English dropdown-ico

Manual Emerson Mobrey MSP400RH and MSP900GH

182 pages 8.13 mb
Download

Go to site of 182

Summary
  • Emerson Mobrey MSP400RH and MSP900GH - page 1

    Reference Manual IP2048/RM, Rev AA February 2015 Mobre y MSP400RH and MSP900GH Ultrasonic Liquid Le ve l T ransmitt ers ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 2

    ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 3

    Reference Manual IP2048/RM, Rev AA Title Page February 2015 Mobre y MSP400RH and MSP900GH Ultras onic Liquid Le v el T ransmitt er s R ead this m anual bef ore working with the product. For person al and system saf ety , and for optimum produc t per formance , make sure you thoroughly underst and the conte nts before installing, using, or maintain ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 4

    ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 5

    TOC - 1 Reference Manu al IP2048/RM, Rev AA Table of Contents February 2015 Ta b l e o f C o n t e n t s T able o f Co nt e n ts 1 Section 1: Introduction 1.1 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Manual overview . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 6

    TOC - 2 Reference Manu al IP2048/RM, Rev AA Table of Contents February 2015 T able of C ontents 4.2 Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 7

    TOC - 3 Reference Manu al IP2048/RM, Rev AA Table of Contents February 2015 Ta b l e o f C o n t e n t s 5.4.11 Temperature calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 5.4.12 Loading factory default values. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 5.4.13 Changing th ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 8

    TOC - 4 Reference Manu al IP2048/RM, Rev AA Table of Contents February 2015 T able of C ontents 10 Appendix F: Configuring Using HART F. 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 F. 2 Command parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 9

    TOC - 5 Reference Manu al IP2048/RM, Rev AA Table of Contents February 2015 Ta b l e o f C o n t e n t s F .3.24 Lost echo delay (P021) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 F .3.25 Lost echo action (P022) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 F .3.26 Speed of ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 10

    TOC - 6 Reference Manu al IP2048/RM, Rev AA Table of Contents February 2015 T able of C ontents F .4.17 Model code (D949) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 F .4.18 Hardware rev. (D952) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 F .4.19 Software revisi ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 11

    Reference Manual IP2048/RM, Rev AA Sec tion 1: Introduction February 2015 1 Sec tion 1 Introduc tion Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1 Manual overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 12

    2 Reference Manu al IP2048/RM, Rev AA Sectio n 1: Introduction February 2015 1.2 Manual o ver view This manual provides installation, configuration, and mainte nance inf ormation for the Mobrey MSP400RH and MSP900GH ultrasonic liquid level transmitters.  Section 2: T ransmitte r Overview  Section 3: Installa tion  Section 4: Starting up ? ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 13

    Reference Manual IP2048/RM, Rev AA Sec tion 2: T ransmitter Ov er view February 2015 3 Sec tion 2 T ransmitte r Ov e r view Introduction to the transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3 Theor y of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 14

    4 Reference Manu al IP2048/RM, Rev AA Section 2: T ransmitte r Ove r view February 2015 2.3 Components of the tr ansmitter The tran smitter has a housing c ontain ing advanced elec tronic s to generate ult rasoni c pul ses, proces s the resultant sign als, and provide a 4–20mA and HAR T output. Re moving the lid reveals terminals to connect a cab ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 15

    5 Reference Manu al IP2048/RM, Rev AA Sectio n 2: T ransmitter Overview February 2015 Figure 2-3. System arc hitecture A. M obrey MSP Se ries T ransmitter B. T wo Rel ay Outputs (MS P400RH only) C. Mob rey Remote T emperature Sensor (O ptional Accessor y) D. 4–20 mA / HART Sign als E. Mobrey MCU900 Series Control Unit F . Fiel d Communicator G. C ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 16

    6 Reference Manu al IP2048/RM, Rev AA Section 2: T ransmitte r Ove r view February 2015 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 17

    Reference Manual IP2048/RM, Rev AA Section 3: Installation February 2015 7 Sec tion 3 Installa tion Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 Considerations before installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 18

    8 Reference Manu al IP2048/RM, Rev AA Section 3: Installation February 2015 3.2 Considera tions before installation The Mobrey M SP400RH and MS P900GH transmitte rs can be used f or leve l and con ten ts volume measu rem ents i n o pen or close d t an ks , o r for op en cha nn el fl ow m easur ements . The transm itter mu st be in stalled in a loca ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 19

    9 Reference Manu al IP2048/RM, Rev AA Section 3: Instal lation February 2015 3.3 Mechanical installation Guidelines 1. Mount the transmitte r abov e the liquid surf ace us ing the 2-inch thread pro vided, but not cl ose r than 12 in. (0,3 m) to the sur fac e . The transmitter does no t detect any liquid sur fac e close r than 12 in. (0,3 m) to the ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 20

    10 Reference Manu al IP2048/RM, Rev AA Section 3: Installation February 2015 Figure 3-1. Min And Max Distances F rom T ank Wall A. T ransmitter is mounted ve r tically (maximum dev iation of 3°). B. Use a non-metall ic fitting or flange. C. 6° beam half ang le D. 1.3 in./ft. (11 cm/m). Minimum of 12 in. (0.3 m). 3.3.1 Conside r the liquid sur fac ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 21

    11 Reference Manu al IP2048/RM, Rev AA Section 3: Instal lation February 2015 3. In tanks with rounded or conical bottoms, mount the transmitter o ff-cen ter . If needed, a perforated reflector pla te can be installed on the tank bottom directly under the transmitte r ce nter line to ensure a satisf actor y return echo . 4. Avoid detecting pump cas ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 22

    12 Reference Manu al IP2048/RM, Rev AA Section 3: Installation February 2015 Figure 3-2. Mounting the tr ansmitter using a bracke t kit A. Stainless steel bracket B. No. 4X 13 long self tap screw (3 positions), carbon steel (zinc plat ed) C. PV C disc Installing in a tank with a nozzle or stand-off Installation procedure 1. Use PTFE tape o n the sc ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 23

    13 Reference Manu al IP2048/RM, Rev AA Section 3: Instal lation February 2015 Figure 3-3. Mounting the tran smitter using a no zzle/stand-off D. See dime nsion D in T able 3-1. L. See dimensio n L in T able 3-1. T able 3-1. Nozzle diameter size and maximum len gth 3.3.4 Open c hanne l flow installations There are norm ally t wo distinct par ts to a ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 24

    14 Reference Manu al IP2048/RM, Rev AA Section 3: Installation February 2015 Figure 3-4. Choosing the he ight position abov e a flow A. T ran sm it t er fr on t fa ce B. Hma x C. Hmax + 14 in. D. Mobrey MCU900 Series control unit It is impor t ant that the bottom ref ere nce of the transmitter should be rela ted to the datum of the primar y mea sur ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 25

