English dropdown-ico

Manual Barco R9001280

57 pages 2.65 mb
Download

Go to site of 57

Summary
  • Barco R9001280 - page 1

    R9001280 OWNER'S MANUAL VISION 8200 ...

  • Barco R9001280 - page 2

    ...

  • Barco R9001280 - page 3

    BARCO PROJECTION SYSTEMS Date : 280497 Art. No. : R5975348 R9001280 OWNER'S MANUAL VISION 8200 Rev : 01 ...

  • Barco R9001280 - page 4

    Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, April 1997. All rights reserved. Trademarks are the rights of their respective owners. Printed in Belgium BARCO nv/Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Printed in Belgium ...

  • Barco R9001280 - page 5

    Table of Contents i-1 5975348 BARCOVISION 8200 210497 T ABLE OF CONTENTS i TABLE OF CONTENTS ................................................................................................................................................................... i-1 SAFETY INSTRUCTIONS ..................................................................... ...

  • Barco R9001280 - page 6

    Table of Contents i-2 5975348 BARCOVISION 8200 210497 Gain adjustment per color ...................................................................................................... ............................................... 9-2 Smoothness ........................................................................................................ ...

  • Barco R9001280 - page 7

    Safety Instructions 1-1 5975348 BARCOVISION 8200 210497 1 SAFETY INSTRUCTIONS Projectors are built in accordance with the requirements of the international safety standards IEC950, UL 1950 and CSA C22.2 No. 950, which are the safety standards of information technology equip- ment including electrical business equipment. These safety standards impos ...

  • Barco R9001280 - page 8

    Safety Instructions 1-2 5975348 BARCOVISION 8200 210497 Remarque sur la Sécurité Les projecteurs sont fabriqués conformément aux exigences des normes de sécurité internationales IEC950, UL 1950 et CSA C22.2 No. 950. Ces normes de sécurité sont imposées aux équipements de la technologie informatique incluant les équipements électriques. ...

  • Barco R9001280 - page 9

    Safety Instructions 1-3 5975348 BARCOVISION 8200 210497 * Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. * To disconnect the cord, pull it out by the plug. Never pull the cord itself. * If an extension cord is used with this product, make sure that the total of the ampere ratings on ...

  • Barco R9001280 - page 10

    Safety Instructions 1-4 5975348 BARCOVISION 8200 210497 * Ne rien laisser en appui sur le cordon d’alimentation. Ne pas placer ce cordon là où des personnes risques de marcher dessus. * Pour débrancher le cordon, le tirer par le connecteur, jamais par le cordon lui-même. * Si on utilise une rallonge, vérifier que le total des courants des ap ...

  • Barco R9001280 - page 11

    Unpacking and Dimensions 2-1 5975348 BARCOVISION 8200 210497 L 2 UNP ACKING AND DIMENSIONS Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table. For transportation, the projector is mounted on a wooden board with 3 bolts. Use a 13 mm wrench to remove the ...

  • Barco R9001280 - page 12

    Unpacking and Dimensions 2-2 5975348 BARCOVISION 8200 210497 Battery installation in the RCU. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord. To install the battery, remove the battery cover on the backside of the remote control by pushing the indicated handle a little to the bott ...

  • Barco R9001280 - page 13

    Installation Guidelines 3-1 5975348 BARCOVISION 8200 210497 3 INST ALLA TION GUIDELINES Scr e en w i d th Installation guidelines Careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. Max. ambient temperature : 40 °C. Min. ambient ...

  • Barco R9001280 - page 14

    Installation Guidelines 3-2 5975348 BARCOVISION 8200 210497 * Where to install the projector? Definitions of the Abbreviation on drawings B = Distance between ceiling and top of the screen or between floor and bottom of the screen. A = Correction value, distance between bottom side of projec- tor (without feed) and middle of the lens. Value to be s ...

  • Barco R9001280 - page 15

    Location and Functions of Control 4-1 5975348 BARCOVISION 8200 210497 4 LOCA TION AND FUNCTIONS OF CONTROL Front panel terminology RS 232 IN REMOTE PROJECT OR MODE : GREEN - OPERATION RED - STANDBY COM MUNICAT ION P ORT (800 -PERIPHERALS) RS232 OUT 0I This device com plies with Part 15 of t he FCC rul es. Ope ration is subject to f ollowing tw o co ...

