English dropdown-ico

Manual Panasonic PT-CW230E

79 pages Not applicable
Download

Go to site of 79

Summary
  • Panasonic PT-CW230E - page 1

    Operating Instructions Projector Operations DLP ™ Based Projector Commercial Use Thank you for purchasing this Panasonic Product. Before operating this product, please read the instructions carefully and save this manual J for future use. For information on using the product via a network, refer to “Operating Instructions – Network Operations ...

  • Panasonic PT-CW230E - page 2

    2 - ENGLISH Important Information Read this rst! W ARNING: THIS APP ARA TUS MUST BE EAR THED. W ARNING: T o prevent damage which may result in re or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV , January 18, 1991: The sound pressure level at the operator position is equal or less ...

  • Panasonic PT-CW230E - page 3

    Read this rst! ENGLISH - 3 Important Information W ARNING: PO WER  The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur . If the following problems occur , cut off the power supply immediately . Continued use of the projector in these conditions will result in re or ...

  • Panasonic PT-CW230E - page 4

    Read this rst! 4 - ENGLISH Important Information W ARNING: Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician. If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks. Do not use anything other than an authorized ceiling mount bracket. ...

  • Panasonic PT-CW230E - page 5

    Read this rst! ENGLISH - 5 Important Information W ARNING: ACCESSORI ES  Do not use or handle the batteries improperly , and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re. Use AAA/R03 or AAA/LR03 batteries. z Do not use unspecied batteries. z Do not disassemble dry cel ...

  • Panasonic PT-CW230E - page 6

    Read this rst! 6 - ENGLISH Important Information T o remove the battery Remote Control Battery 1 . P ress th e g u ide a nd l ift th e cover . 2. Remo ve the batteri es. CAUTION: ON USE /INST A LLA TION  Do not put your weight on this projector . Y ou could fall or the projector could break, and injury will result. Be especially careful not t ...

  • Panasonic PT-CW230E - page 7

    ENGLISH - 7 This function enables Input search and Auto PC ad justment by press ing the <AUT O SETUP> button. With the Direct Power Of f function, you can disconnect the power cord from the wall outlet or turn of f the breaker even during projection. Short focus lens allows you to project large images from short distance. This function allows ...

  • Panasonic PT-CW230E - page 8

    8 - ENGLISH Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Contents Be sure to read “Read this rst!”. ( pages 2 to 6) Important Information Read this rst! ........................................... 2 Contents ..................................................... 8 Precautions for Use...... ...

  • Panasonic PT-CW230E - page 9

    ENGLISH - 9 Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Color ............................................................................. 44 T int .............................................................................. 44 Color temp. ....................................................... ...

  • Panasonic PT-CW230E - page 10

    10 - ENGLISH Important Information Precautions for Use Cautions when transporting When transporting the projector , hold it securely by its bottom and avoid excessive vibration and impacts. z Doing so may damage the internal parts and result in malfunctions. Do not transport the projector with the adjustable feet extended. Doing so may damage the a ...

  • Panasonic PT-CW230E - page 11

    Precautions for Use ENGLISH - 11 Important Information Cautio ns when se tting the pro jector s J Do not stack the projectors. z Do not block the ventilation ports (intake and exhaust) of the projector . z Avoid heating and cooling air from the air conditioning system directly blow to the ventilation ports (intake and z exhaust) of the projector . ...

  • Panasonic PT-CW230E - page 12

    Precautions for Use 12 - ENGLISH Important Information Cautions on use I n ord er to get th e pi ctu re qu al ity J Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light z from indoor lamps from shining onto the screen. Depending on where the projector is used, heated air from an exhaust port ...

  • Panasonic PT-CW230E - page 13

    Precautions for Use ENGLISH - 13 Important Information If you view 3D images in bright ambient light environment, you may not able to see them clearly . Or if you use z the 3D glasses in a room which uorescent lighting (50Hz), ickering may occur . If these happen, change the room lighting condition by making the room dark or turning off the l ...

  • Panasonic PT-CW230E - page 14

    Precautions for Use 14 - ENGLISH Important Information Accessories Make sure the following accessories are provided with your projector . Numbers in the brackets ( ) show the number of accessories. Remote control unit (x1) (6451054586) Power cord (x1) (6103597768) CD-ROM (x1) (6103595078) Batteries (AAA/R03 or AAA/LR03 type) (x2) (for remote contro ...

