English dropdown-ico

Manual Emerson MVME2500

146 pages 2.88 mb
Download

Go to site of 146

Summary
  • Emerson MVME2500 - page 1

    Embedded Computing f or Busine ss-Critical Con tinuit y TM MVME2500 Installation and U se P/N: 6806800L01H January 2014 ...

  • Emerson MVME2500 - page 2

    © 2014 Emerson All rights reserved. T rade marks Emerson, Busine ss-Critical Continuity , Emerson Ne t work Po wer an d the Eme rson Network Power logo are trade marks and se r vice marks of Eme rson Electric Co. © 2014 Emerson Electric Co. All o ther product or service names are the propert y of the ir respective owners. Inte l ® is a trademark ...

  • Emerson MVME2500 - page 3

    Contents MVME2500 Installation and Use (6806800L01H) 3 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MVME2500 - page 4

    MVME2500 Installation and Use (6806800L01H) Contents 4 Contents Contents 3.4.1.3 USB Connector (J5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3.4.1.4 VMEBus P1 Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3.4.1.5 VMEBus P2 Conn ...

  • Emerson MVME2500 - page 5

    Contents MVME2500 Installation and Use (6806800L01H) 5 4.4.1 Real Time Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 4.4.2 Internal Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MVME2500 - page 6

    MVME2500 Installation and Use (6806800L01H) Contents 6 Contents Contents 5 Memory Maps and Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 5.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MVME2500 - page 7

    Contents MVME2500 Installation and Use (6806800L01H) 7 6.3.2 Booting from an Optional SATA Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 6.3.3 Booting from a USB Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 6.3.4 Booting from an SD C ...

  • Emerson MVME2500 - page 8

    MVME2500 Installation and Use (6806800L01H) Contents 8 Contents Contents Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MVME2500 - page 9

    List of T ables MVME2500 Installation and Use (6806800L01H) 9 T able 1-1 K ey Fe atures of the MVME2500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 T able 1-2 Board S tandard Compli ances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 T able 1 ...

  • Emerson MVME2500 - page 10

    MVME2500 Installation and Use (6806800L01H) 10 List of Tables T able 5-6 PLD Month R egister . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 T able 5-7 PLD Da y Regist er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson MVME2500 - page 11

    List of Figure s MVME2500 Installation and Use (6806800L01H) 11 Figure 1-1 Seri al Number L ocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 3-1 Compone nt Lay out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Figure ...

  • Emerson MVME2500 - page 12

    MVME2500 Installation and Use (6806800L01H) 12 List of Figures ...

  • Emerson MVME2500 - page 13

    MVME2500 Installation and Use (6806800L01H) 13 About this Manual Overview of Contents This manu al is divided into the f ollowing chap ters and appendic es.  Introduction giv es an ove r view of the f ea tures of the product, standard c omplianc es, mechanical d ata, and ordering in form ation.  Hardware Pre paration and Inst allatio n outlin ...

  • Emerson MVME2500 - page 14

    MVME2500 Installation and Use (6806800L01H) About this Manual 14 About this Manual DUAR T Dual U ART EEPROM Erasable Programmable R ead-Only Memor y FCC Fede ral Communications C ommission GB GigaBy te Gbit Gig abit Gbps Gigabits pe r second I/O Input/Output IEEE Institute of Electrical and Electronics Engineers LED Light Emitting Diode MHz Megahe ...

  • Emerson MVME2500 - page 15

    About this Manual MVME2500 Installation and Use (6806800L01H) 15 Conv entions The follo wing table describes the c onven tions used throughout this manual. USB Universal Se rial Bu s VIT A VMEbu s Inte rnation al T rade Associ ation VME V ersa Module Eurocard XMC PCI Express Mezzanine Car d T e rm Definition Notation De scription 0x00000000 T ypica ...

  • Emerson MVME2500 - page 16

    MVME2500 Installation and Use (6806800L01H) About this Manual 16 About this Manual | Logical OR Indicates a h azardous situa tion which, if not a voided, could re sult in death or se rious injur y Indicates a h azardous situa tion which, if not a voided, may re sult in minor or moderat e injury Indicates a prope r t y damage mes sage No dange r enc ...

  • Emerson MVME2500 - page 17

    About this Manual MVME2500 Installation and Use (6806800L01H) 17 Summar y of Changes This manu al has bee n revised and replac es all prior editions. Part Number Publication D ate Description 6806800L01A June 2010 First edition 6806800L01B October 2010  This ve rsion includes updat es and revisions for the EA relea se of the MVME2500.  T able ...

  • Emerson MVME2500 - page 18

    MVME2500 Installation and Use (6806800L01H) About this Manual 18 About this Manual 6806800L01E July 2011  Updat ed T able "Available Boar d Vari ants" on page 22 .  Updat ed Appendix B, Re lated Docume nta tion, on pag e 129 . 6806800L01F August 2011  Changed title o f Section 3.4.1 to Fron t Panel Con ne c to rs .  Edited F r ...

  • Emerson MVME2500 - page 19

    Chapter 1 MVME2500 Installation and Use (6806800L01H) 19 Introduc tion 1.1 Overview The MVME2500 is a VMEbus bo ard ba sed on the F reescale QorlQ P2010 (single-c ore) or P2020 (dual-core) proc essor . It has a 6U f orm-fac tor and h as an expansion slo t for an option al PCI Mezzanine Card (PMC) or PCI eXpress Mezzanine Car d (XMC). It comes with ...

  • Emerson MVME2500 - page 20

    Introduction MVME2500 Installation and Use (6806800L01H ) 20 F ront pane l I/O  Micro DB9 RS -232 seri al console por t  USB 2.0  T wo RJ45 10/100/1000BASE - T Ethernet  Re set/Abor t switch  F ail LED and Use r LED  PMC/XMC front pane l I/O (optional) Backplane I/O  VME Bus  RTM I/O (through VME P2)  PMC/XMC I/O with P4 ...

  • Emerson MVME2500 - page 21

    Introduction MVME2500 Installation and Use (6806800L01H) 21 1.2 Standard Complianc es The product is designed to meet the f ollowing stan dar ds. Re sults are pending until testing is finished. For Dec laration o f Conf ormit y , refe r MVME2500 Serie s Declara tion of Con formit y . Opera ting System  Based from B SP provided by F reescale whic ...

  • Emerson MVME2500 - page 22

    Introduction MVME2500 Installation and Use (6806800L01H ) 22 1.3 Mechanical D ata The follo wing table provides details ab out the dime nsions and weight o f the board. 1.4 Ordering Information As of the printing da te of this m anual, this guide supports the models listed belo w . T ab le 1-3 Mechani cal Da ta Fe ature Value Height 233.44 mm (9.2 ...

  • Emerson MVME2500 - page 23

    Introduction MVME2500 Installation and Use (6806800L01H) 23 As of the printing da te of this m anual, the f ollowing board acce ssories are a vailable . T ab le 1-5 Av ailable Board A cces sori es Orde r Number Descrip tion VME-HDMNTKIT VME HD mounting kit VME-64G BSSDKIT VME 64GB SSD and moun ting kit MVME7216E-101 VME RTM (IEEE h andle) MVME7216E ...

