-
Korg MR-2000S - page 1
Owner’ s Manual E E Owner’ s Manual 4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan 2008 KORG INC. 2009 AH Printed in Japan IMPORTANT NOTICE TO CONSUMERS This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this produ ...
-
Korg MR-2000S - page 2
Page 2 IMPOR T ANT SAFETY INSTR UCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Mains powered apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the appar ...
-
Korg MR-2000S - page 3
3 Contents Introduction ................................. 4 Features ............................................. 4 Connection example ......................... 4 Parts of the MR-2000S ...................... 5 Front panel .................................................5 Rear panel .................................................. 7 Screens and ...
-
Korg MR-2000S - page 4
4 Intr oduction Thank you for purchasing the Kor g MR-2000S 1-bit studio recor der . In order to take full advantage of your new equipment, please read this manual car efully and use the product as dir ected. When you've read the manual, keep it safe for future r eference. Features The MR-2000S is an ultra-high-quality recor der that can recor ...
-
Korg MR-2000S - page 5
5 Pa r ts of the MR-2000S Fr ont panel 1. Power button, power LED This turns the MR-2000S on or off (standby). The power LED will light-up gr een when on, and red when off (standby). If you disconnect the power cable, the power will be completely off and the power LED will go dark. When you re-connect the power cable, it will take appr oximately on ...
-
Korg MR-2000S - page 6
6 9. Display button When the home screen is shown in the display , pressing this button will switch the content shown in the counter display area ( → p.17). 10. Dial Use this dial to select projects ( → p.10) or files, to select parameters in various screens, and to specify values. In recor d-ready mode, this dial adjusts the level. 11 . Stop ...
-
Korg MR-2000S - page 7
7 Rear panel 1. AC connector Connect the power supply cable (included) here. 2. USB connector This lets you use a USB cable to connect the MR-2000S to your computer . 3. WORD CLOCK OUT jack This jack outputs the same synchronization wor d clock as the project ( → p.10) or file. When operating in 1-bit format, this will output 44.1 kHz. 4. WORD C ...
-
Korg MR-2000S - page 8
8 Screens and operations Home screen and menu list (MENU) screen When you power-on the MR-2000S, the display will show the level meter scr een. While the display is showing the home screen, pr essing the menu button will show the menu list (MENU) screen which lets you pr oceed to various screens r elated to settings as well as informational screens ...
-
Korg MR-2000S - page 9
9 Basic operation 1. P o wer and usage Plug the power cable into an AC outlet. Connect the power cable to the AC connector on the back of the MR-2000S. When you connect the power cable, the MR-2000S will enter the Off (Standby) status in appr oximately one second, and the power LED will light-up red. Y ou must use only the included power cable. Usi ...
-
Korg MR-2000S - page 10
10 4. Playing bac k the demo pr oject The MR-2000S contains a high-quality demo project that was r ecorded in DFF (DSDIFF) format. Her e's how to play back this project. When the MR-2000S is shipped from the factory , the clock source ( → p.29) is set to Internal. What is a project? When you recor d on the MR-2000S, two files are cr eated; ...
-
Korg MR-2000S - page 11
11 5. The home screen When you turn on the power , the home screen is shown in the display . When the menu list (MENU) screen is shown, you can also access the level meter screen by pr essing the menu button. This screen shows information such as the MR-2000S's operating status and r ecording/playback format. Calendar indicator This shows the ...
-
Korg MR-2000S - page 12
12 Order / total n umber in folder This shows the order of the pr ojects/files within the specified folder , as well as the total number of projects/files in that folder . Project/file f ormat This shows the format of the selected project/file ( → p.28). Record/edit calendar indicator This shows the date and time at which the selected projec ...
-
Korg MR-2000S - page 13
13 Selecting the input sour ce Here's how to select the input sour ce that you want to use. The audio signal from the input jack that you specify here will be the audio that is input during r ecord-r eady mode or while recording. W ith the factory settings, the clock sour ce ( → p.29) is set to Internal. An error will occur if you attempt to ...
-
Korg MR-2000S - page 14
14 2. Use the dial to select the Project T ype, and press the enter button to confirm. A check mark will appear in the check box for the project type you selected and confirmed. Y ou can choose from W A V (BWF), DFF , DSF , and WSD. For details on each type, please r efer to "Project recor ding format (New Project T ype)" (p.28). 3. If ...
-
Korg MR-2000S - page 15
15 4. Use the dial to select the desired gain value, and press the enter button to confirm. The selection icon will change from " " to " ". Perform these steps for the left and right channels. Adjust the level so that the signal does not exceed the "0" marking. When you've finished setting the input volume, pres ...
-
Korg MR-2000S - page 16
16 7. Other playbac k/editing operations Selecting the pr oject/file to play Use the dial to select (or choose from a list) the pr oject/file that you want to play . When you turn on the power , the most recently selected project/file will be selected. The order of the pr oject/files The order of the pr ojects/files in the folder on the librar ...
