Manual Remington REMJ70

24 pages 0.37 mb
Download

Go to site of 24

Summary
  • Remington REMJ70 - page 1

    PORT ABLE FORCED AIR HEA TERS OWNER’S MANUAL 150 SIDE HANDLE PFA/PV 005 REMJ150 IMPORTANT Read and understand this manual before assembling, starting or servicing heater. Improper use of heater can cause serious injury. Keep this manual for future reference. REMJ70 ® ...

  • Remington REMJ70 - page 2

    2 102961 Safety Information ......................................................................... 2 Product Identification .................................................................... 4 Unpacking ...................................................................................... 5 Assembly ........................................... ...

  • Remington REMJ70 - page 3

    3 102961 SAFETY INFORMA TION Continued W ARNINGS (Continued) • Use only kerosene to avoid risk of fire or explosion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels. • Fueling a) Personnel in v olved with fueling shall be qualified and thoroughly familiar with the manufacturer's instructions and appl ...

  • Remington REMJ70 - page 4

    4 102961 Side Cover PRODUCT IDENTIFICA TION Figure 1 - REMJ70 Fan Guard Power Cord Fuel Cap Fan Guard Hot Air Outlet Upper Shell Fuel Tank Lower Shell Fuel Gauge Flame-Out Control Reset Button ON/OFF Switch Fuel Tank Upper Shell Hot Air Outlet Lower Shell Fuel Cap Side Cover ON/OFF Switch Flame-Out Control Reset Button Power Cord Fuel Gauge Figure ...

  • Remington REMJ70 - page 5

    5 102961 UNP ACKING 1. Remove all packing items applied to heater for shipment. 2. Remove all items from carton. 3. Check items for any shipping damage. If heater is damaged, promptly inform dealer where you bought heater. ASSEMBL Y These models are furnished with wheels and handles. Wheels, handles, and the mounting hardware are found in the shipp ...

  • Remington REMJ70 - page 6

    6 102961 THEOR Y OF OPERA TION The Fuel System: The air pump forces air through the air line. The air is then pushed through the burner head nozzle. This air causes fuel to lift from the tank. A fine mist of fuel is sprayed into the combustion chamber. The Air System: The motor turns the fan. The fan pushes air into and around the combustion chamb ...

  • Remington REMJ70 - page 7

    7 102961 W ARNING Review and understand the warnings in the Safety Information Section , page 3. They are needed to safely operate this heater. Follow all local codes when using this heater. OPERA TION To Start Heater 1. Follow all ventilation and safety information. 2. Fill fuel tank with kerosene. 3. Attach fuel cap. 4. Plug power cord into groun ...

  • Remington REMJ70 - page 8

    8 102961 To Stop Heater 1. Turn ON/OFF switch to “OFF.” 2. Unplug power cord from outlet. To Restart Heater 1. Wait 2 minutes after stopping heater. 2. Repeat steps under To Start Heater , page 7. Note: If shipping, transport companies require fuel tanks to be empty. 1. Drain fuel tank by removing drain plug on underside of fuel tank. 2. Replac ...

  • Remington REMJ70 - page 9

    9 102961 TROUBLE- SHOOTING OBSERVED FAULT POSSIBLE CAUSE REMEDY Wrong pump pressure Dirty air output, air intake, and lint filters Dirty fuel filter Dirt in nozzle Dirty photocell lens Bad flame-out control Heater ignites, but flame-out control shuts off heater after a short period of time See Pump Pressure Adjustment , page 12. See Air Output, A ...

  • Remington REMJ70 - page 10

    10 102961 SER VICE PROCEDURES Upper Shell Removal 1. Remove screws along each side of heater using 5/16" nut-driver. These screws attach upper and lower shells together. 2. Lift upper shell off. 3. Remove fan guard. Figure 9 - Fuel Filter Removal (REMJ70) Side Cover Fuel Filter (REMJ70) 1. Remove side cover screws using 5/16" nut-driver. ...