  • Panasonic PT-CW230E - page 15

    ENGLISH - 15 Preparation About Y our Projector Remote control (1) <AUTO SETUP> Button Execute the setting of Auto setup in the setting menu. ( Æ page 51) (2) Input Selection Buttons: <COMPUTER 1>, <COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>, <COMPONENT>. These buttons are used to select the input signal. ( Æ ...

  • Panasonic PT-CW230E - page 16

    About Y our Projector 16 - ENGLISH Preparation (1) Control Panel and Indicators ( Æ page 17) (2) Remote control signal receptor (3) Lamp cover (Lamp and Air Filter) ( Æ page 63) The lamp unit and lter unit are located inside. (4) Adjustable feet Adjust the projection angle. (5) Speaker (6) Air exhaust port Hot air is exhausted from the air exh ...

  • Panasonic PT-CW230E - page 17

    About Y our Projector ENGLISH - 17 Preparation (1) S-VIDEO IN Connect to S-VIDEO output signals. (2) VIDEO IN Connect to VIDEO output signals. (3) AUDIO IN Connect to the audio output signals. AUDIO IN has right and left (L and R) terminals. (4) COMPUTER 1/COMPONENT AUDIO IN Connect the audio input signals. (5) COMPUTER 2 AUDIO IN Connect to the au ...

  • Panasonic PT-CW230E - page 18

    18 - ENGLISH Preparation Using Remote control Installing and Removing batteries Open the cover 1 ) Install batteries and close the cover 2 ) (Insert the – side rst.) Remove the batteries in the reverse order of installation. z Setting Remote control ID numbers When you use the system with multiple projectors, you can operate each projector ind ...

  • Panasonic PT-CW230E - page 19

    ENGLISH - 19 Getting Started Setting up Projection method Y ou can use the projector with any of the following 6 projection methods. T o set the desired method in the projector . J Mounting on the ceiling and projecting forward Mounting on the ceiling J and projecting from rear (Using translucent screen) V ertical projecting J upwards (Using transl ...

  • Panasonic PT-CW230E - page 20

    Setting up 20 - ENGLISH Getting Started Screen size and throw distance Place the projector referring to the diagram on the right and the gures of throwing distance. Y ou can adjust the display size. L Projection distance (cm) SH Height of the projection area (m) SW Width of the projection area (m) SD Diagonal length of t he projection area (m) A ...

  • Panasonic PT-CW230E - page 21

    Setting up ENGLISH - 21 Getting Started J Projection distance for PT -CX200E (All measurements below are approximate and may differ slightly from the actual measurements.) Projection size For 4:3 aspect ratio For 16:9 aspect ratio Screen diagonal (SD) L A L A 1.27 m(50") - - 24.8 cm(0.81') 35.5 cm(1.17') 1.40 m(55") 25.1 cm(0.82 ...

  • Panasonic PT-CW230E - page 22

    Setting up 22 - ENGLISH Getting Started Adjusting front adjustable feet Lift the front of the projector and rotate the adjustable feet to a proper height and tilt. Y ou can turn the front adjustable feet to extend them. Y ou can turn them in the opposite direction to contract them. (Y ou can adjust the projection angle vertically .) Attention Heate ...

  • Panasonic PT-CW230E - page 23

    ENGLISH - 23 Getting Started Connections Before connecting to the projector Read carefully the instruction manual for the device to be connected. z T urn off the power switch of the devices before connecting cables. z If any connection cable is not supplied with the device, or if no optional cable is available for connection of the z device, prepar ...

  • Panasonic PT-CW230E - page 24

    24 - ENGLISH Basic Operation Powering ON/OFF Connecting the power cord Be sure to insert the attached power cord securely to its base to prevent it from coming off. Power cord holder J A power cord holder is designed to prevent the AC power cord from coming off the projector . Please insert the power cord into the power cord holder correctly as Pic ...

  • Panasonic PT-CW230E - page 25

    Powering ON/OFF ENGLISH - 25 Basic Operation ON(G)/ST ANDBY(R) indicator The <ON(G)/ST ANDBY(R)> indicator informs you the status of the power . Conrm the status of the <ON(G)/ ST ANDBY(R)> indicator before operating the projector . ON(G)/ST ANDBY(R) indicator Indicator status Status No illumination or ashing The power cord is unp ...

