Manual Linksys 10/100

42 pages 0.85 mb
Download

Go to site of 42

Summary
  • Linksys 10/100 - page 1

    Instant EtherFast ® Series EtherFast ® 10/100 LAN Card Use this guide to install: LNE100TX ver . 5 User Guide ...

  • Linksys 10/100 - page 2

    COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. EtherFast is a register ed trademark of Linksys. Microsoft, Windows, and the Windows logo ar e register ed trademarks of Microsoft Corporation. All other trademarks and brand names ar e the property of their respective pr oprietors. LIMITED W ARRANTY Linksys guarantees that ...

  • Linksys 10/100 - page 3

    Linksys Instant EtherFast ® Series EtherFast ® 10/100 LAN Cards T roubleshooting 49 Common Problems and Solutions 49 Running the Card's Diagnostics 53 Appendix 54 Sharing Y our Files and Printers 54 Installing the Driver in Windows 95 Version A 56 Novell NetWar e 3.x Client Setup for Windows 95 or 98 57 Windows 95, 98 or ME Client for Window ...

  • Linksys 10/100 - page 4

    EtherFast ® 10/100 LAN Cards • One EtherF ast ® 10/100 LAN Card(s) • One 3.5” Driv er Disk • One User Guide and Registration Card • Quick Install for W indo ws Operating Systems 2 Linksys Instant EtherFast ® Series Introduction F ast Ether net is a relativ el y ne w standard of netw orking built specif ically for speed-intensiv e netw ...

  • Linksys 10/100 - page 5

    Installing the EtherFast ® 10/100 LAN Card Overview Each EtherF ast ® 10/100 LAN Card is equipped with an RJ-45 por t that auto- matically adjusts to either 10Mbps or 100Mbps speeds, allo wing your PC to attach to either F ast Ether net (also kno wn as 100BaseTX) or regular 10BaseT Ethernet network se gments without additional hardw are or softw ...

  • Linksys 10/100 - page 6

    EtherFast ® 10/100 LAN Cards 6. Connect one end of a twisted-pair cable to your PC at the EtherF ast ® 10/100 LAN Card's RJ-45 por t. 7. Plug the other end of the cable into one of y our netw ork’ s 10BaseT or a 100BaseTX hub or switch ports, DSL modem, cable modem, router , etc. 8. Reconnect your PC’ s po w er , then po w er on y our co ...

  • Linksys 10/100 - page 7

    EtherFast ® 10/100 LAN Cards 3. While the Update Device Driver W izard windo w is visible, put the EtherF ast ® 10/100 LAN Card Driv er Disk into your flopp y drive and click the Next button. 4. A screen will appear stating that W indo ws 95 w as unable to locate the driv- er . Click the Other Locations button to enter the driver’ s location ma ...

  • Linksys 10/100 - page 8

    EtherFast ® 10/100 LAN Cards 8. The follo wing screen will prompt you for the dri v er location. In the Cop y Files F rom: f ield , type A:WIN95 . Then, click the OK button. 9. Windo ws 95 will begin cop ying f iles to your PC. When asked if you w ant to restart your PC, remo v e the flopp y disk and click Y es. If W indo ws does not ask you to r ...

  • Linksys 10/100 - page 9

    EtherFast ® 10/100 LAN Cards 3. Click the File and Print Sharing button. The F ile and Print Sharing window will appear . 4a. If you'd like others to be ab le to access the f iles on your PC's hard dri v e, select I w ant to be ab le to giv e others access to m y f iles . 4b . If you'd like to share y our printer with other users on ...

  • Linksys 10/100 - page 10

    EtherFast ® 10/100 LAN Cards 11. Click on the Identif ication tab and the follo wing windo w will appear . T ype the name of y our computer in the Computer Name box. Choose a name that is unique from the other computer names on the netw ork. 12. T ype the name of y our w orkgroup in the W or kgr oup box. The W orkgroup name should be the same W or ...

  • Linksys 10/100 - page 11

    EtherFast ® 10/100 LAN Cards 17. A Logon windo w will appear , requiring you to enter a username and pass- w ord. Make up a username and passw ord and click the OK button. Do not press the ESC key or click the Cancel button, or you w on't be able to lo g onto the netw ork. If the a lo gon screen does not appear or if it does not allo w y ou t ...

