Manual Hamilton Beach 14010

40 pages 3.03 mb
Download

Go to site of 40

Summary
  • Hamilton Beach 14010 - page 1

    Irons Fer à repasser Planchas 840182704 Le invitamos a leer cuidadosamente este instructivo antes de usar su aparato. READ BEFORE USE À LIRE AVANT UTILISATION LEA ANTES DE USAR English ......................................................................................... 2 USA: 1-800-851-8900 Visit www.hamiltonbeach.com for our complete line o ...

  • Hamilton Beach 14010 - page 2

    When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: READ ALL INSTRUCTIONS BEFORE USING 1. Read all instructions. 2. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or ...

  • Hamilton Beach 14010 - page 3

    3 This appliance is intended for household use only. WARNING! Shock Hazard: This appliance has a polarized plug (one wide blade) that reduces the risk of electric shock. The plug fits only one way into a polarized outlet. Do not defeat the safety purpose of the plug by modifying the plug in any way or by using an adapter. If the plug does not fit f ...

  • Hamilton Beach 14010 - page 4

    Parts and Features MAX Steam OFF Position Steam ON Position 4 Blast of Steam Button Water Fill Opening Adjustable Steam Control Blast of Steam Button Self-Clean Swivel Power Cord Heel Rest Temperature Control Dial Soleplate Spray Trigger Power On Light 840182704 ENv01.indd 4 840182704 ENv01.indd 4 12/20/13 3:08 PM 12/20/13 3:08 PM ...

  • Hamilton Beach 14010 - page 5

    5 This iron is equipped with a position/motion sensor. This means that if the iron is left motionless it will turn off automatically and cool to room temperature. To restart iron, simply move the iron and allow it to reheat on heel position. The iron will reheat to the previously selected setting. Iron Position Resting on soleplate Resting on eithe ...

  • Hamilton Beach 14010 - page 6

    1. Plug the iron into outlet. 2. Set Adjustable Steam Control to 0 (Dry Iron). 3. Turn Temperature Control Dial to desired temperature. Allow 2 minutes for iron to reach desired temperature. 4. To turn iron off, turn Temperature Control Dial to OFF ( O ) and unplug iron. To Dry Iron 6 Iron High Temp Setting Med Temp Setting Low Temp Setting Fabric ...

  • Hamilton Beach 14010 - page 7

    7 1. Unplug iron. Set Adjustable Steam Control to 0 (Dry Iron). Hold iron with soleplate parallel to the ground. 2. Using a cup, slowly pour tap water into water fill opening until MAX fill line is reached. Do not fill iron directly from the faucet. 3. Plug iron into outlet. 4. Turn Temperature Control Dial to desired fabric setting in the steam ra ...

  • Hamilton Beach 14010 - page 8

    8 1. Follow Steps 1 through 5 in “To Steam Iron.” 2. Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror. 3. Hold iron about 6 inches (15 cm) away from garment and press and release the Blast of Steam Button to steam out wrinkles. Do not press Blast of Steam Bu ...

  • Hamilton Beach 14010 - page 9

    9 Power On Light The red light stays on even if Temperature Control Dial is turned to OFF ( O ). Light flashes if position sensor is activated. Blast of Steam Button Push Blast of Steam Button for an extra blast of steam. Adjustable Steam Control This control adjusts the steam to desired steam level. Features 840182704 ENv01.indd 9 840182704 ENv01. ...

  • Hamilton Beach 14010 - page 10

    10 Care and Cleaning Iron Storage 1. The water tank of your iron should be emptied after each use. Turn Temperature Control Dial to OFF ( O ). Unplug the iron and hold over a sink. Slowly tilt pointed end of iron down over sink. Water will run out of water fill opening. 2. After iron has completely cooled, wrap cord loosely around iron and store in ...

  • Hamilton Beach 14010 - page 11

    11 Self-Clean To keep the steam vents clear of any buildup, follow these instructions each time you iron using steam. 1. Set Temperature Control Dial to OFF ( O ). Fill iron with water to 1/2 of its maximum capacity. 2. Set Adjustable Steam Control to 0 (Dry Iron). Set Temperature Control Dial to High temperature setting and let iron heat for 2 min ...

  • Hamilton Beach 14010 - page 12

    12 PROBLEM THINGS TO CHECK Water is leaking Iron won’t steam Leaves spots • Do not overfill the water tank. • If steam ironing, is Adjustable Steam Control in a steam position, the Temperature Control Dial in the steam range, and did the iron have enough time to preheat? • If dry ironing, make sure the Adjustable Steam Control is in the 0 ( ...