  • Panasonic PT-CW230E - page 26

    Powering ON/OFF 26 - ENGLISH Basic Operation Complete peripheral connections (with a 1 ) computer , VCR, etc.) before turning on the projector . Connect the projector ’s AC power cord into an 2 ) AC outlet. The <ON(G)/ST ANDBY(R)> indicator lights red. Press the 3 ) < > button on the control panel or the remote control. The <ON(G)/ ...

  • Panasonic PT-CW230E - page 27

    Powering ON/OFF ENGLISH - 27 Basic Operation Enter a PIN code PIN Code Input Dialog Box Press ▲▼ to enter a number . Press ► to x the number and move the red frame pointer to the next box. The number changes to  . If you xed an incorrect number , use the ◄ button to move the pointer to the number you want to correct, and then enter ...

  • Panasonic PT-CW230E - page 28

    Powering ON/OFF 28 - ENGLISH Basic Operation Press the < 1 ) > button on the control panel or the remote control, and Power off? appears on the screen. Press the < 2 ) > button on the control panel or the remote control again to turn off the projector . The <ON(G)/ST ANDBY(R)> indicator starts to blink red, and the cooling fans ke ...

  • Panasonic PT-CW230E - page 29

    ENGLISH - 29 Basic Operation Projecting Check the connections of the peripheral devices and connection of the power cord ( Æ page 24) and switch on the power ( Æ page 26) to start the projector . Select the image and adjust the state of the image. Selecting the image Select an input signal. The image selected with the <COMPUTER 1>, <COMP ...

  • Panasonic PT-CW230E - page 30

    Projecting 30 - ENGLISH Basic Operation For V iewing 3D Contents T o view 3D images, you need to prepare at least the 3D active shutter glasses, 3D content and 3D reproducing equipment. For example, as for computer , when transmitting 3D signals from a computer to the projector , you also need to install the graphic card which has the capability to ...

  • Panasonic PT-CW230E - page 31

    ENGLISH - 31 Basic Operation Basic operations by using the remote control Using the AUT O SETUP function This function allows you to automatically adjust Input search, and Auto PC adjustment during signal input from a computer . button Press the <AUTO SETUP> button on the remote control. Note For details, see “Setting” of Main menu. ( z ? ...

  • Panasonic PT-CW230E - page 32

    Basic operations by using the remote control 32 - ENGLISH Basic Operation Using the KEYST ONE button This function allows you to correct keystone distortion. button Press the <KEYSTONE> button on the control panel or the remote control. The Keystone dialog box appears. Press ▲▼ to correct keystone distortion. The keystone adjustment can b ...

  • Panasonic PT-CW230E - page 33

    Basic operations by using the remote control ENGLISH - 33 Basic Operation Using the A V MUTE function button Press the < A V MUTE> button on the remote control to black out the image. T o restore to normal, press the < A V MUTE> button again or press any button. The screen changes each time you press the z < A V MUTE> button as fo ...

  • Panasonic PT-CW230E - page 34

    Basic operations by using the remote control 34 - ENGLISH Basic Operation Using the 3D button This function allows you to operate the 3D function. button Press <3D> button on the remote control. Note For details, see “3D” of "Setting" under Main menu. z ( Æ page 52) Using the MUTE button Press this button on the remote control ...

  • Panasonic PT-CW230E - page 35

    ENGLISH - 35 Settings Menu Navigation Navigating through the menu Operating procedure J Press the <MENU> button. 1 ) The Main Menu screen appears. Press ▲▼ to select the Main Menu 2 ) item. Select the desired item from the 9 items: [Input], [PC adjust], [Image select], [Image adjust], [Screen], [Sound], [Setting], [Information] and [Netwo ...

  • Panasonic PT-CW230E - page 36

    Menu Navigation 36 - ENGLISH Settings Main menu The main menu consists of the following 9 menu items. When a main menu item is selected, the screen changes to a submenu selection screen. Input PC adjust Image select Image adjust Screen Sound Setting Information Network Sub menu The sub-menu screen of the selected main menu appears, and you can set ...