  • Emerson MVME2500 - page 24

    Introduction MVME2500 Installation and Use (6806800L01H ) 24 1.5 Produc t Identification The follo wing graphics shows the location of the s eri al number la bel. Figure 1-1 Se rial Numbe r Loc ation ...

  • Emerson MVME2500 - page 25

    Chapter 2 MVME2500 Installation and Use (6806800L01H) 25 Hardware Prep aration and Installation 2.1 Overview This chap ter provide s installation and saf et y instruc tions for this product. Installation instruc tions f or the option al PMC and transition module are also included. A fully impleme nted MVME2500 consists o f the base bo ard plu s: ? ...

  • Emerson MVME2500 - page 26

    Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 26 2.2 Unpacking and Inspecting the Board Re ad all notices and cautions prior to unpacking the product. Shipment Inspection 1. V erif y tha t you hav e receiv ed all items o f your shipmen t. 2. Check f or dam age and report any dama ge or diffe renc es to cust omer ...

  • Emerson MVME2500 - page 27

    Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H) 27 2.3.1 Environmental Requirements Opera ting tempe ratures ref er to the te mpera ture of the air circ ulating around the boar d and not to the c omponent te mperature . T ab le 2-1 Enviro nmen tal R equireme nts Characteristics Commerc ial V ersions Extended T e mp ...

  • Emerson MVME2500 - page 28

    Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 28 2.3.2 Pow er Requirements The board u ses +5.0 V from the VMEbus backpl ane. On bo ard powe r supply genera tes the required voltages f or the various ICs. The MVME2500 connects the +12 V and -12 V supplies from the backplane to the PMC sit es, while the +3.3 V po ...

  • Emerson MVME2500 - page 29

    Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H) 29 The follo wing table shows the powe r available whe n the MVME2500 is installed in eithe r a three row or five ro w cha ssis and when PMCs are prese nt. 2.3.3 Equipment Requirements The follo wing are recomme nded to c omplete a MVME2500 syst em :  VMEbus syst e ...

  • Emerson MVME2500 - page 30

    Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 30 2.5 Installing Acc essories 2.5.1 Rear T ransition Module The MVME2500 does not support hot swap . R emov e power t o the rear slo t or system be fore installing the module. A PCMI/O Module (PIM) needs t o be manually c onfigured and installed bef ore placing the ...

  • Emerson MVME2500 - page 31

    Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H) 31 4. Install the top and bott om edge of the transiti on module into the re ar guides of the cha ssis. 5. Ensure tha t the leve r s of the two injector/ejectors are in the out ward position. 6. Slide the transition module int o the chas sis until resistance is f elt. ...

  • Emerson MVME2500 - page 32

    Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 32 1. Attach an ESD strap t o your wrist. A ttach the othe r end of the strap to the c ha ssis as a ground. Mak e sure that it is secure ly f aste ned throughout the procedure. 2. R emo ve the PMC/XMC fille r plat e from the front pane l cut-out. 3. Slide the front b ...

  • Emerson MVME2500 - page 33

    Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H) 33 1. Attach an ESD strap to y our wrist. Attach the othe r end o f the strap to an electrical ground. Mak e sure that it is securely f aste ned throughout the procedure. 2. R emo ve VME fille r panels from the VME e nclosures, a s appropriat e. 3. Install the top and ...

  • Emerson MVME2500 - page 34

    Hardware Preparation and Installation MVME2500 Installation and Use (6806800L01H ) 34 2.7 Completing the Installation The board is de signed to opera te as an application-specific c omputer bl ade or an inte lligent I/O board/carrie r . It can be used in any slo t in a VME chas sis. Once the boar d is inst alled, you are ready t o connect periphe r ...

  • Emerson MVME2500 - page 35

    Chapter 3 MVME2500 Installation and Use (6806800L01H) 35 Controls, LEDs, and Connectors 3.1 Board Lay out The follo wing figure shows the compone nts and connectors on the MVME2500. Figure 3-1 C omponen t Lay out ...

  • Emerson MVME2500 - page 36

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 36 3.2 F ront Panel The follo wing compone nts are f ound on the MVME2500 front pane l. Figure 3-2 F ront Pane l LEDs, Conn ectors and Swit ches ...

  • Emerson MVME2500 - page 37

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 37 3.2.1 Re set S witch The MVME2500 ha s a single push butt on switch th at ha s both the abor t and reset functions. Pressing the swit ch for le ss than three seconds ge nerate s an abor t inte rr up t to the P20x0 QorIQ PIC. Holding it down f or more than three sec onds w ...

  • Emerson MVME2500 - page 38

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 38 T ab le 3-1 Fron t Panel LEDs Label Function Loca tion Color Description USER 1 User Defined F ront pane l Off Y ellow Red By default Use r Soft ware Con trollable. R efe r to the "Use r LED Registe r ." Use r Soft ware Con trollable. R efe r to the "Use r ...

  • Emerson MVME2500 - page 39

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 39 3.3.2 Onboard LEDs The onboard LEDs are list ed below . T o view its loca tion on the board, see Figure 3-1 on page 35 . 3.4 Connector s This section describes the pin a ssignmen ts and signals for the c onnectors on the MVME2500. Figure 3-4 Onboard LEDs T ab le 3-2 Onboa ...

  • Emerson MVME2500 - page 40

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 40 3.4.1 Front P anel Connec tors The follo wing connectors are found on the outside o f the MVME2500. These c onnectors are divided between the front pane l connectors and the backplane connectors. The front panel connectors include the J1 and J5 connectors. The backplane ...

  • Emerson MVME2500 - page 41

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 41 3.4.1.2 Front Panel Serial Port (J4) There is one fron t acces s asynchronou s serial port interface tha t is routed to the micro mini DB - 9 front pane l connector . A male-to-male mi cro -mini DB9 adap ter cable is avail able under Emerson part number SERIAL -MINI -D (3 ...

  • Emerson MVME2500 - page 42

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 42 3.4.1.3 USB Connector (J5) The MVME2500 use s upright USB rec ep t able mounted in the fron t panel. 3.4.1.4 VMEBus P1 Connector The VME P1 connector is a 160-pin DIN. The P1 c onnec tor provides po wer and VME signals f or 24-bit address and 16-bit d ata. The pin assign ...

  • Emerson MVME2500 - page 43

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 43 10 SYSCLK BGIN3 SYSF AIL GA0 GND 11 GND BGOUT3 BERR GA1 NC 12 DS1 BR0 SYSRESE T +3.3V (not u sed) GND 13 DS0 BR1 L WORD GA2 NC 14 WRITE BR2 AM 5 +3.3V (no t used) GND 15 GND BR3 ADD 23 GA3 NC 16 D T ACK AM 0 ADD 24 +3.3V (not used) GND 17 GND AM 1 ADD 25 GA4 NC 18 AS AM 2 ...