    15 Reference Manu al IP2048/RM, Rev AA Section 3: Instal lation February 2015 Figure 3-6. T ransmitt er bottom ref erence for a ‘V’ no tch wei r A. T ransmitter bottom re fere nce (i.e. true inv ert ) B. Men iscu s Lev el Note  The transm itter should be free fro m a situation where it is likely to 'drown' (ref er to rele vant S ta ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 26

    16 Reference Manu al IP2048/RM, Rev AA Section 3: Installation February 2015 3.4 Electrical installation 3.4.1 Connecting the cable(s) to the transmitte r The Mobrey MS P400RH and MSP900GH are two-wire loop-power ed transmitte rs accepti ng power supplie s as follows :  MS P400RH:12 to 40 Vdc (non-h azardou s area only)  MS P900GH:12 to 40 Vd ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 27

    17 Reference Manu al IP2048/RM, Rev AA Section 3: Instal lation February 2015 3.4.2 Connecting the cable wires to the M SP400RH Connec t the cable wires to the transmitter a s shown in Figure 3-7 . See also “Wiring to allo w HART c ommunications ” on page 19 if HART digital c ommunications is required. Note  Mak e sure the power supply is of ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 28

    18 Reference Manu al IP2048/RM, Rev AA Section 3: Installation February 2015 Rel ays The MS P400RH ha s t wo integr al rel ays which m a y be us ed for fault indication or c ontrol purp oses. Th ese relays are for light duty and should be used a s signal rel ays only , with con trol functions being performed by external c ontrol rel ays.  Re la ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 29

    19 Reference Manu al IP2048/RM, Rev AA Section 3: Instal lation February 2015 Figure 3-8. Wiring diagram for the MSP900GH 3 .4 . 4 Remote tem p er atu r e sen s or The MS P400RH and MS P900GH acce pt inp ut from a Mobrey R emote T empera ture Sensor (see Product Data Sheet IP20 45 for acce ssory par t numbers). This is a the rmistor-ba sed te mpera ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 30

    20 Reference Manu al IP2048/RM, Rev AA Section 3: Installation February 2015 If the transmit ter is be ing supplied t hrough a safety bar rier , ensure the t ype chosen will pass HAR T inf orma tion. After the loa d resistor is install ed, a Field Communica tor can be co nnec ted acros s the load resistor . It is the responsibilit y of the in stall ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 31

    Reference Manual IP2048/RM, Rev AA Section 4: Starting up February 2015 21 Sec tion 4 S tar ting up Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21 Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 32

    22 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 Figure 4-1. Displa y and push-buttons 4.1.2 Po we r up When the po wer is t urned on, the transmitte r t ak es sev eral s econds t o initiali ze . The displa y will run a set-up routine, first illuminating all display characters, and th en showing the sof t ware revision nu ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 33

    23 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 4.1.3 Bef ore programming Impor tant notes t o help yo u program the transmitter  Do n ot al low ra in, o r water , to enter the tran smi tter du rin g pro gram ming or the circuit boards ma y be damaged.  See the ins tru c tion s belo w on how to use the push- butto ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 34

    24 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 4.2.2 Selecting the dut y Screen display: dutY Factory default setting : Level The arrow ic on on the left side of the PV dis play in dicates the se lected dut y . The MSP400RH and MS P900GH may be programmed to pe r form one of f our duties: 1. Di s t an ce me asu r emen t ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 35

    25 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 4 .2 . 3 Sel e c ti n g t he u n i ts of m eas ur em ent Screen display: unitS Factory default setting : m (metric) or ft (Imperial) The transmitter is pre-programmed with selectable mea suremen t units f or each of the dutie s: 1. Distance and L eve l mea sureme nt: m , f ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 36

    26 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 4.2.4 Setting the c orrec t bottom re fe renc e Screen display: b.rEF Factory default value: 11 The transmitt er le ave s the factor y with th e bott om refe rence pre-programmed to the maximum range of the instrume nt 36 f t. (11 m). Note  It is import ant t o not en te ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 37

    27 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 7. Re pea t steps (5) and (6) until the l ast digit is fl ashing, and edited a s required. 8. Press the blue button  to confir m th e new b.rEF value. None o f the digits should now be fl ashing. 9. If the new b.rEF value is c orrec t, press the red button  to save. ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 38

    28 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 T o change the c ontents profile 1. If ente r ing the menu system from the PV display , press the green button  repe atedly unti l the “ ProF ” menu option is indicated (see note on previous page). 2. Press the blue button  to enter th e “ ProF ” menu and disp ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 39

    29 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 T o change the flow profile 1. If ente ring the menu system from the PV display , press the green button  repea tedly until the “ ProF ” menu option is indicated (see note on previous page). 2. Press the blue button  to enter th e “ ProF ” menu and displa y t ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 40

    30 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 T able 4-1. Profile options for flo w Hmax Scale F actor Power Fa c t o r 20 mA Point (1) (1) Where en tries do no t say “(Use r)”, the 20 mA Point (U pper R ang e V alue) is a utomati cally s et to the val ue in the mete rs (m) o r feet /inches (f t./ in.) col umn depe ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 41

    31 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 4.2.6 Powe r F ac tor for the F low Law Screen display: P.FACt Factory default value: 1.000 This menu is offered if the se lec ted dut y is Fl ow and a profile (e.g. “ SPEC.C ”) requires the manual editing of a power factor in th e formula : Flow Q = kh * (where * = th ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 42

    32 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 4.2.7 K-fac tor f or the flow law Screen display: SCALE Factory default value: 1.000 Note  If a flow dut y has bee n selected, the va lue ente red into this parameter is in effect the K-factor in a flow law o f the form Flow Q = kh*. If a Distance , Leve l or Conte nts ( ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 43

    33 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 Note  If the existin g data e nte red allo ws the transmitte r to calcula te the maxim um flow , the 4 mA and 20 mA poin ts are set t o 4 mA at ze ro flow and 20 mA at maximum flow. 4.2.8 Maximum lev el e ntr y Screen display: LEUEL @ max Factory default value : 1.000 T ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 44

    34 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 4.2.9 Maximum flow e ntr y Screen display: Flo @ max Factory default value: 1.000 This menu option is offe red if the selec ted dut y i s Flow and requires entr y of the maximum f low capabilit y of the chosen struc ture (not the maximum fl ow expec ted in the application ) ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 45

    35 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 4.2.10 Maximu m con ten ts (volume) en tr y Screen display: Cont @ max Factory default value : 1.000 This menu option is offe red if the selec ted dut y is Cont ents (V olume ) and requires entr y of the maximum con tents o f the vessel. Note  This me nu option is in th ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 46

    36 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 4.2.11 Settin g the 4 mA point Screen Display: 4 Factory default value: 0.000 Ente r the PV valu e to be sign alled by 4 mA. The 4 mA point can be s et abov e or belo w the 20 mA point to suit monitoring or control equipme nt. The 4 and 20 mA point s can be set b y ranging ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 47

