Manual Miele km 2034/2035

52 pages 1.44 mb
Download

Go to site of 52

Summary
  • Miele km 2034/2035 - page 1

    Operating and installation instructions Gas hobs KM 2014 KM 2034 / 2035 KM 2052 KM 2054 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 07 181 160 e n-G B ...

  • Miele km 2034/2035 - page 2

    G This appliance can be used in countries other than those specified on the appliance. It is, however, set up for connection to the gas and electricity supplies in the countries specified. For use in other countries please contact the Miele spare parts or customer service department in your country. D Das Gerät ist auch für den Gebrauch in andere ...

  • Miele km 2034/2035 - page 3

    Gas-heated appliances Safety precautions to take if you smell gas ß Turn off the gas emergency control valve immediately. This is usually located near the gas meter. ß Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches. ß Do not operate electrical lights or switches, i.e. do not switch them &quo ...

  • Miele km 2034/2035 - page 4

    Guide to the appliance .............................................5 Models ...........................................................5 Burner ...........................................................9 Warning and Safety instructions ....................................1 0 Caring for the environment .........................................1 7 ...

  • Miele km 2034/2035 - page 5

    Models KM 2014 a Wok burner b Small burner cd Medium burners Controls: e Front right f Rear right g Rear left h Front left Guide to the appliance 5 ...

  • Miele km 2034/2035 - page 6

    KM 2034 / KM 2035 a Large burner b Small burner cd Medium burners e Wok burner Controls: f Front right g Rear right h Middle i Rear left j Front left Guide to the appliance 6 ...

  • Miele km 2034/2035 - page 7

    KM 2052 a Wok burner b Small burner c Large burner de Medium burners Controls: f Front right g Rear right h Middle i Rear left j Front left Guide to the appliance 7 ...

  • Miele km 2034/2035 - page 8

    KM 2054 ad Wok burners b Small burner c Large burner e Medium burner Controls: f Front right g Rear right h Middle i Rear left j Front left Guide to the appliance 8 ...

  • Miele km 2034/2035 - page 9

    Burner Wok burner Small, medium and large burners a Burner ring b Burner cap c Burner head d Burner base e Ignition safety device f Ignitor Guide to the appliance 9 ...

  • Miele km 2034/2035 - page 10

    This appliance complies with all relevant local and national safety requirements. Improper use of the appliance can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and using it for the first time. They conta ...

  • Miele km 2034/2035 - page 11

    Safety with children ~ This appliance is only intended for use by adults who have read these instructions. This appliance is not a toy! To avoid the risk of injury, keep children well away and do not let them play with it or use the controls. They will not understand the potential dangers posed by it. They should be supervised whenever you are work ...

  • Miele km 2034/2035 - page 12

    Technical safety ~ Before installation, check the appliance for visible signs of damage. Do not install and use a damaged appliance. It could be dangerous. ~ The electrical safety of this appliance can only be guaranteed if correctly earthed. It is most important that this basic safety requirement is observed and tested regularly, and where there i ...

  • Miele km 2034/2035 - page 13

    ~ During installation, maintenance and repair work, the appliance must be disconnected from the gas supply and mains electricity supply. ~ While the appliance is under guarantee, repairs should only be undertaken by a service technician authorised by Miele. Otherwise the guarantee is invalidated. ~ Faulty components must only be replaced by genuine ...

  • Miele km 2034/2035 - page 14

    Correct use ~ The appliance gets hot when in use and remains hot for quite a while after it has been switched off. Do not touch it whilst it could still be hot. ~ If a cooker hood is installed above the gas hob, ensure that the burners are always covered with a pan when in use. Otherwise flames could reach the cooker hood, parts of which could then ...

  • Miele km 2034/2035 - page 15

    ~ Do not heat up unopened tins of food on the hob as pressure will build up in the tin, causing it to explode. This could result in injury and scalding or damage. ~ Make sure all the components of the gas burners have been correctly assembled before switching on. ~ Pans must be the correct size for the burner they are used on (see "Suitable pa ...

  • Miele km 2034/2035 - page 16

    ~ Spray canisters, aerosols and other inflammable substances must not be stored in a drawer under the hob. Cutlery inserts must be heat-resistant. ~ Always ensure that food is sufficiently cooked or reheated. Some foods may contain micro-organisms which are only destroyed by thorough cooking at a sufficiently high temperature for long enough. There ...