  • Emerson MVME2500 - page 44

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 44 3.4.1.5 VMEBus P2 Connector The VME P2 connector is a 160-pin DIN. R ow B of the P2 c onnector provides powe r to the MVME2500 and to the uppe r eight VMEbu s address lines and additional 16 VMEbu s data lines. The Z, A, C, and D pin assignmen ts for the P2 connector are ...

  • Emerson MVME2500 - page 45

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 45 3.4.2 O nboard Connector s 3.4.2.1 Flash Program Connector (P7) The Fla sh Program Connector is depopul ated in the production ve rsion of the MVME2500. Howe ve r , eac h pin is exposed f or the 60-pin header c onnec tor f or the JT AG bound ar y scan. 23 PMC IO 46 D A T ...

  • Emerson MVME2500 - page 46

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 46 3.4.2.2 SATA Connector (J3) The onboard c ustomi zed S A T A connector is compatible with the Eme r son SA T A kit, name ly VME-64G BS SDKIT and IVME7210-MNTKIT . GND 10 Ma ster OUT Sl ave IN (MOS I) T ab le 3-8 Fla sh Programming Heade r (P7) (contin ued) Pin Signal Des ...

  • Emerson MVME2500 - page 47

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 47 3.4.2.3 PMC Connectors The MVME2500 suppor ts only one PMC site . It utilizes J14 t o suppor t PMC I/O tha t goes to the RTM PMC. The tables be low show the pinout detail of J11, J12, J13 and J14. See Figure 3-1 f or the location of the PMC c onnec tors. 19 NC 39 +3.3V 20 ...

  • Emerson MVME2500 - page 48

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 48 18 +5V 50 +5V 19 +3.3V 51 GND 20 AD 31 52 CBE0 21 AD 28 53 AD 6 22 AD 27 54 AD 5 23 AD 25 55 AD 4 24 GND 56 GND 25 GND 57 +3.3V 26 CBE3 58 AD 3 27 AD 22 59 AD 2 28 AD 21 60 AD 1 29 AD 19 61 AD 0 30 +5V 62 +5V 31 +3.3V 63 GND 32 AD 17 64 RE Q64 T ab le 3-11 PMC J12 C onne ...

  • Emerson MVME2500 - page 49

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 49 10 NC 42 SERR 11 BUSMODE2 (Pulled UP) 43 CBE1 12 +3.3V 44 GND 13 PCI RESE T 45 AD 14 14 BUSMODE3 (PULLED D WN) 46 AD 13 15 +3.3V 47 M66EN 16 BUSMODE4 (PULLED D WN) 48 AD 10 17 NC 49 AD 8 18 GND 50 +3.3V 19 AD 30 51 AD 7 20 AD 29 52 RE QB 21 GND 53 +3.3V 22 AD 26 54 GNTB 2 ...

  • Emerson MVME2500 - page 50

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 50 2 GND 34 AD48 3 GND 35 AD 47 4 CBE7 36 AD 52 5 CBE6 37 AD 45 6C B E 5 3 8 G N D 7 CBE4 39 +3.3V 8 GND 40 AD 40 9 +3.3V 41 AD 43 10 P AR64 42 AD 42 11 +3.3V 43 AD 41 12 AD 62 44 GND 13 AD 61 45 GND 14 GND 46 AD 40 15 GND 47 AD 39 16 AD 60 48 AD 38 17 AD 59 49 AD 37 18 AD ...

  • Emerson MVME2500 - page 51

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 51 29 AD 51 61 NC 30 AD 50 62 GND 31 AD 49 63 GND 32 GND 64 NC T ab le 3-13 PMC J14 C onnector Pin Signal Descrip tion Pin Signal Des cription 1 PMC IO 1 33 PMC IO 33 2 PMC IO 2 34 PMC IO 34 3 PMC IO 3 35 PMC IO 35 4 PMC IO 4 36 PMC IO 36 5 PMC IO 5 37 PMC IO 37 6 PMC IO 6 3 ...

  • Emerson MVME2500 - page 52

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 52 3.4.2.4 JTAG Connector (P6) The JT A G Connec tor can be u sed in conjunction with the JT A G board and ASSET hardw are. 21 PMC IO 21 53 PMC IO 53 22 PMC IO 22 54 PMC IO 54 23 PMC IO 23 55 PMC IO 55 24 PMC IO 24 56 PMC IO 56 25 PMC IO 25 57 PMC IO 57 26 PMC IO 26 58 PMC ...

  • Emerson MVME2500 - page 53

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 53 19 GPO0 20 NC 21 NC 22 SC AN 2 TMS 23 NC 24 SC AN 2 TDO 25 SCAN 2 TCK 26 +3.3V FROM +5V 27 GND 28 SCAN 2 TDI 29 NC 30 NC 31 SCAN 3 TMS 32 SCAN 3 TCK1 33 SCAN 3 TDO 34 SCAN 3 TCK 2 35 +2.5V 36 SC AN 3 T CK 3 37 SCAN 3 TDI 38 GND 39 SCAN 3 TR ST 40 SCAN 3 TCK3 41 SCAN 4 TCK ...

  • Emerson MVME2500 - page 54

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 54 3.4.2.5 COP Connector (P6) The C OP heade r is used f or the CPU debug. The pin as signmen t is dic tated b y Freescale and is compa tible with the processor’s de bugging tool. 3.4.2.6 SD Connector (J2) T ab le 3-15 COP He ade r (P10) Pin Signal Descrip tion 1 JT A G T ...

  • Emerson MVME2500 - page 55

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 55 3.4.2.7 XMC Connector (XJ2) The MVME2500 ha s one XMC connec tor (XJ2) th at suppor ts XMC cards with J15 c onnec tor . It can also suppor t XMC cards with J16 c onnec tor without e ncoun tering an y mechanical int er feren ce. 2 COMMAND 3G N D 4 V CC (+3.3V) 5 CLOCK 6G N ...

  • Emerson MVME2500 - page 56

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 56 3.4.2.8 Miscellaneous P2020 Debug Connectors 9 NC NC NC NC NC +3.3V 10 GND GND JT A G TDO GND GND GA 0 11 TX0 TX0 - BIST (PULLED UP) TX1 + TX1 - +3.3V 12 GND GND GA 1 GND G ND PRESENT 13 NC NC NC NC NC +3.3V 14 GND GND GA 2 GND G ND I2C DA T A 15 NC NC NC NC NC +3.3V 16 ...

  • Emerson MVME2500 - page 57

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 57 3.5 S witches These switc hes control the c onfiguration of the MVME2500. 3.5.1 Geographical Address S witch (S1) The T si148 VMEbus S t atu s Regist er pro vides the VMEbu s geographical address of the MVM2500. The switch re flects the inverted states o f the geographica ...

  • Emerson MVME2500 - page 58

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 58 Note th at this switch is wired in paralle l with the geographical address pins on the 5-row connector . Thes e switches must be in the "OFF" po sition when installed in a 5-row c ha ssis in orde r to get the c orrec t address from the P1 c onnec tor . This swi ...

