-
Pentax AF-360FGZ - page 1
AUT O ZOOM ELECTRONIC FLASH UNIT OPERA TING MANUAL Please read this operating manual carefully first for proper use. 01 _ Cover _ 1 . fm Page 0 Tuesday , June 13 , 2006 12:08 PM ...
-
Pentax AF-360FGZ - page 2
Thank you for purchasing the PENT AX Auto-flash AF360FGZ. In addition to easy daylight sy nc photography with TTL auto, the AF360FGZ also allows wireless TTL auto (P-TTL auto) photography and high-speed sync. It is clip-on type flash which enables accurate focus adjustments even in dark locations with built -in AF-assist spotbeam. Bundled Items The ...
-
Pentax AF-360FGZ - page 3
1 FOR SAFE USE OF YOUR FLASH UNIT Although we have carefully pro duced this flash unit for safe operation, please be sure to especially follow warnings and cautions given on page 2. WA R N I N G This mark indicates precautions t hat, if not followed, could result in serious injury to the user . CAUTION This mark indicates precautions that, if not f ...
-
Pentax AF-360FGZ - page 4
2 W ARNING The flash contains electronic circuits that operate at high voltages. Do not attempt to disassemble the flash unit yourself, as there is danger of an electric shock. If internal parts of the flash unit becomes exposed due to impact, etc., do not touch them as there is danger of an electric shock. Do not expose the flash unit to water or ...
-
Pentax AF-360FGZ - page 5
3 Precautions for Y our Flash Unit l Never use organic solvents such as paint thinner , alcohol or benzene to clean the flash unit. l Avoid leaving the flash unit fo r extend period in places w here the humidity and temper ature are very high such as in a car . l Be careful not to subject the flash unit to strong vibrati ons, shock or pressure. Use ...
-
Pentax AF-360FGZ - page 6
4 n Cautions Regarding Batteries l This flash unit uses 4 AA-size alkaline, lithium, or nickel metal hydride bat teries. Do not use any other type of batteries. The flash unit may not be able to operate correctly or demonstrate su fficient performance, or the flash unit itself may generate heat, de pending on the type of batteries used. l AA-size a ...
-
Pentax AF-360FGZ - page 7
5 T able of Contents FOR SAFE USE OF YOUR FLASH UNIT ........... 1 Precautions for Your Flash Unit ....................... 3 Cautions Regarding Batteries . ............... ............. 4 Names of Parts ................................................... 6 LCD Panel Indicator ............. .................. ............. 8 Inserting the Batt eries ...
-
Pentax AF-360FGZ - page 8
6 Names of Part s Bounce angle adjustment LCD panel Flash mode button Select button Adjustment dial LCD panel illumination button/ Format button Zoom button/ Channel button T est button/ Modeli ng button/ Ready lamp Setting switch Power switch Wireless mode switch Sync mode switch Bounce lock rele ...
-
Pentax AF-360FGZ - page 9
7 @ T Y > S V G R " W [ K Q 00 _ AF360FGZ . book Page 7 Tuesday , June 13 , 2006 12:09 PM ...
-
Pentax AF-360FGZ - page 10
8 n LCD Panel Indicator Zoom indicator : A.Zoom Ý M.Zoom xxmm = 20, 24, 28, 35, 50, 70, 85 (35 mm format) 35, 45, 55, 70, 100, 13 5, 150 (645 format) 55, 60, 70, 90, 120, 18 0, 190 (67 format) 13, 16, 19, 24, 34, 48, 58 (Digital camera) Format indicator : 35mm Ý 645 Ý 67 Flash mode indicator : P-TTL Ý A Ý M Ý SB Flash exposure ...
-
Pentax AF-360FGZ - page 11
9 When in poorly lit locations and the LCD panel cannot be seen, pressing the LCD panel illumination button (LIGHT) will illuminate th e panel for about 10 seconds. Pressing it again will turn off the illumination. l The camera's LCD p anel li ghts up also when you press the LCD illuminat ion button (LIGHT) and the exposure metering timer is o ...
-
Pentax AF-360FGZ - page 12
10 Inserting the Batteries Slide the battery chamber cover as shown in the figure to open. Insert four AA-size batte ries, making sure the plus/minus marking ( + , - ) match the diagram inside the battery chamber cover . 1 2 00 _ AF360FGZ . book Page 10 Tuesday , June 13 , 2006 12:09 PM ...
-
Pentax AF-360FGZ - page 13
11 T ypes of Batteries This flash unit uses four AA- size batteries of the same type, as shown below . - Alkaline battery (LR6) - Lithium battery (FR6) - Nickel-Metal Hydri de battery (Ni-MH) (Nickel manganese (Ni-Mn) and nickel cadmium (Ni- Cd) batteries cannot be used.) l For information about r ecycling times and tot al number of flashes, refer ...