  • Miele km 2034/2035 - page 17

    Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation. Disposal of your old appli ...

  • Miele km 2034/2035 - page 18

    Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service" section of this booklet. Cleaning for the first time ^ Remove any protective foil and adhesive labels. ^ Clean all removable parts of the burners with a solution of warm water and a little washing-up liqu ...

  • Miele km 2034/2035 - page 19

    The control is used to ignite the burner and to regulate the strength of the flame. The burners can only be switched on by pressing in the appropriate control and turning it anti-clockwise, and switched off by turning the control clockwise. The outer flame ring on the wok burner can only be switched on and off by pressing the control in and turning ...

  • Miele km 2034/2035 - page 20

    Switching on ^ The control for the burner required must be pressed in and turned anti-clockwise to the largest flame symbol to switch on. Pressing a burner control will automatically create a spark on all burners. This is normal and no cause for concern. ^ When the flame ignites, keep the control pressed in for 8-10 seconds, and then let it go. ^ I ...

  • Miele km 2034/2035 - page 21

    Regulating the flame Regulate the flame so that it does not spread out beyond the sides of the pan. As the outer part of the flame is much hotter than the centre, the tips of the flames should stay beneath the pan base. Flame tips which extend beyond the sides of the pan merely warm up the air in the room and can also damage pan handles and increas ...

  • Miele km 2034/2035 - page 22

    Burner Min. pan base diameter in cm Small burner 10 Medium burner 12 Large burner 14 Wok burner 14 Max. diameter at top of pan in cm Small burner 22 Medium burner 22 Large burner 24 Wok burner 24 – Refer to the chart above and ensure that the pan diameter falls within the minimum and maximum diameters given for the burner you are using. A pan whi ...

  • Miele km 2034/2035 - page 23

    – Remember when purchasing new pans that manufacturers usually refer to the diameter at the top of the pan in their documentation. – Use a pan lid whenever possible to minimise heat loss. When placing pans on the pan support(s) make sure you position them so that they cannot tip up. Please note that it is not possible to prevent pans from wobbl ...

  • Miele km 2034/2035 - page 24

    This appliance is fitted with a thermoelectric ignition safety device which cuts off the supply of gas to a burner if the flame goes out, for example if food has boiled over, or if there was a sudden draught. ^ To use the burner again, turn the control clockwise to the " ß " position, and then switch it back on as normal. The safety cut- ...

  • Miele km 2034/2035 - page 25

    For Miele branded and cleaning and conditioning products see “Optional accessories”. , Do not use a steam cleaning appliance to clean this appliance. The steam could reach electrical components and cause a short circuit. – The appliance should be cleaned after each use. Allow the appliance to cool down to a safe temperature before cleaning. ? ...

  • Miele km 2034/2035 - page 26

    Cleaning Intructions Stainless steel surfaces Clean stainless steel surfaces using an E-Cloth (see "Optional accessories") or with a solution of warm water and a little washing-up liquid applied with a soft sponge. If necessary, you could use Miele ceramic and stainless steel hob cleaner (see "Optional accessories") and the scou ...

  • Miele km 2034/2035 - page 27

    To assemble the small, medium and large burners ^ Place the burner head c onto the burner base d so that the the ignition safety device e , the ignitor f and the retaining pins g fit into their respective holes in the burner head. ^ Position the burner cap b onto the burner head c so that the retaining pins fit into their respective recesses. Gentl ...

  • Miele km 2034/2035 - page 28

    To assemble the wok burner ^ Place the burner head c onto the burner base d so that the holes fit over the jets in the burner base and the locating bar in the notch. If the burner head is correctly in position, it does not move about. ^ Replace the burner ring a so that the notches are in line above each other. ^ Replace the burner cap b . Importan ...

  • Miele km 2034/2035 - page 29

    , Repairs to the gas and electrical components of this appliance must only be carried out by a suitably qualified and competent person to ensure safety (Gas Safe registered in the UK). Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. What to do if ... ... the burner does ...