  • Emerson MVME2500 - page 59

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H) 59 3.5.2 SMT Configuration S witch (S2) This eight po sition SMT configura tion switch c ontrols the flash bank writ e-protect, selects the fla sh boot image , and controls the sa fe star t ENV settings. The de fault setting on all switch positions is "OFF" and is ...

  • Emerson MVME2500 - page 60

    Controls, LEDs, and Connectors MVME2500 Installation and Use (6806800L01H ) 60 6 OFF (WP Enabled) MA STER_WP_DIS A BLED Writ e-Protect Disable switch For I2C write-pro tec t only . 7 OFF (F ront) GBE_MUX_SEL Use r Defined switch tha t will select if the GBE PHY will function on the front panel or on the Back PLANE 8 OFF (CPU Re set Dea sserted) Re ...

  • Emerson MVME2500 - page 61

    Chapter 4 MVME2500 Installation and Use (6806800L01H) 61 F unctional Description 4.1 Block Diagr am The MVME2500 block diagram is illu strated in Figure 4-1 . All vari ants pro vide front pane l acce ss to one se rial por t via a micro-mini DB -9 connector , t wo 10/100/1000 Ethe rnet por t (one is con figurable to be routed on the fron t p anel or ...

  • Emerson MVME2500 - page 62

    Functional Description MVME2500 Installation and Use (6806800L01H ) 62 This section describes the prot ocol and in terf aces pro vided in the QorIQ P20x0 integrated and is utiliz ed by the MVME2500. 4.2.1 e500 Processor Core The QorIQ integra ted proc essors off er dual high pe r form ance e500v2 core (P2020) and a single e500v2 core (P2010). It op ...

  • Emerson MVME2500 - page 63

    Functional Description MVME2500 Installation and Use (6806800L01H) 63  Autom atic DRAM initialization s equenc e or soft ware-controlled initi alization sequenc e and automa tic DRAM data initialization.  W rite leve ling for DDR3 memorie s and suppor ts up to e ight posted re freshes. 4.2.3 PCI Express Inter fac e The PCI Express in terface ...

  • Emerson MVME2500 - page 64

    Functional Description MVME2500 Installation and Use (6806800L01H ) 64 4.2.8 DU ART The chipse t provides t wo univ ersal asynchronou s receiv er/transmitt er (U ART), each o f which acts independe ntly of the o ther . Each U ART is clock ed by the CCB clock and is c ompatible with PC16522D. As a full-duplex interface , it provides a 16-b y te FIF ...

  • Emerson MVME2500 - page 65

    Functional Description MVME2500 Installation and Use (6806800L01H) 65 4.2.13 Common On-Chip Processor (C OP) The C OP is the debug int erface of the QorIQ P20x0 Proc essor . It allows a remo te compute r syste m to acce ss and c ontrol the int ern al opera tion of the proce ssor . The COP in terface connects primarily through the JT AG and ha s add ...

  • Emerson MVME2500 - page 66

    Functional Description MVME2500 Installation and Use (6806800L01H ) 66 See Re al- Time Clock Batt ery , on page 77 for more inf ormation on the re al time clock back -up batte r y . 4.4.2 Internal Timer The proces sor's intern al timer is compos ed of ei ght global timers divided into two groups of four time r s ea ch. Each time h as f our ind ...

  • Emerson MVME2500 - page 67

    Functional Description MVME2500 Installation and Use (6806800L01H) 67 4.6 SPI Bus Int er fac e The enh anced seri al periphe ral interface (eSPI) allo ws the device t o exchange d ata with periphe ral devices such a s EEPROMs, R T C, Flash and the lik e. The eS PI is a full-duplex synchronou s, characte r -oriented c hanne l that supports a simple ...

  • Emerson MVME2500 - page 68

    Functional Description MVME2500 Installation and Use (6806800L01H ) 68  F actor y Pre-Programming - Programming the SPI Fla sh usually take s a while. Ideally , the SPI Fl ash should be pre-programmed in the factor y bef ore shipment.  IC T Programming - This programming is done on expos ed test poin ts using a bed of n ails tester . 4.6.3 Fi ...

  • Emerson MVME2500 - page 69

    Functional Description MVME2500 Installation and Use (6806800L01H) 69 The MVME2500 FPGA con trols the chip se lec t to SPI de vices A and B. The FPGA c hip select con trol is based on the S witch Bank (S2-2). At pow er -up, the s election of the SPI boo t devic e is stric tly ba sed upon the Swit ch Bank (S2-2) setting. De pending on the S2-2 setti ...

  • Emerson MVME2500 - page 70

    Functional Description MVME2500 Installation and Use (6806800L01H ) 70 The MVME2500 suppor ts autom atic switch ov er . If booting one devic e is not succes sful, the watc hdog will trigger the board rese t and it will automatically boo t on the othe r device . 4.6.4 Crisis Rec ove r y The MVME2500 provides an inde penden t boot firmware rec ove r ...

  • Emerson MVME2500 - page 71

    Functional Description MVME2500 Installation and Use (6806800L01H) 71 Only 115200 bps and 9600 bps are supported. The default baud ra te on the front pane l serial is 9600 kbps. 4.8 R ear U ART Control The MVME2500 utiliz es the Exar ST16C554 quad U ART (QUAR T) to provide four addition al por ts to the R TM. These devic es fe ature 16 bytes of tra ...

  • Emerson MVME2500 - page 72

    Functional Description MVME2500 Installation and Use (6806800L01H ) 72 PMC/XMC sites are k eyed f or 3.3V PMC signaling. PMC and XMC add-on cards must h ave a hole in the 3.3 V PMC k eying position in or der to be popul ated on the MVME2500. The XMC specifica tion accommodat es this since it is expected tha t carrier cards will host bo th XMC and P ...

  • Emerson MVME2500 - page 73

    Functional Description MVME2500 Installation and Use (6806800L01H) 73 The MVME2500 use s Mar ve ll's 88SE6121B2-NA A2C000 SA T A c ontrolle r and suppor ts up to 1.5 Gbps (SA T A Gen 1). F or status indica tors, it ha s an onboard gree n LED, D12 and D13 f or SA T A link and SA T A ac tivit y statu s respective ly . 4.11 VME Suppor t The MVME2 ...

  • Emerson MVME2500 - page 74

    Functional Description MVME2500 Installation and Use (6806800L01H ) 74 The RTM I2C ad dress can be c onfigured by the u ser and should not c ontain duplicate addresse s to av oid conflict. For more inf ormation, see I2C Bu s Device Addres sing, on pa ge 118 . 4.14 R eset/C ontrol FPGA The FPGA provides the f ollowing func tions:  Pow er c ontrol ...

  • Emerson MVME2500 - page 75

    Functional Description MVME2500 Installation and Use (6806800L01H) 75 4.15.2 Po wer Up Sequencing R equirements The powe r up sequence des cribes the voltage rail pow er up timing, which is de signed to suppor t all the chip supply v oltage sequencing require m e nt. +2.5 V 2.375 V 2.625 V +1.8 V 1.7 V 1.9 V +1.5 V 1.425 V 1.575 V +1.2 V 1.14 V 1.2 ...

