-
Miele CS 1322 - page 1
Operating and installation instructions Open barbeque grill CS 1312 CS 1322 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 180 420 e n-G B ...
-
Miele CS 1322 - page 2
Guide to the appliance .............................................4 CS 1312 ..........................................................4 CS 1322 ..........................................................5 Accessories supplied ...............................................6 Warning and Safety instructions .....................................7 Car ...
-
Miele CS 1322 - page 3
Preparing the worktop .............................................3 5 Installation of several appliances ....................................3 6 Fixing the spring clamps and spacer bars ............................3 8 Installing the appliance(s) ..........................................4 0 General installation tips ............................... ...
-
Miele CS 1322 - page 4
CS 1312 a Grill rack b Front heating element c Rear heating element d Lava rock container e Drain tap f Symbols to indicate which heating element the control is for g Display Controls for the heating elements: h Front i Rear Display j In-operation indicator Guide to the appliance 4 ...
-
Miele CS 1322 - page 5
CS 1322 a Grill racks b Front heating element c Rear heating element d Lava rock container e Drain tap f Symbols to indicate which heating element the control is for g Display Controls for the heating elements: h Front i Rear Display j In-operation indicator Guide to the appliance 5 ...
-
Miele CS 1322 - page 6
Accessories supplied Additional accessories can be ordered at extra cost. See "Optional accessories" for further details on ordering. Lava rocks Tongs Brush Guide to the appliance 6 ...
-
Miele CS 1322 - page 7
This appliance complies with all current local and national safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain importan ...
-
Miele CS 1322 - page 8
Correct application ~ This grill is not designed for commercial use. It is intended for use in domestic households and for similar working and residential environments such as: – Shops – Offices and showrooms and by residents in establishments such as: – Hostels and guest houses. ~ The grill is intended for domestic use only to cook food and ...
-
Miele CS 1322 - page 9
Safety with children ~ The grill is not a toy! To prevent the risk of injury, do not let children play with the appliance or its controls. ~ Children under 8 years of age must be kept away from the grill unless they are constantly supervised. ~ Children 8 years and older may use the grill only if they have been shown how to use it in a safe way and ...
-
Miele CS 1322 - page 10
Technical safety ~ Before installation, check the grill for visible signs of damage. Do not install and use a damaged appliance. It could be dangerous. ~ The electrical safety of the grill can only be guaranteed if correctly earthed. It is most important that this basic safety requirement is observed and regularly tested, and where there is any dou ...
-
Miele CS 1322 - page 11
~ Installation, maintenance and repairs may only be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations. Repairs and other work by unqualified persons could be dangerous. Miele cannot be held liable for unauthorised work. ~ During installation, maintenance and repair work, ...
-
Miele CS 1322 - page 12
~ Do not connect the grill to the mains electricity supply by a multi-socket adapter or an extension lead. These do not guarantee the required safety of the appliance (e.g. danger of overheating). ~ The grill may be connected via a fused plug and switched socket. If you wish to connect it to a fused spur connection, or if the appliance is supplied ...
-
Miele CS 1322 - page 13
~ If oil or fat does catch fire, do not attempt to put out the flames with water. Use a suitable fire blanket, saucepan lid, damp towel or similar to smother the flames. ~ Do not use the grill to heat up the room, and never switch it on with the heating element in the raised position. Due to the high temperatures radiated, objects near the applianc ...
-
Miele CS 1322 - page 14
~ Where several appliances are installed side by side Do not place hot pots or pans on the cover strip as this can damage the seal. ~ Do not cover the grill, e. g. with a cover plates, a cloth or protective foil. The material could catch fire, shatter or melt if the appliance is switched on by mistake or if it is still warm. ~ When grilling or keep ...
-
Miele CS 1322 - page 15
~ When using an electrical appliance, e.g. a hand-held food blender, near the grill, ensure that the cable of the electrical appliance does not come into contact with the hot grill. The insulation on the cable could become damaged, giving rise to an electric shock hazard. ~ Always ensure that food is sufficiently cooked or reheated. Some foods may ...
-
Miele CS 1322 - page 16
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation. Disposal of your old appli ...
-
Miele CS 1322 - page 17
Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service, data plate, guarantee" section of this booklet. Cleaning for the first time ^ Remove protective wrapping a from the heating elements and also remove any protective foil from the appliance. ^ Wash the gril ...
