Manual Juniper Networks C2000

76 pages 1.29 mb
Download

Go to site of 76

Summary
  • Juniper Networks C2000 - page 1

    C-series Platforms C2000 and C4000 Hardware Guide Release 1.0.x Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 USA 408-745-2000 www.juniper.net Part Number: 530 – 020353 – 01, Revision A00 ...

  • Juniper Networks C2000 - page 2

    This product includes the Envoy SNMP Engine, developed by Epilogue Technology, an Integrated Systems Company. Copyright © 1986-1997, Epilogue Technology Corporation. All rights reserved. This program and its documentation were developed at private expense, and no part of them is in the public domain. This product includes memory allocation softwar ...

  • Juniper Networks C2000 - page 3

    End User License Agreement READ THIS END USER LICENSE AGREEMENT ( “ AGREEMENT ” ) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE. BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS CONTAINED HEREIN, YOU (AS CUSTOMER OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO ...

  • Juniper Networks C2000 - page 4

    7. Ownership. Juniper and Juniper's licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to the Software, associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance of any right, title, or interest in the Software or associated doc ...

  • Juniper Networks C2000 - page 5

    Table of Contents About This Guide ix Objectives ......................................................................................................ix Audience ........................................................................................................ix Documentation Conventions ...................................................... ...

  • Juniper Networks C2000 - page 6

    Rack-Mounted Installation .............................................................................14 Installation Guidelines .............................................................................14 Preparing the Equipment Racks ..............................................................14 Installing the System ....................... ...

  • Juniper Networks C2000 - page 7

    Chapter 8 Managing RAID Disks on a C-series Platform 39 C-series Platform Data Storage ......................................................................39 Managing Disks in a C-series Platform ...........................................................40 Replacing a Disk ......................................................................... ...

  • Juniper Networks C2000 - page 8

    Chapter 11 Declaration of Conformity 57 Declaration of Conformity .............................................................................57 Part 4 Index Index .............................................................................................................61 viii ■ Table of Contents C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 9

    About This Guide This preface provides the following guidelines for using the Hardware Guide : ■ Objectives on page ix ■ Audience on page ix ■ Documentation Conventions on page x ■ Related Juniper Networks Documentation on page xi ■ Obtaining Documentation on page xiii ■ Documentation Feedback on page xiii ■ Requesting Support on page ...

  • Juniper Networks C2000 - page 10

    Documentation Conventions Table 1 on page x defines the notice icons used in this guide. Table 2 on page x defines text conventions used throughout the documentation. Table 1: Notice Icons Description Meaning Icon Indicates important features or instructions. Informational note Indicates a situation that might result in loss of data or hardware dam ...

  • Juniper Networks C2000 - page 11

    Table 2: Text Conventions (continued) Examples Description Convention user@host# set local-address local-address Represents variables in SRC CLI commands. Italic sans serif typeface Another runtime variable is <gfwif>. In text descriptions, indicate optional keywords or variables. Angle brackets Press Enter. Indicates the name of a key on the ...

  • Juniper Networks C2000 - page 12

    Table 3: Juniper Networks C-series and SRC Technical Publications Description Document Core Documentation Set Describes the hardware platforms and how to install, maintain, replace, and troubleshoot them. The guide also includes specifications. C-series Hardware Guide Describes the SRC software and explains how to set up an initial configuration an ...

  • Juniper Networks C2000 - page 13

    Table 3: Juniper Networks C-series and SRC Technical Publications (continued) Description Document Provides a complete index of the SRC guides, excluding the C-series Hardware Guide and the SRC-PE Command Reference . SRC-PE Comprehensive Index Provides general information about the J-Web interface. J-Web User Interface Guide Application Library Des ...

  • Juniper Networks C2000 - page 14

    http://www.juniper.net/techpubs/docbug/docbugreport.html . If you are using e-mail, be sure to include the following information with your comments: ■ Document name ■ Document part number ■ Page number ■ Software release version Requesting Support For technical support, open a support case with the Case Manager link at http://www.juniper.ne ...

  • Juniper Networks C2000 - page 15

    Part 1 Product Overview ■ C-series Platform Overview on page 3 Product Overview ■ 1 ...

  • Juniper Networks C2000 - page 16

    2 ■ Product Overview C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 17

    Chapter 1 C-series Platform Overview This chapter provides introductory information about the C-series platform. It contains the following topics: ■ System Description on page 3 ■ C-series Platform Models on page 3 ■ C-series Model Components on page 5 ■ Network Management Tools on page 6 System Description The C-series platform enables you ...