-
Pentax AF-360FGZ - page 14
12 Mounting to Camera Remove the hot shoe co ver from the camera. Attach the flash unit to the camera. T urn the locking lever of the flash unit in the direction opposite to that indicated by (FIX Ý ) (clockwise from the direction of the LCD panel). Slide the hot shoe bracket of the flash unit into the camera's hot shoe from the back ...
-
Pentax AF-360FGZ - page 15
13 T urning the Power On Sliding the power switch to the (ON) position will turn on the power . The ready lamp will light up when the flash is charged. Sliding it to the (OFF) position will turn off the power . If charging time takes more than 20 seconds, the batteries have been exhausted and should be replaced with new batteries. If the flash unit ...
-
Pentax AF-360FGZ - page 16
14 n Auto Power Off Function When the flash unit is left unused for about 3 minutes with the power switch set to the (ON) position, it automatically turns off to save the power . l In the auto flash mode (A ), the power will turn off after about 6 minutes. l In the wireless mode, the power will turn off after about 1 hour of non-operation. n Quick ...
-
Pentax AF-360FGZ - page 17
15 Select Button (S)/Adjustment Dial Functions 4 types of settings are available as s hown on the following pages for the sele ct button (S) and the adjustment dial. Procedure Press the select button (S ) so that the number to adjust blinks. T urn the adjustment dial and adjust the blinking number . 1 2 00 _ AF360FGZ . book Page 15 Tuesday ...
-
Pentax AF-360FGZ - page 18
16 After adjustment, press th e select button (S) and stop the blinking. Adjust the other items below using the same procedure. l When using multiple flash units set to P-TTL or TTL Auto and adjusting the amount of light at the same time, use the camera’ s exposure compensation. 3 Connected Flash Mode Adjustment Range Flash exposure compensat ...
-
Pentax AF-360FGZ - page 19
17 Camera Format and Flash Coverage Angle The AF360FGZ’s flash coverage angle can be adjusted to match the angle of view of the lens being used, which enables effective distri bution of the flash light. The flash coverage angle is indicated by the focal lengths of available lenses in the LCD panel of the flash unit, according to the pres et image ...
-
Pentax AF-360FGZ - page 20
18 Zoom position (Flash coverage angle) setting Next, set the zoom (flash coverage angle) to match the focal length of the lens you are using. Auto Zoom (A.Zoom) If both the camera and lens are autofocus, you can automatically set the flash coverage angle according to the focal length of the lens by pressing the shutter release button of the camera ...
-
Pentax AF-360FGZ - page 21
19 Zoom Positions by Camera format * With the wide-angle panel l When the wide-angle p anel is used, the zoom button (ZOOM) will not work. (The wide-angle panel is in a slit on the top of the flash head. Pull it out so that it covers th e front of the flash head. If the catchlight panel is not necessary , leave it in the slit.) 35mm camera 645 came ...
-
Pentax AF-360FGZ - page 22
20 35mm Camera 645 Camera 67 Camera Digital Camera 00 _ AF360FGZ . book Page 20 Tuesday , June 13 , 2006 12:09 PM ...
-
Pentax AF-360FGZ - page 23
21 l In the (A.Zoom) mode, th e flash coverage angle will be adjusted automati cally to suit the lens focal length when you press the shutter release button halfway , and the camera exposure metering timer is on. l A warning signal appears as follows when the flash cannot cover the focal length of the camera. - The zoom indicator blinks for the com ...
-
Pentax AF-360FGZ - page 24
22 Using the Flash Modes The AF360FGZ has the followi ng flash modes. Select the mode best suited for the subject. Before photographing, confirm the following. 1. Whether your camera su pports the desired flash mode. Ý Cameras that Support Each Flash Mode (Page 57) 2. Whether you can use the desired function with the combination of your camera and ...
-
Pentax AF-360FGZ - page 25
23 n P-TTL Auto Flash Refer to page 22 for the feat ures and conditions of use of this flash mode. Procedure T urn on the flash unit. Press the flash mode button (MODE) until (P-TTL) is displaye d on the LCD panel. Set the sync mode switch to leading curtain sync ( ), trailing curt ain sync ( ), or contrast-control ( ), according to the subject. (R ...
-
Pentax AF-360FGZ - page 26
24 n TTL Auto Flash Refer to page 22 for the features and conditions of use of this flash mode. Procedure T urn on the flash unit. Press the flash mode button (MODE) until (TTL) is displayed on the LCD panel. Set the sync mode switch to leading curtain sync ( ), trailing curtain sync ( ), or contrast-control ( ), according to the subject. (Refer to ...