  • Emerson MVME2500 - page 76

    Functional Description MVME2500 Installation and Use (6806800L01H ) 76 4.16 Clock S truc ture A total o f three ID T chips, a discre te osc illat or and cr yst al to support all the clock requiremen ts of MVME2500. 4.17 R eset S truc ture MVME2500 rese t will initiat e after the powe r up sequence if the 1.5 V pow er supply is "GOOD". Whe ...

  • Emerson MVME2500 - page 77

    Functional Description MVME2500 Installation and Use (6806800L01H) 77 4.17.1 Re set Sequence The timing of the rese t sequence supports each chip re set require ments with re spect to the powe r supply . 4.18 Thermal Management The MVME2500 utiliz es t wo on-board t empe rature se nsor s : one for the boar d and the other f or the CPU te mpera ture ...

  • Emerson MVME2500 - page 78

    Functional Description MVME2500 Installation and Use (6806800L01H ) 78 4.20 Debugging Suppor t The follo wing inf ormation sho ws the details of Eme r son de bugging suppor t as applied to the MVME2500. 4.20.1 POST Co de Indicator The follo wing table shows the LED status o f the P OST C odes. F or the location of the POST C ode LEDs, see Onboard L ...

  • Emerson MVME2500 - page 79

    Functional Description MVME2500 Installation and Use (6806800L01H) 79 The JT A G board provides three diff erent c onnec tors for the ASSET hardware , flash programming and the MVME2500 JT A G connector . The board is equipped with T TL buff ers to help impro ve the sign al qualit y as it trav erses ove r the wires. 4.20.3 Custom Debugging Cu stom ...

  • Emerson MVME2500 - page 80

    Functional Description MVME2500 Installation and Use (6806800L01H ) 80 ...

  • Emerson MVME2500 - page 81

    Chapter 5 MVME2500 Installation and Use (6806800L01H) 81 Memor y Maps and R egisters 5.1 Overview System re sources including syste m control and statu s registers, external time r s, and the QUAR T are mapped into 16 MB a ddress range acc essible from the MVME2500 local bus through the P20x0 QorIQ LBC. 5.2 Memor y Map The follo wing table shows th ...

  • Emerson MVME2500 - page 82

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 82 5.3 Flash Memor y Map The table below lists the me mor y range designated t o U -boot and ENV variable s. 5.4 Linux De vice s Memor y Map The table below lists the me mor y ranges designat ed to diffe rent devic es in Linux. T ab le 5-2 Fla sh Memor y Map Descrip tion Memory ...

  • Emerson MVME2500 - page 83

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 83 FPGA 0xffdf0000 0xffdf0fff 4 KB ecm local acces s window CCSR 0xffe00000 0xff e00ffff 4 KB ecm (Error Correction Module) CCSR 0xffe01000 0xffe01fff 4 KB Memory Controller CCSR 0xffe02000 0xffe02fff 4 KB I2C1 CCSR 0xffe03000 0xffe030ff 256 B I2C2 CCSR 0xffe03100 0xff e031ff 256 ...

  • Emerson MVME2500 - page 84

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 84 5.5 Programmable Logic De vice (PLD) R egisters 5.5.1 PLD R evision Regist er The MVME2500 provides a PLD re vision register th at can be read by the syst em so f t ware t o dete rmine the current v ersion of the timers/registers PLD . 5.5.2 PLD Y ear Regist er The MVME2500 P ...

  • Emerson MVME2500 - page 85

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 85 5.5.3 PLD Month Register The MVME2500 PLD provide s an 8-bit register whic h contains the build month of the timers/registe rs PLD. 5.5.4 PLD Da y Register MVME2500 PLD provides an 8-bit regist er which c o ntains the build day o f the timers/registers PLD. 5.5.5 PLD Sequence ...

  • Emerson MVME2500 - page 86

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 86 5.5.6 PLD Po wer Good Monit or Regist er The MVME2500 PLD provides an 8-bit regist er which indica tes the instantaneous statu s of the supply’s power good si gnals. B i t 76543210 Field PLD Rev OPER R RESE T 02 T ab le 5-8 PLD Seque nce R egister REG PLD Re vision Regist e ...

  • Emerson MVME2500 - page 87

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 87 5.5.7 PLD LED Control R egister The MVME2500 PLD provide s an 8-bit registe r which con trols the eight LEDs. 1 - LED on 0 - LED off For more in form ation on LEDs, refe r to T able "Front P anel LEDs" on p age 38 and T able "Onboard LEDs Sta tus" on page 3 ...

  • Emerson MVME2500 - page 88

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 88 5.5.8 PLD PCI/PMC/XMC Monitor R egister The MVME2500 PLD provides an 8-bit regist er whic h indica tes the status o f the PCI/PMC/XMC inte r face sign als. T ab le 5-11 PLD PCI/PMC/XMC Monit or Registe r REG PLD PCI_PMC_XMC_MNTR - 0xFFDF001D B i t 76543210 Field R SVD RSVD RS ...

  • Emerson MVME2500 - page 89

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 89 5.5.9 PLD U -Boot and TSI Monitor R egister The MVME2500 PLD provide s an 8-bit registe r which indicate s the st atu s of the U -Boot's normal e nvironme nt switc h and TSI in te r face si gnals. 5.5.10 PLD Boot Bank R egister The MVME2500 PLD provide s an 8-bit registe ...

  • Emerson MVME2500 - page 90

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 90 Field SPI_GOODR eg (write 0xA4 int o this reg to indicate succ essful loading of the U- Boot. BOO T_B L OCK_A BOO T_S PI OPER R/W R R R E S E T 000000X 0 Fiel d Descrip tion BOO T_BLOCK_A Boot Block Manu al Selector Switch 1 - SPI0 0 - SPI1 BOO T_SPI Actual Boot Bank 1 - SP1 ...

  • Emerson MVME2500 - page 91

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 91 5.5.11 PLD W rite Protect and I2C Debug Regist er The MVME2500 PLD provide s an 8-bit register whic h is used to indicat e the status o f I2C and SPI write-pro tec t manu al switches and is us ed to con trol the SPI write-en able. I2C debug ports are also provided in this regi ...

  • Emerson MVME2500 - page 92

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 92 I2C_DEBUG_EN I2C debug por ts (I2C_1_D and I2C_1_C) en able 1 - Drive En abled 0 - Drive Disabled SERIAL_FLASH_WP SPI devic es write-pro tect register 1 - W rite-protect en abled 0 - W rite-protect disabled I2C_1_D I2C debug port-D ata I2C_DEBUG_EN=0 HiZ - T ri-Sta ted I2C_DE ...

  • Emerson MVME2500 - page 93

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 93 5.5.12 PLD T est R egister 1 The MVME2500 PLD provide s an 8-bit gene ral purpose read/write regist er which can be u sed by the so f t ware f or PLD testing or gene ral status bit st orage. 5.5.13 PLD T est R egister 2 The MVME2500 PLD provide s an 8-bit gene ral purpose read ...