  • Panasonic PT-CW230E - page 37

    Menu Navigation ENGLISH - 37 Settings Image adjust [ ] Sub-menu item Factory default Page Contrast 32 44 Brightness 32 44 Color* 1 32 44 T int* 1 32 44 Color temp. Mid 44 Red 32 45 Green 32 45 Blue 32 45 Sharpness 8 45 Gamma Default 45 Noise reduction* 1 L1 45 Progressive* 1 L1 46 Reset - 46 Store - 46 When input video signal to the projector , the ...

  • Panasonic PT-CW230E - page 38

    38 - ENGLISH Settings Input menu Select [Input] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote Control Control Panel Computer 1: RGB/Component /RGB (Scart) Press ▲▼ to select [Computer 1]. 1 ) Press ► to access the submenu. 2 ) Press ▲▼ to select RGB, Component 3 ) or ...

  • Panasonic PT-CW230E - page 39

    Input menu ENGLISH - 39 Settings HDMI Press ▲▼to select [HDMI] and then press the <SELECT> button. V ideo Press ▲▼ to select [Video] and then press the <SELECT> button. S-video Press ▲▼ to select [S-video] and then press the <SELECT> button. J V ideo System Selection The projector automatically detects an incoming vide ...

  • Panasonic PT-CW230E - page 40

    40 - ENGLISH Settings AUT O PC adjust Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote Control Control Panel AUT O PC adj. [Auto PC adjustment] function is provided to automatically adjust [Fine sync], [T otal dots], [Horizontal] and [V ertical] positions to con ...

  • Panasonic PT-CW230E - page 41

    ENGLISH - 41 Settings Manual PC adjust Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote Control Control Panel Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector . Manual PC adjustment enables you to precise ...

  • Panasonic PT-CW230E - page 42

    Manual PC adjust 42 - ENGLISH Settings Current mode Press ▲▼ to select [Current mode]. 1 ) Press ► or the <SELECT> button 2 ) to enter the next submenu to show H-sync freq. and V -sync freq. of the connected computer . Clamp Press ▲▼ to select [Clamp]. 1 ) Press the <SELECT> button to display 2 ) the adjustment dialog box. Pre ...

  • Panasonic PT-CW230E - page 43

    ENGLISH - 43 Settings Image select Select [Image select] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote Control Control Panel Dynamic For viewing pictures in a bright room. Press ▲▼ to select [Dynamic] and then press the <SELECT> button. Standard Normal picture mode pr ...

  • Panasonic PT-CW230E - page 44

    44 - ENGLISH Settings Image adjust Select [Image adjust] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote Control Control Panel Contrast Press ▲▼ to select [Contrast]. 1 ) Press the <SELECT> button to display 2 ) the adjustment dialog box. Press ◄► to adjust the sett ...

  • Panasonic PT-CW230E - page 45

    Image adjust ENGLISH - 45 Settings Red Press ▲▼ to select [Red]. 1 ) Press the <SELECT> button to display 2 ) the adjustment dialog box. Press ◄► to adjust the setting value. 3 ) Operation Adjustment Adjustment range Press ►. deepen red tone Maximum value 63 Press ◄. lighten red tone Minimum value 0 Green Press ▲▼ to select [G ...

  • Panasonic PT-CW230E - page 46

    Image adjust 46 - ENGLISH Settings Progressive Press ▲▼ to select [Progressive]. 1 ) Press the <SELECT> button to display 2 ) the dialog box. Press ◄► to select the desired item. 3 ) An interlaced video signal can be displayed in z progressive mode. Select one of the following options. Off Disabled L1 For an active picture L2 For a st ...

  • Panasonic PT-CW230E - page 47

    ENGLISH - 47 Settings Screen Select [Screen] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote Control Control Panel Normal Provide the image to t the screen size while maintaining the aspect ratio of the input signal. Press ▲▼ to select [Normal] and then press the <SELEC ...

  • Panasonic PT-CW230E - page 48

    48 - ENGLISH Settings Screen The following items are the submenu of [Store]. Custom adj. Adjust the screen scale and position manually with this function. Press ▲▼ to select [Custom adj.]. 1 ) Press ► or the <SELECT> button to 2 ) enter the next submenu. Press ▲▼ to choose the item you 3 ) want to adjust. Y ou can choose one from th ...