  • Juniper Networks C2000 - page 18

    Table 4: C-series Model Differences Concurrent Subscribers Service Session Licenses Model 200,000 50,000 C2000 500,000 100,000 C4000 NOTE: The models illustrated in this book might look different from your model because of configuration variations. Figure 1: C2000, Front View Figure 2: C2000, Rear View Figure 3: C4000, Front View 4 ■ C-series Pla ...

  • Juniper Networks C2000 - page 19

    Figure 4: C4000, Rear View C-series Model Components The C2000 model and C4000 model contain the following components: ■ Internal memory ■ CPU ■ Hard drive — Each model has two hot-swappable, redundant drives in a redundant array of independent disks (RAID) 1 (mirror) configuration. The C2000 model has two hard drives located in the front, ...

  • Juniper Networks C2000 - page 20

    Figure 6: C4000 Power Supply ■ Console management port — Each model has one RS-232 port that accepts a DB-9 (female) connector for direct CLI access from a console terminal. ■ USB port — Each model has two ports that can be used for memory storage devices. ■ Ethernet interfaces — Each model has two 10/100/1000Base-T Ethernet ports (ETH0 ...

  • Juniper Networks C2000 - page 21

    SNMP MIB Management The system offers a complete SNMP interface for configuration, status, and alarm reporting. For more information, see SRC – PE Monitoring and Troubleshooting Guide . Network Management Tools ■ 7 Chapter 1: C-series Platform Overview ...

  • Juniper Networks C2000 - page 22

    8 ■ Network Management Tools C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 23

    Part 2 Initial Installation ■ Unpacking and Inspecting the C-series Platform on page 11 ■ Installing and Cabling the C-series Platform on page 13 ■ Powering Up the C-series Platform on page 19 ■ Setting the Initial Configuration on page 21 Initial Installation ■ 9 ...

  • Juniper Networks C2000 - page 24

    10 ■ Initial Installation C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 25

    Chapter 2 Unpacking and Inspecting the C-series Platform This chapter reviews shipping contents and unpacking procedures for the C-series platform. It contains the following topics: ■ Before You Begin on page 11 ■ Unpacking the Units on page 12 ■ Inspecting System Components and Accessories on page 12 ■ If You Detect or Suspect Damage on pa ...

  • Juniper Networks C2000 - page 26

    Unpacking the Units The systems are delivered boxed. For your convenience, we recommend that you unpack the system in the location where you want to install it. WARNING: Three people are required to install the system in a rack: two to lift it into position and one to screw it to the rack. Inspecting System Components and Accessories After you remo ...

  • Juniper Networks C2000 - page 27

    Chapter 3 Installing and Cabling the C-series Platform This chapter describes how to install the C-series platform and attach cables. It contains the following topics: ■ Before You Begin on page 13 ■ Freestanding Installation on page 13 ■ Rack-Mounted Installation on page 14 ■ Cabling the System on page 15 ■ The Next Step on page 18 Befor ...

  • Juniper Networks C2000 - page 28

    system with easy access to the connections that it needs for power, local communications, and remote communications. WARNING: Two people are required to lift the system. CAUTION: To prevent electrostatic damage to the system and its components, make sure persons handling the system wear an antistatic device. Rack-Mounted Installation We recommend t ...

  • Juniper Networks C2000 - page 29

    1. With one person standing on the left side of the chassis and another standing on the right side, lift the unit into the rack. 2. Position the system in its designated location in the equipment rack. Make sure the holes of the mounting brackets align evenly with the holes of the equipment rack on both sides. 3. Starting at the bottom of the syste ...

  • Juniper Networks C2000 - page 30

    ■ Two 10/100Base-T Ethernet ports — Each accepts an RJ-45 (male) connector, providing an out-of-band connection for LAN access through a Telnet session, SSH, or SNMP. ■ One RS-232 management port — Accepts a DB-9 (female) connector. This port provides direct CLI access from a console terminal. The management port is considered a data termin ...

  • Juniper Networks C2000 - page 31

    2. Insert the other end of the power cord into an appropriate AC power source. NOTE: To provide redundancy, do not terminate Power A and Power B leads at the same power source. Figure 7: C2000, Front View Figure 8: C2000, Rear View Figure 9: C4000, Front View Cabling the System ■ 17 Chapter 3: Installing and Cabling the C-series Platform ...

  • Juniper Networks C2000 - page 32

    Figure 10: C4000, Rear View The Next Step After you finish installing and cabling the system: ■ See Powering Up the C-series Platform on page 19. 18 ■ The Next Step C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 33

    Chapter 4 Powering Up the C-series Platform This chapter describes how to power up the C-series platform. It contains the following topics: ■ Powering Up on page 19 ■ Status LEDs on page 20 ■ The Next Step on page 20 Powering Up NOTE: In this procedure we assume that the system is already connected to a power source. For specifications of the ...