    37 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 4.2.12 Setting the 20 mA poin t Screen Display: 20 Factory default value: 10.7 Ente r the PV value to be signalled b y 20 mA. Th e 20 mA point may be set above or below the 4 mA point to suit monitoring or control equipment. Note  This me nu option is in the programming ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 48

    38 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 4.2.13 Setting the outp ut damping Screen display: d Factory default value: 3 The damping value is a time constant in se conds, and is applied as smoothing to the display ed PV and the output cu rren t. A new value may be e ntered up to 999 seconds. A l arge value will hav ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 49

    39 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 4.2.14 Selecting the alarm c ondition ac tion Screen display: AL Factory default value: Hold The MS P400RH and MSP900G H can signal an alarm c ondition if the targe t echo is lost f or 900 seconds or more . The 900 seconds is factor y set and is change able in the field. T ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 50

    40 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 4.2.15 Setting the re lay on and o ff points (M SP400RH) The MS P400RH ha s t wo integral si gnal rel ays. Bo th rela ys are the SPST (Single P ole, Singl e Throw) type. RL1 is fac tor y-set to be a co ntr ol r elay . It may be set to e nergise at an y value of PV , and de- ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 51

    41 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 Note  This me nu option is in the programming me nu. See Figure C-1 on page 76 fo r a map of the men u structure and how to acce ss the me nu option s. T o change the Off PV point for c ontrol relay RL1 (or RL2) 1. If ente ring the menu system from the PV display , pres ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 52

    42 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 T o set the 4 mA lev el 1. If ente r ing the menu system from the PV display , press the green button  repe atedly unti l the “ SEt 4 ” menu option is indica ted (see note on the previou s page). 2. Press the blue button  t o display the PV at 4 mA. 3. If the v ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 53

    43 Reference Manu al IP2048/RM, Rev AA Section 4: Startin g up February 2015 Check the main displa y to ensure the duty , units and PV are correct, and that rel ays are on or off accor ding to the set points programmed . The cov er ma y now be repl aced (see “What to do af ter completing the cabl ing” on page 16 ). 4.3 Final checks Final checks ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 54

    44 Reference Manu al IP2048/RM, Rev AA Section 4: Starting up February 2015 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 55

    Reference Manual IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 45 Sec tion 5 Se r vic e and T roubleshoo ting Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 45 Ser vicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 56

    46 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 5.2 Ser vicing The only main ten ance requir ed is to occasi onally check t he transmitte r face t o ensure it re mains clean and c heck that the co ve r seal, wiring , and cable glands are in good c ondition. There are no s pare par ts for the Mobr ey MSP40 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 57

    47 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 (Press the re d button  at a ny ti me to re -d ispl ay th e “ diAg ” menu op tion, and pressing it again restores the PV di spla y .) 2. Press the gree n button  to get to th e n ex t di agn os tic dat a, “ LEUEL ”. This is the lev el me asurem ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 58

    48 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 2. Press the blue button  to enter th e “ CyCLE ” menu. The displ ay indica tes “0.0000”. 3. Press the blue button  to star t t he c ycl e. For 100 seconds, the transmitter c ycles from the 4 mA value to the maximum PV value and back to the 4 m ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 59

    49 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 5.4 Engineering menu Menu structures f or this s ection are in Appe ndix C: Integrated Displ ay Menu s ( page 75 ) Note If using a HAR T Maste r Devic e for programming the MS P400RH or MSP900GH, re fe r to the following sectio ns for menu structu res and pa ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 60

    50 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 T o change the threshold v alue 1. A f ter enter ing the “ Eng ” menu (see the note abov e), the first menu option indicated is “ t.HoLd ”. 2. Press the blue button  t o ente r the menu f or “ t.HoLd ”. The display indicates the prese nt thres ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 61

    51 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 T o change the lost echo time 1. A f ter enter ing the “ Eng ” menu (see the note abo ve), pres s the green button  repe atedly un til “ LE ” is indi cated. 2. Press the blue button  t o ente r the menu f or “ LE ”. The display indicat e ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 62

    52 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 T o change the dead band 1. A f ter enter ing the “ Eng ” menu (see the note abo ve), pres s the green button  repe atedly until “ dEAd ” is indicated. 2. Press the blue bu tton  to e nter the dead band me nu. The displa y indicates the pres ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 63

    53 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 T o change the frequenc y 1. A f ter enter ing the “ Eng ” menu (see the note abo ve), pres s the green button  repe atedly un til “ F ” is indicated. 2. Press the blue button  t o ente r the frequency menu. The displ ay indicate s the prese ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 64

    54 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 T o change the pulse repetition frequency 1. A f ter enter ing the “ Eng ” menu (see the note abo ve), pres s the green button  repe atedly until “ Prf ” is indicated. 2. Press the blue button  t o ente r the pulse frequency m enu. The displ ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 65

    55 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 7. If the new setting is c orrec t, press the red butt on  to save. The displa y changes to th e next menu opti on. 8. If the new setting is inc orrec t, press the blue butt on  to exi t to t he menu. 9. The menu “ Stir ” re -appears to re-start at ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 66

    56 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 5.4.9 Le arn about echoes from f alse targets Screen display: Lrn The MS P400RH and MSP900GH h as an ea sy-to-use “ Lrn ” (Le arn) routine that allows the instrum en t to learn up to four false echoes, wh ich can then be ignored in future operations. If ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 67

    57 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 T o clear all the stored false echoes 1. A f ter enter ing the “ Eng ” menu (see the note abo ve), pres s the green button  repe atedly un til “ Lrn ” is indica ted. 2. Press the blue button  to enter th e “ Lrn ” menu. 3. With the dis p ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 68

    58 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 T o edit and fix the temperature 1. A f ter enter ing the “ Eng ” menu (see the note abo ve), pres s the green button  repe atedly until “ t ” is indicated. 2. Press the blue button  t o ente r the tempe rature menu. The displa y indicates t ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 69

    59 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 T o edit and fix the temperature 1. A f ter enter ing the “ Eng ” menu (see the note abo ve), pres s the green button  repe atedly un til “ t.CAL ” is indicated. 2. Press the blue button  to enter th e “ t.CAL ” menu. The displa y indica ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 70

    60 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 T o load factor y default values 1. A f ter enter ing the “ Eng ” menu (see the note abo ve), pres s the green button  repe atedly until “ Ld.dEF ” is indica ted. 2. Press the blue butt on  to ent er t he lo ad def au lt s “ Ld.dEF ” men ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 71

    61 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 6. Press the blue button  to c onfir m the selec ted base units. ( The flashing stops). 7. If the new setting is c orrec t, press the red butt on  to save. (The transm itter automa tically re-st ar ts as if it was a new instrument on first power-up). 8 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 72

