Manual Intel IP Gateway (Global Call) for Linux and Windows

56 pages 0.17 mb
Download

Go to site of 56

Summary
  • Intel IP Gateway (Global Call) for Linux and Windows - page 1

    IP Gateway (Global Call) Demo Guide for Linux and Windows Copyright © 2002-2005 Intel Corporation 05-1662-005 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 2

    COPYRIGHT NOTICE INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 3

    iii Table of Contents 1. About This Guide ............................................................................................ 1 1.1. Purpose ........................................................................................................... 1 1.2. Intended Audience ................................................................... ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 4

    IP Gateway (Global Call) Demo Guide for Linux and Windows iv 6.5.1. Handling Keyboard Input Events ........................................................ 29 6.5.2. Handling SRL Events .......................................................................... 29 6.5.3. Handling Application Exit Events .............................................. ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 5

    v List of Tables Table 2. Command Line Switches ...................................................................... 18 Table 3. Runtime Keyboard Commands ............................................................. 20 Table 4. Source Files Used by the IP Gateway (Global Call) Demo .................. 21 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 6

    IP Gateway (Global Call) Demo Guide for Linux and Windows vi ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 7

    vii List of Figures Figure 1. Hardware Configuration with Onboard NIC and PSTN Front End ....... 7 Figure 2. Hardware Configuration with Onboard NIC and separate PSTN board .............................................................................................................. 8 Figure 3. Typical Topology ..................................... ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 8

    IP Gateway (Global Call) Demo Guide for Linux and Windows viii ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 9

    1 1. About This Guide This section describes the purpose of this guide, the intended audience, and references to other documents that may be useful to the user. 1.1. Purpose This guide describes the operation of the IP Gateway (Global Call) demo. 1.2. Intended Audience This guide is intended for application developers who will be developing a PSTN- ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 10

    IP Gateway (Global Call) Demo Guide for Linux and Windows 2 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 11

    3 2. Demo Description 2.1. About the Demo The IP Gateway (Global Call) demo is a host-based application that demonstrates using the Global Call API to build a PSTN − IP gateway. The demo source code can be used as sample code for those who want to begin developing an application from a working application. The demo is not designed to implement a ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 12

    IP Gateway (Global Call) Demo Guide for Linux and Windows 4 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 13

    5 3. System Requirements This chapter discusses the system requirement for running the IP Gateway (Global Call) demo. It contains the following topics: • Hardware Requirements • Software Requirements 3.1. Hardware Requirements To run the IP Gateway (Global Call) demo, you need: • One of the following: • Intel NetStructure® DM/IP Series boa ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 14

    IP Gateway (Global Call) Demo Guide for Linux and Windows 6 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 15

    7 4. Preparing to Run the Demo This chapter discusses how to prepare to run the IP Gateway (Global Call) demo. It provides information about the following topics: • Connecting to External Equipment • Editing Configuration Files 4.1. Connecting to External Equipment There are two possible hardware configurations for the IP Gateway (Global Call) ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 16

    IP Gateway (Global Call) Demo Guide for Linux and Windows 8 Intern et/ Intr anet li ne Intel NetStructure® IPT board CTbus cable PSTN line Intel NetStructure® DM/V-A series board Figure 2. Hardware Configuration with Onboard NIC and separate PSTN board The IP Gateway (Global Call) demo allows you to connect to gateways on an IP network and establ ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 17

    4. Preparing to Run the Demo 9 IP Netw ork H.323 Terminal IP Gateway Telephone PBX IP Gateway Telephone PBX Fax Fax Figure 3. Typical Topology 4.2. Editing Configuration Files This section discusses how to configure the demo for your system. It contains the following topics: • Configuration file location • Editing the gateway_r4.cfg File 4.2.1. ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 18

    IP Gateway (Global Call) Demo Guide for Linux and Windows 10 4.2.2. Editing the gateway_r4.cfg File Below is an example of the gateway_r4.cfg file. Update the following information: ipProtocol The IP Protocol used for opening the IP Line devices, values: H323, SIP, both Channel Channels defined by this section of the file - may be individual channe ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 19