  • Juniper Networks C2000 - page 34

    Status LEDs The LEDs listed in Table 5 on page 20 are used on both models. Table 5: Model LEDs ON to OFF OFF to ON LED Color LED Indicator LED Label Power off Power on Green Power PWR Hard drive failure detected Hard drive is functioning Hard drive HD Fan okay Temperature error exists; fan failure Red Temperature TEMP Fan okay Failure detected Red ...

  • Juniper Networks C2000 - page 35

    Chapter 5 Setting the Initial Configuration This chapter discusses how to set up the C-series platform after powering it on. For basic information on the management of the system, see the SRC – PE Getting Started Guide . This chapter contains the following topics: ■ Configuration Overview on page 21 ■ Setting Up Management Access and Logging ...

  • Juniper Networks C2000 - page 36

    You can monitor and manage the system through either of these methods: ■ Console terminal — Connect a console (PC, Macintosh, or UNIX workstation) directly to the system's RS-232 serial port. ■ Remote console — Connect 10/100Base-T port (ETH0) to an Ethernet network, and run SSH or Telnet from a remote console. For initial access to th ...

  • Juniper Networks C2000 - page 37

    NOTE: The Juniper Networks database must be running before you start configuring the SRC software. Typically, you run the database in standalone mode only in testing environments. In standalone mode, the database does not communicate with other Juniper Networks databases; there is no data distribution and no redundancy. In community mode, databases ...

  • Juniper Networks C2000 - page 38

    3. Configure either a list of domain names to search, or create the domain name. We recommend configuring a list of domain names to search. To configure a list of domain names to search: [edit] root@host# set system domain-search [domain-name1, domain-name2, ...] For example: [edit] root@host# set system domain-search [my-domain.juniper.net domain. ...

  • Juniper Networks C2000 - page 39

    [edit interfaces eth0] user@host# set unit 0 family inet broadcast 192.2.0.255 4. Verify the interface configuration. [edit interfaces eth0] user@host# show unit 0 { family { inet { broadcast 192.2.0.255; } } } Configuring the System to Accept SSH and Telnet Connections You can enable SSH and Telnet to let users who have the appropriate privileges ...

  • Juniper Networks C2000 - page 40

    To configure the system to accept Telnet connections: ■ In edit mode, type the following command. [edit] user@host# set system services telnet Adding an Admin User Account Although root access is used for initial configuration of the system, user accounts are used to enter commands and statements at the CLI. Therefore, you must set up an admin ac ...

  • Juniper Networks C2000 - page 41

    user@host# show class super-user; full-name "John Doe"; uid 506; gid 100; level expert; complete-on-space on; 7. Set the password of the user. [edit] user@host# edit system login user myadmin authentication [edit system login user myadmin authentication] user@host# set plain-text-password The Next Step See “ Maintaining the System ” o ...

  • Juniper Networks C2000 - page 42

    28 ■ The Next Step C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 43

    Part 3 Hardware Maintenance Procedures and Specifications ■ Maintaining the System on page 31 ■ System Specifications on page 35 ■ Managing RAID Disks on a C-series Platform on page 39 ■ Installation Guidelines and Requirements on page 43 ■ Contacting Customer Support and Returning Hardware on page 53 ■ Declaration of Conformity on page ...

  • Juniper Networks C2000 - page 44

    30 ■ Hardware Maintenance Procedures and Specifications C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 45

    Chapter 6 Maintaining the System This chapter lists the tools, items, and steps needed for installing and uninstalling components. Other maintenance procedures must be performed by an authorized Juniper Networks technician. This chapter contains the following sections: ■ Required Tools and Items on page 31 ■ Storing Modules and Components on pa ...

  • Juniper Networks C2000 - page 46

    Storing Modules and Components Retain the packaging in which a component was shipped, and use this packaging to store the item. CAUTION: Failure to store electronic components correctly can lead to damage of these items. Follow these guidelines for storing components: ■ Store each component in a separate antistatic bag. ■ Store components in an ...

  • Juniper Networks C2000 - page 47

    NOTE: If the red TEMP LED is illuminated, either a critical or noncritical failure exists. CAUTION: If the TEMP LED is illuminated and none of the fans is spinning, quickly power down the system until a new set of fans is available. Operating a system with inadequate air circulation can damage the components. To remove a fan: 1. Unlock or loosen th ...