    62 Reference Manu al IP2048/RM, Rev AA Section 5: Service and Troubleshooting February 2015 5.5 F alse echoes under cert ain ambient operating conditions In applications whe re elev ated ambie nt te mpera tures of around 122 to 140 °F (50 t o 60 °C) are experie nced, t ogether with poor liquid sur fac e conditions (excessiv e sur face agit ation, ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 73

    Reference Manual IP2048/RM, Rev AA Appendix A: Reference Data February 2015 63 Appendix A R ef e re nce D ata Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 63 Dimension drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 74

    64 Reference Manu al IP2048/RM, Rev AA Appendix A: Reference Data February 2015 Output units  For Le vel or distance-to-surface: m, ft, in, or none  For Co nte nts : l, m 3 , gal, ft 3 , or none  For Flow: l/s, l/m, m 3 /hr , gal /s , gal /m , f t 3 /m (cfm) , f t 3 /hr , or none Outp ut v ari ables  Lev el (or distanc e-to-sur face) , ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 75

    65 Reference Manu al IP2048/RM, Rev AA Appendix A: Reference Data February 2015 Outp ut cab ling  Single twisted-pair and shie lded, min. 0,22 mm 2 (24 A WG), max. 1,5 mm 2 (15 A WG) A .1.5 Ph ysical specifica tions Materials selection  Emerson provides a variet y of produc t with various produc t options and configurations including mate ria ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 76

    66 Reference Manu al IP2048/RM, Rev AA Appendix A: Reference Data February 2015 A. 1 . 8 En vi r o n me n t Ambient temperature (1)  MS P400RH: –40 to 158 °F (–40 to 70 °C)  MS P900GH: –40 to 140 °F (–40 to 60 °C) Process temperature  –22 to 158 °F (–30 to 70 °C) Process pressure :  –4 to 44 psi (–0,25 to 3,0 bar) ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 77

    67 Reference Manu al IP2048/RM, Rev AA Appendix A: Reference Data February 2015 Figure A-2. L oad limitati ons A Field Communicator requires a minimum load resistance of 250 Ohm within the loop in order to function properly. Communication with Mobrey MCU900 Series Control Unit does not require additional resist ance . The maximum l oad resistance c ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 78

    68 Reference Manu al IP2048/RM, Rev AA Appendix A: Reference Data February 2015 A. 2 D im en s i o n d r a wi n gs Figure A-3. T ransmitter Dimensio ns (Nylon-filled Glass Housing) Note : Dimensions are in inches (mm). Ø5.7 (Ø144) 5.3 (135) 2.6 (65) 2-in. Thread 2.36 (60) A/F Hexagon M20 x 1 .5 Cable Entries ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 79

    69 Reference Manu al IP2048/RM, Rev AA Appendix A: Reference Data February 2015 Figure A-4. The 2-in. NPT/BSPT mounting bracke t 0.51 (13) 4.33 (110) 2.95 (75) 0.35 (9) Ø1 . 02 (Ø26) 0. 2 6 (6,5) TY P . 2.26 (57) 4.02 (102) 2.24 (57) 1.5 (38) Note : Dimensions are in inc hes (mm). SIDE VIEW END VIEW ACTUAL VIEW WITH TRANSMIT TER MOUNTED 2-in. NPT ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 80

    70 Reference Manu al IP2048/RM, Rev AA Appendix A: Reference Data February 2015 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 81

    Reference Manual IP2048/RM, Rev AA Appendix B: Product Certifications February 2015 71 Appendix B Produc t Ce r tifications Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 71 Approv ed manufac turing location . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 82

    72 Reference Manu al IP2048/RM, Rev AA Appendix B: Product Certification s February 2015 B.3 European dir ec tive inf ormation A copy of the E C declaration of conf orm it y certificate for the tran smitters may be obtained by contacti ng your local sal es office . A TEX direc tive (94/9/E C)  The MSP900GH c omplies with the A TE X directive Pre ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 83

    73 Reference Manu al IP2048/RM, Rev AA Appendix B: Product Certifications February 2015 A TE X conditions for safe use (MSP900GH-A only) 1. The equipmen t may be us ed with flammabl e g ases and vapors with appara tus groups IIA , IIB, and IIC, and with tempera ture clas ses T1, T2, T3, T4, T5, and T6. 2. Installation of this equipment sh all be ca ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 84

    74 Reference Manu al IP2048/RM, Rev AA Appendix B: Product Certification s February 2015 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 85

    Reference Manual IP2048/RM, Rev AA Appendix C: Integrated Display Menus February 2015 75 Appe ndix C Int egrated Dis pla y Me nu s Main menu map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 76 Diagnostics menu map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 86

    76 Reference Manu al IP2048/RM, Rev AA Appendix C: Integrated Display Menus February 2015 C .1 M ain menu map Figure C-1. Main menu programming ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 87

    77 Reference Manu al IP2048/RM, Rev AA Appendix C: Integrated Display Menus February 2015 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 88

    78 Reference Manu al IP2048/RM, Rev AA Appendix C: Integrated Display Menus February 2015 C .2 Diagnostics men u map Figure C-2. Diagnostics menu ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 89

    79 Reference Manu al IP2048/RM, Rev AA Appendix C: Integrated Display Menus February 2015 C .3 Engineering menu map Figure C-3. Engineering menu ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 90

    80 Reference Manu al IP2048/RM, Rev AA Appendix C: Integrated Display Menus February 2015 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 91

    Reference Manual IP2048/RM, Rev AA Appendix D: Mobrey MCU900 Series February 2015 81 Appendix C: Mobrey MC U900 Series control unit Appe ndix D Mobrey MCU900 Se ries D .1 Introduc tion The MSP400RH and M SP900GH can be us ed with the Mobrey MCU900 Series c ontrol unit. This con trol unit supplie s the 24 Vdc loop-powe r to th e tr ans mit ter , a n ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 92

    82 Reference Manu al IP2048/RM, Rev AA Appendix D: Mobrey MCU900 Series February 2015 Appendix C: Mobrey MC U900 Series control unit T able D-1. Mobrey MSP400RH and MSP900GH transmi tter menus and para meters on a MCU900 Series c ontrol unit Menu Lev el 1 Menu Level 2 Menu Le vel 3 Menu Le vel 4 Parameter ID and Descriptor Units MSP400RH MSP900 GH ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 93

    83 Reference Ma nual IP2048/RM, Rev AA Appendix D: Mobrey MCU900 Series February 2015 Appendix C: Mobrey MC U900 Series control unit ADV ANCED P040 Tx P wr Control ( page 135 )- Enabled En abled P041 Pulse Repeat ( page 136 )s e c 1.0 1.0 1.0 1.0 1.0 1.0 P042 Echoes Needed ( page 136 )% 444444 P043 Threshold 1 Time ( page 137 )m s 2.9 2.9 2.9 2.9 2 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 94