  • Miele km 2034/2035 - page 30

    ... the ignitor on the burner does not spark. – check whether the mains fuse has tripped. If it has, contact a qualified electrician or the Miele Service Department. – Check whether food deposits have lodged themselves between the ignitor and the burner cap. Remove any food deposits carefully (see "Cleaning and care"). – food has ad ...

  • Miele km 2034/2035 - page 31

    Miele offer a comprehensive range of useful accessories as well as cleaning and conditioning products for your appliance. These products can be ordered online at: or from Miele (see back cover for contact details) Cleaning products Ceramic and stainless steel hob cleaner 250 ml Removes heavy soiling, limescale deposits and light discolouration Stai ...

  • Miele km 2034/2035 - page 32

    Fit the wall units and extractor hood before fitting the hob to avoid damaging the surface. ~ The room in which the gas hob is installed must be at least 20 m 3 in size with a door or window in it which can be opened to the outside air. ~ The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C heat-resis ...

  • Miele km 2034/2035 - page 33

    Safety distance above the hob A minimum safety distance must be maintained between the hob and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details. If the manufacturer's instructions are not available for the cooker hood, a minimum safety distance of at least 760 mm must be main ...

  • Miele km 2034/2035 - page 34

    Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear and a tall unit or wall at one side. On the other side, however, no unit or divider should stand higher than the hob (see illustrations). The following minimum distances should be adhered to for safety reasons: – 100 mm to the right or left of ...

  • Miele km 2034/2035 - page 35

    KM 2014 a Front b Casing depth c Gas connection R 1/2" ISO 7-1 (DIN EN 10226) d Mains connection box with mains connection cable, L = 2000 mm Appliance and building-in dimensions 35 520 35 650 c b 243 75 54 196 c 0 50 0 30 560 480 - 490 + - 1 d a 217 ß R4 15 ...

  • Miele km 2034/2035 - page 36

    KM 2034 / KM 2035 a Front b Casing depth c Gas connection R 1/2" ISO 7-1 (DIN EN 10226) d Mains connection box with mains connection cable, L = 2000 mm Appliance and building-in dimensions 36 520 35 750 b 0 50 560 480 - 490 - + 1 c ß R4 15 243 75 54 196 d a 217 c 0 30 ...

  • Miele km 2034/2035 - page 37

    KM 2052 / KM 2054 a Front b Casing depth c Gas connection R 1/2" ISO 7-1 (DIN EN 10226) d Mains connection box with mains connection cable, L = 2000 mm Appliance and building-in dimensions 37 c 0 50 ß R4 860 480 - 490 35 900 b 520 0 30 393 25 54 196 c d a 217 15 - + 1 ...

  • Miele km 2034/2035 - page 38

    Preparing the worktop ^ Make the worktop cut-out following the dimensions applicable. Remember to maintain a minimum safety distance from the back wall , as well as from any tall unit or side wall to the right or left of the hob. See "Safety instructions for installation". ^ Seal the cut surfaces with a suitable heat-resistant sealant to ...

  • Miele km 2034/2035 - page 39

    General installation tip Do not use any sealant unless expressly instructed to do so. The sealing strip under the edge of the top part of the appliance provides a sufficient seal for the worktop. Do not use sealant between the frame of the top part of the hob and the worktop. This could cause difficulties if the hob ever needs to be taken out for s ...

  • Miele km 2034/2035 - page 40

    All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplie ...

  • Miele km 2034/2035 - page 41

    Important The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system, which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested and where there is any doubt, the electrical wiri ...

  • Miele km 2034/2035 - page 42

    , Connection to the gas supply, or conversion from one type of gas to another, should only be undertaken by an approved and registered gas installer in strict accordance with local and national safety and building regulations (e.g. Gas Safe registered in the UK). Every appliance should have its own easily accessible isolating valve and test point. ...

  • Miele km 2034/2035 - page 43

    Connection The gas connection must be installed so that connection can be made either from inside or outside the kitchen unit, and the isolating valve must be easily accessible and visible (by opening one of the kitchen doors, if necessary). After installing the appliance the gas burners have to be set for local conditions. When the gas hob has bee ...