  • Emerson MVME2500 - page 94

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 94 5.5.14 PLD GPIO2 Int errupt Registe r The Abor t switch , Tick Timer 0, 1 and 2 inte rr up ts are ORed t ogethe r . The MVME2500 provides an inte rrupt register th at the syste m sof t ware re ads to det ermine whic h device the in terrupt originat ed from. GPIO2 will be driv ...

  • Emerson MVME2500 - page 95

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 95 5.5.15 PLD Shutdo wn and Reset Control and R eset Reason R egister The MVME2500 provides an 8-b it register t o execut e the shutdown and re set commands. The board's re set re ason is also inc luded in this register . T ab le 5-18 PLD Shut down and R eset C ontrol an d R ...

  • Emerson MVME2500 - page 96

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 96 5.5.16 PLD W atc hdog T imer R efresh R egister The MVME2500 provides a w atchdog time r refresh registe r . CPU_RESE T CPU_HRE SET_REQ_L R eset R eason 1 - R eset is due t o CPU_HRESE T_RE Q_L signal 0 -None WD_TIME OUT W atc hdog Timeout Res et R eason 1 - R eset is due t o ...

  • Emerson MVME2500 - page 97

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 97 5.5.17 PLD W atc hdog Control Register The MVME2500 provides a w atchdog c ontrol register . 5.5.18 PLD W atc hdog T imer Count R egister The MVME2500 provides a w atchdog time r count regist er . T ab le 5-20 PLD Wa tc hdog C ontrol R egister REG PLD W atch Dog Time r Load - ...

  • Emerson MVME2500 - page 98

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 98 5.6 Ex te rnal Timer Regist ers The MVME2500 provides a s et of tick time r registers to acce ss the three extern al timers impleme nted in the timers/registe rs PLD. These regist ers are 32-bit and are word writable . The follo wing sections describe the timer prescale r and ...

  • Emerson MVME2500 - page 99

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 99 5.6.2 Control R egisters T ab le 5-23 Con trol R egiste rs REG Tick Timer 0 Con trol Regist er - 0xFFC80202 Tick Timer 1 Con trol Regist er - 0xFFC80302 Tick Timer 2 Con trol Regist er - 0xFFC80402 B i t 1 5 1 4 1 3 1 2 1 1 1 0 9 8 7654 3210 Fie ld RSVD RSVD RSVD RSV D RSVD IN ...

  • Emerson MVME2500 - page 100

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 100 5.6.3 Compare High and Low W ord Regist ers The tick timer c ounter is c ompared to the Compare R egister . Whe n the values are equal, the tick timer in terrup t is asserted and the ove r flow coun te r increme nts. If the cle ar-on-comp are mode is en able, the c ounter is ...

  • Emerson MVME2500 - page 101

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H) 101 5.6.4 Counter High and Lo w W ord Regist ers When e nabled, the tick timer c ounte r register incr eme nts eve r y microsec ond. Sof t ware ma y read or writ e the coun ter a t any time. T ab le 5-26 C ount er High W ord R egiste rs REG Tick Timer 0 Coun ter V alue High W ord ...

  • Emerson MVME2500 - page 102

    Memory Maps and Registers MVME2500 Installation and Use (6806800L01H ) 102 ...

  • Emerson MVME2500 - page 103

    Chapter 6 MVME2500 Installation and Use (6806800L01H) 103 Boot System 6.1 Overview The MVME2500 use s Das U-Boot, a boot loade r soft ware based on the GNU Public Lic ense . It boots the bl ade and is the first sof t ware t o be execut ed after the syste m is powe red on. Its main functions are:  Initializ e the hardware  Pa ss boot p aramete ...

  • Emerson MVME2500 - page 104

    Boot System MVME2500 Installation and Use (6806800L01H ) 104 U -Boot aborts the boot sequenc e and ente r s int o a comm and line inte r face mode . 6.3 Boot Options 6.3.1 Booting from a Net work In this mode, U-Boot downloads and boo ts the Linu x k ernel from an extern al TF TP ser ve r and mounts a roo t file system loca ted on a net work se r v ...

  • Emerson MVME2500 - page 105

    Boot System MVME2500 Installation and Use (6806800L01H) 105 6.3.2 Booting from an Optional SA T A Drive 1. Mak e sure that the kernel, dtb, and ramdisk are saved in the S A T A drive with ext2 par tition. 2. Con figure U -Boot e nvironment v ariable : setenv File_uImage <kernel_image> setenv File_dtp <kernel dtb> setenv File_ramdisk < ...

  • Emerson MVME2500 - page 106

    Boot System MVME2500 Installation and Use (6806800L01H ) 106 6.3.4 Booting from an SD Card 1. Mak e sure that the kernel, dtb , and ramdisk are sav ed in the SD card with F A T par tition. 2. Con figure the U -Boot e nvironment v ariable : setenv File_uImage <kernel_image> setenv File_dtp <kernel dtb> setenv File_ramdisk <ramdisk> ...

  • Emerson MVME2500 - page 107

    Boot System MVME2500 Installation and Use (6806800L01H) 107 3. TF TP the files from the s er ve r to local memor y , then boo t: run vxboot 6.4 Using the P er sistent Memor y F eature Pe rsistent me mor y means that the RAM's me mor y is not delet ed during a reset. Pow er cycling, or by te mporarily removing the pow er and the n powe ring up ...

  • Emerson MVME2500 - page 108

    Boot System MVME2500 Installation and Use (6806800L01H ) 108 6.5 MVME2500 Specific U-Boot Commands T ab le 6-1 MVME2500 S pecific U-Boot C ommands Command De scription base Print or set addres s offset bdinf o Print board inf o structure boot Boot def ault, i.e ., run 'bootcmd' bootd Boot def ault, i.e ., run 'bootcmd' boote lf ...

  • Emerson MVME2500 - page 109

    Boot System MVME2500 Installation and Use (6806800L01H) 109 help Print online help i2c I2C sub-system iminf o Print he ader inf ormation f or application image imxtrac t Ex tract a part of a multi-image inte rr upts Enable or disable int errupts itest Return true/f alse on intege r compare loadb Load bin ar y file over se rial line (ke rmit mode) l ...

  • Emerson MVME2500 - page 110

    Boot System MVME2500 Installation and Use (6806800L01H ) 110 6.6 Updating U -Boot T o upd ate the U-Boot, plac e the image in the RAM (addres s 0x1000000 in this example) bef ore cop ying it to the SPI fla sh. The follo wing procedure will re place the im age in SPI bank 0: 1. Disable SPI writ e-protect in FPGA register P LD Write Pro tect and I2C ...

  • Emerson MVME2500 - page 111

    Boot System MVME2500 Installation and Use (6806800L01H) 111 sf probe 0 4. Eras e 0x90000 bytes star ting at SPI addres s 0: sf erase 0 0x90000 5. W rite 0x90000 bytes from RAM address 0x1000000 starting at SPI address 0: sf write 0x1000000 0 0x90000 T o re place the image in S PI bank 1, repl ace ste p 2 with Select SPI flash # 1: sf probe 1 ...