-
Miele CS 1322 - page 18
Grill chart The times given in the table serve as a guide, based on a pre-heated grill at settings 9 to 12. The grilling time required will depend on the type of food, its texture and thickness as well as personal taste. Food Time in minutes Meat and sausages Sausages 6 - 8 Fillet steak 4 - 10 Burgers 12 - 16 Chicken drumsticks 16 - 18 Lamb chops 4 ...
-
Miele CS 1322 - page 19
Food Time in minutes Vegetables Aubergines 6 - 8 Jacket potatoes, pre-cooked 10 - 20 Vegetarian kebabs 5 - 6 Corn on the cob, pre-cooked 5 - 8 Peppers, cut into strips 2 - 3 Tomato halves 2 - 4 Fruit Pineapple slices 2 - 3 Apple slices 2 - 3 Miscellaneous Toast 2 - 3 Tofu 4 - 6 Operation 19 ...
-
Miele CS 1322 - page 20
Preparing the grill The grill can be used with or without the lava rocks. Without the lava rocks the rising steam keeps the food being grilled moist. Grilling with the lava rocks creates a particularly intensive aroma. ^ Check that the drain tap is closed. ^ Remove the rack (or racks, depending on model), lift up the heating elements, and if not be ...
-
Miele CS 1322 - page 21
Grilling When grilling, keep an eye on the level of water in the trough. If necessary, add more water. When grilling or keeping food warm, do not use grill pans, griddles, saucepans or similar on the open grill, and never cover the rack(s) (e.g. with aluminium foil). The resulting build-up of heat could damage the rack(s). ^ Turn one or both contro ...
-
Miele CS 1322 - page 22
Overheating protection An overheating protection automatically switches the appliance off if the water level drops too low. ^ Add some cold water. As soon as the appliance has cooled down, the heating elements switch back on again and you can continue grilling. Safety cut-out A safety cut-out ensures that the grill elements only heat up when they a ...
-
Miele CS 1322 - page 23
Miele offer a range of branded cleaning and conditioning agents for your appliance. See "Optional accessories". , Do not use a steam cleaning appliance to clean this appliance. The steam could reach electrical components and cause a short circuit. Clean the appliance regularly, preferably after each use. Allow the appliance to cool down t ...
-
Miele CS 1322 - page 24
Stainless steel The Miele ceramic and stainless steel hob cleaning agent is suitable for cleaning stainless steel surfaces (see "Optional accessories"). To help prevent resoiling, we recommend a stainless steel conditioning agent (see "Optional accessories"). Apply sparingly with a soft cloth. Do not use stainless steel cleaning ...
-
Miele CS 1322 - page 25
Grill trough Clean the grill trough after each use. ^ After grilling, allow the water in the trough to cool down before draining it. ^ Place a container large enough to take the contents of the trough under the drain. ^ Open the drain tap under the grill by turning it anti-clockwise a . ^ Once all the water has drained, turn off the tap by turning ...
-
Miele CS 1322 - page 26
Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. What ...
-
Miele CS 1322 - page 27
Miele offer a comprehensive range of useful accessories as well as cleaning and conditioning products for your Miele appliances. These can be ordered online at: or from Miele (see back cover for contact details) Griddle CSGP 1300 Cast-iron griddle to place on top of the CS 1312 grill, with a flat and a fluted side Griddle CSGP 1400 Cast-iron griddl ...
-
Miele CS 1322 - page 28
Handle Lava rocks Cleaning and care products Ceramic and stainless steel hob cleaner 250 ml Removes heavy soiling, limescale deposits and light discolouration Stainless steel conditioning agent 250 ml Removes water marks, flecks and finger prints. Helps prevent re-soiling. E-cloth (microfibre cloth) Removes finger marks and light soiling. Optional ...
-
Miele CS 1322 - page 29
To avoid the risk of damaging the barbecue grill fit the wall units and extractor hood before installing it. ~ The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C heat-resistant adhesive which will not dissolve or distort. Any backmoulds must be of heat-resistant material. ~ This appliance must not b ...
-
Miele CS 1322 - page 30
Safety distance above the grill A minimum safety distance must be maintained between the grill and the cooker hood above it. See the cooker hood manufacturer’s operating and installation instructions for details. If the manufacturer’s instructions are not available for the cooker hood, then a minimum safety distance of at least 760 mm must be m ...
