switch in through the front of the computer. 2. Connect the power-switch cable to t ...

  • Dell D08S - page 23

    c) front bezel d) cover 4. Follow the procedures in After Working Inside Your Computer . Removing the I/O Panel 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) cover b) optical drive c) drive cage d) front bezel 3. Perform the following steps as shown in the illustration: a) Disconnect the I/O cable the computer ...

  • Dell D08S - page 24

    Installing the I/O Panel 1. Insert the I/O panel into the slot on the chassis front. 2. Slide the I/O panel to secure it to the chassis. 3. Tighten the screw to secure the I/O panel to the chassis. 4. Connect the I/O panel, audio cable, and fan shelter clip to the system board. 5. Install the: a) drive cage b) optical drive c) front bezel d) cover ...

  • Dell D08S - page 25

    4. Release the blue latch from the system. 5. Remove the screws that secure the power supply to the back of the computer 25 ...

  • Dell D08S - page 26

    6. Perform the following steps as shown in the illustration: a) Press the latch downwards to release the power supply unit [1]. b) Slide the power supply unit from the computer [2]. 7. Lift the power supply out of the computer. 26 ...

  • Dell D08S - page 27

    Installing the Power Supply 1. Place the power supply in the chassis and slide towards the back of the computer to secure it. 2. Tighten the screws securing the power supply to the back of the computer. 3. Connect the 4-pin and 8–pin power cables to the system board. 4. Thread the power cables into the chassis clips. 5. Install: a) drive cage b) ...

  • Dell D08S - page 28

    Installing the Coin-Cell Battery 1. Place the coin-cell battery into its slot on the system board. 2. Press the coin-cell battery downward until the release latch springs back into place and secures it. 3. Install the: a) drive cage b) front bezel c) cover 4. Follow the procedures in After Working Inside Your Computer . Removing the Heatsink Assemb ...

  • Dell D08S - page 29

    Installing the Heatsink Assembly 1. Place the heat-sink assembly into the chassis. 2. Tighten the captive screws to secure the heat-sink assembly to the system board. 3. Connect the fan cable to the system board. 4. Place the fan shroud on the fan and push to click in place. 5. Install the cover 6. Follow the procedures in After Working Inside Your ...

  • Dell D08S - page 30

    Installing the Processor 1. Insert the processor into the processor socket. Ensure the processor is properly seated. 2. Gently lower the processor cover. 3. Press the release lever down and then move it inward to secure it with the retention hook. 4. Install the heat-sink assembly. 5. Install the cover. 6. Follow the procedures in After Working Ins ...

  • Dell D08S - page 31

    System Board Components The following image displays the system board layout. 1. PCI Express x16 connector 2. PCI Express x1 connector 3. intrusion-switch connector 4. PS/2, serial connector 5. power connector 6. processor socket 7. CPU fan connector 8. memory module connectors 9. HDD LED & chassis detect connector 10. power switch connector 11 ...

  • Dell D08S - page 32

    Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) cover b) front bezel c) optical drive d) drive cage e) memory f) heat sink assembly g) expansion card(s) h) power supply 3. Disconnect all the cables connected to the system board, and move the cables away from the chassis. 4. Turn the hex ...

  • Dell D08S - page 33

    5. Lift the cover upward to a 45–degree angle and remove it from the computer. 6. Remove the system board from the chassis. 33 ...

  • Dell D08S - page 34

    Installing the System Board 1. Align the system board to the port connectors on the rear of the chassis and place the system board in the chassis. 2. Tighten the screws securing the system board to the chassis. 3. Connect the cables to the system board. 4. Install the: a) power supply b) expansion card(s) c) heat sink assembly d) memory e) drive ca ...

  • Dell D08S - page 35

    3 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hardware • View the system hardware configuration • Enable or disable integrated devices • Set performance and power management thresholds • Manage ...

  • Dell D08S - page 36

    Table 1. Navigation Keys Keys Navigation Up arrow Moves to the previous field. Down arrow Moves to the next field. <Enter> Allows you to select a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop ‐ down list, if applicable. <Tab> Moves to the next focus area. NOTE: For th ...

  • Dell D08S - page 37

    Option Description – UEFI Advanced Boot Options Allows you to Enable Legacy Option ROMs • Enabled (Default) Date/Time Allows you to set the date and time. The changes to the system date and time takes effect immediately. Table 3. System Configuration Option Description Integrated NIC Allows you to configure the integrated network controller. Th ...

  • Dell D08S - page 38

    Option Description part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. • Enable SMART Reporting - This option is disabled by default. USB Configuration Allows you to enable or disable the internal USB configuration. The options are: • Enable Boot Support • Enable Front USB Ports • Enable USB 3.0 Ports • En ...

  • Dell D08S - page 39

    Option Description • Enter the new password • Confirm the new password Strong Password Enable strong password - This option is disabled by default. Password Configuration This field controls the minimum and maximum number of characters allowed for the admin and system passwords. • Admin Password Min • Admin Password Max • System Password ...

  • Dell D08S - page 40

    Option Description • Enable CPU XD Support - This option is enabled by default. Admin Setup Lockout Allows you to enable or disable the option to enter setup when an admin password is set. • Enable Admin Setup Lockout - This option is not set by default. HDD Protection Support Allows you to enable or disable the HDD Protection feature • HDD P ...

  • Dell D08S - page 41

    Table 7. Performance Option Description Multi Core Support Specifies whether the process will have one or all cores enabled. The performance of some applications will improve with the additional cores. • All - Enabled by default • 1 • 2 Intel SpeedStep Allows you to enable or disable the Intel SpeedStep feature. Default Setting: Enable Intel ...