-
Pentax AF-360FGZ - page 27
25 n Auto Flash Refer to page 22 for the feat ures and conditions of use of this flash mode. 00 _ AF360FGZ . book Page 25 Tuesday , June 13 , 2006 12:09 PM ...
-
Pentax AF-360FGZ - page 28
26 Procedure T urn on the power switch. Press the flash mode butto n (MODE) until (A) is displayed on the LCD panel. Set the aperture value and ISO. Press the select button (S) so that (f/stop) on the LCD panel blinks. T urn the adjustment dial to set the aperture value. l The effective flash range is displayed on the LCD panel bar graph. ? ...
-
Pentax AF-360FGZ - page 29
27 n Manual Flash Refer to page 22 for the feat ures and conditions of use of this flash mode. Procedure T urn on the power switch. Press the flash mode bu tton (MODE) to display (M) (1/xx) on the LCD panel. l Y ou can set the flash output from 1/1 to 1/32. See pag e 1 5 . Set the zoom position . (The setting method differs according to your camera ...
-
Pentax AF-360FGZ - page 30
28 Confirm that the subject is within the effective flash range and the ready la mp is lit. Then take a picture. l In the following cameras, if the correct flash output is obtained, the fl ash mode indicator and ( ) in the viewfinder will blink. 645, LX, MZ-M/ZX-M For details, refer to “Auto Check Display” on pag e 9 . 5 00 _ AF360FGZ . book Pa ...
-
Pentax AF-360FGZ - page 31
29 Using the Sync Mode The AF360FGZ has the foll owing sync modes. Select the mode best suited for the subject. Before photographing, confirm the following. 1. Whether your camera su pports the desired sync mode. Ý Cameras that Support Each Sync Mode (Page 59) 2. Whether you can use the desired sync mode with the combination of your camera and the ...
-
Pentax AF-360FGZ - page 32
30 n Leading Curt ain Sync Mode Refer to page 29 for the features and conditions of use of this sync mode. Procedure Set the power switch to the (ON) position. Set the sync mode switch to leading curtain sync () . Confirm that the subject is within the effective flash range and the ready la mp is lit. Then take a picture. n T railing Curt ain Sync ...
-
Pentax AF-360FGZ - page 33
31 n High-Speed Sync Mode Refer to page 29 for the feat ures and conditions of use of this sync mode. l As can be seen in the tabl e on p age 81, the guide number becomes smaller as the shutter speed becomes faster in hi gh-speed synch mode. Accordingly , it should be noted that the distance for taking pictures would become s horter . Procedure T u ...
-
Pentax AF-360FGZ - page 34
32 Check the flash range by looking at the bar graph on the LCD panel. Confirm that the subject is within the effective flash range and the ready la mp is lit. Then take a picture. l Please read the camera operating manual for camera operation. l High-speed sync is possible with the camera separated (wireless) from the AF360GZ. (Refer to page 43.) ...
-
Pentax AF-360FGZ - page 35
33 n Contrast Control Sync Flash Refer to page 29 for the feat ures and conditions of use of this sync mode. l Refer to “Connecting the AF360FGZ with the Extension Cord” on page 56 on using the AF360FGZ detached from the camera. Procedure T urn on the power switch. Set the sync mode switch to contrast-control () . Set the zoom position . (The s ...
-
Pentax AF-360FGZ - page 36
34 With a single flash l If you are using a single flash unit, you can only perform leading curtain sync photography when the sync mode switch is set to contrast-control () . With contrast control sync flash 00 _ AF360FGZ . book Page 34 Tuesday , June 13 , 2006 12:09 PM ...
-
Pentax AF-360FGZ - page 37
35 Advanced Functions n Wireless Mode With the AF360FGZ, you can take photographs with the flash unit separated from the camera wirelessly in P-TTL mode. Combine the flash unit with th e built-in flash unit of the camera or another AF360FGZ attached to the camera. l The AF540FGZ can be used interchangeably with AF360FGZ flash units for wireless mod ...
-
Pentax AF-360FGZ - page 38
36 l Control Flash and Main Flash The purpose of the control flash of the wireless mode is to send informati on to the other flash unit before taking a pict ure. The main flash fires at the actual time a pictur e is taken in the same manner as traditionally done. l When setting up a flash unit separately from the camera, use the off-camer a shoe ad ...
-
Pentax AF-360FGZ - page 39
37 l The AF360FGZ can be u sed in comb ination with a built-in flash unit only when used with the following cameras. *ist D, *ist, MZ-S, MZ-L/ZX-L/MZ-6 Using the AF360FGZ in Combination with a Built-in Flash Unit ŔŦŵŵŪůŨġŴŸŪŵŤũ 00 _ AF360FGZ . book Page 37 Tuesday , June 13 , 2006 12:09 PM ...