  • Juniper Networks C2000 - page 48

    2. Slide the locking tab (ejector button) to the left to release the module. See Figure 11 and Figure 12 . 3. Hold the tab to the left, and using the handle, slowly pull the power supply module out. To install a power supply module: 1. Hold the locking tab (ejector button) to the left, and slowly slide the module into the chassis until it clicks in ...

  • Juniper Networks C2000 - page 49

    Chapter 7 System Specifications This chapter lists the system specifications, requirements, and certifications for the system. Topics include: ■ C2000 Model Specifications on page 35 ■ C4000 Model Specifications on page 36 C2000 Model Specifications Table 6: C2000 Model Specifications Specification Category 33 lb (15 kg) Weight 3.5 (H) x 16.7 ( ...

  • Juniper Networks C2000 - page 50

    Table 6: C2000 Model Specifications (continued) Specification Category ■ Air intake occurs in the front of the system. ■ Air is exhausted out of the rear of the system. Airflow ■ Pending Electromagnetic Emissions Agency Certification C4000 Model Specifications Table 7: C4000 Model Specifications Specification Category 48 lb (22 kg) Weight 3.5 ...

  • Juniper Networks C2000 - page 51

    Table 7: C4000 Model Specifications (continued) Specification Category ■ Pending Electromagnetic Emissions Agency Certification C4000 Model Specifications ■ 37 Chapter 7: System Specifications ...

  • Juniper Networks C2000 - page 52

    38 ■ C4000 Model Specifications C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 53

    Chapter 8 Managing RAID Disks on a C-series Platform This chapter describes how to manage and view status information for RAID disks on a C-series platform. Topics include: ■ C-series Platform Data Storage on page 39 ■ Managing Disks in a C-series Platform on page 40 C-series Platform Data Storage A C-series platform provides data redundancy by ...

  • Juniper Networks C2000 - page 54

    Managing Disks in a C-series Platform The SRC CLI provides commands to let you monitor disk status, replace faulty disks, and reinitialize disks in the system. Replacing a Disk If a disk in the C-series platform fails, you can replace it while the other disk remains active. To replace a disk: 1. Disable the disk. user@host> request disk disable ...

  • Juniper Networks C2000 - page 55

    Controller Tasks TaskId Function Done% Container State Specific1 Specific2 ------ -------- ------- --------- ----- --------- --------- 100 Rebuild 0.3% 0 RUN 00000000 00000000 Reinitializing an Active Disk You can reinitialize a disk that is already active in a C-series platform. To reinitialize a disk: ■ Initialize the disk. user@host> reques ...

  • Juniper Networks C2000 - page 56

    Controller Tasks TaskId Function Done% Container State Specific1 Specific2 ------ -------- ------- --------- ----- --------- --------- No tasks currently running on the controller Table 8: show disk status Output Fields Field Description Field Name C indicates the channel number, ID the device ID, and L the device logical number C:ID:L Type of devi ...

  • Juniper Networks C2000 - page 57

    Chapter 9 Installation Guidelines and Requirements This chapter reviews preinstallation considerations such as electrical, environmental, and safety compliances for the C-series platforms. For complete system specifications, see “ System Specifications ” on page 35. This chapter contains the following topics: ■ Your Preinstallation Responsibi ...

  • Juniper Networks C2000 - page 58

    Environmental Requirements See “ System Specifications ” on page 35 for complete environmental specifications. Choose a location for the system that is dry, relatively dust free, well ventilated, and air conditioned. If you install equipment in a rack, be sure that the floor is capable of supporting the combined weight of the rack and the insta ...

  • Juniper Networks C2000 - page 59

    Safety Guidelines For your safety, before installing the system, review all safety warnings in this topic. WARNING: The recommended maximum ambient temperature is 40 ˚ ° C (104° F). For safe operation take into consideration the internal temperature within the rack. WARNING: Install equipment in the rack from the bottom upward. Doing this helps ...

  • Juniper Networks C2000 - page 60

    WARNING: Before servicing the system, turn off the power. WARNING: Remove jewelry (including rings, necklaces, and watches) before working on equipment that is connected to power lines. Metal objects heat up when connected to power and ground and can cause serious burns or become welded to the terminals. CAUTION: Evaluate the overall loading of the ...

  • Juniper Networks C2000 - page 61

    ■ The distance between the mounting holes in the two posts must be 18.31 inches ±.063 inch, as specified in EIA-310-D. ■ An optional mounting kit is available for midchassis mounting. Contact your Juniper Networks sales representative for more information. Space Requirements If you use an enclosed rack for the system, ensure that there is a mi ...

