Manual Siemens 9000006261(8401)

29 pages 2.82 mb
Download

Go to site of 29

Summary
  • Siemens 9000006261(8401) - page 1

            ...

  • Siemens 9000006261(8401) - page 2

    ...

  • Siemens 9000006261(8401) - page 3

    en Index Safety instructions 4 . . . . . . . . . . . . . Getting to know your appliance 6 . . W ater softener 7 . . . . . . . . . . . . . . . . Filling the special salt container 8 . . Filling the rinse-aid container 9 . . . . Unsuitable dishes 10 . . . . . . . . . . . . . Arranging crockery , glasses, etc. in the dishwasher 1 1 . . . . . . . . . . ...

  • Siemens 9000006261(8401) - page 4

    en 4 Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Do not use a damaged appliance, but consult your supplier . Please dispose of packaging material properly . The corrugated cardboard consists mainly of waste paper . The polystyrene moulded parts have been foamed wi ...

  • Siemens 9000006261(8401) - page 5

    en 5 In daily use W arning Knives and other utensils with sharp points must be placed in the baskets either flat or with the points downwards. Use the dishwasher only in the household and only for its designed purpose, i.e. for washing domestic dishes. Do not lean or sit on the open door . The appliance could tip. The water in the appliance is not ...

  • Siemens 9000006261(8401) - page 6

    en 6 Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. Individual positions are referred to in the text. Control panel 1 Main switch 2 Door handle 3 PROGRAMME END indicator 4 LOW SAL T indicator * 5 LOW RINSE-AID indicator * 6 Programme buttons * on applicable m ...

  • Siemens 9000006261(8401) - page 7

    en 7 W ater softener In order to rinse dishes and glasses satisfactorily , the dishwasher requires soft water , i.e. containing little or no lime, otherwise water stains will be left behind on crockery and glasses, etc. If the tap water exceeds a certain level of hardness, it must be softened, i.e. decalcified, so that it can be used in the dishwas ...

  • Siemens 9000006261(8401) - page 8

    en 8 Filling the special salt container How the salt works While washing is taking place, salt is automatically rinsed out of the salt container into the water softener where it dissolves the lime in the water . The dissolved lime is pumped out of the dishwasher . The water softening system is then ready for the next load. This process of regenerat ...

  • Siemens 9000006261(8401) - page 9

    en 9 Filling the rinse-aid container The purpose of a rinse-aid is to prevent the formation of water marks on tableware and utensils, and to ensure that glasses are clean and sparkling. The rinse-aid is consumed during the washing process. Fold back the lid on the rinse-aid container 29 . T o open the lid, press the mark on the rinse-aid lid and si ...

  • Siemens 9000006261(8401) - page 10

    en 10 Unsuitable dishes Y ou should not clean the following items in your dishwasher: Cutlery and dishes made of wood. They will leach out and become unsightly; the utilised adhesives are also not suitable for the dishwasher temperatures. Delicate décor glasses, craft dishes and vases, special antique or irreplaceable dishes. These décor items ar ...

  • Siemens 9000006261(8401) - page 11

    en 11 Arranging crockery , glasses, etc. in the dishwasher Loading the dishwasher Scrape off any large amounts of left-over food. It is not necessary to rinse the dishes under running water . Place objects in the dishwasher in such a way that items such as cups, glasses, pots/pans, etc. are stood upside down, curved items, or those with recesses, s ...

  • Siemens 9000006261(8401) - page 12

    en 12 Baking sheet spray head * * some models Y ou can clean large baking sheets or grilles with the baking sheet spray head. T o do this, remove the top basket and insert the spray head as illustrated in the diagram. T o ensure that the spray jet can reach all parts, arrange the baking sheets as illustrated (max. 2 baking sheets and 2 grilles). Sh ...

  • Siemens 9000006261(8401) - page 13

    en 13 Small accessories holder* * some models Light-weight plastic accessories, e.g. cups, lids, etc. can be held securely in the small accessories holder . Adjusting position of basket * * not on all models The top basket can be inserted on either its upper or lower rollers, according to requirement. This enables more height to be gained for bigge ...

  • Siemens 9000006261(8401) - page 14

    en 14 T o raise the basket, take hold of the basket on the upper edge and pull upwards. Before you re-insert the basket, ensure that it is at the same height on both sides. Otherwise, the appliance door cannot be closed and the upper spray arm will not connect to the water circuit. Detergents Information about detergents Y ou can use any brand of l ...

  • Siemens 9000006261(8401) - page 15

    en 15 Detergent compartment with measuring marks The side of the detergent compartment is marked with lines to help you determine how much powder to add. The capacity of the detergent container is 15 ml up to the bottom line and 25 ml up to the middle line. When the compartment is full it contains 40 ml. 40 ml 25 ml 15 ml Important If the lid on th ...