  • Panasonic PT-CW230E - page 49

    ENGLISH - 49 Settings Screen Ceiling This function is used to project the image from a ceiling-mounted projector . Press ▲▼ to select [Ceiling] and then 1 ) press the <SELECT> button. Press ▲▼ to change the image. 2 ) When this function is set to [On], the picture will z be top/bottom and left/right reversed. Rear This function is use ...

  • Panasonic PT-CW230E - page 50

    50 - ENGLISH Settings Sound Select [Sound] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote Control Control Panel V olume Press ▲▼ to select [V olume] and then 1 ) press the <SELECT> button. Press ◄► to adjust the volume. 2 ) Operation Adjustment Adjustment range Pre ...

  • Panasonic PT-CW230E - page 51

    ENGLISH - 51 Settings Setting Select [Setting] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote Control Control Panel Language Press ▲▼ to select [Language]. 1 ) Press ► or the <SELECT> button. 2 ) Press ▲▼ to select the desired 3 ) language. The language used in t ...

  • Panasonic PT-CW230E - page 52

    Setting 52 - ENGLISH Settings 3D setting This function is used to set the 3D display function. Press ▲▼ to select these functions as follows: 3D J Select among [Off], [On] and [NVIDIA 3D VISION] mode. * When selecting [NVIDIA 3D VISION] mode, the other menus [3D sync], [3D->2D], [3D phase] setting are not necessary . (displayed in gray) 3D s ...

  • Panasonic PT-CW230E - page 53

    Setting ENGLISH - 53 Settings Logo This function allows you to customize the screen logo with [Logo select], [Logo PIN code lock] and [Logo PIN code change] functions. Press ▲▼ to select [Logo]. 1 ) Press ► or the <SELECT> button. 2 ) Press ▲▼ to choose the desired item. 3 ) Logo select J This function decides on the starting-up dis ...

  • Panasonic PT-CW230E - page 54

    Setting 54 - ENGLISH Settings Standby mode This function can set the electric power when the projector is standing by . Press ▲▼ to select [Standby mode] 1 ) and then press the <SELECT> button. Press ▲▼ to switch between the items 2 ) as below . Eco Restricts some functions in standby mode to reduce power consumption. Network Does not ...

  • Panasonic PT-CW230E - page 55

    Setting ENGLISH - 55 Settings Lamp power This function allows you to change brightness of the screen. Press ▲▼ to select [Lamp power] and 1 ) then press the <SELECT> button . Press ▲▼ to select one among the 2 ) modes as below . Y ou can also press the <LAMP> button to z display [Lamp power]. Normal Normal brightness. Eco Lower ...

  • Panasonic PT-CW230E - page 56

    56 - ENGLISH Settings PIN code change J The PIN code can be changed to your desired four- digit number . Press ▲▼ to select [PIN code change] 1 ) and then Press <SELECT> button. Current Pin code dialog box appears. z Press ▲▼ to enter the current code. 2 ) Press ► button to x the number and move the red frame pointer to the next ...

  • Panasonic PT-CW230E - page 57

    Setting ENGLISH - 57 Settings Filter counter This function is used to set a frequency for the lter replacement. Press ▲▼ to select [Filter counter]. 1 ) Press ►or the <SELECT> button to 2 ) access the submenu items. Filter counter J Show the total accumulated time of the lter use timer setting. T imer J T o set a timer . When the ...

  • Panasonic PT-CW230E - page 58

    58 - ENGLISH Settings Select [Information] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote Control Control Panel Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector . Y ou can ...

  • Panasonic PT-CW230E - page 59

    LAMP and W ARNING Indicators ENGLISH - 59 Maintenance LAMP and W ARNING Indicators Managing the indicated problems If a problem should occur inside the projector , the <ON(G)/ST ANDBY(R)> , <LAMP> and/or <WARNING> indicators will inform you. Manage the indicated problems as follow . CAUTION Before you take a remedial measure, foll ...

  • Panasonic PT-CW230E - page 60

    60 - ENGLISH Maintenance Replacement Before replacing the unit When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect z the power plug from the wall outlet. ( Æ pages 24, 28) Be sure to observe the procedure “T uring off the projector” ( z Æ page 28) when performing power supply operation. Mai ...