  • Barco R9001280 - page 16

    Location and Functions of Control 4-2 5975348 BARCOVISION 8200 210497 b. Remote control This remote control includes a battery powered infrared (IR) transmit- ter that allows the user to control the projector remotely. This remote control is used for source selection, control, adaptation and set up. It includes automatic storing of : - picture cont ...

  • Barco R9001280 - page 17

    Installation Set Up 5-1 5975348 BARCOVISION 8200 210497 5 INST ALLA TION SET UP The projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling. Front/Table Front/Ceiling Rear/ Table Re a r/C e ili ng When switching on and the projector displays an image as illustrated belo ...

  • Barco R9001280 - page 18

    Installation Set Up 5-2 5975348 BARCOVISION 8200 210497 Push the control disk up or down to highlight Systems Settings and press ENTER. ENTER displays the System Settings menu. EXIT returns to operational mode. Push the control disk up or down to highlight Installation and press ENTER . SYSTEM SETTINGS • Lamp Control Installatio n Input slots Sum ...

  • Barco R9001280 - page 19

    Connections 6-1 5975348 BARCOVISION 8200 280497 6 CONNECTIONS RS232 OU T IR- ACKNOWLEDGED I R-RECE I VED DI AG NOS TI CS CODE I R-RECE I VER 100 - 230 V 9 - 4 A 60 - 50 Hz 0 I This devic e complies w it h P a rt 15 of t he FCC rul es . O pera tion is s ub jec t t o fo llowing t wo condi t i ons : (1) This dev ice may no t c aus e harmful in terfer ...

  • Barco R9001280 - page 20

    Connections 6-2 5975348 BARCOVISION 8200 280497 When the total run time of the lamp is 970 hours or more, the following message will be displayed for 1 minute. This message will be repeated every 30 minutes. Press EXIT to remove the message before the minute is over. When the total run time of the lamp is 1000 hours or more, the following message, ...

  • Barco R9001280 - page 21

    Connections 6-3 5975348 BARCOVISION 8200 280497 Video/S-video input module To the Video input : Composite video signals from a VCR, OFF air signal decoder, etc... 1 x BNC 1.0Vpp ± 3 dB To the S-Video input : Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals. VIDE O /S -VIDEO I N PU T On On Video input Audio input no ...

  • Barco R9001280 - page 22

    Connections 6-4 5975348 BARCOVISION 8200 280497 RGB analog input module. RGB analog input terminals with separate Horizontal and Vertical sync inputs(RGB-HV), with Composite sync input(RGB-S) or with Sync signals on green(RGsB). Always use an interface when a computer and local monitor have to be connected to the projector. Interfaces to be applied ...

  • Barco R9001280 - page 23

    Connections 6-5 5975348 BARCOVISION 8200 280497 Push the control disk key up or down to select System Settings and press ENTER . Use the control disk to select Input Slots by pushing up or down and press ENTER . The internal system will scan the inputs and displays the result in the Input Slots menu. Push the control disk up or down to select the c ...

  • Barco R9001280 - page 24

    Connections 6-6 5975348 BARCOVISION 8200 280497 Straps on module level : Floating or non-floating input. R-Y : J3 : strap "yes" : non floating strap "no" : floating Y : J4 : strap "yes" : non floating strap "no" : floating B-Y : J5 : strap "yes" : non floating strap "no" : floating S : J6 ...

  • Barco R9001280 - page 25

    Connections 6-7 5975348 BARCOVISION 8200 280497 Straps on module level : Floating or non-floating input. Red : J3 : strap "yes" : non floating strap "no" : floating Green : J4 : strap "yes" : non floating strap "no" : floating Blue : J5 : strap "yes" : non floating strap "no" : floating H/ ...

  • Barco R9001280 - page 26

    Connections 6-8 5975348 BARCOVISION 8200 280497 Loosen the locking Open the top cover R B V R B V 100 - 23 0 V 9 - 4 A 60 - 50 H z RS232 O UT 0 I This devic e co mplies wi t h P art 15 of the FCC rules . Oper at ion is s ubj ec t t o foll owing t wo co ndi t ions : (1) This devi ce m ay not c ause harmful int erf erenc e (2) This devic e m us t ac ...