  • Linksys 10/100 - page 12

    EtherFast ® 10/100 LAN Cards 4. Select " Sear ch f or the best driver f or your de vice (Recommended) ” and click the Next button . 5. Select “ Specify a location ” and type “ A:WIN98” in the drop-do wn bo x. Then, click the Next button. 18 Linksys Instant EtherFast ® Series 17 Windows 98 Installation and Setup Overview After ph y ...

  • Linksys 10/100 - page 13

    EtherFast ® 10/100 LAN Cards 20 8. W indo ws will f inish installing the softw are onto your PC. Click the Finish button. 9. When asked if y ou w ant to restart your PC, remo v e the Driv er Disk and click the Y es button. If you are using the W indows CD-R OM, leav e it in your PC. Y ou ma y need it later . 10. If W indo ws does not ask you to re ...

  • Linksys 10/100 - page 14

    EtherFast ® 10/100 LAN Cards 22 3. Click the File and Print Sharing button. The File and Print Sharing win- do w will appear . 4a. If y ou'd like others to be ab le to access the f iles on y our PC's hard dri ve, select I w ant to be ab le to giv e others access to m y f iles . 4b . If you'd like to share y our printer with other us ...

  • Linksys 10/100 - page 15

    EtherFast ® 10/100 LAN Cards 24 10. Choose the Access Contr ol tab . V erify that Shar ed-lev el access control is selected. 11. Click the OK button. Y our system ma y ask y ou for y our W indo ws 98 CD- R OM or the location of the W indows 98 installation f iles. If it does, direct W indo ws to the appropriate location, (i.e., D:win98 if you ha ...

  • Linksys 10/100 - page 16

    Windows Millennium Installation and Setup After ph ysicall y installing the EtherF ast ® 10/100 LAN Card in your computer , follo w these instructions to install the netw ork de vice driv er . The installation procedure for the netw ork dri ver will v ary depending on which v ersion of W indo ws 98 you are using, and on your current system conf ig ...

  • Linksys 10/100 - page 17

    8. If W indo ws asks you to supply an y drivers be ginning with “lne” or “netlne”, re-direct W indo ws to your flopp y driv e ( A:WINME ). 9. W indo ws will f inish installing the softw are onto your PC. Click the Finish button. 10. When asked if y ou w ant to restart your PC, remo v e the flopp y disk from your PC and click the Ye s butto ...

  • Linksys 10/100 - page 18

    3. Click the File and Print Sharing button. The File and Print Sharing win- do w will appear . 4a. If y ou'd like others to be ab le to access the f iles on y our PC's hard dri ve, select I w ant to be ab le to giv e others access to m y f iles . 4b . If you'd like to share y our printer with other users on the netw ork, select I wan ...

  • Linksys 10/100 - page 19

    9. Enter a description of your computer in the Computer Description box. This box is optional, and can be left b lank. 10. Choose the Access Contr ol tab. Ensure that Shar ed-lev el access contr ol is selected. 11. Click the OK button. Y our system ma y ask y ou for y our W indo ws Millennium CD-R OM or the location of the W indows Millennium insta ...

  • Linksys 10/100 - page 20

    34 EtherFast ® 10/100 LAN Cards 33 Windows NT 4.0 Installation and Setup The follo wing instructions will set up the EtherF ast ® 10/100 LAN Card in a computer running NT 4.0 ser v- er/w orkstation. Y ou should ha v e your original W indo ws NT CD-ROM a vailable during the installa- tion, as you might be ask ed to suppl y it. Alw a ys con- sult y ...

  • Linksys 10/100 - page 21

    4. At the Select Networ k Adapter screen, click the Ha ve Disk button and insert the EtherF ast ® 10/100 LAN Card Driver Disk into drive A. 5. At the Insert Disk screen, type A: into the f ield on your screen and click the OK button. 36 Linksys Instant EtherFast ® Series 1. After clicking on the Ye s button, the Netw or k Setup W izar d windo w ...

  • Linksys 10/100 - page 22

    38 Linksys Instant EtherFast ® Series 37 EtherFast ® 10/100 LAN Cards 7. Make sure there is a check mark beside TCP/IP Pr otocol X(v5) F ast Ethernet Adapter . Uncheck any others that ma y be checked and then click the Ne xt button to continue. 9. Click the Ne xt button to proceed through the subsequent screens. If you are asked to suppl y y our ...