-
Miele CS 1322 - page 31
Safety distances to the sides of the grill Ideally the grill should be installed with plenty of space on either side. There may be a wall at the rear and a tall unit or wall at one side. On the other side, however, no unit or divider should stand higher than the built-in appliance (see illustrations). Due to the high temperatures radiated by the gr ...
-
Miele CS 1322 - page 32
Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e. g. wood) a minimum safety distance e of 50 mm must be maintained betwee ...
-
Miele CS 1322 - page 33
CS 1312 a Spring clamps b Front c Casing depth d Casing depth including mains connection box with mains connection cable, L = 1440 mm e Drain tap Appliance and building-in dimensions 33 ...
-
Miele CS 1322 - page 34
CS 1322 a Spring clamps b Front c Casing depth d Casing depth including mains connection box with mains connection cable, L = 1440 mm e Drain tap Appliance and building-in dimensions 34 ...
-
Miele CS 1322 - page 35
^ Make the worktop cut-out for one or more appliances as applicable. Remember to maintain a minimum safety distance from the back wall , as well as from any tall unit or side wall to the right or left of the appliance. See "Safety instructions for installation". ^ Seal the cut surfaces with a suitable heat-resistant sealant to avoid swell ...
-
Miele CS 1322 - page 36
When installing two or more appliances next to each other a spacer bar b must be used between each one. See "Fixing the spring clamps and spacer bars". Worktop cut-out - two appliances Worktop cut-out - three appliances To calculate the cut-out width (D) required: Add up the widths of each appliance (e.g. 288 mm, 380 mm) and subtract 16 m ...
-
Miele CS 1322 - page 37
a Spring clamps b Spacer bars c Gaps between spacer bars and worktop d Cover strips The illustration shows a worktop cut-out with spring clamps a and spacer bars b for 3 appliances. An additional spacer bar is required for each additional appliance. The position for securing each additional spacer bar will depend on the width of appliance B (288 mm ...
-
Miele CS 1322 - page 38
Wooden worktops ^ Position the spring clamps supplied a and spacer bars b on the top edge of the cut-out in the positions marked. ^ Secure the spring clamps and spacer bars with the 3.5 x 25 mm screws supplied. Fixing the spring clamps and spacer bars 38 ...
-
Miele CS 1322 - page 39
Granite and marble worktops The screws are not required for granite or marble worktops. ^ Position and secure the spring clamps a and spacer bars b using strong, double-sided adhesive tape c . ^ Apply silcone to the side edges and the lower edges of spring clamps a and spacer bars b . ^ Then fill gap e between the spacer bars and the worktop with s ...
-
Miele CS 1322 - page 40
^ Feed the connection cable down through the cut-out. ^ Starting at the front, position the appliance in the worktop cut-out. ^ Using both hands, press down evenly on the sides of the appliance until it clicks into position. When doing this make sure that the seal under the appliance sits flush with the worktop on all sides. This is important to en ...
-
Miele CS 1322 - page 41
Seal between the appliance and the worktop The sealing strip under the edge of the top part of the appliance provides a sufficient seal for the worktop. The appliance must not be sealed with sealant (e.g. silicone). This could result in damage to the appliance or the worktop if it ever needs to be removed for servicing. Tiled worktop Grout lines a ...
-
Miele CS 1322 - page 42
All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). If the connection cable is damaged, it must be replaced by a suitably qualified electrician with a special connection cable of type H 05 V V-F (pvc insulated), available ...
-
Miele CS 1322 - page 43
Important The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system, which complies with local and national regulations. It is most important that this basic safety requirement is present and tested regularly and if there is any doubt the electrical wiring in th ...
-
Miele CS 1322 - page 44
In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact: – Your Miele dealer, or – the Miele Service Department (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial ...
-
Miele CS 1322 - page 45
45 ...
-
Miele CS 1322 - page 46
46 ...
-
Miele CS 1322 - page 47
47 ...
-
Miele CS 1322 - page 48
Alteration rights reserved/ 4111 M.-Nr. 07 180 420 / 12 ...
Do you have a question concerning Miele CS 1322?
Use the form below
If you did not solve your problem by using a manual Miele CS 1322, ask a question using the form below. If a user had a similar problem with Miele CS 1322 it is likely that he will want to share the way to solve it.