    4. Preparing to Run the Demo 11 • CoderFramesPerPkt - frames per packet for the selected coder • CoderVAD - Voice Activity Detection on/off AudioTxCodecs Capability for transmit audio codecs. See AudioRxCodecs for a complete description. DataCodecs Capability for fax codecs. The demo currently support T38 only. MediaAlarmLostPackets Indicates t ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 20

    IP Gateway (Global Call) Demo Guide for Linux and Windows 12 UII User Input Indication string to send NonStdParm Non-standard parameter data to send NonStdCmd Non-standard command string to send ObjId Object ID Q931Facility Facility data to send on the Q.931 channel DTMF DTMF mode. Possible options: OutOfBand, inband, rfc2833 enableRegestration Reg ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 21

    4. Preparing to Run the Demo 13 The following is an example of a configuration file. ######################################################################################## # Telephony Protocol : # For ANAPI(Analog Front End) use the root file name of the analog protocol file for your country or telephone network) # For ICAPI (Digital Front End) u ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 22

    IP Gateway (Global Call) Demo Guide for Linux and Windows 14 DTMFmode = OutOfBand AudioRxCodecs { CoderType = g711Mulaw CoderFramesPerPkt = 30 CoderVAD = 0 } AudioTxCodecs { CoderType = g711Mulaw CoderFramesPerPkt = 30 CoderVAD = 0 } DataCodecs { CoderType = t38 } MediaAlarmLostPackets { Threshold = 20 # Threshold value DebounceOn = 10000 # Thresho ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 23

    4. Preparing to Run the Demo 15 # use 0.0.0.0 as the default address for descovering the GK regServerAddress = 10.242.214.45 NonStdRasCmd = NSC_Chan1 RasObjId = Intel # possible alias types: 1 = string, 2 = IP address, 3 = H323 ID, 4 = phone, 5 = URL, 6 = EMail Alias = 1 { AliasType = 3 AliasName = intel } Alias = 2 { AliasType = 4 AliasName = 1111 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 24

    ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 25

    17 5. Running the Demo This chapter discusses how to run the IP Gateway (Global Call) demo. It contains the following topics: • Starting the Demo • Demo Options • Using the Demo • Stopping the Demo 5.1. Starting the Demo Windows From a command prompt, change directories to: $(INTEL_DIALOGIC_DIR)samplesipt_demosgateway_r4 Release Type g ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 26

    IP Gateway (Global Call) Demo Guide for Linux and Windows 18 Table 1. Command Line Switches Switch Action Default -c < filename > Configuration file name gateway_r4.cfg -d Sets Debug Level (0-4): 0-FATAL: used when one or more channels are deadlocked. 1-ERROR: used when the application receives a failure which doesn’t cause the channel to b ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 27

    5. Running the Demo 19 Switch Action Default -l <n,…> Printouts will be printed into channel log files. If ‘all’ follows the –l, log files will be created for all available channels. If a list of channels in the following format: C1-C2, C3-C4, C5 (e.g., 1- 10,112-150,314) follows the –l, log files are created for the channel ranges ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 28

    IP Gateway (Global Call) Demo Guide for Linux and Windows 20 5.3. Using the Demo The demo always waits for input from the keyboard. While the demo is running, you can enter any of the following commands: Table 2. Runtime Keyboard Commands Command Function c or C Print channel information d<n> or D<n> Change debug level during runtime f ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 29

    21 6. Demo Details This chapter discusses the IP Gateway (Global Call) demo in more detail. It contains the following topics: • Files Used by the Demo • Handling an Incoming Call • Programming Model • Initializations • Event Handling • Demo State Machine 6.1. Files Used by the Demo 6.1.1. Demo Source Files In Windows the following files ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 30

    IP Gateway (Global Call) Demo Guide for Linux and Windows 22 Filename Description OS gatepars.c The demo configuration file parsing functions Both gatepars.h Function prototype for gatepars.c Both gatepstn.c PSTN-specific functions Both gatepstn.h Function prototype for gatepstn.c Both gatestate.c State machine functions Both gatestate.h Function p ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 31