  • Linksys 10/100 - page 23

    40 Linksys Instant EtherFast ® Series 39 EtherFast ® 10/100 LAN Cards 12. When you reach the follo wing screen, choose either W orkgr oup or Domain , depending on the type of netw ork y ou're setting up. (Y our Microsoft documentation explains the dif ference betw een W orkgroups and Domains.) Click the Next button to continue. 13. On the ne ...

  • Linksys 10/100 - page 24

    42 Linksys Instant EtherFast ® Series 41 EtherFast ® 10/100 LAN Cards 3. When the list of a vailab le netw ork adapters appears, click the Ha ve Disk but- ton. 4. Put the “ Linksys LNE100TX (v5) F ast Ethernet Adapter Drivers” diskette into driv e A. T ype A: into the box on y our screen and click the OK button. The follo wing steps are for ...

  • Linksys 10/100 - page 25

    44 Linksys Instant EtherFast ® Series 43 EtherFast ® 10/100 LAN Cards 10. Remo v e your Dri v er Disk and CD-R OM and click the Ye s button to restart your PC. 11. Once your PC has rebooted , doub le-click the Netw or k Neighborhood icon on your desktop. Mak e sure that you ha ve access to the netw ork. If y ou do, your card has been properl y in ...

  • Linksys 10/100 - page 26

    3. The Install Har dw ar e Device Driver s dialo g bo x will appear . When Ethernet Contr oller is display ed , select Search f or a suitable driv er f or m y device (Recommended) and click the Next button. 4. The Locate Driver F iles dialo g box will appear . Select Specify a location and click the Next button. 46 Linksys Instant EtherFast ® Seri ...

  • Linksys 10/100 - page 27

    7. The Completing the F ound New Har dwar e W izar d dialog box will appear . Click the Finish button to complete the installation. 8. Remo v e the flopp y disk from the flopp y dri ve. The Windo ws 2000 driv er installation is complete. If y ou w ant to shar e f iles or printers, refer to y our Windo ws 2000 documentation. 48 Linksys Instant Ether ...

  • Linksys 10/100 - page 28

    50 Linksys Instant EtherFast ® Series 49 EtherFast ® 10/100 LAN Cards 5. On the Access Control T ab , User Level Access is selected, but Shared Level Access is grayed out and not accessible . • Y ou previousl y had y our primary netw ork logon set to Client f or NetW ar e Networ ks . On the Configuration tab of the Networ k Pr operties windo w ...

  • Linksys 10/100 - page 29

    52 Linksys Instant EtherFast ® Series 51 EtherFast ® 10/100 LAN Cards 11. The workgroup , protocols, cabling and driver are all working properly , but the PC uses an AMD processor and it can only see itself in network neighborhood. • In some instances with PCs using AMD processors, the IRQ assigned to the card b y the BIOS (as it gets listed on ...

  • Linksys 10/100 - page 30

    54 EtherFast ® 10/100 LAN Cards Appendix Sharing Y our Files and Printers Overview By sharing your f iles and printers, other PCs on y our netw ork will be able to access the resources on your PC. Before sharing your f iles and printers, you should prepare y our computer to be used with any f ile ser vers that ma y be on the network. If y ou are n ...

  • Linksys 10/100 - page 31

    56 Linksys Instant EtherFast ® Series 55 EtherFast ® 10/100 LAN Cards Installing the Driver in Windows 95 V ersion A 1. W indo ws 95 will detect the EtherF ast card and displa y a Ne w Har dw ar e F ound windo w . 2. Slide the EtherF ast Card Driv er Disk into dri ve A. 3. Select Driver fr om disk pr ovided by har dwar e manufactur er , then clic ...

  • Linksys 10/100 - page 32

    58 Linksys Instant EtherFast ® Series 57 EtherFast ® 10/100 LAN Cards If you are installing the EtherF ast ® 10/100 Card in a W indows 95, 98 or Millennium PC that you plan on lo gging into a NT domain server , follow the directions belo w . 1. Start up W indows. Click on Start , Settings , then Contr ol P anel . Doub le- click on Netw ork . The ...

  • Linksys 10/100 - page 33

    60 Linksys Instant EtherFast ® Series 59 EtherFast ® 10/100 LAN Cards 3. If the Conf iguration box has a component called Dial-Up Adapter , skip for- ward to step 5. If it doesn’ t, continue with step 4. 4. Remo v e an y instance of the name Linksys in the box. This includes IPX/SPX…Linksys , NetBEUI…Linksys , and TCP/IP…Linksys . Also re ...