-
Pentax AF-360FGZ - page 40
38 Firstly , set the wireless mode and channel of the AF360FGZ, and register the channel on the camera. T urn the camera off and then att ach the AF360FGZ to the hot shoe of the camera. Set the power switch of the flash unit to (WIRELESS). Set the wireless mode switch to (S), so that SLA VE is displayed in t he upper right corner of the ...
-
Pentax AF-360FGZ - page 41
39 (Preparation of Flash Unit Att ached to Camera) Firstly , set the wireless mode and channel of the AF360FGZ attached to the camera, and register the channel on the camera. Attach the AF360FGZ to the hot shoe of the camera after turning the camera off. Set the power switch of the flash unit to (WIRELESS). Set the wireless mode swit ch ...
-
Pentax AF-360FGZ - page 42
40 When you turn the came ra on and press the shutter release butt on halfway down, the channel of the flash uni t is registered on the camera. (Preparation of Sep arated Flash Unit) Next, set the channel of the separated (wireless) flash unit to the same channel as the flash unit attached to the camera. Place the other AF360FGZ in the desi ...
-
Pentax AF-360FGZ - page 43
41 (Preparation of Flash Unit Att ached to Camera) Firstly , set the wireless mode and channel of the AF360FGZ attached to the camera, and register the channel on the camera. Attach the AF360FGZ to the hot shoe of the camera after turning the camera of f. Set the power switch of the flash unit to (WIRELESS). Set the wireless mode swit c ...
-
Pentax AF-360FGZ - page 44
42 Slide the setting switch back up to the (white dot). When you turn the came ra on and press the shutter release butt on halfway down, the channel of the flash uni t is registered on the camera. (Preparation of Sep arated Flash Unit) Next, set the channel of the separated (wireless) flash unit to the same channel as the flash unit attache ...
-
Pentax AF-360FGZ - page 45
43 (Using the AF360FGZ in Combination with a Built-in Flash Unit) Firstly , set the wireless mode and channel of the AF360FGZ, and register the channel on the camera. T urn the camera off and then attach the AF360FGZ to the hot shoe of the camera. Set the power switch of the flash unit to (WIRELESS). Set the wireless mode switch to (S), ...
-
Pentax AF-360FGZ - page 46
44 When you turn the camera on and press the shutter release butt on halfway down, the channel is registered on the camera. Next, remove the flash unit from the camera and place it in the desired position. l Press the flash mode butt on (MODE) to display (P-TTL) if the flash mode was set to the modes other than P-TTL. Set the zoom position. (Re ...
-
Pentax AF-360FGZ - page 47
45 (Using the AF360FGZ in Combination with another AF360FGZ) First, set the wireless mode and channel of the AF360FGZ attached to the camera, and register the channel on the camera. T urn the camera off and then attach the AF360FGZ to the hot shoe of the camera. Set the power switch of the flash unit to (WIRELESS). Set the wireless mode ...
-
Pentax AF-360FGZ - page 48
46 Slide the setting switch back up to the (white dot). When you turn the camera on and press the shutter release butt on halfway down, the channel is registered on the camera. Next, set the channel of the separated (wireless) flash unit to the same c hannel as the flash unit attached to the camera. Place the other AF360FGZ in the desir ...
-
Pentax AF-360FGZ - page 49
47 n Slave With the AF360FGZ, you can take photographs with the flash unit separated from the camera wirelessly in auto or manual mode. Combine the flash unit with th e built-in flash unit of the camera or another flash uni t attached to the camera. Before photographing, confirm the following. 1. Whether you can use th is function with the combinat ...
-
Pentax AF-360FGZ - page 50
48 Set the zoom position to suit the subject and place the flash unit at the desired location. l When setting up a flash unit separately from the camera, use the off-camer a shoe adapter F when using a tripod, or the off-camera shoe clip CL-10 when setting up in another location such as tabletop, chair , etc. T urn the flash unit on the camera on. ...
-
Pentax AF-360FGZ - page 51
49 n Slave Mode Setting T o properly control the slave flash, it is necessary to set the slave mode settings. Procedure Slide the setting switch up. Press the LCD panel illu mination button (LIGHT) for 2 seconds or more. SLA VE1 will be displayed. Pressing the select butt on (S) switches between 1 and 2. l The flash will not fire prop erly if the s ...
-
Pentax AF-360FGZ - page 52
50 n Slow-Speed-Sync Photography When using a normal flash to photograph a subject in a night or evening setting, the background will appear very dark because a normal flash light cannot sufficiently light it. However , it is possible to balance both subject and background by using the flash to properly expose the foreground subject and a slow shut ...