  • Panasonic PT-CW230E - page 61

    Replacement ENGLISH - 61 Maintenance R ese tt ing t he Filter Counter J Be sure to reset the Filter counter after replacing the air lter unit. ( Æ page 57" Filter counter reset ") Attention T urn off the power before you replace the air lter unit. z When attaching the air lter unit, make sure that the projector is stable, and wo ...

  • Panasonic PT-CW230E - page 62

    Replacement 62 - ENGLISH Maintenance J Lamp unit The lamp unit is a consumable component. Y ou can check the total usage time using Lamp runtime in the Information menu on page 58. It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer . Consult your dealer to purchase a replacement lamp unit (ET -LAC100). CAU ...

  • Panasonic PT-CW230E - page 63

    Replacement ENGLISH - 63 Maintenance J Replacing the Lamp unit CAUTION: When the projector is mounted on a ceiling, do not work with your face close to the projector . z Attach the lamp unit and the lamp cover securely . z When you experience difculty in installing the lamp, remove it and try again. If you use force to install the z lamp, the co ...

  • Panasonic PT-CW230E - page 64

    64 - ENGLISH Maintenance T roubleshooting Please check following points. For details, see the corresponding pages. Problem Cause Reference page Power does not turn on. The power cord may not be connected. z — No electric supply is at the wall outlet. z — The circuit breakers have tripped. z — I z s the <LAMP> indicator , <ON(G)/ST AN ...

  • Panasonic PT-CW230E - page 65

    T roubleshooting ENGLISH - 65 Maintenance Problem Cause Reference page Picture from a HDMI device does not appear or picture is not stable. Is the HDMI cable securely connected? z 23 T urn off the power of the projector and the connected devices. Then turn z the power of the projector and the connected devices back on. — Isn't unsupported si ...

  • Panasonic PT-CW230E - page 66

    66 - ENGLISH Appendix T echnical Information Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specication, so that the projector can be controlled by a personal computer which is connected to this connector . J Connection J Pin assignments and signal names D-Sub 9-pin (female ...

  • Panasonic PT-CW230E - page 67

    T echnical Information ENGLISH - 67 Appendix J Functional Execution Command Format The projector control command is dened as one command line that starts with "C" and ends with carriage return. Next Command PC � Projector Projector � PC Command Response More than 100ms “C ” “0” “7” CR ACK CR (A few ms ~ 5s) Command Func ...

  • Panasonic PT-CW230E - page 68

    T echnical Information 68 - ENGLISH Appendix J Status Read Command Format The projector control command is dened as one command line that starts with "CR" and ends with carriage return. PC � Projector Projector � PC Command Processing “C ” “R” “0” CR ACK CR (A few ms ~ 5s) Command Function Projector Return Projector sta ...

  • Panasonic PT-CW230E - page 69

    T echnical Information ENGLISH - 69 Appendix Other terminals Pin assignments and signal names of <S-VIDEO IN> terminal J Outside view Pin No. Signal names GND (luminance signal) GND (color signal) Luminance signal Color signal Pin assignments and signal names of <COMPUTER 1 IN/COMPONENT J IN> terminal Outside view Pin No. Signal names : ...

  • Panasonic PT-CW230E - page 70

    T echnical Information 70 - ENGLISH Appendix Pin assignments and signal names of <HDMI> terminal J Outside view Pin No. Signal names Pin No. Signal names T .M.D.S data 2+ T .M.D.S clock shield T .M.D.S data 2 shield T .M.D.S clock - T .M.D.S data 2 - CEC T .M.D.S data 1+ — T .M.D.S data 1 shield SCL T .M.D.S data 1 - SDA T .M.D.S data 0+ DD ...

  • Panasonic PT-CW230E - page 71

    T echnical Information ENGLISH - 71 Appendix List of compatible signals The following table species the types of signals compatible with the projectors. Format : V = VIDEO, S = S-VIDEO, C = COMPUTER, Y = YP B P R , H = HDMI Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP 3D Display Format H ...