    6. Demo Details 23 Filename Description OS register.h Function prototype for register.c Both Release gateway_r4.cfg Demo configuration file Windows Release/ gateway_r4.cfg Demo configuration file Linux Release gateway_r4.exe Executable Windows Release/ gateway_r4.exe Executable Linux 6.1.2. Utility Files In Windows the following files are located ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 32

    IP Gateway (Global Call) Demo Guide for Linux and Windows 24 Filename Description OS Releaseutil.lib Compiled Utility library Windows 6.1.3. PDL Files In Windows the following files are located in $(INTEL_DIALOGIC_DIR)samplesipt_demosShared In Linux the following files are located in $(INTEL_DIALOGIC_DIR)/ipt_demos/Shared Filename Description OS ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 33

    6. Demo Details 25 Filename Description OS /pdl_linux/pdl.c Platform dependency functions Linux /pdl_linux/pdl.h Function prototype for pdl.c Linux /pdl_linux/ pdl_linux_version.c PDL version information Linux 6.2. Handling an Incoming Call This section discusses how the demo application handles incoming calls. It contains the following topics: • ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 34

    IP Gateway (Global Call) Demo Guide for Linux and Windows 26 Once the destination gateway has answered the H.323 call, the IP Gateway (Global Call) demo connects the PSTN call to the IP call. An audio path is now established between the PSTN call and the destination IP station. For more details see section 6.5. Event Mechanism . 6.2.3. Handling an ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 35

    6. Demo Details 27 The threads are created as follows: • The first (main) thread is created by the demo application to get the keyboard input. • The second thread is an SRL thread, created as a result of the demo application calling sr_enblhdlr( ) in Windows. In Linux, the thread must be explicitly created. All Global Call events are received t ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 36

    IP Gateway (Global Call) Demo Guide for Linux and Windows 28 • Calculates the logical board and channel and saves them into Session.pstnParams • Closes the board, by calling dx_Close( ) or dt_Close( ) . 9. Call ipGetChannels( ) which checks how many available IP channels there are by doing the following: • Gets number of IP boards from #defin ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 37

    6. Demo Details 29 • Calls gc_OpenEx( ) which opens all IP devices, returns the IP LineDevH , and saves it in Session.ipParams • Saves the channel number in the global array HandleToChannel[ ] according to the LineDevH handle 13. The application main() function calls waitForKey( ) , to receive keyboard input. 6.5. Event Mechanism The IP Gateway ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 38

    IP Gateway (Global Call) Demo Guide for Linux and Windows 30 3. Otherwise, the application calls gc_GetUsrAttr( ) and then calls either ipGetEvent( ) to process the IP event, or pstnGetEvent( ) to process the PSTN event. 6.5.3. Handling Application Exit Events Normal application exit events don’t enter the SRL. The main() function calls PDLSetApp ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 39

    6. Demo Details 31 GATE_NULL IP_CONNEC TED GATE_DROP IP_OFFERED GATE_CONNECTED IP: GCEV _EXTENSION IP: gc_SetUserInfo( ) IP: gc_AnswerCall( ) IP: GCEV_ANSW ERED IP: gc_Listen( ) PSTN: gc_MakeCall( ) IP, PSTN: GCEV_DISCONNECTED pstnUnListen( ) IP, PSTN: gc_DropCa ll( ) PSTN: GCEV_CONNECTED PSTN: ag_Listen( ) or dt_Listen( ) IP, PSTN: GCEV_DROPCALL I ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 40

    IP Gateway (Global Call) Demo Guide for Linux and Windows 32 3. In IP_CONNECTED, when the application receives GCEV_CONNECTED from the PSTN side, the application calls pstnListen( ) , which in turn calls ag_Listen( ) or dt_Listen( ) ( ag for analog; dt for digital) to tell the PSTN line device to listen to the IP time slot The state transitions to ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 41

