English dropdown-ico

Manual IBM 92P1836

16 pages 0.24 mb
Download

Go to site of 16

Summary
  • IBM 92P1836 - page 1

    Part Number: 92P1836 Important This publication contains product-specific parts information for IBM ThinkPad Dock, ThinkPad Dock II, ThinkPad Port Replicator , ThinkPad Mini Dock, and ThinkPad Port Replicator II products. This publication is intended for trained service personnel who are familiar with ThinkPad products. Before servicing an IBM Thin ...

  • IBM 92P1836 - page 2

    T ighten screws as follows: v Plastic to plastic T urn an additional 90 degrees after the screw head touches the surface of the plastic part: 90 degrees more (Cross-section) v Logic card to plastic T urn an additional 180 degrees after the screw head touches the surface of the logic card: 180 degrees more (Cross-section) v T orque driver If you hav ...

  • IBM 92P1836 - page 3

    Removing and replacing a FRU This section presents directions and drawings for use in removing and replacing a FRU. Be sure to observe the following general rules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “ FRU replace ...

  • IBM 92P1836 - page 4

    1010 ThinkPad Dock PCI cover Before replacing the PCI cover: There are two types of ThinkPad Dock, as follows: v ThinkPad Dock: FRU no. 08N1546 (PCI cover: FRU no. 05K6246) v ThinkPad Dock with extension plate: FRU no. 08N1537 (PCI cover: FRU no. 08N7317) Confirm the FRU no. of the ThinkPad Dock first and choose the proper PCI cover FRU for the Thi ...

  • IBM 92P1836 - page 5

    Note: The following illustration shows how to remove the PCI cover of ThinkPad Dock (FRU no. 08N1546). Do the same to remove the PCI cover of ThinkPad Dock with extension plate (FRU no. 08N1537). 1 2 1 (Bottom view) 5 ...

  • IBM 92P1836 - page 6

    1020 ThinkPad Dock top cover Note This section is only for the ThinkPad Dock (FRU no. 08N1546). The top cover and screw kit for ThinkPad Dock (FRU no. 12P4143) is not available for the ThinkPad Dock with extension plate (FRU no. 08N1537) . 1 (Rear view) Step Screw (quantity) T orque 1 M2.5 × 4.8 mm (2) 0.392 Nm (4 kgfcm) (continued) 6 ...

  • IBM 92P1836 - page 7

    2 2 2 (Bottom view) Step Screw (quantity) T orque 2 M2.5 × 4.8 mm (8) 0.392 Nm (4 kgfcm) (continued) 7 ...

  • IBM 92P1836 - page 8

    Make sure that the system lock key A is set to the Unlock position. Release the front latches in step 3 , and then remove the top cover 4 . For step 5 , see the inside view , shown in the circle. 5 4 3 A When replacing the top cover , do the following: v Make sure that the springs are placed correctly . (continued) 8 ...

  • IBM 92P1836 - page 9

    v Make sure that the device release lever is seated correctly . v Make sure that the release button works correctly . 9 ...

  • IBM 92P1836 - page 10

    2010 ThinkPad Dock II PCI cover 1 2 1 (Bottom view) 10 ...

  • IBM 92P1836 - page 11

    2020 ThinkPad Dock II top cover 1 1 1 (Rear view) Step Screw (quantity) T orque 1 M2.5 × 4.8 mm (3) 0.392 Nm (4 kgfcm) 2 2 2 2 Step Screw (quantity) T orque 2 M2.5 × 4.8 mm (4) 0.392 Nm (4 kgfcm) (continued) 11 ...

  • IBM 92P1836 - page 12

    3 3 (Bottom view) Step Screw (quantity) T orque 3 M2.5 × 4.8 mm (6) 0.392 Nm (4 kgfcm) (continued) 12 ...

  • IBM 92P1836 - page 13

    Make sure that the system lock key A is set to the Unlock position. Release the front latches in step 4 , and then remove the top cover 5 . Then detach the connector cable 6 as in the figure. 4 5 A 6 13 ...

  • IBM 92P1836 - page 14

    Parts list FRU P/N CRU ID ThinkPad Dock 08N1546 N ThinkPad Dock with extension plate 08N1537 N ThinkPad Dock II 67P9010 * ThinkPad Mini Dock 67P901 1 * ThinkPad Port Replicator 08N1536 N ThinkPad Port Replicator II 74P6735 * Optional FRUs FRU P/N CRU ID PCI cover for ThinkPad Dock 05K6246 N T op cover and screw kit for ThinkPad Dock 12P4143 N PCI c ...

  • IBM 92P1836 - page 15

    Power cords (ThinkPad Dock and ThinkPad Dock II) IBM power cords for a specific country or region are usually available only in that country or region: For 3-pin power cords: Region P/N CRU ID Argentina 36L8868 * Australia, New Zealand 75H8988 Brazil 49P2101 Canada, Thailand, U.S. 75H8989 Denmark 75H8992 European countries 75H8990 India, South Afri ...

  • IBM 92P1836 - page 16

    Power cords (ThinkPad Mini Dock) IBM power cords for a specific country or region are usually available only in that country or region: For 2-pin power cords: Region P/N CRU ID Canada, U.S. 13H5264 * Japan 13H5273 Argentina 36L8870 Brazil 49P2095 For 3-pin power cords: Region P/N CRU ID Australia, New Zealand 76H3514 * T aiwan, Thailand 76H3516 Ita ...

Manufacturer IBM Category Laptop Docking Station

Documents that we receive from a manufacturer of a IBM 92P1836 can be divided into several groups. They are, among others:
- IBM technical drawings
- 92P1836 manuals
- IBM product data sheets
- information booklets
- or energy labels IBM 92P1836
All of them are important, but the most important information from the point of view of use of the device are in the user manual IBM 92P1836.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals IBM 92P1836, service manual, brief instructions and user manuals IBM 92P1836. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product IBM 92P1836.

Similar manuals

A complete manual for the device IBM 92P1836, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use IBM 92P1836 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of IBM 92P1836.

A complete IBM manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual IBM 92P1836 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the IBM 92P1836, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the IBM 92P1836, that we can find in the current document
3. Tips how to use the basic functions of the device IBM 92P1836 - which should help us in our first steps of using IBM 92P1836
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with IBM 92P1836
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of IBM 92P1836 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning IBM 92P1836?

Use the form below

If you did not solve your problem by using a manual IBM 92P1836, ask a question using the form below. If a user had a similar problem with IBM 92P1836 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)