-
Pentax AF-360FGZ - page 53
51 n Bounce Flash With the AF360FGZ, you can ti lt the flash head to aim at the ceiling or wall to bounce the flash before it reaches the subject. Doing so creates softer light and shadows to make the pictur e look more natural. Bouncing the flash will decreas e the flash intensity by the time it reaches the subjec t. Therefore, this function is ef ...
-
Pentax AF-360FGZ - page 54
52 l A click stop is provided for each bounce angle. l T o change the angle, mo ve the flash head of the flash unit while pressi ng the bounce lock release button. l When using bounce flash, ( ) will be displayed on the LCD panel. l The effective flash range will blink only when the bounce angle is set at -10 ° . l It is recommended to set the bou ...
-
Pentax AF-360FGZ - page 55
53 n AF Spotbeam The AF360FGZ features a built-in red spotbeam projector to assist the auto focus system in dim light and low-contrast conditions. When using the flash with autofocus camera in dark co nditions, the spotbeam will be projected automatically depending on the ambient lighting conditions. This function is activated only when the camera ...
-
Pentax AF-360FGZ - page 56
54 n Wide-Angle Panel and Catchlight Panel The AF360FGZ has a built-in wide-angle panel and catchlight panel at th e top of the flash head. Execute the following if necessary . Pull out both the wide-angl e panel and catchlight panel. S tore the panel you are not using. . l When storing the wide-angle pa nel, push it inward while holding the catchl ...
-
Pentax AF-360FGZ - page 57
55 n Modeling Flash/T est Flash Before taking the picture, fi ring a modeling flash helps you to see how shadows ar e cast on the subject. Modeling Flash Slide the setting switch down (yellow dot). Check that the ready lamp is lit, then press the modeling button (MODELING) . The flash will fire continuously for one second. After firing the modeling ...
-
Pentax AF-360FGZ - page 58
56 n Connecting the AF360FGZ with the Extension Cord When using the AF360FGZ separately from the camera connected by an ex tension cord, use the optional extension cord F5P . Attach the extension cord F5P to the camera using the optional hot shoe adapter F G or the optional hot shoe adapter F (refer to the diagram on the right). l When using the AF ...
-
Pentax AF-360FGZ - page 59
57 Supported Functions for Pent ax Cameras n Cameras that Support Each Flash Mode Cameras that support each of t he flash modes are listed below . Please note that functions related to each flash mode differ . Refer to "Functions Related to Each Flash Mode" (page 61 - 68). Flash Mode Camera Notes P-TTL Auto Flash (P-TTL) *ist DL2, *ist DS ...
-
Pentax AF-360FGZ - page 60
58 TTL Auto Flash (TTL) 67 2 - In trailing curtain sync or contrast control sync mode, the flash mode will automatically be switched to (TTL) when you press the shutter release button halfway down, even if you have set it to manual (M). 645N 2 , 645N, Z/PZ series, MZ/ZX series (except MZ-M/ ZX-M), SFX N /SF1 N , SFX/SF1 - When the exposure mode is ...
-
Pentax AF-360FGZ - page 61
59 n Cameras that Support Each Sync Mode Cameras that support each of t he sync modes are listed below . Please note that the conditions under wh ich they can be used differ depend ing on camera type and settings. For details, refer to the restrictions reference pages. Sync Mode Camera Restrictions Reference Page Leading curtain sync ( ) All Pent a ...
-
Pentax AF-360FGZ - page 62
60 n Cameras that Support Wireless Mode Y ou can use the slave flash instead, if your camera does not support wireless mo de. In this case, the available flash modes are auto and manual (page 47). Function Camera Notes Wireless Mode () Digital single lens reflex cameras *ist DL2, *ist DS2, *ist DL, *ist DS, *ist D - When photographing in wireless m ...
-
Pentax AF-360FGZ - page 63
61 n Cameras that Support Slow-Speed-Sync Mode n Functions Related to Each Flash Mode Supported flash modes and sync modes differ for each camera model. Refer to the following table. (Y es: usable, # : usable under certain conditions, No: unusable, -: Flash mode not supported) * Where the flash mode is set to SB (AF spotbeam), the flash unit will n ...
-
Pentax AF-360FGZ - page 64
62 1. Cameras that Suppor t P-TTL Auto Flash Mode * 1 : For the *ist DS2, *ist DS, and *ist D, when the exposure mode is automatic, it will switch to (P-TTL) or (TTL) while the exposure meter of the camera is on. For details, see p age 57. * 2 : For T ype A, only *ist D can perform wireless mode photography in combination with a built-in flash unit ...