  • Dell D08S - page 42

    Option Description • Enabled in S5 only • Enabled in S4 and S5 Enabled Fan Speed Control Controls the speed of the system fan. This option is disabled by default. NOTE: When enabled, the fan runs at full speed. USB Wake Support This option allows you to enable USB devices to wake the computer from standby. • Enable USB Wake Support - This opt ...

  • Dell D08S - page 43

    Table 11. Maintenance Option Description Service Tag Displays the service tag of your computer. Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default. SERR Messages Controls the SERR message mechanism. This option is not set by default. Some graphics cards require that the SERR messa ...

  • Dell D08S - page 44

    Option Description NOTE: This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer and when Client DHCP is set to Static IP . Advanced Specifies for Advanced debugging • Verbose Mode (Disabled) NOTE: This Option is only relevant when the integrated NIC control in the System Co ...

  • Dell D08S - page 45

    Clearing Forgotten Password The system's software security features include a system password and a setup password. The password jumper disables any password(s) currently in use. There are 3–pins for the password reset jumper. 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the cover. 3. Identify the password rese ...

  • Dell D08S - page 46

    Password Type Description Setup password Password that you must enter to access and make changes to the BIOS settings of your computer. CAUTION: The password features provide a basic level of security for the data on your computer. CAUTION: Anyone can access the data stored on your computer if it is not locked and left unattended. NOTE: Your comput ...

  • Dell D08S - page 47

    The System Security screen is displayed. 2. In the System Security screen, verify that Password Status is Unlocked . 3. Select System Password , alter or delete the existing system password and press <Enter> or <Tab>. 4. Select Setup Password , alter or delete the existing setup password and press <Enter> or <Tab>. NOTE: If ...

  • Dell D08S - page 48

    48 ...

  • Dell D08S - page 49

    4 Diagnostics If you experience a problem with your computer, run the ePSA diagnostics before contacting Dell for technical assistance. The purpose of running diagnostics is to test your computer's hardware without requiring additional equipment or risking data loss. If you are unable to fix the problem yourself, service and support personnel ...

  • Dell D08S - page 50

    50 ...

  • Dell D08S - page 51

    5 Troubleshooting Your Computer You can troubleshoot your computer using indicators like Diagnostic Lights, Beep Codes, and Error Messages during the operation of the computer. Power LED Diagnostics The power button LED located on the front of the chassis also functions as a bicolored diagnostic LED. The diagnostic LED is only active and visible du ...

  • Dell D08S - page 52

    Amber LED State Description 3,6 possible system board resource and/or hardware failure 3,7 some other failure with messages on screen Beep Code The computer can emit a series of beeps during start-up if the display does not show errors or problems. These series of beeps, called beep codes, identify various problems. The delay between each beep is 3 ...

  • Dell D08S - page 53

    Error Message Description Bad command or file name Ensure that you have spelled the command correctly, put spaces in the proper place, and used the correct pathname. Bad error- correction code (ECC) on disk read The floppy or hard drive controller detected an uncorrectable read error. Controller has failed The hard drive or the associated controlle ...

  • Dell D08S - page 54

    Error Message Description please populate DIMM1 Keyboard failure A cable or connector may be loose, or the keyboard or keyboard/mouse controller may be faulty. Memory address line failure at address, read value expecting value A memory module may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. Memory al ...

  • Dell D08S - page 55

    Error Message Description Non-system disk or disk error The floppy disk in drive A does not have a bootable operating system installed on it. Either replace the floppy disk with one that has a bootable operating system, or remove the floppy disk from drive A and restart the computer. Not a boot diskette The operating system is trying to boot to a f ...

  • Dell D08S - page 56

    Error Message Description drive by calling your support desk or Dell. Write fault The operating system cannot write to the floppy or hard drive. Write fault on selected drive The operating system cannot write to the floppy or hard drive. 56 ...

  • Dell D08S - page 57

    6 Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For comprehensive specification of your computer go to Specifications’ section in your Owner’s Manual available on the support site at dell.com/support . For more information about the configurat ...

  • Dell D08S - page 58

    Feature Specification Volume controls volume up/down buttons, program menus, and keyboard media-control keys Table 19. Communications Feature Specification Network adapter Intel 10/100/1000 Mbps Ethernet LAN on system board Table 20. Drives Feature Specification Externally accessible: ODD is externally accessible Internally accessible HDD is intern ...

  • Dell D08S - page 59

    Feature Specification Off (no light) — the computer is not detecting a physical connection to the network. Network activity light on integrated network adapter Yellow light — A blinking yellow light indicates that network activity is present. Power supply diagnostic light Green light — The power supply is turned on and is functional. The powe ...

  • Dell D08S - page 60

    Feature Specification Altitude: Operating –15.2 m to 3048 m (–50 to 10,000 ft) Storage –15.20 m to 10,668 m (–50 ft to 35,000 ft) Airborne contaminant level G1 or lower as defined by ANSI/ISA-S71.04-1985 60 ...

  • Dell D08S - page 61

    7 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your are ...

Manufacturer Dell Category Calculator

Documents that we receive from a manufacturer of a Dell D08S can be divided into several groups. They are, among others:
- Dell technical drawings
- D08S manuals
- Dell product data sheets
- information booklets
- or energy labels Dell D08S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dell D08S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dell D08S, service manual, brief instructions and user manuals Dell D08S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dell D08S.

Similar manuals

A complete manual for the device Dell D08S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dell D08S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dell D08S.

A complete Dell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dell D08S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dell D08S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dell D08S, that we can find in the current document
3. Tips how to use the basic functions of the device Dell D08S - which should help us in our first steps of using Dell D08S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dell D08S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dell D08S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dell D08S?

Use the form below

If you did not solve your problem by using a manual Dell D08S, ask a question using the form below. If a user had a similar problem with Dell D08S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)