  • Miele km 2034/2035 - page 44

    Nominal ratings for all gas types with the burner full on Burner Gas type KM 2014 KM 2034 / KM 2035 / KM 2052 kW g/h kW g/h Small burner Natural gas Liquid gas 1.0 1.0 - 73 1.0 1.0 - 73 Medium burner Natural gas Liquid gas 1.75 1.75 - 127 1.75 1.75 - 127 Large burner Natural gas Liquid gas - - - - 2.6 2.6 - 189 Wok Natural gas Liquid gas 4.2 4.2 - ...

  • Miele km 2034/2035 - page 45

    Nominal rating at low setting Burner Gas type KM 2014 KM 2034 / KM 2035 / KM 2052 / KM 2054 kW kW Small burner Natural gas Liquid gas 0.25 0.25 0.25 0.25 Medium burner Natural gas Liquid gas 0.35 0.35 0.35 0.35 Large burner Natural gas Liquid gas - - 0.50 0.60 Wok Natural gas Liquid gas 0.30 0.37 0.30 0.37 Burner ratings 45 ...

  • Miele km 2034/2035 - page 46

    Jet table , Connection to the gas supply, or conversion from one type of gas to another, should only be undertaken by an approved and registered gas installer in strict accordance with local and national safety and building regulations (e.g. Gas Safe registered in the UK). When converting to a different type of gas, the main burner jet and the smal ...

  • Miele km 2034/2035 - page 47

    Changing the jets Disconnect the gas hob from the electricity supply by switching off at the socket or by disconnecting the mains fuse. To change the main jets Small, medium and large burners ^ Remove burner cap b and burner head c . ^ Using an M7 socket spanner, unscrew the main jet h ^ Fit the correct jets securely (see jet table). ^ Finally secu ...

  • Miele km 2034/2035 - page 48

    To change the small jets The top of the appliance has to be removed before the small jets can be changed. ^ Loosen the fixing screws on the burners. ^ Pull the control knobs off. ^ Lift the top of the appliance off. Small, medium and large burners ^ Remove ignitor a . ^ Using a small screwdriver, unscrew small jet b in the gas fitting. ^ Pull out t ...

  • Miele km 2034/2035 - page 49

    Wok burner b Small diameter jet (e.g. for liquid gas: 0.27). c Large diameter jet (e.g. for liquid gas: 0.52). ^ Remove ignitor a . ^ Using a small screwdriver, unscrew small jets b and c in the gas fitting. ^ Pull out the jets with a pair of pliers. ^ Fit the correct jets securely (see jet table). ^ Finally secure the jets against inadvertent loos ...

  • Miele km 2034/2035 - page 50

    After changing the jets ^ Reassemble the burner parts in the reverse order, ^ Check all gas fittings for leaks by operating the burner without the top section of the hob in place (use a match to ignite the flame). ^ Remove the loose burner parts again. ^ Replace the top of the appliance. ^ Screw the parts for the burner bases together securely, and ...

  • Miele km 2034/2035 - page 51

    In the event of any faults which you cannot remedy yourself, or if the appliance is under guarantee, please contact: – Your Miele dealer, or – the Miele Service Department (see back cover for address). Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial ...

  • Miele km 2034/2035 - page 52

    Alteration rights reserved / 2111 M.-Nr. 07 181 160 / 05 ...

Manufacturer Miele Category Welding Consumables

Documents that we receive from a manufacturer of a Miele km 2034/2035 can be divided into several groups. They are, among others:
- Miele technical drawings
- km 2034/2035 manuals
- Miele product data sheets
- information booklets
- or energy labels Miele km 2034/2035
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele km 2034/2035.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele km 2034/2035, service manual, brief instructions and user manuals Miele km 2034/2035. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele km 2034/2035.

Similar manuals

A complete manual for the device Miele km 2034/2035, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele km 2034/2035 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele km 2034/2035.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele km 2034/2035 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele km 2034/2035, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele km 2034/2035, that we can find in the current document
3. Tips how to use the basic functions of the device Miele km 2034/2035 - which should help us in our first steps of using Miele km 2034/2035
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele km 2034/2035
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele km 2034/2035 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele km 2034/2035?

Use the form below

If you did not solve your problem by using a manual Miele km 2034/2035, ask a question using the form below. If a user had a similar problem with Miele km 2034/2035 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)