Manual Ultra electronic Sprinter

8 pages 0.44 mb
Download

Go to site of 8

Summary
  • Ultra electronic Sprinter - page 1

    3461/07/01 ISSUE 2 PRINTHEAD INSTALLATION & COMMISSIONING SPEC. DCR No. 26106 I MAGICARD PRINTER INSTRUCTIONS FOR REPLACEMENT OF PRINTHEAD AND PRINTHEAD ASSEMBLIES WARNIN G - The Magicard colour printer contai ns hazardous voltages. CAUTI ON - The following procedures involve contact with Electrostatic Sensitive Devices. All Precautions for han ...

  • Ultra electronic Sprinter - page 2

    3461/07/01 ISSUE 2 PRINTHEAD INSTALLATION & COMMISSIONING SPEC. DCR No. 26106 II 1. (a) Removing the cover Magicard 300 and Sprinter models. (1) Set the printer On/Off switch to off(0) and isolate from the mains supply. Remove the card cassette and Dye-Film from the printer. (2) Position the printe r on its side with the rear of the pr inter fa ...

  • Ultra electronic Sprinter - page 3

    3461/07/01 ISSUE 2 PRINTHEAD INSTALLATION & COMMISSIONING SPEC. DCR No. 26106 III 1. (b) Removing the cover Magicard Turbo models. (1) Set the printer On/ Off switch to Off(O) and isolate from the mains supply. Rem ove the card cassette and the Dy e-Film from the printer. (2) Position the printer upside down with the rear of the printer facin g ...

  • Ultra electronic Sprinter - page 4

    3461/07/01 ISSUE 2 PRINTHEAD INSTALLATION & COMMISSIONING SPEC. DCR No. 26106 IV 2. Removing old printhead/assembly (1) Remove the dy e-film and dye-film carrier from the printer. (2) If a tye-wrap is fitted to the grey ribbon cable plug on the back of the printhead, cut this tye-wrap taking great care not to cut the ribbon cable itself. (3) Di ...

  • Ultra electronic Sprinter - page 5

    3461/07/01 ISSUE 2 PRINTHEAD INSTALLATION & COMMISSIONING SPEC. DCR No. 26106 V 3. Fitting the new printhead to the heatsink assembly (Magicard Dealers Only) CAUTION - The following procedures involve contact with the new printhead, all precautions for handling Electrostatic Sensit ive Devices sh ould be follow ed at all times, including the us ...

  • Ultra electronic Sprinter - page 6

    3461/07/01 ISSUE 2 PRINTHEAD INSTALLATION & COMMISSIONING SPEC. DCR No. 26106 VI (3) Check that the springs at the back of the pr inthe a d asse mbly are neat ly compressed and are not bulging outwards or inwards. If t hey are bulging the assembly will ha ve to be removed and refitted again until they remain neatly compressed. (4) If a head bar ...

  • Ultra electronic Sprinter - page 7

    3461/07/01 ISSUE 2 PRINTHEAD INSTALLATION & COMMISSIONING SPEC. DCR No. 26106 VII (4) The printhead angle has been f actory set. In order to ensure that it is still correct, compare the test card with th e images on the back page of this docu ment. N.B. If your test card shows a completely different test image from those on the back page, you w ...

  • Ultra electronic Sprinter - page 8

    3461/07/01 ISSUE 2 PRINTHEAD INSTALLATION & COMMISSIONING SPEC. DCR No. 26106 VIII 7. And finally..... If your new thermal printhead fails to produce a good test image after following the above steps t hen please contact your suppli er. Too Positive Dark patches stressing out from the rear edge of the green square (watermarking). These patches ...

Manufacturer Ultra electronic Category Printer

Documents that we receive from a manufacturer of a Ultra electronic Sprinter can be divided into several groups. They are, among others:
- Ultra electronic technical drawings
- Sprinter manuals
- Ultra electronic product data sheets
- information booklets
- or energy labels Ultra electronic Sprinter
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ultra electronic Sprinter.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ultra electronic Sprinter, service manual, brief instructions and user manuals Ultra electronic Sprinter. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ultra electronic Sprinter.

A complete manual for the device Ultra electronic Sprinter, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ultra electronic Sprinter by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ultra electronic Sprinter.

A complete Ultra electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ultra electronic Sprinter - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ultra electronic Sprinter, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ultra electronic Sprinter, that we can find in the current document
3. Tips how to use the basic functions of the device Ultra electronic Sprinter - which should help us in our first steps of using Ultra electronic Sprinter
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ultra electronic Sprinter
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ultra electronic Sprinter in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ultra electronic Sprinter?

Use the form below

If you did not solve your problem by using a manual Ultra electronic Sprinter, ask a question using the form below. If a user had a similar problem with Ultra electronic Sprinter it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)