English dropdown-ico

Manual Craftsman 315.10136

15 pages 0.59 mb
Download

Go to site of 15

Summary
  • Craftsman 315.10136 - page 1

    Operator's Manual 1/2 in. HAMMER DRILL Double Insulated Model No. 315.101360 Save this manual for future reference ,A CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 • Safety • Features • Operation • Maintenance • Parts List Sears, Roebuck and C ...

  • Craftsman 315.10136 - page 2

    • Table of Contents ..................................................................................................................................................... 2 • General Safety Rules ............................................................................................................................................ 2-3 • Sp ...

  • Craftsman 315.10136 - page 3

    Tool Use and Care • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is d ...

  • Craftsman 315.10136 - page 4

    Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Additional Rules for Safe Operation • Know your power tool. Read operator's manual carefull ...

  • Craftsman 315.10136 - page 5

    Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternati ...

  • Craftsman 315.10136 - page 6

    KNOW YOUR HAMMER DRILL See Figure I. Before attempting to use your hammer drill, familiarize yourself with all operating features and safety requirements. See Figure 1. _i CAUTION: Carefully read through this entire operator's manual before using your new drill. Pay close attention to the Rules For Safe Operation, Warnings, and Cautions. If yo ...

  • Craftsman 315.10136 - page 7

    SWITCH See Figure 2. To turn your hammer drill ON, depress the switch trigger. Release switch trigger to turn your hammer drill OFF. LOCK-ON BUTTON See Figure 2. Your hammer drill is equipped with a "lock-on" feature, which is convenient when continuous drilling for extended periods of time is required. To lock-on, depress the switch trig ...

  • Craftsman 315.10136 - page 8

    • Form a loop by forcing end with round holes through slotted hole opposite end. • Place the loop over the cord and pull it tight. • Mount the chuck key by inserting the geared end through the hole in the holder. Large keys in the larger hole, smaller keys in the small hole. VARIABLE SPEED See Figure 5. Your hammer drill has a variable speed ...

  • Craftsman 315.10136 - page 9

    To Adjust: • To adjust, loosen the auxiliary handle assembly by turning the handle counterclockwise. • Rotate auxiliary handle assembly to desired operating position. • Securely tighten by turning the auxiliary handle clockwise. USING DEPTH GAGE ROD See Figure 7. Note: When installing depth gage rod, align teeth on depth gage rod with the tee ...

  • Craftsman 315.10136 - page 10

    TO INSTALL BITS See Figure 9. • Unplug your hammer drill. ,_ WARNING: Failure to unplug hammer drill your could result in accidental starting causing serious injury. • Open or close the chuck jaws to a point where the opening is slightly larger than the drill bit you intend to use. Also, raise the front of your drill slightly to keep the drill ...

  • Craftsman 315.10136 - page 11

    DRILLING See Figure 11. • Depress and release switch trigger to be sure your drill is in OFF position before connecting it to power supply. • Check the direction of rotation lever for correct setting (forward or reverse). See Figure 3. • Secure the material to be drilled in a vise or with clamps to keep it from turning as the drill bit rotate ...

  • Craftsman 315.10136 - page 12

    CHUCK REMOVAL See Figure 12. The chuck must be removed in order to use some accessories. To remove: • Unplug your drill. _k WARNING: Failure to unplug your drill could result in accidental starting causing serious injury. • Insert a 8 mm (5/16 in.) or larger hex key into the chuck of your drill and tighten chuck jaws securely. • Tap the hex k ...

  • Craftsman 315.10136 - page 13

    GENERAL Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer. All other parts represent an important part of the double insulation system and should be serviced only at a Sears Service Center. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types ...

  • Craftsman 315.10136 - page 14

    The following recommended accessories are currently available at Sears retail stores. • High Speed Bits (For wood or metal) • Masonry Bits • Wood Boring Bits • Hole Saws • 1/2 in. Chuck (9-2980) 1/2 in. Max. 3/4 in. Max. 1-1/2 in. Max. 2-1/2 in. Max. _IL WARNING: The use of attachments or accessories not listed might be hazardous. _, WARN ...

  • Craftsman 315.10136 - page 15

    Page 15 ...

Manufacturer Craftsman Category Drill

Documents that we receive from a manufacturer of a Craftsman 315.10136 can be divided into several groups. They are, among others:
- Craftsman technical drawings
- 315.10136 manuals
- Craftsman product data sheets
- information booklets
- or energy labels Craftsman 315.10136
All of them are important, but the most important information from the point of view of use of the device are in the user manual Craftsman 315.10136.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Craftsman 315.10136, service manual, brief instructions and user manuals Craftsman 315.10136. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Craftsman 315.10136.

Similar manuals

A complete manual for the device Craftsman 315.10136, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Craftsman 315.10136 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Craftsman 315.10136.

A complete Craftsman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Craftsman 315.10136 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Craftsman 315.10136, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Craftsman 315.10136, that we can find in the current document
3. Tips how to use the basic functions of the device Craftsman 315.10136 - which should help us in our first steps of using Craftsman 315.10136
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Craftsman 315.10136
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Craftsman 315.10136 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Craftsman 315.10136?

Use the form below

If you did not solve your problem by using a manual Craftsman 315.10136, ask a question using the form below. If a user had a similar problem with Craftsman 315.10136 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)