  • Linksys 10/100 - page 34

    11. Remo v e all devices with the name Linksys in its description. (If at an y point you are ask ed to restart the computer, Click No ). 12. Scroll do wn to the Other De vices listing. Click the plus [+] sign. Remo v e PCI Ethernet Contr oller or PCI Ethernet Adapter . (If Other De vices is not listed , proceed to the next step.) 13. Click the Clos ...

  • Linksys 10/100 - page 35

    64 Linksys Instant EtherFast ® Series 63 EtherFast ® 10/100 LAN Cards 9. The Netw ork Adapters category should be remov ed from the De vice Manager listing. 10. Click the OK button, and restart your computer . There ma y be times w hen you will need to manuall y install missing W indows netw orking components. 1. Click on Start , Settings , then ...

  • Linksys 10/100 - page 36

    66 EtherFast ® 10/100 LAN Cards 2. Select Netw ork PC Car d from the list and click the Add button. 3. Highlight Protocol and click the Add button. 4. Select Micr osoft from the list of “Manufacturers” and TCP/IP from the list of “Netw ork Protocols” and click the OK button. Note: Before adding any netw ork proto- cols, verify that the pro ...

  • Linksys 10/100 - page 37

    EtherFast ® 10/100 LAN Cards Here are some general guidelines to follo w w hen installing a PCI card (such as the EtherF ast card) into your computer: 1. The EtherF ast LAN adapter should be used in a 32-bit PCI slot that supports PCI Bus Mastering. It cannot be plugged into a PCI Bus Sla ve slot. Consult y our motherboard's documentation for ...

  • Linksys 10/100 - page 38

    EtherFast ® 10/100 LAN Cards 70 CPU (Central Processing Unit) - The computing par t of the computer . Also called the "processor ," it is made up of the control unit and ALU . CSMA/CD (Car rier Sense Multiple Access/Collision Detection) - The LAN access method used in Ethernet. When a de vice w ants to gain access to the net- w ork, it c ...

  • Linksys 10/100 - page 39

    EtherFast ® 10/100 LAN Cards Mbps (MegaBits P er Second) - One million bits per second; unit of measure- ment for data transmission. Motherboard - A motherboard is the physical arrangement in a computer that contains the computer's basic circuitry and components. Netw ork - A system that transmits any combination of v oice, video and/or data ...

  • Linksys 10/100 - page 40

    EtherFast ® 10/100 LAN Cards Softw are - Instructions for the computer . A series of instr uctions that perfor ms a particular task is called a "program." The tw o major categories of softw are are "system software" and "application softw are." System software is made up of control pro grams such as the operating syst ...

  • Linksys 10/100 - page 41

    EtherFast ® 10/100 LAN Cards 76 Contact Information F or help with the installation or operation of this product, contact Linksys Customer Support at one of the phone numbers or Inter net addresses below . Sales Information 800-546-5797 (LINKSYS) T ech Suppor t 888-793-4632 RMA Issues 949-261-1288 Fa x 949-261-8868 Email support@linksys.com We b h ...

  • Linksys 10/100 - page 42

    © Cop yright 2001 Linksys, All Rights Reser ved. Printed in the USA. http://www .linksys.com ...

Manufacturer Linksys Category Network Card

Documents that we receive from a manufacturer of a Linksys 10/100 can be divided into several groups. They are, among others:
- Linksys technical drawings
- 10/100 manuals
- Linksys product data sheets
- information booklets
- or energy labels Linksys 10/100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Linksys 10/100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Linksys 10/100, service manual, brief instructions and user manuals Linksys 10/100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Linksys 10/100.

Similar manuals

A complete manual for the device Linksys 10/100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Linksys 10/100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Linksys 10/100.

A complete Linksys manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Linksys 10/100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Linksys 10/100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Linksys 10/100, that we can find in the current document
3. Tips how to use the basic functions of the device Linksys 10/100 - which should help us in our first steps of using Linksys 10/100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Linksys 10/100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Linksys 10/100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Linksys 10/100?

Use the form below

If you did not solve your problem by using a manual Linksys 10/100, ask a question using the form below. If a user had a similar problem with Linksys 10/100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)