-
Pentax AF-360FGZ - page 65
63 2. Cameras that Support TTL Auto Flash Mode <Film cameras (35mm autofocus si ngle lens reflex cameras)> * 1 : Only when combined with cameras provided with red-eye reduction. * 2 : Only when the AF360FGZ is detached from the camera and connected by an extension cord. T ype A: MZ-60/ZX-60, MZ-5 N /ZX-5 N , MZ-30/ZX-30, MZ-7/ZX-7, Z-1/PZ-1, ...
-
Pentax AF-360FGZ - page 66
64 <Film cameras (medium format)> T ype D: 67 2 T ype E: 645 N 2 , 645 N T ype F: 645 Flash Mode (P-TTL) P-TTL auto flash photography (TTL) TTL auto flash photography (A) auto flash photography (M) manual flash photography (SB) AF spotbeam Camera type (D), (E), (F) (D) (E) (F) (D) (E) (F) (D) (E) (F) (D) (E) (F) Leading curtain sync - Y es Y ...
-
Pentax AF-360FGZ - page 67
65 <Film cameras (35mm manual focu s single lens reflex cameras)> T ype G: LX T ype H: Super A/Super Program Flash Mode (P-TTL) P-TTL auto flash photography (TTL) TTL auto flash photograph y (A) auto flash photography (M) manual flash photography (SB) AF spotbeam Camera type (G), (H) (G) (H) (G) (H) (G) (H) (G), (H) Leading curtain sync - Y e ...
-
Pentax AF-360FGZ - page 68
66 3. Cameras that Does not Suppo rt P-TTL and TTL Auto Flash Mode <Film cameras (35mm autofocus single lens reflex cameras)> T ype A: SF7/SF10 Flash Mode (P-TTL) P-TTL auto flash photography (TTL) TTL auto flash photograph y (A) auto flash photography (M) manual flash photography (SB) AF spotbeam Camera type (A) (A) (A) (A) (A) Leading curta ...
-
Pentax AF-360FGZ - page 69
67 <Film cameras (35mm manual focus sing le lens reflex camera, 67 camera)> * 1 : Slow-speed-sync with B (bulb expos ure) for the A3Date and A3DateS. * 2 : Except ME. T ype B: MZ-M/ZX-M T ype C: P30T , P30N/P3N, P30, P50/P5, A3 Date, A3DateS, Program A/Program Plus T ype D: ME, ME-Super , MG , ME-F/MEF , MV1/MV Flash Mode (P-TTL) P-TTL auto f ...
-
Pentax AF-360FGZ - page 70
68 T ype E: 35mm single reflex cameras other than those in T ype A to D, 67 camera Flash Mode (P-TTL) P-TTL auto flash photography (TTL) TTL auto flash photograph y (A) auto flash photography (M) manual flash photography (SB) AF spotbeam Camera type (E) (E) (E) (E) (E) Leading curtain sync - - Y es Y es - T railing curtain sync - - No No - Slow-spe ...
-
Pentax AF-360FGZ - page 71
69 n Sync Mode Restrictions Leading Curt ain Sync Photography ( ) This sync mode can be used with all Pentax single lens reflex cameras pr ovided with a hot shoe. However , there are restrictions depending on came ra type and settings. T railing Curtain Sync Photography ( ) Cameras that support this sync mode are as follows. The shutter speeds that ...
-
Pentax AF-360FGZ - page 72
70 *1: The minimum shutter speed va ries depending on the focal leng th of the lens you are using. *2: The minimum shutter speed va ries depending on ambient light. l Under the following condition, the flash mode automatically switches to P-TTL auto flash: the flash mode is set to manual flash (M), and th e sync mode is set to trailing curt ain syn ...
-
Pentax AF-360FGZ - page 73
71 Contrast Control Sync Photography ( ) Flash units that support this sync mode are as follows. However , the flash modes, cameras, and camera shutter speeds that can be used differ depending on the flash unit. Set the shutter speed to the speed shown in the shutter speed column below . Flash Unit Flash Mode Camera Model AF360FGZ, AF540FGZ, built- ...
-
Pentax AF-360FGZ - page 74
72 *1: The minimum shutter speed va ries depending on the focal leng th of the lens you are using. *2: The minimum shutter speed va ries depending on ambient light. l The flash mode automatically switches to P-TTL auto un der the following condition: When the flash mode is set to ma nual flash (M), and the sync mode is set to contrast control sync ...
-
Pentax AF-360FGZ - page 75
73 High-Speed-Sync Mode Photography ( ) Cameras that support this sync mode are as follows. Be sure to set your came ra according to the following settings: - Shutter speed: faster than flash unit's X-sync speed - Exposure mode: Tv (Shutter Priority), Av (Aperture Priority), M (manual) Exposure modes other than the ab ove are not compatible wi ...