  • Juniper Networks C2000 - page 62

    ■ Route cables so that modules and field-replaceable units are easily accessible. ■ Route cables in a logical direction to prevent loss of connectivity to other equipment in the rack, to associated equipment in adjacent racks, or to the backbone network. For additional cable recommendations, consult the document GR-63 – CORE: Network Equipmen ...

  • Juniper Networks C2000 - page 63

    Hardware Compliance C – series platforms meet the hardware compliance requirements in this topic. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection agains ...

  • Juniper Networks C2000 - page 64

    Canadian Department of Communications Radio Interference Regulations This Class B (or Class A, if so indicated on the registration label) digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations. Réglement sur le brouillage radioélectrique du ministère des communications Cet appareil numérique de la Cl ...

  • Juniper Networks C2000 - page 65

    Les réparations de l'appareillage certifié devraient être confiées à un service d'entretien canadien désigné par lefournisseur. En cas de réparation ou de modification effectuées par l'utilisateur ou de mauvais fonctionnement del'appareillage, le service de télécommunications peut demander le débranchment de l'a ...

  • Juniper Networks C2000 - page 66

    Notes explicatives du ministère des Communications: limites visant les accessoires L'étiquette du ministère des Communications du Canada indique que l'appareillage est certifié, c'est-à-dire qu'il respecte certaines exigences de sécurité et de fonctionnement visant les réseaux de télécommunications. Le ministère ne ga ...

  • Juniper Networks C2000 - page 67

    Chapter 10 Contacting Customer Support and Returning Hardware See the Juniper Networks Web site for complete customer service information: ■ http://www.juniper.net/support/guidelines.html This chapter contains the following topics: ■ Contacting Customer Support on page 53 ■ Return Procedure on page 53 ■ Locating Component Serial Numbers on ...

  • Juniper Networks C2000 - page 68

    2. Obtain a Return Materials Authorization (RMA) number from the JTAC. See “ Information You Might Need to Supply to JTAC ” on page 54. Provide the following information in your e-mail message or during the telephone call: ■ Part number and serial number of the component ■ Your name, organization name, telephone number, and fax number ■ S ...

  • Juniper Networks C2000 - page 69

    3. Provides you with periodic updates on problem status and escalates the problem as appropriate according to escalation management guidelines. 4. Closes the case when you agree that the problem has been resolved. Tools and Parts Required To remove components from the chassis or the chassis from a rack before you return the chassis or components fo ...

  • Juniper Networks C2000 - page 70

    5. Remove the chassis from the rack. 6. Pack the chassis securely in a proper shipping container, covering the chassis with an ESD bag and placing packing foam on top of and around the chassis. 56 ■ Returning Products for Repair or Replacement C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 71

    Chapter 11 Declaration of Conformity This chapter contains the following sections: ■ Declaration of Conformity on page 57 Declaration of Conformity Pending Declaration of Conformity ■ 57 ...

  • Juniper Networks C2000 - page 72

    58 ■ Declaration of Conformity C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 73

    Part 4 Index ■ Index on page 61 Index ■ 59 ...

  • Juniper Networks C2000 - page 74

    60 ■ Index C2000 and C4000 1.0.x Hardware Guide ...

  • Juniper Networks C2000 - page 75

    Index A access, management ................................................ 6, 21 airflow .......................................................................... 44 rack-mounted installation and ..............................14 antistatic bags and containers ......................................32 assembly numbers, locating .................... ...

  • Juniper Networks C2000 - page 76

    management access ................................................. 6, 21 SNMP ...................................................................... 7 Management Information Bases .....................................7 manuals comments on .......................................................xiii mechanical requirements for distribution rack .... ...

Manufacturer Juniper Networks Category Biscuit Joiner

Documents that we receive from a manufacturer of a Juniper Networks C2000 can be divided into several groups. They are, among others:
- Juniper Networks technical drawings
- C2000 manuals
- Juniper Networks product data sheets
- information booklets
- or energy labels Juniper Networks C2000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Juniper Networks C2000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Juniper Networks C2000, service manual, brief instructions and user manuals Juniper Networks C2000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Juniper Networks C2000.

A complete manual for the device Juniper Networks C2000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Juniper Networks C2000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Juniper Networks C2000.

A complete Juniper Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Juniper Networks C2000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Juniper Networks C2000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Juniper Networks C2000, that we can find in the current document
3. Tips how to use the basic functions of the device Juniper Networks C2000 - which should help us in our first steps of using Juniper Networks C2000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Juniper Networks C2000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Juniper Networks C2000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Juniper Networks C2000?

Use the form below

If you did not solve your problem by using a manual Juniper Networks C2000, ask a question using the form below. If a user had a similar problem with Juniper Networks C2000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)