-
Korg MR-2000S - page 17
17 4. In the project select screen, use the dial to select a project, and press the enter button to confirm. The home screen showing the newly selected pr oject name will appear . When the display shows the home screen, you can use a shortcut to access the selection scr een for the selected project/file (step 4); simply hold down the menu button ...
-
Korg MR-2000S - page 18
18 Alternatively , you can press the menu button, and use the dial to select "PEAK HOLD" in the menu list (MENU) screen, and then pr ess the enter button to confirm. 2. T urn the dial to select "Meter ," and press the enter button to confirm. The selection icon will change from " " to " ," and the hold time ...
-
Korg MR-2000S - page 19
19 6. When you've finished making settings, use the dial to select "Set" and press the enter button to con- firm. Y ou will return to the system setting (SYSTEM) scr een. If the power cable is left disconnected, the internal clock will stop operating after approximately one week. If you've left the power cable disconnected for ...
-
Korg MR-2000S - page 20
20 Pr otecting a project Here's how to pr otect a project. If you edit the mark settings of a pr oject that is protected, these settings will r evert to their original state when you select another pr oject or turn off the power . A protected pr oject is indicated by a protect icon displayed in the pr oject/file information field (the top li ...
-
Korg MR-2000S - page 21
21 Viewing details about the pr oject/file Here's how you can view detailed information about a pr oject/file. Y ou can view the audio format, song length, artist, title, date and time, and file size. 1. Select and confirm the project/file whose details you want to view . Refer to "Selecting a project/file to edit" on page 17. ...
-
Korg MR-2000S - page 22
22 Viewing the mark list Here's how to view the list showing the marks in a pr oject in the order of their time location. 1. Select and confirm the project/file whose marks you want to view . Refer to "Selecting a project/file to edit" on page 17. 2. The project/file edit screen will appear , with the name of the selected file i ...
-
Korg MR-2000S - page 23
23 2. Use the dial to select the item that you want to edit, and press the enter button to confirm. Changing the time locations of the marks Y ou can register marks in any position of the W A V , DFF or WSD project, but for the DSF pr oject, only the 1 1.6 ms (Fs=2.8 MHz) or lar ger size mark can be registered by a unit of 5.8 ms (Fs=5.6 MHz). Whe ...
-
Korg MR-2000S - page 24
24 Deleting all marks (Delete All Mark) 1. When you use the dial to select "Delete All Mark" and press the enter button to confirm, a dialog screen will ask you to confirm the deletion. 2. Use the dial to select [Y es] and press the enter button to confirm. If you decide not to delete the marks, use the dial to select [No] and press th ...
-
Korg MR-2000S - page 25
25 Other functions Pla y mode The MR-2000S provides three play modes, as well as auto pause and repeat play settings. To select these modes, use "PLA Y MODE" in the menu list (MENU) screen. The icon for the selected settings will appear in the home screen (p.1 1). Single (play only one pr oject/file): (folder) / (play list) In this mode, ...
-
Korg MR-2000S - page 26
26 Viewing a pla y list Here's how to view the contents of a play list. 1. Press the menu button, then in the menu list (MENU) screen, use the dial to select "LIBRARY" and press the enter button to confirm. The library select (LIBRARY) screen will appear . MR Project: This library contains projects recorded on the MR-2000S. Audio: T ...
-
Korg MR-2000S - page 27
27 Remove fr om List Here's how to remove the selected project/file fr om the play list. This will not delete the project/file itself. If you later decide to add the project/file to the play list, you can use the Add to Play List operation to do so. 1. In the play list (PLA Y LIST) screen, use the dial to select the project/file that you w ...
-
Korg MR-2000S - page 28
28 Recor d mode Here you can adjust various settings related to recording. Press the menu button, and in the menu list (MENU) screen, use the dial to select "REC MODE" and then press the enter button to confirm. Y ou can adjust the following settings fr om the recor d mode (REC MODE) screen. Project recor ding f ormat (New Pr oject T ype ...
-
Korg MR-2000S - page 29
29 System setting (SYSTEM) Here you can adjust various system settings for the MR- 2000S itself. Press the menu button to access the menu list (MENU) screen, use the dial to select "SYSTEM," press the enter button to confirm, and then adjust the settings as described her e. LCD Contrast Here you can set the LCD contrast. Higher settings ...
-
Korg MR-2000S - page 30
30 2. T urn the dial to select the desired value, and press the enter button to complete the setting. The selection icon will change from " " to " ." Mark mode setting (Mark Mode) Here you can specify the mark mode that will be used during r ecor ding. This setting does not af fect the marks that you reg- ister during playback. ...
