Manual RIDGID R5010

18 pages 1.68 mb
Download

Go to site of 18

Summary
  • RIDGID R5010 - page 1

    Your new drill has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank yo ...

  • RIDGID R5010 - page 2

    2 T ABLE OF CONTENTS      Introduction ............................................................................................................................................................... 2      General Safety Rules ............................................................................................. ...

  • RIDGID R5010 - page 3

    3 WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SA VE THESE INSTRUCTIONS W ork Area  Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.  Do not operate power tools in explosive atmo- sphe ...

  • RIDGID R5010 - page 4

    4 SPECIFIC SAFETY RULES  Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Additional Safety Rules      Know your power tool. Read operator ? ...

  • RIDGID R5010 - page 5

    5 Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alterna ...

  • RIDGID R5010 - page 6

    6 SPECIFICA TIONS Chuck Capacity ................................................................................................................. ........................ 1/2 in. (13 mm) Input ................................................................................................................... 120 Volts, 60 Hz, AC only, 9.0 amperes S ...

  • RIDGID R5010 - page 7

    7 UNP ACKING Instructions Your drill has been shipped completely assembled.  Carefully remove the tool from the box.  Make sure that all items listed in the packing list are included.  Inspect the tool carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing material until you have carefully ins ...

  • RIDGID R5010 - page 8

    8 Before using this product, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless. WARNING: Exercise caution when using this tool. Careless actions, for even a fraction of a second, can result in serious personal injury. Your new tool is equipped with the following ...

  • RIDGID R5010 - page 9

    9 OPERA TION WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose par- ticles being thrown into your eyes, resulting in possible serious injury. SWITCH See Figure 2. To turn your drill ON , depress the switch trigger. Release switch trigger to tur ...

  • RIDGID R5010 - page 10

    10 OPERA TION Fig. 5 TO INCREASE SPEED, PULL SWITCH TRIGGER VARIABLE SPEED See Figures 5 & 8. Your drill has a variable speed dial designed to allow operator control of speed and torque limits. The speed and torque of your drill can be increased by turning the dial on top of the drill. Avoid running your drill at low speeds for extended periods ...

  • RIDGID R5010 - page 11

    11 OPERA TION ADJUSTING THE AUXILIARY HANDLE ASSEMBLY See Figure 7. Follow these steps to adjust the auxiliary handle assembly.  Loosen the auxiliary handle assembly by turning the knob counterclockwise.  Rotate the auxiliary handle assembly to the desired location.  Tighten the auxiliary handle assembly securely by turning the knob clockw ...

  • RIDGID R5010 - page 12

    12 OPERA TION TO INSTALL BITS See Figures 10 and 11.      Unplug your drill. WARNING: Failure to unplug your drill could result in acciden- tal starting causing serious injury.      Open or close the chuck jaws to a point where the opening is slightly larger than the drill bit you intend to use. Also, raise the front o ...

  • RIDGID R5010 - page 13

    13 OPERA TION DRILLING See Figure 12.      Depress and release switch trigger to be sure your drill is in OFF position before connecting it to power supply.      Check the direction of rotation lever for correct setting (forward or reverse). See Figure 4.      Secure the material to be drilled in a vise ...

  • RIDGID R5010 - page 14

    14 CHUCK REMOVAL See Figure 13. The chuck must be removed in order to use some accessories. To remove:      Unplug your drill. WARNING: Failure to unplug your drill could result in acciden- tal starting causing serious injury.      Using two open-end wrenches, loosen the chuck. See Figure 13.      This w ...

  • RIDGID R5010 - page 15

    15 MAINTENANCE GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc. WARNING : Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come ...

  • RIDGID R5010 - page 16

    W ARRANTY 16 This product is manufactured under license from Ridgid, Inc. by One World Technologies, Inc. All warranty communications should be directed to One World Technologies, Inc. at (toll-free) 1-866-539-1710. 90-DAY SATISFACTION GUARANTEE POLICY During the first 90 days after the date of purchase, if you are dissatisfied with the performance ...

  • RIDGID R5010 - page 17

    NOTES 17 ...

  • RIDGID R5010 - page 18

    Customer Service Information For parts or service, contact your nearest Ridgid authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgidwoodworking.com. The model number of this tool is foun ...

Manufacturer RIDGID Category Drill

Documents that we receive from a manufacturer of a RIDGID R5010 can be divided into several groups. They are, among others:
- RIDGID technical drawings
- R5010 manuals
- RIDGID product data sheets
- information booklets
- or energy labels RIDGID R5010
All of them are important, but the most important information from the point of view of use of the device are in the user manual RIDGID R5010.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals RIDGID R5010, service manual, brief instructions and user manuals RIDGID R5010. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product RIDGID R5010.

Similar manuals

A complete manual for the device RIDGID R5010, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use RIDGID R5010 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of RIDGID R5010.

A complete RIDGID manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual RIDGID R5010 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the RIDGID R5010, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the RIDGID R5010, that we can find in the current document
3. Tips how to use the basic functions of the device RIDGID R5010 - which should help us in our first steps of using RIDGID R5010
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with RIDGID R5010
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of RIDGID R5010 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning RIDGID R5010?

Use the form below

If you did not solve your problem by using a manual RIDGID R5010, ask a question using the form below. If a user had a similar problem with RIDGID R5010 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)