    84 Reference Manu al IP2048/RM, Rev AA Appendix D: Mobrey MCU900 Series February 2015 Appendix C: Mobrey MC U900 Series control unit MONIT OR (1) RE ADINGS V ARIABLES D900 Primary Variable ( p age 147 )A s P 0 1 2 ------ D901 Lev el (SV) ( pag e 148 ) (2) ---- -- D902 Distance (TV) ( page 149 ) (2) ------ D903 T empe rature ( page 15 0 )  C or ? ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 95

    Reference Manual IP2048/RM, Rev AA Appendix E: Field Communicator February 2015 85 Appendix E Fie ld Communica tor Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 85 Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 96

    86 Reference Manu al IP2048/RM, Rev AA Appendix E: Field Communicator February 2015 Figure E-1. Field Communicator menu tree 1. Overview 2. Configure 3. Service T ools 1. Status 2. Primary Purpose V ariables 3. Shortcuts 1. Active Alerts 2. Communication Status 1. Identity 2. Communication 1. Primary V ariable D900 2. Level (SV) D901 1. Device Info ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 97

    87 Reference Manu al IP2048/RM, Rev AA Appendix E: Field Communicator February 2015 1. Overview 2. Configure 3. Service T ools 1. Alerts 2. V ariables 3. T rends 4. Maintenance 5. Simulate 1. Active Alerts 2. Diagnostic Data See Previous Page See Previous Page 1. V ariables 2. Analog Output 1. T arget Data 2. Speed of Sound Data 3. Operation 1. Dis ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 98

    88 Reference Manu al IP2048/RM, Rev AA Appendix E: Field Communicator February 2015 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 99

    Reference Manual IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 89 Appe ndix F C onfiguring U sing HART Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 89 Command parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 100

    90 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .2 Command par ameters F. 2 . 1 B a s e u n i t s When the transmitte r is shipped from the fac tor y , th e default fac tor y setting for Base Un its is “ metric ” or “ imperial ft ” de pending on the model order c ode (see Produc t Da ta Sheet IP2045 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 101

    91 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Note  The display (re por ted) unit s of the transmit ter’s proces s value (PV) can be changed t o metric or imperial me asuremen t unit s using the parameter Primary Vari able Units ( page 120 ). Howeve r , this doe s not auto matica lly re-scale the PV . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 102

    92 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .2.3 Prese nt de pth If the Bo ttom R ef ere nce is unknown but the presen t liquid depth is know n , the transmitter can set the Bottom R eference value using the Present Depth value, the live Distance meas ur ement, a nd o pti ona l of fs ets: P010 = ( Depth ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 103

    93 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .2.4 Le arn false e cho The transmitt er can be m anually t old the liv e Distance (on page 153 ) is being calculat ed from a fals e targ et ech o and tha t echo can the ref ore be ignore d. If the re is anothe r fals e target ec ho, repe at the learning proce ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 104

    94 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F. 2 . 5 A u t o t a n k m a p The transmitte r can automa tically map up to four echoes from false targets within an emp t y tank. The tank needs t o be e mp t y so t hat echoes from all f alse targe ts are exposed . Note  Set the Bottom R eference ( page 10 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 105

    95 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .2.6 Simula tion of PV The transmitte r simulations au toma tically cycle the PV be t ween the bo ttom of the tank and the neare st mea surable distanc e. The cyc le direc tion is give n by the name of the simulation mode selected. Simulation mode s are:  ? ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 106

    96 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F. 2 . 7 R e s t a r t d e v i c e This re-star t s the transmitter a s if the power h as been in terrupted. Field Communicator T o restore the original fac tor y configuration: 1. F rom the Home screen, selec t 3: Ser vice T ools . 2. Select 4: Maintenance . 3. ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 107

    97 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .2.8 L oad defaults This restores the tran smit ter para meters to the fac tor y defau lt val ues for the s elect ed base units. T his is sometimes ne cessar y , par ticularly if th e data held in the transm itter is in doubt. Note  Re storing the fac tor y ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 108

    98 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F. 2 . 9 S i m u l a t e c u r r e n t o u t p u t This forc es a fixed outp ut current in the ra nge 4 to 20 mA. This featur e temp ora ril y over ri des th e normal fun c tion of the transmitte r’s PV driving the 4–20 mA Curre nt Output u ntil exitin g to ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 109

    99 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .2.10 T rim 4 mA / T rim 20 mA This is for calibrating the 4 mA and 20 mA output cur rent from the transmitter . The output curre nt is te mporarily set to 4 mA and 20 mA. Measure the a c tual output current and the n input that mA v alue to re-calibrate . The ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 110

    100 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 7. Select the “ Quit ” instru c tion t o exit. T o re-calibrate the 20 mA output current: 1. F rom the Main M enu screen, select SE TUP . 2. Select the transmitter (e .g. “ Tx1:MSP400RH ”). 3. Select SYSTE M 4. Select TRIM 5. Select T rim 20mA . 6. Foll ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 111

    101 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3 Configuration p aramet er s F .3.1 Message (P000) This allows a genera l 32-characte r message t o be edited (12 characte rs if using a MCU900 Serie s Control U nit). It c an be used for any purpose, such as a suppor t con tac t number , or details o f las ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 112

    102 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.2 T ag (P001) This is for editing an electronic ‘label’ of up to 8 characters for the transmi tter . The tag is t ypically a refere nce number , location, or duty description. Field Communicator T o view or change t he tag: 1. F rom the Home screen, se ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 113

    103 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 4. Select 1: Identity , and then 2: De scriptor P002 . 5. If required : ( a ) Input the descriptor , and then press “ ENTER ” to save it. ( b ) Pres s “ SEND ” to u pdate t he t rans mi tter . Mobre y MCU900 Seri es cont rol unit T o view or c hange the ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 114

    104 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F . 3 . 5 S eria l nu m b er (P 0 0 5 ) This is a fa ctor y-set parameter showing a multiple-digit number . It is used by the fac tor y to identify a n individ ual transmitter . Field Communicator T o view the serial numbe r: 1. F rom the Home screen, selec t 2 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 115

    105 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.6 Bo ttom re fe renc e (P010) This is the transmitter’s Bottom Reference setting. It is the distanc e measured v er tically along the ultras onic beam p ath from the u ser p referred sens or referenc e point to th e zer o l e vel of a tan k or an open ch ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 116

    106 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Figure F-1. T ank geo metry Data proc essing seque nce : 1. Echoe s are processed th at occur between Upper Blanking ( P023 ) and Lower Blanking ( P063 ). 2. D910 is de rived from the T arget Ec ho’s Time of Flight and the calcul ated Speed of Sound : D910 = ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 117

    107 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.7 Upper blanking (P023) This define s a zone clo se to the transmitte r wher e echoes are to be ignored. Est ablishing this zone eliminat es echoes from fal se targets such as mounting fittings or the end of stub pipes. Ente r the ve r tical distanc e from ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 118