  • Panasonic PT-CW230E - page 72

    T echnical Information 72 - ENGLISH Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP 3D Display Format H (kHz) V(Hz) P T- CW230E P T- CX200E XGA 1024 x 768 48.360 60.000 65.000 A AA ○ ○ C 68.677 84.977 94.504 A AA 60.023 75.030 78.750 A AA ○ 56.476 70.070 75.000 A AA ○ 60.31 74 ...

  • Panasonic PT-CW230E - page 73

    T echnical Information ENGLISH - 73 Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP 3D Display Format H (kHz) V (Hz) P T- CW230E P T- CX200E UXGA 1600 x 1200 75.00 60.00 162.00 A A ○ C 81.25 65.00 175.50 A A 87.5 70.00 189.00 A A 93.75 75.00 202.50 A A 106.250 85.000 229.500 A A WXG ...

  • Panasonic PT-CW230E - page 74

    T echnical Information 74 - ENGLISH Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP 3D Display Format H (kHz) V (Hz) P T- CW230E P T- CX200E D-VGA 640 x 480 31.469 59.940 25.175 A A ○ ○ H D-SVGA 800 x 600 37.879 60.320 40.000 A A ○ ○ 76.302 1 19.972 73.250 A A ○ D-XGA 1024 x ...

  • Panasonic PT-CW230E - page 75

    ENGLISH - 75 Appendix Specications Model No. PT -CW230E PT -CX200E Power supply AC100 V - 240 V 50 Hz/60 Hz Power consumption 100 V - 240 V 4.5 A-2.2 A, 350 W When [Standby mode] of [Setting] is set to [ECO]: 0.45W When [Standby mode] of [Setting] is set to [Network]: 1 1.0W DLP chip Size 0.65"(aspect ratio 16 : 10) 0.55"(aspect ratio ...

  • Panasonic PT-CW230E - page 76

    Specications 76 - ENGLISH Appendix Model No. PT -CW230E PT -CX200E T erminals COMPUTER 1 IN/ COMPONENT IN 1 (D-sub 15 pin female) [RGB signal] 0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 [p-p] 75 Ω HD/SYNC TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible [YP B P R ...

  • Panasonic PT-CW230E - page 77

    ENGLISH - 77 Appendix Dimensions <Unit : mm(inch)> 77.5 (3.05) 178.0 (7.01) 321.0 (12.64) 170.0 (6.69) 134.6 (5.30) 125.8 (4.95) 114.5 (4.51) 107.9 (4.25) 104.2 (4.10) 10.0 (0.39) 1 17.0 (4.61) 78.0 (3.07) 291.0 (1 1.46) 227.0 (8.94) 385.0 (15.16) 386.0 (15.20) Actual dimension may differ by product. :  Ceiling mount bracket safeguards Ins ...

  • Panasonic PT-CW230E - page 78

    78 - ENGLISH Appendix  Index Number 3D setting ....................................... 52 A About Y our Projector ....................... 15 Accessories .................................... 14 Adjusting front adjustable feet ........ 22 AUTO PC adjust ............................. 40 Auto setup ...................................... 51 A V MUTE ...

  • Panasonic PT-CW230E - page 79

    Panasonic Corporation © Panasonic Corporation 2012 Web Site : http://panasonic.net/avc/projector/ Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with gener ...

Manufacturer Panasonic Category Video projector

Documents that we receive from a manufacturer of a Panasonic PT-CW230E can be divided into several groups. They are, among others:
- Panasonic technical drawings
- PT-CW230E manuals
- Panasonic product data sheets
- information booklets
- or energy labels Panasonic PT-CW230E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Panasonic PT-CW230E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Panasonic PT-CW230E, service manual, brief instructions and user manuals Panasonic PT-CW230E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Panasonic PT-CW230E.

Similar manuals

A complete manual for the device Panasonic PT-CW230E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Panasonic PT-CW230E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Panasonic PT-CW230E.

A complete Panasonic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Panasonic PT-CW230E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Panasonic PT-CW230E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Panasonic PT-CW230E, that we can find in the current document
3. Tips how to use the basic functions of the device Panasonic PT-CW230E - which should help us in our first steps of using Panasonic PT-CW230E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Panasonic PT-CW230E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Panasonic PT-CW230E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Panasonic PT-CW230E?

Use the form below

If you did not solve your problem by using a manual Panasonic PT-CW230E, ask a question using the form below. If a user had a similar problem with Panasonic PT-CW230E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)