    6. Demo Details 33 2. In PSTN_OFFERED the application waits for GCEV_CONNECTED from the IP side. When the application receives GCEV_CONNECTED it calls: • gc_Extension( ) to get the call information from the IP side • gc_Listen( ) to tell the IP line device to listen to the PSTN time slot • pstnListen( ) which calls ag_Listen( ) or dt_Listen( ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 42

    IP Gateway (Global Call) Demo Guide for Linux and Windows 34 2. When the application receives GCEV_DROPCALL from the IP side, it calls gc_Extension( ) to get the RTCP information. When the application receives GCEV_EXTENSION the application calls gc_ReleaseCall( ) and the state transitions to GATE_NULL. 6.6.4. Glare Conditions Glare conditions occu ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 43

    35 Appendix A Log File of IP Call Establishment DATE: 08/16/01 TIME: 10:49:20 TRACE: File: gatepstn.c Line: 189 End of pstnOpenFrontEnd function on channel 14 DATE: 08/16/01 TIME: 10:49:21 TRACE: File: gateip.c Line: 99 Start ipOpenDevices function on channel 14 DATE: 08/16/01 TIME: 10:49:21 TRACE: File: gateip.c Line: 116 End of ipOpenDevices func ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 44

    IP Gateway (Global Call) Demo Guide for Linux and Windows 36 TRACE: File: gateip.c Line: 466 End of ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:53:00 TRACE: File: gateip.c Line: 385 In ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:53:00 TRACE: File: gateip.c Line: 227 Start OnExtension function on channel 14 DATE: 08/16/01 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 45

    Appendix A 37 TRACE: File: gateip.c Line: 466 End of ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:53:01 TRACE: File: gateip.c Line: 385 In ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:53:01 TRACE: File: gatestate.c Line: 357 In IP_OFFERED State on channel (0xe) got event GCEV_ANSWERED (0x802) from IP DATE: 08/16/01 TIME: 1 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 46

    IP Gateway (Global Call) Demo Guide for Linux and Windows 38 TRACE: File: gatestate.c Line: 841 Drop call on channel 14 DATE: 08/16/01 TIME: 10:54:24 TRACE: File: gateip.c Line: 466 End of ipGetEvent function on channel 14 DATE: 08/16/01 TIME: 10:54:24 TRACE: File: gatepstn.c Line: 369 In pstnGetEvent function on channel 14 DATE: 08/16/01 TIME: 10: ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 47

    39 Appendix B Log File of PSTN Call Establishment DATE: 08/16/01 TIME: 10:57:55 TRACE: File: gatepstn.c Line: 189 End of pstnOpenFrontEnd function on channel 10 DATE: 08/16/01 TIME: 10:57:56 TRACE: File: gateip.c Line: 99 Start ipOpenDevices function on channel 10 DATE: 08/16/01 TIME: 10:57:56 TRACE: File: gateip.c Line: 116 End of ipOpenDevices fu ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 48

    IP Gateway (Global Call) Demo Guide for Linux and Windows 40 TRACE: File: gateip.c Line: 140 Start ipMakeCall function on channel 10 DATE: 08/16/01 TIME: 10:58:37 TRACE: File: gateip.c Line: 205 End of ipMakeCall function on channel 10 DATE: 08/16/01 TIME: 10:58:37 TRACE: File: gatepstn.c Line: 369 In pstnGetEvent function on channel 10 DATE: 08/16 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 49

    Appendix B 41 DATE: 08/16/01 TIME: 10:58:38 TRACE: File: gateip.c Line: 385 In ipGetEvent function on channel 10 DATE: 08/16/01 TIME: 10:58:38 TRACE: File: gateip.c Line: 227 Start OnExtension function on channel 10 DATE: 08/16/01 TIME: 10:58:38 INFO: File: gateip.c Line: 250 Got extension data display: target DATE: 08/16/01 TIME: 10:58:38 TRACE: F ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 50

    IP Gateway (Global Call) Demo Guide for Linux and Windows 42 DATE: 08/16/01 TIME: 11:00:03 TRACE: File: gatepstn.c Line: 348 End of pstnUnListen function on channel 10 DATE: 08/16/01 TIME: 11:00:03 TRACE: File: gatestate.c Line: 841 Drop call on channel 10 DATE: 08/16/01 TIME: 11:00:03 TRACE: File: gatepstn.c Line: 369 In pstnGetEvent function on c ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 51

