Manual Ingersoll-Rand DOSER 45532694

12 pages 1.01 mb
Download

Go to site of 12

Summary
  • Ingersoll-Rand DOSER 45532694 - page 1

    45532694 Edition 2 A u g ust 2007 Doser - Docking Station Maintenance Manual ...

  • Ingersoll-Rand DOSER 45532694 - page 2

    2 45532694_ed2 INDEX 1 DOCKING STATION – DS .................................................................................... 3 1.1 Dismounting the Docking Unit ............................................................................................................. 3 1.2 Change Pneumatic Clamps ............................................ ...

  • Ingersoll-Rand DOSER 45532694 - page 3

    45532694_ed2 3 1 Docking station – DS Use the drawings and the component list for the specified unit. In the de scription below, the figures below (xx) refer to the corresponding figures on the drawing. Always turn off the air and material supply & depressurize the entire system before installing, removing or adjusting any accessory on this p ...

  • Ingersoll-Rand DOSER 45532694 - page 4

    4 45532694_ed2 1.2 Change Pneumatic Clamps Drawings/ Component lists: • Aut. Tool Changer DS Docking unit T2X-16-502-IR DS-ATC complete T2X-16-500-IR/-505-IR • Aut. Tool Changer- (onboard lub.) DS Docking unit T2X-16-503-IR DS complete T2X-16-501-IR a) Follow step a) to e) in section 1.1. The docking station can be turned 180° and place b ack ...

  • Ingersoll-Rand DOSER 45532694 - page 5

    45532694_ed2 5 1.3 Change Male Docking Valve Complete • Drawings/Component lists: T2X-16-500-IR/-501-IR/-505-IR T2X-16-502-IR/-503-IR T2X-16-511-IR This operation requires, the following special tools and preparations: • Mounting paste a) Remove the cover plate (9) by remo ving the three screws (1 4). • Take off the docking unit (1) by removi ...

  • Ingersoll-Rand DOSER 45532694 - page 6

    6 45532694_ed2 1.4 Hydraulics of the Docking Station Drawing/Component list: • DS ATC T2X-16-500-IR/-505-IR • DS ATC (OnBoard Lubrication) T2X-16-501-IR • Docking Unit ATC T2X-16-502-IR • Docking Unit (Onboard lub.) T2X-16-503-IR For doser hydraulics and pneumatics, See “Doser” Maintenance Manual Form 45532660. NOTE! Only lubrication of ...

  • Ingersoll-Rand DOSER 45532694 - page 7

    45532694_ed2 7 1.5 Pneumatics of the Docking Station Drawing/Component list: • DS ATC T2X-16-500-IR/-505-IR • DS ATC (OnBoard Lubrication) T2X-16-501-IR • Docking Unit ATC T2X-16-502-IR • Docking Unit (Onboard lub.) T2X-16-503-IR Also see pneumatic sch eme T2X-07-xxx From To (1) Inlet pneumatics (2) Pneumatic valves, connection 1 (3) Pneuma ...

  • Ingersoll-Rand DOSER 45532694 - page 8

    8 45532694_ed2 1.6 Male Docking Valve • Drawing/Component list: T2X-16-511-IR Use the drawings and the component list for the specified unit. In the de scription below, the figures (xx) refer to the corresponding figures on the drawing. 1.6.1 Dismantling of the Male Docking Valve This operation requires, the following special tools and preparatio ...

  • Ingersoll-Rand DOSER 45532694 - page 9

    45532694_ed2 9 1.6.2 Assembly of the Male Docking Valve This operation requires, the following special tools and preparations: • A T2000-17-005 to compress the spring (two threaded rods and a bracket with three holes). • A flat, 7mm, fork spanner. • Screw locking liquid - Loctite 270 • Special high temperature grease for the sealings, Uniwa ...

  • Ingersoll-Rand DOSER 45532694 - page 10

    10 45532694_ed2 m) Place the cylinder (3) on the piston, (4). Align it, and press it into the hou sing. n) Position all parts on the docking valve according to the drawing. Tighten the four screws (19). Torque is 10 Nm. o) Finally, the pneumatic unit function should be tested. Connect the air and check the movement of the needle. 1.7 Female Docking ...

  • Ingersoll-Rand DOSER 45532694 - page 11

    45532694_ed2 11 1.8 Electrical contacts in docking station. Från nr. Name T2X-nr. Se drawing: Till (nr) Name T2X-nr. Se drawing: Comments WH - 18 XP62/19 P o les T2X-SF-008- IR T2X-20-029-IR,sheet 302.0 WH - 18 XP61/ 36POL T2X-SF-005- IR T2X-20-029-IR,sheet 302.0 Length: 400mm WH -17 XP62/19 POLES T2X-SF-008- IR T2X-20-029-IR,sheet 3021 WH - 17 XP ...

  • Ingersoll-Rand DOSER 45532694 - page 12

    12 45532694_ed2 www.irtools.com © 2007 Ingersoll Rand Company ...

Manufacturer Ingersoll-Rand Category Laptop Docking Station

Documents that we receive from a manufacturer of a Ingersoll-Rand DOSER 45532694 can be divided into several groups. They are, among others:
- Ingersoll-Rand technical drawings
- DOSER 45532694 manuals
- Ingersoll-Rand product data sheets
- information booklets
- or energy labels Ingersoll-Rand DOSER 45532694
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ingersoll-Rand DOSER 45532694.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ingersoll-Rand DOSER 45532694, service manual, brief instructions and user manuals Ingersoll-Rand DOSER 45532694. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ingersoll-Rand DOSER 45532694.

A complete manual for the device Ingersoll-Rand DOSER 45532694, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ingersoll-Rand DOSER 45532694 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ingersoll-Rand DOSER 45532694.

A complete Ingersoll-Rand manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ingersoll-Rand DOSER 45532694 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ingersoll-Rand DOSER 45532694, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ingersoll-Rand DOSER 45532694, that we can find in the current document
3. Tips how to use the basic functions of the device Ingersoll-Rand DOSER 45532694 - which should help us in our first steps of using Ingersoll-Rand DOSER 45532694
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ingersoll-Rand DOSER 45532694
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ingersoll-Rand DOSER 45532694 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ingersoll-Rand DOSER 45532694?

Use the form below

If you did not solve your problem by using a manual Ingersoll-Rand DOSER 45532694, ask a question using the form below. If a user had a similar problem with Ingersoll-Rand DOSER 45532694 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)