  • Barco R9001280 - page 27

    Controlling 7-1 5975348 BARCOVISION 8200 280497 7 CONTROLLING The projector can be controlled with a. The RCU b. The hardwired RCU (cable is not included) c. The local keypad. Controlling the projector with the RCU and the hardwired RCU is equal. How to use the RCU? a) Point the front of the RCU to the reflective screen surface. b) RCU used in a ha ...

  • Barco R9001280 - page 28

    Controlling 7-2 5975348 BARCOVISION 8200 280497 switch value 11 22 34 48 51 6 63 2 76 4 8 128 Example : address 83 DIP switch 1 2 3 4 5 6 7 8 setting 1 1 0 0 1 0 1 0 Summary : 1x1 + 1x2 + 0x4+ 0x8+ 1x16 + 0x32 + 1x64 + 0x128 = 83 b. How to control the projector or projectors. The projector's address may be set to any value between 0 and 255. W ...

  • Barco R9001280 - page 29

    Controlling 7-3 5975348 BARCOVISION 8200 280497 Brightness Control A correct 'brightness' setting is important for good image reproduc- tion. Use the + button for a higher brightness. Use the - button for a lower brightness. Contrast Control A correct 'contrast' setting is important for good image reproduction. Adjust the contra ...

  • Barco R9001280 - page 30

    Controlling 7-4 5975348 BARCOVISION 8200 280497 How to get a summary of your projector? The Summary gives an overview of : - type of projector - soft version - lamp run time - projector run time - address - installation configuration - baud rate - projector serial number - lamp serial number To display the Summary on the screen, press ENTER to star ...

  • Barco R9001280 - page 31

    Source Set Up 8-1 5975348 BARCOVISION 8200 210497 8 SOURCE SET UP Input selection Use the numeric keys on the RCU or use the local key pad to select the corresponding input slot. The source settings has to be installed for each source when these sources are displayed for the first time. Installation of the settings for a input source. Start up the ...

  • Barco R9001280 - page 32

    Source Set Up 8-2 5975348 BARCOVISION 8200 210497 Push the control disk up or down to select the most fitting file and press ENTER to select. When scrolling through the files, the image will be adapted according the settings of the selected file (on line adaptation). When the best fitting image is displayed, press ENTER to select this file. A loadi ...

  • Barco R9001280 - page 33

    Source Set Up 8-3 5975348 BARCOVISION 8200 210497 How finding the correct values for the displayed item? During the installation of a file with LOAD, the horizontal period, the total number of vertical lines and the interlaced mode are automati- cally measured and filled in in the menu table. These values will be available when starting up the EDIT ...

  • Barco R9001280 - page 34

    Source Set Up 8-4 5975348 BARCOVISION 8200 210497 Vertical refresh [sync/async] : The way of updating the image information on the LCD panels. * For sources with a vertical frequency up to 60 Hz : the vertical refresh rate is the same as the vertical frequency of the incoming source. This is a necessity to project moving images without 'motion ...

  • Barco R9001280 - page 35

    Source Set Up 8-5 5975348 BARCOVISION 8200 210497 Move To move a selected file to the file with the name and extension given in the TO area. Use the control disk to select MOVE and press ENTER . The move menu will be displayed. FIL E SERV ICE 847f Load Ed it Rena me Cop y Move Dele te Options MOVE FILE pal .s1 pal .c50 secam . s3 854 pal . c50 From ...

  • Barco R9001280 - page 36

    Source Set Up 8-6 5975348 BARCOVISION 8200 210497 ...

  • Barco R9001280 - page 37

    Picture Control in Adjustment Mode 9-1 5975348 BARCOVISION 8200 210497 9 PICTURE CONTROL IN ADJUSTMENT MODE The picture control menu is split up in two parts : Signal operations and Screen operations. Signal operations : to manipulate the video signal, e.g. sync slow/fast, color balance adjustment etc. Screen operations : to manipulate the projecti ...