-
Pentax AF-360FGZ - page 76
74 Slow-Speed-Sync Photography Restrictions Be sure to set the camera as follows. Y ou cannot perform slow-speed-sync photogr aphy with settings other than B (Bul b Exposure) with the following cameras: - Cameras that are not capable of setting the shutter speed slower than the flash X-sync speed - Cameras in which the shutte r speed is automatical ...
-
Pentax AF-360FGZ - page 77
75 MZ-S, MZ-5 N /ZX-5 N , MZ-3, MZ-5/ZX-5, MZ-M/ZX-M, Z-50P , Program A/ Program Plus P (Programmed AE) and Av (Aperture Priority) modes MZ-50/ZX-50 PICT and Av (Aperture Priority) modes MZ-30/ZX-30 , Av (Aperture Priority) modes MZ-10/ZX-10 Auto picture, PICT , and Av (Aperture Priority) modes Z-1P/PZ-1P , Z-5P , Z-5, Z-1/PZ-1 HyP (Hyper Program), ...
-
Pentax AF-360FGZ - page 78
76 n Precautions When Photographing with a Slave Flash l Be sure to set the camera as follows: - Exposure mode: M (manual) or B (Bulb Exposure) * Exposure modes other than those above are no t compatible with this photographic method. l Set the slave mode of the flash unit to SLA VE2 (refer to page 49). 00 _ AF360FGZ . book Page 76 Tuesday , June 1 ...
-
Pentax AF-360FGZ - page 79
77 Flash Effective Range n Calculating the Flash Effective Range When setting the lens to m anual f/stop, calculate the guide number at full flash wi th the use of flash's zoom position and ISO. Divide th e resulting guide number by the aperture in use. Thus , the maximum distance is obtained. The minimum distanc e is obt ained in dividing thi ...
-
Pentax AF-360FGZ - page 80
78 The shooting distance parameters will be displayed on the LCD panel. Make sure th at you are within the flash effective range before ta king pictures. l The effective flash rang e is displayed for the following camera and lens combinations. If the maximum distance exceeds 22 meters, ( ) will light up. If the minimum distance is 0.7m or less, ( ) ...
-
Pentax AF-360FGZ - page 81
79 n Guide Number (GN) Guide numbers indicate flash light intensity . The larger the number , the farther you can reach with your flash. From the guide number , you can easily obtain the proper aperture setting required for an optimum exposure. l Depending on the camera and lens you are using, the effective flash range may be displayed. (Refer to p ...
-
Pentax AF-360FGZ - page 82
80 ISO Flash light intensity Camera format Zoom position 35mm 85mm 70mm 50mm 35mm 28mm 24mm *20mm 645 150mm 135mm 100mm 70mm 55mm 45mm *35mm 67 190mm 180mm 120mm 90mm 70mm 60mm *55mm DIGIT AL 58mm 48mm 34mm 24mm 19mm 16mm *13mm ISO200 1/1 50.9 46.7 42.4 35.4 31.1 29.7 19.8 1/2 35.4 32.5 29.7 25.5 22.6 21.2 14.1 1/4 25.5 23.3 21.2 17.7 15.6 14.8 9.9 ...
-
Pentax AF-360FGZ - page 83
81 High-Speed Sync Guide Number *With the wide-angle panel attached ISO Shutter speed Camera format Zoom position 35mm 85mm 70mm 50mm 35mm 28mm 24mm *20mm DIGIT AL 58mm 48mm 34mm 24mm 19mm 16mm *13mm ISO100 250 16.0 14.7 13.4 1 1.1 9.8 9.4 6.2 500 12.7 1 1.6 10.6 8.8 7.7 7.4 4.9 1000 9.5 8.7 7.9 6.6 5.8 5.5 3.7 2000 6.9 6.4 5.8 4.8 4.2 4.1 2.7 4000 ...
-
Pentax AF-360FGZ - page 84
82 n P-TTL and TTL Auto Flash Effective Range (Unit: m) Camera format Zoom position ISO 100 ISO 200 35mm 20mm 24mm 28mm 35mm 50mm 70mm 85m m 20mm 24mm 28mm 35mm 50mm 70mm 85mm 645 35mm 45mm 55mm 70mm 100mm 135mm 150mm 35mm 45mm 55mm 70mm 100mm 135mm 150mm 67 55mm 60mm 70mm 90mm 120mm 180mm 190mm 55mm 60mm 70mm 90mm 120mm 180mm 190mm DIGIT AL 13mm 1 ...