  • Hamilton Beach 14010 - page 13

    13 Troubleshooting (cont.) PROBLEM THINGS TO CHECK Iron is too hot/not hot enough • Check Temperature Control Dial and adjust to desired setting level. Let iron cool down 5 minutes before continuing. Fabric Setting Chart NOTE: To prevent possible garment damage, we do not recommend ironing fabrics labeled “Dry Clean Only.” To Iron Off Nylon A ...

  • Hamilton Beach 14010 - page 14

    14 LIMITED WARRANTY This warranty applies to products purchased and used in the U.S. and Canada. This is the only express warranty for this product and is in lieu of any other warranty or condition. This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. During t ...

  • Hamilton Beach 14010 - page 15

    15 MESURES DE SÉCURITÉ IMPORTANTES Pour utiliser un appareil électroménager, vous devez toujours prendre des mesures élémentaires de sécurité pour réduire le risque d’incendie, d’électrocution et/ou de blessure corporelle, en particulier les mesures suivantes : LIRE TOUTES LES INSTRUCTIONS AVANT L’UTILISATION 1. Lire toutes les inst ...

  • Hamilton Beach 14010 - page 16

    Cet appareil est conçu pour une utilisation domestique seulement. AVERTISSEMENT ! Risque d’électrocution : Cet appareil électroménager possède une fiche polarisée (une broche large) qui réduit le risque d’électrocution. Cette fiche n’entre que dans un seul sens dans une prise polarisée. Ne contrecarrez pas l’objectif sécuritaire d ...

  • Hamilton Beach 14010 - page 17

    Pièces et caractéristiques MAX Pour repassage sans vapeur Pour repassage avec vapeur 17 Bouton pour jet de vapeur Orifice de remplissage du réservoir Commande de réglage de vapeur Bouton pour jet de vapeur Autonettoyage Cordon d’alimentation pivotant Talon d’appui Cadran de commandes de température Semelle Gâchette de vaporisation Témoin ...

  • Hamilton Beach 14010 - page 18

    18 Ce fer est doté d’un capteur de positionnement et de mouvement. Ce capteur met automatiquement le fer hors tension lorsqu’il demeure immobile et permet le refroidissement à la température ambiante. Pour réinitialiser le fer, il suffit de le bouger et de le remettre sur son talon pour qu’il se réchauffe. Le fer n’atteindra pas la tem ...

  • Hamilton Beach 14010 - page 19

    1. Brancher la fiche du fer dans la prise murale. 2. Régler la commande de réglage de vapeur à 0 (repassage à sec). 3. Tourner le cadran de commandes de température au degré désiré. Laisser chauffer le fer pendant 2 minutes pour qu’il atteigne la température désirée. 4. Positionner le cadran de commandes de température à OFF (arrêt/ ...

  • Hamilton Beach 14010 - page 20

    20 3. Brancher la fiche du fer dans la prise murale. 4. Tourner le cadran de commandes de température au degré désiré à l’échelle de vapeur. 5. Laisser chauffer le fer pendant 2 minutes pour qu’il atteigne la température désirée. 6. Régler la commande de réglage de vapeur au degré de vapeur désiré. 7. Pour mettre le fer hors tensi ...

  • Hamilton Beach 14010 - page 21

    21 Caractéristiques Témoin d’alimentation Le témoin rouge reste illuminé même si le cadran de commandes de température est à OFF (arrêt/ O ). Le témoin clignote lorsque le capteur de position est activé. Bouton pour jet de vapeur Appuyer sur le bouton pour jet de vapeur pour obtenir un surplus de vapeur. Commande de réglage de vapeur C ...

  • Hamilton Beach 14010 - page 22

    22 Entretien et nettoyage Rangement du fer 1. Toujours vider le réservoir à eau du fer après chaque utilisation. Tourner le cadran de commandes de température en position OFF (arrêt/ O ). Débrancher le fer et le tenir au-dessus de l’évier. Pointer doucement l’extrémité du fer vers le fond de l’évier. L’eau s’écoulera par l’or ...

  • Hamilton Beach 14010 - page 23

    23 Entretien et nettoyage (suite) Autonettoyage Pour garder les évents de vaporisation propres, suivre ces instructions chaque fois que vous utilisez la vapeur du fer. 1. Tourner le cadran de commandes de température à la position OFF (arrêt/ O ). Remplir le fer avec de l’eau jusqu’à la 1/2 de sa capacité ou jusqu’à la ligne MAX. 2. R? ...