    Appendix B 43 DATE: 08/16/01 TIME: 11:00:05 TRACE: File: gateip.c Line: 466 End of ipGetEvent function on channel 10 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 52

    IP Gateway (Global Call) Demo Guide for Linux and Windows 44 ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 53

    45 Index A ag_Listen( ), 32, 33 ag_Unlisten( ), 33 APPMAIN.C, 29 ATDV_SUBDEVS( ), 27 C Call connection, 3 Call establishment, 25 Call progress tones, 26 Call state GATE_CONNECTED, 32, 33 GATE_DROP, 33 GATE_NULL, 30 IP_CONNECTED, 31, 33 IP_DROP, 33 IP_OFFERED, 31, 33 PSTN_OFFERED, 32 Call Teardown, 33 checkArg( ), 27 Command Line Switches, 18 Config ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 54

    IP Gateway (Global Call) Demo Guide for Linux and Windows 46 gc_DropCall( ), 33 gc_Extension( ), 31, 33 gc_GetNetworkH( ), 28 gc_GetVoiceH( ), 28 gc_GetXmitSlot(), 30 gc_Listen( ), 31, 33 gc_MakeCall( ), 31, 32 gc_Open( ), 27 gc_OpenEx( ), 28 gc_OpenEx( ) , 28 gc_ReleaseCall( ), 33 gc_SetUserInfo( ), 31 gc_Start( ), 27 gc_Unlisten( ), 33 GCEV_ANSWE ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 55

    Index 47 N NetwH, 28 P PDL, 3 pdl.c, 24 PDLsr_enbhdlr( ), 27 PDLsr_getboardcnt( ), 27 Platform Dependency Library, 3 PSTN State Diagram, 32 PSTN channel, 3 PSTN, Log File, 39 PSTN_OFFERED, 32 pstnGetVOXChannels( ), 27 pstnOpenFrontEnd( ), 28 R remote phone number, 25 Routing, 25 S Session.ipParams, 28 Session.pstnParams, 27, 28 sr_enbhdlr( ), 29 SR ...

  • Intel IP Gateway (Global Call) for Linux and Windows - page 56

    48 ...

Manufacturer Intel Category Network Hardware

Documents that we receive from a manufacturer of a Intel IP Gateway (Global Call) for Linux and Windows can be divided into several groups. They are, among others:
- Intel technical drawings
- IP Gateway (Global Call) for Linux and Windows manuals
- Intel product data sheets
- information booklets
- or energy labels Intel IP Gateway (Global Call) for Linux and Windows
All of them are important, but the most important information from the point of view of use of the device are in the user manual Intel IP Gateway (Global Call) for Linux and Windows.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Intel IP Gateway (Global Call) for Linux and Windows, service manual, brief instructions and user manuals Intel IP Gateway (Global Call) for Linux and Windows. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Intel IP Gateway (Global Call) for Linux and Windows.

A complete manual for the device Intel IP Gateway (Global Call) for Linux and Windows, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Intel IP Gateway (Global Call) for Linux and Windows by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Intel IP Gateway (Global Call) for Linux and Windows.

A complete Intel manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Intel IP Gateway (Global Call) for Linux and Windows - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Intel IP Gateway (Global Call) for Linux and Windows, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Intel IP Gateway (Global Call) for Linux and Windows, that we can find in the current document
3. Tips how to use the basic functions of the device Intel IP Gateway (Global Call) for Linux and Windows - which should help us in our first steps of using Intel IP Gateway (Global Call) for Linux and Windows
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Intel IP Gateway (Global Call) for Linux and Windows
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Intel IP Gateway (Global Call) for Linux and Windows in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Intel IP Gateway (Global Call) for Linux and Windows?

Use the form below

If you did not solve your problem by using a manual Intel IP Gateway (Global Call) for Linux and Windows, ask a question using the form below. If a user had a similar problem with Intel IP Gateway (Global Call) for Linux and Windows it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)