-
Pentax AF-360FGZ - page 85
83 (Unit: m) Camera format Zoom position ISO 400 35mm 20mm 24mm 28mm 35mm 50mm 70mm 85mm 645 35mm 45mm 55mm 70mm 100mm 135mm 150mm 67 55mm 60mm 70mm 90mm 120mm 180mm 190mm DIGIT AL 13mm 16mm 19mm 24mm 34mm 48mm 58mm f/stop f/1.2 2.3 - 23.3 3.5 - 35.0 3.7 - 36.7 4.2 - 41.7 5.0 - 50.0 5.5 - 55. 0 6.0 - 60.0 f/1.4 2.0 - 20.0 3.0 - 30.0 3.1 - 31.4 3.6 ...
-
Pentax AF-360FGZ - page 86
84 Optional Accessories A number of dedicated accessories are available for this flash unit. Off-camera Shoe Clip CL-10 Setting clip for using the AF360FGZ as a wireless slave flash. Hot Shoe Adapter F G Adapter for using the AF360F GZ as a separate flash unit using the extension cord F5P . It can be used in combination with the built-in flash unit ...
-
Pentax AF-360FGZ - page 87
85 Specifications Ty p e Clip-on, TTL auto zoom flas h unit with serial control Guide No. ISO 100 ISO 200 Maximum 36 (ISO 100/m) In manual mode, six-step adju stment from M1/1 to M1/32. The focal lengths in the table below are for 35 mm single lens reflex cameras. (when using 35mm format camera) *Wide-angle panel used Focal Length (Zoom position) 8 ...
-
Pentax AF-360FGZ - page 88
86 (ISO 400) Flash duration (1/2 peak each) (M1/1) flash: Approx. 1/1200 sec. (TTL) Fastest duratio n time: Approx. 1/20000 sec. Recycling time/T otal number of flashes Consecutive Discharge Approx. 2 frames/sec. for 50 ti mes, at M 1/16 output (with using AA-size alkaline LR-6 batteries) Flash Coverage Angle Auto zoom enabled with autofocus comp a ...
-
Pentax AF-360FGZ - page 89
87 Flash modes P-TTL auto, TTL auto, auto, manual. Flash exposure compensation In P-TTL mode, -3.0 to +1.0 levels (0.5 step increments) Flash output setting Wireless master, slave: (1/1 Ý 2/3 Ý 1/2 Ý 1/3) Manual: (1/1 Ý 1/2 Ý 1/4 Ý 1/8 Ý 1/16 Ý 1/32) Flash sync mode Leading curtain sync, T railin g curtain sync, Contrast co ntrol sync, High ...
-
Pentax AF-360FGZ - page 90
88 MEMO 00 _ AF360FGZ . book Page 88 Tuesday , June 13 , 2006 12:09 PM ...
-
Pentax AF-360FGZ - page 91
89 MEMO 00 _ AF360FGZ . book Page 89 Tuesday , June 13 , 2006 12:09 PM ...
-
Pentax AF-360FGZ - page 92
90 MEMO 00 _ AF360FGZ . book Page 90 Tuesday , June 13 , 2006 12:09 PM ...
-
Pentax AF-360FGZ - page 93
91 W arranty Policy All Pentax cameras purcha sed through authorized bona fide photographic distribution ch annels are guar anteed against defects of material or workmans hip for a period of twelve mont hs from date of purchase. Se rvice will be rendered, and defective parts will be replaced without co st to you within that peri od, provided the eq ...
-
Pentax AF-360FGZ - page 94
92 This warranty policy does not af fect customer’s statutory rights. The local warranty policie s available from Pentax distribu tors in some countr ies can supersede this warranty policy . Therefore, we recommend that y ou review the warranty ca rd supplied with your product at the time of purchase, or contact the PENT AX distributor in your co ...
-
Pentax AF-360FGZ - page 95
93 Information on disposal for users Used electric/electronic eq uipment must be treated separately and in accordance wi th legislation that requires proper treatment, recovery an d recycling of these products. Following the implementation by member states, private households within the EU st ates may return their used electrical/electronic equipme ...
-
Pentax AF-360FGZ - page 96
PENT AX Corporation 2-36-9,Maeno-cho, Itabashi-ku, T okyo 174-8639, JAP AN (http://www .pentax.co.jp/) PENT AX Europe GmbH (European Headquarters) Julius-V osseler-S trasse, 104, 22527 Hamburg, GERMANY (HQ - http://www .pentaxeurope.com) (Germany - http://www .pentax.de) PENT AX U.K. Limited Pentax House, Heron Drive, Langley , Slough, Berks SL3 8P ...
Do you have a question concerning Pentax AF-360FGZ?
Use the form below
If you did not solve your problem by using a manual Pentax AF-360FGZ, ask a question using the form below. If a user had a similar problem with Pentax AF-360FGZ it is likely that he will want to share the way to solve it.