    108 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.8 Low er bl anking (P063) This define s a zone abo ve the Bottom Reference ( page 10 5 ) where echoes are to be ignored. This zone e limina tes echoes from false targets a t the tank bottom e.g. pump s uncov ered as the liquid le ve l decrea ses. Note  ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 119

    109 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.9 Distance o ffse t (P060) This define s the distance fr om the Sensor R ef ere nce Po int (SRP) to the U ser Pr efe rred Sensor Refer en ce Po i nt ( UP S R P) . Note  See Figure F-1 on page 106 for these points in a tank geometr y illustration. The re ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 120

    110 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.10 Lev e l offset (P069) This defines the distanc e from the T ank Ref ere nce Point (TRP) t o the transmitter’s Bott om Refer en c e. Note  See Figure F-1 on page 106 for these points in a tank geometr y illustration. The rea d-only Lev el / Secondar ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 121

    111 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.11 T a nk shape / non-line ar profile (P011) This selec ts the shap e of a tank o r an open channel, and establ ishes the linear or n on-linear rel ationship bet wee n the live li quid lev el (he ight) and the proc ess value (PV) derived from that lev el. ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 122

    112 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.12 Con te nts (volume) me asure men t There are five sh ape options avail able to select, including:  T ank Shape/NLP (P011) = “ Linear ” (see page 112 )  T ank Shape/NLP (P011) = “ Special Plot ” (see page 112 )  T ank Shape/NLP (P011) = ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 123

    113 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 perc entage of the m aximum PV on the Y-axis. The relat ed perce ntage , say 55%, is en tered in to parame ter Profile Point 6 . The transmitte r will int erpol ate line arly between th e plotted points to giv e an accurate cur ve fit, which wil l dete rmine th ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 124

    114 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Figure F- 3. Graph 1 of PV versu s Height Figure F- 4. Graph 2 of PV versu s Height Y X 0, 0 Maximum Proce ss V alue (PV) Maximum Height (Entered Percentages Relating Output PV to Maxi mum PV) (Fixed P ercentages R elating Height to Maximum Height) 10% 20% 30% ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 125

    115 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 T ank Shape/NLP (P011) = “ Horizontal Cyl Flat ” This Horiz ontal C ylinder With Flat Ends se tting is applicable whe n volume me asure ments are needed from a horiz ontally-orien ted cylindrical tank with a constan t diame te r (see Fig ure F-5 on page 116 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 126

    116 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Figure F-5. Cylindrica l or spherical tank cross-sec tion F. 3 . 1 3 F l o w m e a s u r e m e n t T able F-1 on page 119 li sts the T ank Shape/ Non-Linear Profile ( P011 ) opti ons that select a standard flow structure profile and the conv ersi on (scale) fac ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 127

    117 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Flu mes that dev iate fr om t he sta ndard “3 /2 po wer l aw”, e.g. round-bott omed flumes, must use the “ Special Plot ” profil e option th at is bas ed on flow ve rsus hei ght tabulat ions (see page 112 ). Setting-up procedure for “ Flume/Weir-3/2 ? ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 128

    118 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Setting-up Procedure f or “ V-Notch-5/2 ”: 1. Edit pa ramete r T ank Shape/NLP ( P011 ) to select “ V-Notch-5/2 ”. 2. Ente r the scale factor into the PV S cale F actor p aramete r ( page 121 ). Figure F-7. V-notch cross-section 4–20 mA/HART End View ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 129

    119 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 T able F-1. S tandard flow profile op tions Hmax Scale F ac tor Power Fa c t o r 20 mA Point (1) (1) Where en tries do no t say “(Us er)”, the 20 mA Poin t (Upper R ange V alue) is automa tically s et to the valu e in the mete rs (m) o r fee t/in ches (f t ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 130

    120 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.14 Prim ar y varia ble units (P012) This selects alterna tive display units f or the HART Primar y V ariable (PV), which are then reported to a HART Ma ster Device such a s a Mobrey MCU9 00 Series con trol uni t. Note  Selecting alte rnativ e displ ay u ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 131

    121 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.15 Scale F ac tor / K-F a c tor (P013) Lev el measurement When the process value (PV) is a lev el mea surem ent in metre s, feet, or inche s, this parameter con ve r ts (scales) the lev el mea sureme nt int o alte rnativ e units bef ore being output. En te ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 132

    122 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Mobre y MCU900 Seri es cont rol unit T o view or c hange the scale f ac tor / k-factor: 1. F rom the Main M enu screen, select SE TUP . 2. Select the transmitter (e .g. “ Tx1:MSP400RH ”). 3. Select DUTY . 4. Select PV Scale F ac tor . 5. Follow the on-scree ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 133

    123 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Field Communicator T o view or change the di amete r , maximum height, or powe r factor: 1. F rom the Home screen, selec t 2: Configure . 2. Select 2: Manual Setup . 3. Select 3: Profili ng . 4. Select 5: Non-Linear Profile Heig ht P014 or 5: Po wer F ac tor P0 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 134

    124 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.17 Profile poin ts 1 to 10 (P030 t o P039) These paramete r s are used to define an irregula r-shaped profile f or calculating the pro cess value (PV) from a li ve leve l reading. Note  See page 112 f or examples of how these parameters are used. Field ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 135

    125 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.18 Uppe r range value (P015) This defines the proc es s value (PV) represe nted by a 20 mA output from the t ransmitter . The span of the 4–20 mA current output is defined by the Upper Range V alue paramete r and the Lower R ange V alue parameter ( page ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 136

    126 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.19 Lo we r range value (P016) This defines the proc ess value (PV) re presen ted by a 4 mA output from the transmitt er . The span of the 4 –20 mA curre nt outp ut is defined b y the Upper Range V alue parameter ( page 125 ) and the Lower R ange V alue p ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 137

    127 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.20 Da mping (P020) The damping value is a time constant in seconds, and is applied as smoothing to the level reading and the output curren t. A larger value will have the effect of smoothin g out rapid changes o f leve l, and smooth out the eff ec ts of tu ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 138

    128 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.21 Settin g-up rel ays on the M SP400RH The MS P400RH ha s t wo integral signal re lay s of t ype SPST (Single Po le, Single Thr ow). F .3.22 R ela y 1 (P070 to P072) P070 RL1 Mode P071 RL1 PV On P oint P072 RL1 PV Off P oint On the MS P400RH, RL1 is fac t ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 139

    129 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 attenu ated significantly . In these condition s, the transmitter holds the last valid d ata and transmits a nother pulse to see if the echo is returned. Lost Echo Dela y ( P021 ) defin es the period th at the transmit ter will hold and displa y the prese nt va ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 140

    130 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 5. Select “ Quit ” to exit to the previous menu. F .3.25 Lo st echo ac tion (P022) This defines wha t happens t o the process value (PV) and output cu rrent whe n a “lost echo ” cond ition exists (see page 128 ). “MINIMUM” action The PV is forced t ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 141