  • Emerson MVME2500 - page 112

    Boot System MVME2500 Installation and Use (6806800L01H ) 112 ...

  • Emerson MVME2500 - page 113

    Chapter 7 MVME2500 Installation and Use (6806800L01H) 113 Programming Model 7.1 Overview This chap ter includes addition al pr ogramming inform ation f or the MVME2500. 7.2 R eset Configur ation The MVME2500 suppor ts the pow er -on reset (POR) pin sampling me thod for proc essor reset con figuration. Each op tion and the corr e sponding def ault s ...

  • Emerson MVME2500 - page 114

    Programming Model MVME2500 Installation and Use (6806800L01H ) 114 6 Boot Sequenc e LGPL3/LFWP , L GPL5 11 CFG_BOO T_SEQ[1:0] = BOO T SEQUENCE DISABLED 7 Memor y Debug Confi g DMA2_D ACK0 1 De bug inf ormation from the DDR SDRAM con troller is driv en on the MS PCID and MDV AL signs (default) 8 DDR Debug Confi g DMA2_DDONE0 1 Debug in form ation is ...

  • Emerson MVME2500 - page 115

    Programming Model MVME2500 Installation and Use (6806800L01H) 115 18 ETSEC2 SG MII Mode L GPL1 1 eTSE C2 Ethernet inte r face opera tes in standard paralle l inte r face mode and use s the TSE C_2’pins (default). 19 ETSEC3 SG MMI Mode TSE C_1588_ALARM _OUT2 1 eTSEC3 Ethe rnet inte r face opera tes in standard paralle l inte r face mode and use s ...

  • Emerson MVME2500 - page 116

    Programming Model MVME2500 Installation and Use (6806800L01H ) 116 24 BOO T ROM Location TSE C1_TXD[6:4], TSE C1_TX_ER 011X On-chip boot ROM-SPI con figuration (x=0), SDHC (x=1) 25 Host/Age nt Confi g L WE1/LBS1, LA[18:19] 111 The processor acts as the host/root c omplex for all PCI-E/Serial Rapid IO inte r faces (def ault). 26 I/O Port Select TSEC ...

  • Emerson MVME2500 - page 117

    Programming Model MVME2500 Installation and Use (6806800L01H) 117 7.3 Interrup t Controller The MVME2500 use s the MPC8548E integrated programm able inte rr upt c ontroller (PIC) to man age locally gene rated inte rrupts. Curren tly defined extern al interrupting de vices and inte rr upt a ssignments, along with c orresponding edge/leve ls and pola ...

  • Emerson MVME2500 - page 118

    Programming Model MVME2500 Installation and Use (6806800L01H ) 118 7.4 I2C Bus De vice A ddressing The follo wing table contains the I2C devic es used f or the MVME2500 and its assigned devic e address. 1. This is a dual addres s seri al EEPROM. 2. The RTM Bu s address can be manually c hanged through the S1 S witch on RTM. The def ault switch c on ...

  • Emerson MVME2500 - page 119

    Programming Model MVME2500 Installation and Use (6806800L01H) 119 7.6 Other Sof t ware Consider ations This section provides programming inf ormation in rel ation to various boar d components. 7.6.1 MRAM The MVME2500 provides 512 K b y tes of fa st, non -vola tile storage in the form of Magne toresistiv e Random Acc ess Me mor y (MRAM). The MRAM is ...

  • Emerson MVME2500 - page 120

    Programming Model MVME2500 Installation and Use (6806800L01H ) 120 7.6.4 LBC T iming Par ameters The follo wing table defines the timing parame ters for the devic es on the local bus. T ab le 7-5 LBC Timing Paramet ers 0123456 MRAM UART 0 UART 1 U ART 2 U ART 3 FPGA Timers B C T L D 0000000 C S N T 1111111 A C S 1 01 01 01 01 01 01 0 X A C S 000000 ...

  • Emerson MVME2500 - page 121

    Programming Model MVME2500 Installation and Use (6806800L01H) 121 7.7 Clock Distribution The clock function genera tes and distributes all of the c locks required for system ope ration. The ICS9FG108 is us ed to gene rate all the required PCI-E clocks. The 25 MHz clocks for the Etherne t PHY and SA T A bridge are suppli ed by ICS83905. Most of the ...

  • Emerson MVME2500 - page 122

    Programming Model MVME2500 Installation and Use (6806800L01H ) 122 7.7.1 System Clock The syste m and DDR clock is drive n by ICS840S07I. The following table de fines the clock frequency . BCM54616S SW_25MHZ_CLK 25Mhz ICS83905AG ILF +3.3V XMC CLK_XMC1 100MHz ICS9FG108 DIFF QorIQ P20x0 SD_REF_CLK 100MHz ICS9FG109 DIFF TSI384 CLK_PCIEC1 100MHz ICS9FG ...

  • Emerson MVME2500 - page 123

    Programming Model MVME2500 Installation and Use (6806800L01H) 123 7.7.2 Real Time Clock Input The RT C clock input is driv en by a 1 MHz clock ge nerated b y the FP GA. This provides a fixed clock ref erenc e for the QorIQ P20x0 PIC timers which the so f t ware can u se as a kno wn time ref ere nce . 7.7.3 Local Bus Controller Clock Divisor The loc ...

  • Emerson MVME2500 - page 124

    Programming Model MVME2500 Installation and Use (6806800L01H ) 124 ...

  • Emerson MVME2500 - page 125

    Appendix A MVME2500 Installation and Use (6806800L01H) 125 A R eplacing the Batt er y A .1 R eplacing the Batter y The figure belo w shows the location o f the board batte r y . Figure A-1 Batte r y Loc ation ...

  • Emerson MVME2500 - page 126

    Replacing the Battery MVME2500 Installation and Use (6806800L01H ) 126 The batte r y provides seve n years of d ata rete ntion, summing up all periods of actual da t a use . Emerson the ref ore assume s that there is u sually no need to repl ace the ba ttery exce pt, for example , in case o f long -term s pare par t handling. Board/Syst em D amage ...

  • Emerson MVME2500 - page 127

    Replacing the Battery MVME2500 Installation and Use (6806800L01H) 127 Replacement Procedure T o re place the batte r y , proceed as f ollows: 1. R emo ve the old batt er y . 2. Install the new batt er y with the plu s sign (+) facing up . 3. Dispos e of the old batt er y acc ording to y our country ’s legisla tion and in an en vironmentally safe ...

  • Emerson MVME2500 - page 128

    Replacing the Battery MVME2500 Installation and Use (6806800L01H ) 128 ...

  • Emerson MVME2500 - page 129

    Appendix B MVME2500 Installation and Use (6806800L01H) 129 B R elated Documentation B.1 Emer son Net w ork Po we r - Embedded Computing Documents The publications listed be low are refe renc ed in this manual. Y ou can obtain e lec tronic copies o f Emerson Network Pow er - Embedded Computin g publications by c ontac ting your local Emerson sales o ...