  • Hamilton Beach 14010 - page 24

    PROBLÈME POINTS À VÉRIFIER Fuite d’eau Le fer ne dégage pas de vapeur Apparition de taches • Ne pas trop remplir le réservoir d’eau. • Pour le repassage à la vapeur, est-ce que la commande de réglage de vapeur est correctement positionnée, le cadran de commandes de température est-il choisi et est-ce que le fer a eu le temps de pr? ...

  • Hamilton Beach 14010 - page 25

    25 Dépannage (suite) PROBLÈME POINTS À VÉRIFIER Le fer est trop chaud/pas assez chaud • Vérifier le réglage de la température au cadran puis régler au degré désiré. Laisser refroidir environ 5 minutes avant de continuer. Tableau de réglage pour les tissus NOTE : Pour prévenir les dommages accidentels aux vêtements, nous ne recommand ...

  • Hamilton Beach 14010 - page 26

    26 GARANTIE LIMITÉE Cette garantie s’applique aux produits achetés et utilisées aux É.-U. et au Canada. C’est la seule garantie expresse pour ce produit et est en lieu et place de tout autre garantie ou condition. Ce produit est garanti contre tout défaut de matériaux et de main-d’oeuvre pour une période un (1) an à compter de la date ...

  • Hamilton Beach 14010 - page 27

    Cuando utilice artefactos eléctricos, siempre deben seguirse precauciones de seguridad básicas a fin de reducir el riesgo de incendio, descarga eléctrica, y/o lesiones a personas, incluyendo las siguientes: LEA TODAS LAS INSTRUCCIONES ANTES DEL USO 1. Lea todas las instrucciones. 2. Este aparato no se destina para utilizarse por personas (incluy ...

  • Hamilton Beach 14010 - page 28

    GUARDE ESTAS INSTRUCCIONES Este aparato está planeado para uso doméstico. ¡ADVERTENCIA! Peligro de Descarga Eléctrica: Este aparato cuenta con un enchufe polarizado (una pata más ancha) que reduce el riesgo de una descarga eléctrica. El enchufe embona únicamente en una dirección dentro de un tomacorriente polarizado. No trate de obviar el p ...

  • Hamilton Beach 14010 - page 29

    Partes y Características MAX Posición de Vapor APAGADO Posición de Vapor ENCENDIDO 29 Abertura para Llenado de Agua Control de Vapor Ajustable Botón de Ráfaga de Vapor Auto-Limpieza Cable de Corriente Giratorio Descanso de Talón Marcador de Control de Temperatura Suela Gatillo de Rocío Luz de Encendido Botón de Ráfaga de Vapor 840182704 SP ...

  • Hamilton Beach 14010 - page 30

    30 La plancha está equipada con un sensor de posición/movimiento. Esto significa que si la plancha permanece sin movimiento, se apagará automáticamente y se enfriará a temperatura de habitación. Para reiniciar la plancha, simplemente mueva la plancha y deje que se vuelva a calentar en la posición de talón. La plancha se volverá a calentar ...

  • Hamilton Beach 14010 - page 31

    31 Para Planchar con Vapor 1. Conecte la plancha a la toma. 2. Ponga el Control de Vapor Ajustable en O (Planchar en Seco). 3. Gire el Marcador de Control de Temperatura a la temperatura deseada. Deje unos 2 minutos para que la plancha alcance la temperatura deseada. 4. Para apagar la plancha, gire el Marcador de Control de Temperatura a OFF (apaga ...

  • Hamilton Beach 14010 - page 32

    32 3. Conecte la plancha a la toma. 4. Gire el marcador de control de temperatura al ajuste de tela deseado en el rango de vapor. 5. Deje 2 minutos para que la plancha alcance la temperatura deseada. 6. Ponga el Control de Vapor Ajustable en el ajuste de vapor deseado. 7. Para apagar la plancha, ponga el Control de Vapor Ajustable en O (Planchar en ...

  • Hamilton Beach 14010 - page 33

    33 Características Luz de Encendido La luz roja permanece encendida incluso si el Marcador de Control de Temperatura se coloca en OFF (apagado/ O ). La luz parpadea si el sensor de posición es activado. Botón de Ráfaga de Vapor Presione el Botón de Ráfaga de Vapor para una ráfaga de vapor extra. Control de Vapor Ajustable Este control ajusta ...