    131 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Mobre y MCU900 Seri es cont rol unit T o view or change t he lost echo action: 1. F rom the Main M enu screen, select SE TUP . 2. Select the transmitter (e .g. “ Tx1:MSP400RH ”). 3. Select ENGINEERING . 4. Select LE Action . 5. Follow the on-screen instruc ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 142

    132 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Field Communicator T o view or ch ange the speed of sound se tting: 1. F rom the Home screen, selec t 2: Configure . 2. Select 2: Manual Setup . 3. Select 5: Engineering ( MS P900GH ) or 6: Engineering ( MS P400RH ). 4. Select 4: Speed of Sound P024 . 5. If a c ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 143

    133 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Field Communicator T o vie w or chan ge the te mpera ture se tting: 1. F rom the Home screen, selec t 2: Configure . 2. Select 2: Manual Setup . 3. Select 8: Set T emperature ( MS P900GH ) or 9: Set T emperature ( MS P400RH ). 4. Select 1: T emperature , and th ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 144

    134 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Note  The threshold va lue can be adjust ed in conjun c tion with par ameters Uppe r Blanking ( page 107 ), L ower Bl anking ( page 108 ), Thre shold 1 Time ( pa ge 137 ), and Threshold 1 Siz e ( page 138 ). Field Communicator T o view or change the threshol ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 145

    135 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.29 T ransmit power c o ntrol (P040) The transm itted ultrasonic ener gy can be controlled automatically to avoid strong close echoes saturating the electronics of the transmit ter . Th e live leve l is indicated in the read-only Tr a n s m i t Power pa ram ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 146

    136 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.30 Pulse re peat (P041) The nominal rate of repetition f or ultrasonic pulses from t he transmitter is one pulse per second. If t wo transmitt ers were loca ted within the same tank, it is possible this w ould allow ultr asonic pulses from one u nit to be ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 147

    137 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.32 Threshold 1 time (P043) F alse echoes may occu r close to the tran smitter fac e. If they occur outside the Upper Blanking distance ( page 131 ), t he fa ls e e cho ca n be ig no re d by enter in g t he echo size as a pe rce ntage and a time (re presen ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 148

    138 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.33 Threshold 1 si ze (P048) F alse echo es may occur clo se to the transmitter face . If they occur outside the U pper Blanking distance ( page 131 ), t he fa ls e e cho ca n be ig no re d by enter in g t he echo size as a pe rce ntage and a time (re prese ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 149

    139 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.34 T a rge t pulses (P044) Ta r g e t P u l s e s ( P044 ) is the nu mber of ultrasonic pulses in each burst sent from the transmit te r ever y second. The factory default “ Aut omatic ” setting allo ws the transmit te r to dec ide the number of pulses ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 150

    140 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.35 T arget freque nc y (P045) This set s the frequency used f or transmitting an ultra sonic pulse . The optimum freque ncy depe nds on the characteristics o f the transmitte r’s piezoe lec tric cr ystals, which are af fected by temperatu re. The transmi ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 151

    141 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.36 Spik e re jec tion (P049) This sets the minimu m duration of a valid echo signal, and is u sed to reject transi en t electr ical inter ference ( spike) sig nal s. Note  Spik e rejec tion is switched-off when it is set to 0. Field Communicator T o vie ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 152

    142 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.37 F alse echo da ta (P081 to P088) These paramete rs are the four false echo d a ta recor ds, each st oring a false echo as distance-to-surface (e .g. 1.7 m) and echo siz e (e.g. 44%). The trans mitter ignores these false target echoes. See also :  Sec ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 153

    143 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.38 Cle ar false ec hoes (P089) This is used to clear a specified F alse Echo D ata record, or clear all of the F alse Echo Da ta records. Field Communicator T o cle ar false echo da ta: 1. F rom the Home screen, selec t 2: Configure . 2. Select 2: Manual S ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 154

    144 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.39 T ransduc er m ate rial (P970) This rea d-only paramet er indica tes th e transmitte r’s wet-side ma teri al. Field Communicator 1. F rom the Home screen, selec t 1: Over view . 2. Select 3: Shortcuts , and then se lec t 1: Device Inf ormation . 3. Se ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 155

    145 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Mobre y MCU900 Seri es cont rol unit T o view or ch ange the poll address : 1. F rom the Main M enu screen, select SE TUP . 2. Select the transmitter (e .g. “ Tx1:MSP400RH ”). 3. Select SYSTE M , and then select FIXED . 4. Select HART , and then select Poll ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 156

    146 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .3.42 Minimum te mpe rature (P047) This is a rec ord of the lo west mea sured te mperatur e. Field Communicator 1. F rom the Home screen, selec t 2: Configure . 2. Select 2: Manual Setup . 3. Select 8: Set T emperature ( MS P900GH ) or 9: Set T emperature ( M ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 157

    147 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4 Monitoring and diagno stic par ameters Note  For relevant menu struc tures, refer to Appendix Appendix D: Mobrey MCU900 Se ries or Appendix E: Fie ld Communicat or as appropri ate f or your HART Maste r Device . F .4.1 Proces s value / Primar y variable ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 158

    148 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.2 Lev e l / Secondar y variable (SV) (D901) This indica tes the liv e level me asured b y the transmitte r . In HART te rminology , SV is the Second ar y V ariable . Units are in metres, fee t, or inches depending on ba se units (see pag e 90 ). Note  F ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 159

    149 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.3 Distance / T er tiar y variable (T V) (D902) This indica tes the liv e distance -t o-sur face me asured by the transmitte r . In HART terminology , this parameter is the T ertiar y V ariable (T V). Un its are in metres, f eet, or inches, depe nding on ba ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 160

    150 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.4 T e mpera ture / Four th variable (FV) (D903) This indicates the live ambie nt tempe rature measured b y the transmit ter . In HART te rminology , this parame te r is the Fourth V ariable (FV). Measu reme nt units are in  C or  F depend ing on Base ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 161

    151 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.5 % of out put curre nt (D905) This indicate s the perce ntage of the 4–20 mA output curre nt in us e.  0% re presen ts 4 mA  100% repr esen ts 20 mA Note  When th e Poll Address ( page 163 ) is a non-z ero numbe r , the transmitte r is in mul t ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 162

    152 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.6 Curren t output (D906) This indica tes the actual output curr ent in mA . Note  When th e Poll Address ( page 163 ) is a non-z ero numbe r , the transmitte r is in mul ti- dr op mode and the current output is fixed at 4 mA. Field Communicator T o view ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 163

    153 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.7 Distance (D910) This indicate s the distance from the tra nsm itter fa ce to a detec ted sur fa ce. It is a us eful diagno stic because a false sur face si gnal can be iden tified and rela ted to the ph ysical nature of th e ins ta llati on. Note  Fig ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 164