  • Emerson MVME2500 - page 130

    Related Documentation MVME2500 Installation and Use (6806800L01H ) 130 B.2 Manu facturer s ’ Documents For ad ditional inf ormation, ref er to the f ollowing table for m anufac turers ’ data sheets or u ser manu als. As an additional help , a source for the list ed documen t is provided. Pleas e note th at while these sourc es hav e been v erif ...

  • Emerson MVME2500 - page 131

    Related Documentation MVME2500 Installation and Use (6806800L01H) 131 IEEE IEEE 802.3 LAN/MAN CSMA/CD Acces s Method IEEE 802.3-2005 IEEE Stand ard for a C ommon Mezzanine Card (CMC) F amily IEEE Std 1386-2001 IEEE Standar d Physical and Environmen tal Laye rs for PCI Mezzanine Cards (PMC) IEEE St d 1386.1-2001 IEEE Standar d T est Acces s Por t an ...

  • Emerson MVME2500 - page 132

    Related Documentation MVME2500 Installation and Use (6806800L01H ) 132 ...

  • Emerson MVME2500 - page 133

    MVME2500 Installation and Use (6806800L01H) 133 Safe t y Note s This section provides warnings th at precede pot en tially dange rous procedures throughout this manu al. Instruc tions con t ained in the warning s must be f ollowed during all pha ses of opera tion, service, and re pair of this equipment. Y ou should also emplo y all other sa fet y p ...

  • Emerson MVME2500 - page 134

    MVME2500 Installation and Use (6806800L01H) Safety Notes 134 Opera tion of this equipme nt in a reside nti al area is lik ely to cau se harmful in terfe renc e in which case the u ser will be required to c orrec t the inte r fe rence a t his own expens e. C hanges or modifications no t expressly approv ed by Emerson Network Powe r could void the u ...

  • Emerson MVME2500 - page 135

    Safety Notes MVME2500 Installation and Use (6806800L01H) 135 Mak e sure all sof t ware is c omplete ly shut down before re moving powe r from the board or remo ving the board from the c has sis. Product Dam age Only use in jector handles f or board insertion to avoid d amage to the front p anel and/or PCB. Def ormation of the fron t panel can cau s ...

  • Emerson MVME2500 - page 136

    MVME2500 Installation and Use (6806800L01H) Safety Notes 136 Batter y Board/Syst em Dam age Incorrect exch ange of lithium batte ries can result in a h azardou s explosion. When ex changing the on-board lithium batte r y , make sure th at the new and the old batte r y are exac tly the same batte r y models. If the respective ba ttery model is not a ...

  • Emerson MVME2500 - page 137

    MVME2500 Installation and Use (6806800L01H) 137 Sicherheitshinw eise Dieses K apitel e nthält Hinweise , die pote ntiell ge fährlichen Pro zedure n innerhalb diese s Handbuchs v orrangestellt sind. Be achte n Sie unbedingt in allen Phas en des Be trieb s, der W ar tung und der Re paratur des Syste ms die Anweisungen, die dies en Hinwe isen en tha ...

  • Emerson MVME2500 - page 138

    MVME2500 Installation and Use (6806800L01H) Sicherheitshinweise 138 EMV Da s Produkt wurde in einem Eme r son S t andar dsystem ge testet. Es erfüllt die für digitale Gerät e der Kla sse A gültigen Gre nzwe r te in eine m solchen Syste m gemäß den FCC -Richtlinien Abschnitt 15 bzw . EN 55022 Kla sse A . Diese Gre nzwerte sollen e inen ange me ...

  • Emerson MVME2500 - page 139

    Sicherheitshinweise MVME2500 Installation and Use (6806800L01H) 139 Besc hädigung von Sch altkreisen Elektro statische Entl adung und unsachgemäße r Ein - und Au sbau des Produktes kann Schaltkre ise beschädigen ode r ihre Lebensd auer verkürze n. Bev or Sie das Produkt oder elektr onische K omponenten berühren, vergewissern Sie sich, daß Si ...

  • Emerson MVME2500 - page 140

    MVME2500 Installation and Use (6806800L01H) Sicherheitshinweise 140 Kabel und S teck er Besc hädigung des Produkte s Bei de n RJ -45-Steck ern, die sich an de m Produkt befinde n, hande lt es sich e nt weder um T wisted-Pair -Etherne t (TPE) oder um E1/T1/J1-S tecke r . Beachte n Sie, da ss ein ve r sehe ntliches Anschlie ßen eine r E1/T1/J1-Leit ...

  • Emerson MVME2500 - page 141

    Sicherheitshinweise MVME2500 Installation and Use (6806800L01H) 141 Datenver lus t W enn die Ba tterie we nig oder unzure iche nd mit Spannung ve r sorgt wir d, wird der RT C initialisie r t. T ausche n Sie die Batterie aus, be vor sie ben Jahre ta tsächliche r Nutzung ve rgangen sind. Schäde n an der Platine ode r dem Batte riehalt er W enn Sie ...

  • Emerson MVME2500 - page 142

    MVME2500 Installation and Use (6806800L01H) Sicherheitshinweise 142 ...

  • Emerson MVME2500 - page 143

    MVME2500 Installation and Use (6806800L01H) 143 A abbreviations 13 accessories 30 B block diagram 61 board accessories 23 board configuration 29 C chipset 61 conventions 15 D disposal 26 disposal of product 21 E environmental requirements 27 I installating and removing the board 32 installation 31 M memory system memory 65 P PMC 31 PMC/PrPMC 31 pro ...

  • Emerson MVME2500 - page 144

    Index MVME2500 Installation and Use (6806800L01H) 144 ...

  • Emerson MVME2500 - page 145

    ...

  • Emerson MVME2500 - page 146

    HOW TO R EACH LITERATURE AND T ECHNICAL SUPPORT: For lite rature, training, and tec hni cal as sistance and suppor t programs, visit www .emersonnetworkpower .c om/embeddedc omputing Emerson, Busine ss-Critical Continuity , Emerson Network Powe r and the Emerson Network Powe r logo are trademarks and se r vice mark s of Eme r son Electric Co. All o ...

Manufacturer Emerson Category Computer Accessories

Documents that we receive from a manufacturer of a Emerson MVME2500 can be divided into several groups. They are, among others:
- Emerson technical drawings
- MVME2500 manuals
- Emerson product data sheets
- information booklets
- or energy labels Emerson MVME2500
All of them are important, but the most important information from the point of view of use of the device are in the user manual Emerson MVME2500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Emerson MVME2500, service manual, brief instructions and user manuals Emerson MVME2500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Emerson MVME2500.

Similar manuals

A complete manual for the device Emerson MVME2500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Emerson MVME2500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Emerson MVME2500.

A complete Emerson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Emerson MVME2500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Emerson MVME2500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Emerson MVME2500, that we can find in the current document
3. Tips how to use the basic functions of the device Emerson MVME2500 - which should help us in our first steps of using Emerson MVME2500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Emerson MVME2500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Emerson MVME2500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Emerson MVME2500?

Use the form below

If you did not solve your problem by using a manual Emerson MVME2500, ask a question using the form below. If a user had a similar problem with Emerson MVME2500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)