  • Hamilton Beach 14010 - page 34

    34 Cuidado y Limpieza Almacenaje de la Plancha 1. Se debe de vaciar el tanque de agua de su plancha después de cada uso. Gire el Marcador de Control de Temperatura a OFF (apagado/ O ). Desconecte la plancha y sostenga sobre el lavadero. Lentamente incline con el extremo puntiagudo de la plancha hacia abajo sobre el lavadero. El agua saldrá por la ...

  • Hamilton Beach 14010 - page 35

    35 Cuidado y Limpieza (cont.) Auto-Limpieza Para mantener las ventilas de vapor libres de cualquier acumulación, siga estas instrucciones cada vez que planche usando el vapor. 1. Ponga el Marcador de Control de Temperatura a OFF (apagado/ O ). Llene la plancha con agua hasta 1/2 de su máxima capacidad. 2. Ponga el Marcador de Control de Vapor Aju ...

  • Hamilton Beach 14010 - page 36

    • No llene de más el tanque de agua. • Si plancha con vapor, ¿está el Control de Vapor Ajustable en posición de vapor, el Marcador de Control de Temperatura en el rango de vapor, y tuvo la plancha suficiente tiempo para precalentarse? • Si plancha en seco, asegúrese de que el Control de Vapor Ajustable esté en posición de PLANCHADO EN ...

  • Hamilton Beach 14010 - page 37

    37 Tabla de Ajuste Según Tela NOTA: Para prevenir un posible daño a la prenda, no recomendamos planchar telas etiquetadas con “Lavar en Seco Solamente”. Para Planchar Apagado Nylon Acrílico Seda Poliéster Rayón Lana Algodón Lino Instrucciones para Planchar Ajuste de Vapor Planchado en seco por el lado incorrecto de la tela. Planchado en s ...

  • Hamilton Beach 14010 - page 38

    38 Grupo HB PS, S.A. de C.V. Monte Elbruz 124-301 Colonia Palmitas, Delegación Miguel Hidalgo C.P. 11560, México, Distrito Federal 01 800 71 16 100 PRODUCTO: MARCA: MODELO: Grupo HB PS, S.A. de C.V. cuenta con una Red de Centros de Servicio Autorizada, por favor consulte en la lista anexa el nombre y dirección de los establecimientos en la Repú ...

  • Hamilton Beach 14010 - page 39

    39 b) Cuando el producto no hubiese sido operado de acuerdo con el instructivo de uso. c) Cuando el producto hubiese sido alterado o reparado por personas no autorizadas por Grupo HB PS, S.A. de C.V. el fabricante nacional, importador o comercializador responsable respectivo. El consumidor puede solicitar que se haga efectiva la garantía ante la p ...

  • Hamilton Beach 14010 - page 40

    Modelos: 14010, 14011, 14014 Características Eléctricas: 120V~ 60Hz 1200W Tipo: I75 12/13 840182704 Los modelos incluídos en el instructivo de Uso y Cuidado pueden ir seguidos o no por un sufijo correspondiente a una o varias letras del alfabeto y sus combinaciones, separadas o no por un espacio, coma, diagonal, o guión. Como ejemplos los sufij ...

Manufacturer Hamilton Beach Category Iron

Documents that we receive from a manufacturer of a Hamilton Beach 14010 can be divided into several groups. They are, among others:
- Hamilton Beach technical drawings
- 14010 manuals
- Hamilton Beach product data sheets
- information booklets
- or energy labels Hamilton Beach 14010
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hamilton Beach 14010.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hamilton Beach 14010, service manual, brief instructions and user manuals Hamilton Beach 14010. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hamilton Beach 14010.

A complete manual for the device Hamilton Beach 14010, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hamilton Beach 14010 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hamilton Beach 14010.

A complete Hamilton Beach manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hamilton Beach 14010 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hamilton Beach 14010, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hamilton Beach 14010, that we can find in the current document
3. Tips how to use the basic functions of the device Hamilton Beach 14010 - which should help us in our first steps of using Hamilton Beach 14010
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hamilton Beach 14010
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hamilton Beach 14010 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hamilton Beach 14010?

Use the form below

If you did not solve your problem by using a manual Hamilton Beach 14010, ask a question using the form below. If a user had a similar problem with Hamilton Beach 14010 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)