    154 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.8 Ec ho siz e (D911) The size o f the echo returned from a surface de pe nds on the surface rang e, g as c omposition and tempe rature , transmitte r performance , in-t ank cond itions (turbulence , presenc e of sur fac e foam, and draughts), and o ther fa ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 165

    155 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.9 Ec ho succ es s (D912) This is a measure of the quality of the echo retu rned. It is a pe rce ntage indica ting the succes s rate ac hieved from the last te n pulse transmissions. The succes s rate m ay fall be low 100% due to the effect of extreme surfa ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 166

    156 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.10 T arget echoe s (D913) This indica tes th e number o f echoe s detected b y the transmitt er . The maximum numbe r display e d is seve n. The echo closest t o the transmitter fac e, i.e . the highest liqu id level, is u sed to calculate the PV ( page 14 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 167

    157 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.11 Speed of sound (D914) This indicates the tempe rature-corrected speed of sound calcul ated b y the transmitte r . It rel ates the retu rned echo ti me del ay to a dist anc e. The value is calcula ted using the T emperature SoS Calc value ( page 158 ) an ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 168

    158 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.12 T empe rature f o r SoS calcul ation (D915) This indica tes th e temp era ture us ed in calcul ating the t empe rature -corr ected speed of sound (see above). The t emper ature may be a live or fixed value de pending on the c o nfigura tion of the param ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 169

    159 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.13 F requenc y (D916) This indica tes the tr ansmitte r’ s ac tual oper ating freque nc y . The fac tor y default setting i s to automatically set the operating frequenc y for optimum performance (see T arget F requenc y on page 140 ). Field Communicator ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 170

    160 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.14 Threshold in u se (D917) This indicates the echo strength threshold limi t, below which echoe s are rejected. The fac tor y defa ult setting is t o autom atically se t the thresh old leve l for op timum pe r formanc e (see Set Threshold on page 133 ). F ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 171

    161 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.15 Pulses in u se (D918) This is the actual numbe r of pulse s transmitted in the pre viou s burst of pulses. Note  The factor y default setting is to autom aticall y decide the number of pulses in a burst for optimum per formance (see Ta r g e t P u l ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 172

    162 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.16 T ransmit powe r (D919) This indica tes the le vel o f powe r in use f or ultra sonic pulse trans mission.  The lower the level number , the less power is be ing used  The higher the lev el number , the more powe r being used Note  The fac tor ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 173

    163 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.17 Mode l code (D949) Field Communicator T o view the transmitter model c od e: 1. F rom the Home screen, selec t 1: Over view . 2. Select 3: Shortcuts . 3. Select 1: De vice Information twi c e . 4. Select 1: Identification , and then 2: Model Code D949 . ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 174

    164 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Mobre y MCU900 Seri es cont rol unit T o view the hardware revisio n number: 1. F rom the Main M enu screen, select SE TUP . 2. Select the transmitter (e .g. “ Tx1:MSP400RH ”). 3. Select SYSTE M , FIXED , HART , and the n Hardware R ev . 4. When finished , ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 175

    165 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.20 Manuf ac turer (D960) Field Communicator T o view the manuf ac turer n ame: 1. F rom the Home screen, selec t 2: Configure . 2. Select 2: Manual Setup . 3. Select 4: HART/Identity ( MSP900G H ) or 5: HART/Identit y ( MSP400 RH ). 4. Select 1: Identity , ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 176

    166 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Mobre y MCU900 Seri es cont rol unit T o view the device iden tification number: 1. F rom the Main M enu screen, select SE TUP . 2. Select the transmitter (e .g. “ Tx1: MSP400RH ”). 3. Select SYSTE M , FIXED , HART , and the n Unique ID . 4. When finished , ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 177

    167 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F .4.23 T ransmitter s p ecific c om mand re v . (D963) The revision numbe r of speci fic (non-standar d) HART comm ands suppor ted by the transmitte r . Field Communicator T o view the revision numbe r: 1. F rom the Home screen, selec t 1: Over view . 2. Selec ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 178

    168 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 Mobre y MCU900 Seri es cont rol unit T o view the numbe r of pre amble bytes: 1. F rom the Main M enu screen, select SE TUP . 2. Select the transmitter (e .g. “ Tx1:MSP400RH ”). 3. Select SYSTE M , FIXED , HART , and the n Num Req Preams . 4. When finished ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 179

    169 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 F. 4 . 2 6 P r i m a r y v a r i a b l e t r e n d This indicate s the histor y of PV ch anges. Note  The live PV is alwa ys indicat ed in the read-only p aramete r Process V alue / Primar y Va r i a b l e ( P V ) ( page 147 ). Field Communicator T o view th ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 180

    170 Reference Manu al IP2048/RM, Rev AA Appendix F: Configuring Using HART February 2015 ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 181

    ...

  • Emerson Mobrey MSP400RH and MSP900GH - page 182

    Reference Manual IP2048/RM, Rev AA February 2015 St andard T erms and Conditions of Sale c an be found at www.rose mount.com/t erms_of_sale The Emerson log o is a trademark and s er vice mark o f Emerson Electric Co. Ro semoun t and the Ro semount log ot ype are registered tra demarks of R osem ount Inc. Mobrey and the Mobrey logo t ype are registe ...

Manufacturer Emerson Category Marine Radio

Documents that we receive from a manufacturer of a Emerson Mobrey MSP400RH and MSP900GH can be divided into several groups. They are, among others:
- Emerson technical drawings
- Mobrey MSP400RH and MSP900GH manuals
- Emerson product data sheets
- information booklets
- or energy labels Emerson Mobrey MSP400RH and MSP900GH
All of them are important, but the most important information from the point of view of use of the device are in the user manual Emerson Mobrey MSP400RH and MSP900GH.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Emerson Mobrey MSP400RH and MSP900GH, service manual, brief instructions and user manuals Emerson Mobrey MSP400RH and MSP900GH. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Emerson Mobrey MSP400RH and MSP900GH.

Similar manuals

A complete manual for the device Emerson Mobrey MSP400RH and MSP900GH, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Emerson Mobrey MSP400RH and MSP900GH by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Emerson Mobrey MSP400RH and MSP900GH.

A complete Emerson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Emerson Mobrey MSP400RH and MSP900GH - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Emerson Mobrey MSP400RH and MSP900GH, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Emerson Mobrey MSP400RH and MSP900GH, that we can find in the current document
3. Tips how to use the basic functions of the device Emerson Mobrey MSP400RH and MSP900GH - which should help us in our first steps of using Emerson Mobrey MSP400RH and MSP900GH
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Emerson Mobrey MSP400RH and MSP900GH
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Emerson Mobrey MSP400RH and MSP900GH in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Emerson Mobrey MSP400RH and MSP900GH?

Use the form below

If you did not solve your problem by using a manual Emerson Mobrey MSP400RH and MSP900GH, ask a question using the form below. If a user had a similar problem with Emerson Mobrey MSP400RH and MSP900GH it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)