  • Barco R9001280 - page 38

    Picture Control in Adjustment Mode 9-2 5975348 BARCOVISION 8200 210497 Gain adjustment per color If the obtained color balance is not yet correct, adjust with the separate gain controls until the desired color balance is obtained. Smoothness The lower the smoothness value, the sharper the image. The influence of this setting is visible on high dens ...

  • Barco R9001280 - page 39

    Picture Control in Adjustment Mode 9-3 5975348 BARCOVISION 8200 210497 Screen operations Select the Picture Control menu on the Main menu by pushing the control disk up or down. Press ENTER to select. Push the control disk up or down to select Screen operations . Press ENTER to select. When pushing continuously on the control disk, the adjustment w ...

  • Barco R9001280 - page 40

    Picture Control in Adjustment Mode 9-4 5975348 BARCOVISION 8200 210497 870 870 [windo w] moves the window upwards 870 870 [windo w] moves the window downwards 870 870 [windo w] stretches the window in the horizontal direction. 870 870 [windo w] Compresses the window in the horizontal direction. 870 870 [windo w] stretches the window in the vertical ...

  • Barco R9001280 - page 41

    Picture Control in Adjustment Mode 9-5 5975348 BARCOVISION 8200 210497 870 870 [windo w] [windo w] reduces the window, both of horizontal and vertical direc- tions simultaneously. reset button, brings the window to its maximum dimensions. Picture The picture can be moved, enlarged, reduced within a created window. [pi cture] Displays the covered in ...

  • Barco R9001280 - page 42

    Picture Control in Adjustment Mode 9-6 5975348 BARCOVISION 8200 210497 [pi cture] [pi cture] [pi cture] [pi cture] [pi cture] [pi cture] Compresses the picture in the horizontal direction. Stretches the picture in the vertical direction. Compresses the picture in the vertical direction. Zooms in the picture, both horizontal and vertical di- rection ...

  • Barco R9001280 - page 43

    Picture Control in Adjustment Mode 9-7 5975348 BARCOVISION 8200 210497 Configure The configure menu contains two toggle functions : geometry and conversion . Use the control disk to select Configure and press ENTER . SC RE EN OPE RA TION S 868b Zoom/Pa n Geom et ry (of f) Configure Co nv er sion [On ] Geom etr y [ Off] 874 CONF IGU RE Conversion Al ...

  • Barco R9001280 - page 44

    Picture Control in Adjustment Mode 9-8 5975348 BARCOVISION 8200 210497 Enlarge the upper part of the projected image in horizontal way. Reduce the upper part of the projected image in horizon- tal way. Enlarge the lower part of the projected image in horizontal way. Reduce the lower part of the projected image in horizon- tal way. Reset, brings the ...

  • Barco R9001280 - page 45

    Service Mode 10-1 5975348 BARCOVISION 8200 210497 SER VICE MODE 10 The service mode offers : - test patterns such as convergence patterns (green, red on green, blue on green and hatch patterns). - alignments for the decoder circuit such as luminance delay, comb filter, etc. (more info in service manual) - modifying password - resetting the lamp run ...

  • Barco R9001280 - page 46

    Service Mode 10-2 5975348 BARCOVISION 8200 210497 Factory programmed password : 0000 SERV IC E MODE Mo dif y Pas swo rd Reset Lamp R un Time La m p Run Ti me Hi st or y Convergence Disp la y Sett in gs De co de r Sett in gs Co lo r Ba la n ce I2 C De v ic e Te st 878 Convergence adjustment of the LCD panels. Every LCD panel has 6 adjustment screws. ...

  • Barco R9001280 - page 47

    Service Mode 10-3 5975348 BARCOVISION 8200 210497 The pattern shows lines of one pixel. Near six lines on the displayed pattern, a screw is drawn with a number next to it (e.g. if displayed in green = corresponding with the screws and numbers on the green LCD panel). When turning a screw in the direction marked by the arrow above the displayed scre ...

  • Barco R9001280 - page 48

    Service Mode 10-4 5975348 BARCOVISION 8200 210497 Two possibilities : 1) distance between red lines is smaller than distance between green lines. Turn screw 5 and 6 clockwise until distance between lines 5 and 6 is the same for the red and green lines. 2) distance between red lines is greater than distance between green lines. Turn screw 5 and 6 co ...