  • Siemens 9000006261(8401) - page 16

    en 16 Reduce costs! If your dishes are only moderately dirty , you may be able to use less detergent than recommended. Close the lid on the detergent compartment. Press down the lid (1) until it clicks shut (2). If you are using detergent in tablet form, read the manufacturer’s recommendations on the packaging in order to determine where the tabl ...

  • Siemens 9000006261(8401) - page 17

    en 17 Programme overview This overview lists the max. possible number of programmes. The programmes supplied with your appliance are indicated on the fascia. T ype of crockery e.g. china, pots/pans, cutlery , glasses, etc. T ype of food remains Amount of food remains Condition of food remains Wash programme Programme sequence Non- delicate Mixed So ...

  • Siemens 9000006261(8401) - page 18

    en 18 W ashing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher , selecting a programme that operates at the next lowest temperature will usually suffice. Programme specifications The programme specifications can be found in the summary of instructions. Programme specifications refer to normal conditions. G ...

  • Siemens 9000006261(8401) - page 19

    en 19 Programme interruption Carefully open the door , it could happen that water splashes out of the appliance. Only open completely when the spray arm no longer turns. If the programme is already in “drying” mode, an acoustic signal reminds you to close the appliance door or to abort the programme. Switch OFF the main switch 1 . Indicator lig ...

  • Siemens 9000006261(8401) - page 20

    en 20 Maintenance and care Y ou can help prevent faults by checking and maintaining your appliance regularly . This will save time and reduce problems. Therefore you should occasionally examine the inside of your dishwasher . Overall condition of the appliance Check the rinsing compartment for grease and limescale deposits. If you find any deposits ...

  • Siemens 9000006261(8401) - page 21

    en 21 Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings . Inspect the nozzles in the spray arms for blocked holes due to remnants of food. If necessary , pull the lower arm 23 upwards and lift it off. Unscrew the upper spray arm 22 . Clean both spray arms under running ...

  • Siemens 9000006261(8401) - page 22

    en 22 Caution Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment damage as well as danger to the user . ... with the appliance itself Lower spray arm rotates with difficulty Spray arm is blocked by small items or food remains. Lid in detergent compartment cannot be cl ...

  • Siemens 9000006261(8401) - page 23

    en 23 ... with the dishes, cutlery , etc. Remnants of food are stuck to the dishes, cutlery , etc. Dishwasher was not loaded properly . Jets of water could not reach all parts of the dishes, etc. T oo many items in the rack. Items in the rack were touching each other . Not enough detergent was added to dispenser . Selected wash programme was not in ...

  • Siemens 9000006261(8401) - page 24

    en 24 Customer Service Please call your local service agent, if you are not able to resolve any problem yourself. The name of your nearest service agent is shown in the Customer Service address list. When you call, please provide details of the model number (1) and the production (FD) number (2) which are shown on the nameplate on the appliance doo ...

  • Siemens 9000006261(8401) - page 25

    en 25 General Built-under and integrated appliances which are subsequently installed as free-standing appliances must be secured to prevent them from falling over , e.g. by screwing them to the wall or by installing them under a continuous worktop which is screwed to the adjoining units. For Swiss version only: The appliance can be installed withou ...

  • Siemens 9000006261(8401) - page 26

    en 26 Fresh water connection Using the enclosed parts, connect the fresh water connection to the tap according to the installation instructions. Ensure that the fresh water connection is not kinked, crushed or twisted. When replacing the appliance, always connect a new water supply hose to the water supply . The old supply hose must not be re-used. ...

  • Siemens 9000006261(8401) - page 27

    en 27 en Subjekt to modification ...

  • Siemens 9000006261(8401) - page 28

    ...

  • Siemens 9000006261(8401) - page 29

                 ? ...

Manufacturer Siemens Category Dishwasher

Documents that we receive from a manufacturer of a Siemens 9000006261(8401) can be divided into several groups. They are, among others:
- Siemens technical drawings
- 9000006261(8401) manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens 9000006261(8401)
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens 9000006261(8401).

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens 9000006261(8401), service manual, brief instructions and user manuals Siemens 9000006261(8401). Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens 9000006261(8401).

Similar manuals

A complete manual for the device Siemens 9000006261(8401), how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens 9000006261(8401) by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens 9000006261(8401).

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens 9000006261(8401) - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens 9000006261(8401), FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens 9000006261(8401), that we can find in the current document
3. Tips how to use the basic functions of the device Siemens 9000006261(8401) - which should help us in our first steps of using Siemens 9000006261(8401)
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens 9000006261(8401)
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens 9000006261(8401) in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens 9000006261(8401)?

Use the form below

If you did not solve your problem by using a manual Siemens 9000006261(8401), ask a question using the form below. If a user had a similar problem with Siemens 9000006261(8401) it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)