-
Korg MR-2000S - page 31
31 Project name setting (Pr oject Name) Here's how to assign the name for the project folder that is automatically created each time you record. Default Name: The name will be "file type (p.34)_0001--9999." Examples: DFF_0001, W A V_0001, etc. UserName: The name will be UserName0001--9999. Y ou can use up to eight characters to spec ...
-
Korg MR-2000S - page 32
32 Updating the software (SoftwareUpdate) Y ou can download the latest version of the softwar e update system files from the Korg website (www .korg.com). For details on the procedure, refer to the Kor g website. Preparing for the update Use a USB cable to connect the MR-2000S to your com- puter (see "Using the MR-2000S with your computer &qu ...
-
Korg MR-2000S - page 33
33 Using the MR-2000S with y our computer Y ou can use the MR-2000S as a USB 2.0 mass storage class device. This lets you copy files from the MR-2000S to your computer , or copy files (W A V , DSDIFF , etc.) from your computer into the MR-2000S There are limitations on the audio files that the MR-2000S can r ecognize (p.33). USB mode In this mod ...
-
Korg MR-2000S - page 34
34 Supported folders and file names FA T32 file system format. Long file names are supported, double-byte characters (e.g., Japanese) are not supported. MR_PROJ folder This folder contains folders recorded on the MR-2000S, organized by date. Don't use your computer to delete or rename the MR_PROJ folder . If you do so, the MR-2000S will no ...
-
Korg MR-2000S - page 35
35 Files inside the DFF_0001 folder (pr oject folder) DFF_0001.prj (project settings file) This is a file specific to the MR-2000S, containing infor - mation (protect setting, mark data, etc.) for each r ecor ded project. Only one file with this extension (.prj) can exist in each project folder . DFF_0001_001.dff (audio data fi le: dff) These ...
-
Korg MR-2000S - page 36
36 Appendix Tr oubleshooting Po wer does not turn on • Is the power cable correctly connected? • Is the power LED lit green? → If the power LED is lit red, the MR-2000S is in standby mode. Press the power button to turn it on ( → p.9). Nothing appears in the displa y • Is the contrast adjusted correctly? ( → p.29) No sound • Is the MR ...
-
Korg MR-2000S - page 37
37 V arious messages The message dialog box will disappear when you press the enter button or the exit button. Execution message Completed • The operation has been successfully completed. W orking... • The operation is being carried out. Please wait until this message disappears. Error messa g es Check Sum Error . • The software update has fa ...
-
Korg MR-2000S - page 38
38 Normally , a minimum of ten minutes of contiguous free space will be allocated if there is ten minutes or more free capacity; if there is less than ten minutes of free capacity , as much as exists will be allocated. It is not necessarily the case that the "Disk too busy ." error will always occur if this warning appears, but we recomme ...
-
Korg MR-2000S - page 39
39 Main specifications Frequency response:10 Hz ... 20 kHz ± 1 dB @ Fs 44.1 kHz / 48 kHz 10 Hz ... 40 kHz ± 1 dB @ Fs 88.2 kHz/96 kHz/ 176.4 kHz/ 192 kHz 10 Hz ... 100 kHz (1-bit) S/N : 103 dB (typical) @ IHF-A THD+N : 0.005% (typical), 20 Hz ... 20 kHz A/D conversion : 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM) D/A conversion : 2.8224 MHz/5.6448 ...
-
Korg MR-2000S - page 40
40 Inde x A All 25 All/Shuffle indicator 11 A udio 16 A udio file 33 A udio f older 35 A udioGate 35 A uto pause 25 A uto pause indicator 11 C Calendar 18 Calendar indicator 11 Clock 18 Clock source 29 Counter 12 Counter mode 17 Current project/file 11 D Def ault name 31 Delete all mark 24 mark 23 Delete project 20 Demo project 1 0 , 39 Detail proj ...
-
Korg MR-2000S - page 41
41 Recording 12 Recording f o r mat 1 3 , 28 Recording time 28 Ref erence le vel 29 Rename 19 Repeat 25 Repeat indicator 11 Reset 31 Rewind 10 S Selecting the project 16 Shuffle 25 Single 25 Specification 38 Synchronization 29 System 29 T TOT A L 17 T otal n umber 12 TOT AL REMAIN 17 T roub leshooting 36 U Update 32 USB mode 33 User name 31 W WAV ( ...
-
Korg MR-2000S - page 42
Owner’ s Manual E E Owner’ s Manual 4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan 2008 KORG INC. 2009 AH Printed in Japan IMPORTANT NOTICE TO CONSUMERS This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this produ ...
Do you have a question concerning Korg MR-2000S?
Use the form below
If you did not solve your problem by using a manual Korg MR-2000S, ask a question using the form below. If a user had a similar problem with Korg MR-2000S it is likely that he will want to share the way to solve it.