  • Barco R9001280 - page 49

    Service Mode 10-5 5975348 BARCOVISION 8200 210497 Modify password To change your password, highlight 'Modify password' and press ENTER to start up the password modification procedure. Enter your old password with the digit keys. After the fourth digit is entered, the next modify password menu is displayed. Enter Old Pass word : ---- MODIF ...

  • Barco R9001280 - page 50

    Service Mode 10-6 5975348 BARCOVISION 8200 210497 When Reset Lamp Run Time is selected in the Service Mode menu, the following warning will be displayed : Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the reset operation. WARNING RISK O F ELECT RICA L SH OCK ...

  • Barco R9001280 - page 51

    Standard Source Set Up Files A-1 5975388 BARCOVISION 9200 210497 ST ANDARD SOURCE SET UP FILES A Standard source set up files. Standard preprogrammed set up files. NAME RESOLUTION FVERT FHOR FPIX PTOT PACT LTOT LACT Hz kHz MHz CGA 640 X 200 59,924 15,700 14,318 912 640 262 200 NTSC 675 X 240I 29,970 15,734 13,500 858 675 263 240 NTSC_2 675 X 240I 2 ...

  • Barco R9001280 - page 52

    Standard Source Set Up Files A-2 5975388 BARCOVISION 9200 210497 ...

  • Barco R9001280 - page 53

    Battery Replacement in the RCU B-1 5975348 BARCOVISION 8200 210497 BA TTER Y REPLACEMENT IN THE RCU B fig. 1 Battery replacement in the RCU. Remove the battery cover on the backside of the remote control by pushing the indicated handle a little to the bottom of the RCU. Lift up the top side of the cover at the same time. (fig. 1) Remove the battery ...

  • Barco R9001280 - page 54

    Lenses C-1 5975348 BARCOVISION 8200 210497 C LENSES Focusing the lens Loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right. Attention : Do not turn out the lens too far, otherwise it will fall out of the lens holder. When the image is focused, secure the correct posit ...

  • Barco R9001280 - page 55

    Lenses C-2 5975348 BARCOVISION 8200 210497 Lenses This APPENDIX gives an overview of the tables and formulas for the available lenses for the projector. The next lenses are available : Name length lens diam. lens weight order number mm (inch) mm (inch) kg (lbs) HD(1.2:1) 253 (9.96) 189 (7.44) 8.7 (19.2) R9829200 HD(2.2:1) 235 (9.25) 137 (5.39) 7.5 ...

  • Barco R9001280 - page 56

    Source Numbers 90 - 99 D-1 5975348 BARCOVISION 8200 210497 D SOURCE NUMBERS 90 - 99 Source numbers 90 - 99 These source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a RCVDS 05 or VS05. An additional adjustment file can be created for these source numbers. This file can contain different set ...

  • Barco R9001280 - page 57

    Insert Card 5975348 BARCOVISION 8200 210497 P RCU INP UT SO URC ES 1 PRO JECTO R RCVDS 2 3 4 5 6 1 2 3 5 6 7 8 9 10 INPU T SOU RCES 7 P RCU INP UT SO URC ES 1 PRO JECTO R RCVDS 2 3 4 5 6 1 2 3 5 6 7 8 9 10 INPU T SOU RCES 7 INSERT CARD ...

Manufacturer Barco Category Projection Television

Documents that we receive from a manufacturer of a Barco R9001280 can be divided into several groups. They are, among others:
- Barco technical drawings
- R9001280 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco R9001280
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco R9001280.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco R9001280, service manual, brief instructions and user manuals Barco R9001280. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco R9001280.

Similar manuals

A complete manual for the device Barco R9001280, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco R9001280 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco R9001280.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco R9001280 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco R9001280, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco R9001280, that we can find in the current document
3. Tips how to use the basic functions of the device Barco R9001280 - which should help us in our first steps of using Barco R9001280
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco R9001280
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco R9001280 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco R9001280?

Use the form below

If you did not solve your problem by using a manual Barco R9001280, ask a question using the form below. If a user had a similar problem with Barco R9001280 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)