  • Remington REMJ70 - page 11

    11 102961 Fuel Filter (REMJ150) 1. Remove side cover screws using 5/16" nut-driver. 2. Remove side cover. 3. Pull upper fuel line off fuel filter neck. 4. Carefully pry bushing, lower fuel line, and fuel filter out of fuel tank. 5. Wash fuel filter with clean fuel and replace in tank. 6. Attach upper fuel line to fuel filter neck. 7. Repla ...

  • Remington REMJ70 - page 12

    12 102961 Air Output, Air Intake, and Lint Filters 1. Remove upper shell (see page 10). 2. Remove filter end cover screws using 5/16" nut- driver. 3. Remove filter end cover. 4. Replace air output and lint filters. 5. Wash or replace air intake filter (see Preventative Maintenance Schedule, page 8). 6. Replace filter end cover. 7. Replace ...

  • Remington REMJ70 - page 13

    13 102961 Nozzle 1. Remove upper shell (see page 10). 2. Remove fan (see page 15). 3. Remove fuel and air line hoses from burner head. 4. Remove spark plug wire from spark plug. 5. Remove spark plug from burner head using 13/16" open-end wrench. 6. Remove three screws using 5/16" nut-driver and remove burner head from combustion chamber. ...

  • Remington REMJ70 - page 14

    14 102961 Pump Rotor (Procedure if rotor is binding) 1. Remove upper shell (see page 10). 2. Remove filter end cover screws using 5/16" nut- driver. 3. Remove filter end cover and air filters. 4. Remove pump plate screws using 5/16" nut- driver. 5. Remove pump plate. 6. Remove rotor, insert, and blades. 7. Check for debris in pump. If ...

  • Remington REMJ70 - page 15

    15 102961 REMJ70 REMJ150 Heat Output (Kcal/hr) 17,640 38,500 Fuel Consumption (liters/hr) 1.9 4.2 Fuel T ank Capacity (liters) 16 47 Run T ime per T ank (hours) 8 11 Hot Air Output (m 3 /min) 6.7@50Hz 12.4@50Hz 7.5@60Hz 13.7@60Hz V oltage 100 100 Frequency (Hz) 50/60 50/60 W attage (W) 200 340 Pump Pressure (kg/cm 2 ) 0.35@50Hz 0.35@50Hz 0.38@60Hz ...

  • Remington REMJ70 - page 16

    16 102961 ILLUSTRA TED P ARTS BREAKDOWN REMJ70 18-2 Motor and Pump Assembly 18-5 18-16 18-4 18-8 18-3 18-6 18-7 18-9 18-10 18-11 18-12 18-13 18-14 18-15 10-2 10-3 10-4 10-5 10-6 10-7 10-1 18-1 18-18 Burner Head Assembly 18-17 40 41 43 5 47 46 2 4 3 6 7 8 10 11 12 12 14 18 21 22 24 27 28 29 30 31 32 34 38 37 19 13 9 33 35 36 42 39 23 44 45 1 26 15 1 ...

  • Remington REMJ70 - page 17

    17 102961 KEY PART PART NO. NUMBER DESCRIPTION QTY. 19 M50050 Rubber Boot 1 20 NTC-4C Hex locknut 2 21 M50104-02 Shorty Bushing (wires) 1 22 M11084-26 Screw, #10-16 x 3/8" 6 23 098511-81 Lower Shell 1 24 M11271-8 Clip Nut 6 25 097061-01 Relay (motor start) 1 26 079010-18 Wire Assembly (red 16") 1 27 M10908-14 Screw, #8-32 x 3/8" 1 28 ...

  • Remington REMJ70 - page 18

    18 102961 10-2 10-11 Motor and Pump Assembly 10-1 10-4 10-3 10-5 10-6 10-7 10-8 10-9 10-10 10-12 10-13 10-14 10-15 10-16 10-17 10-18 BURNER HEAD 100 EAI/EBI PFA/P 022 Burner Head Assembly 7-1 7-2 7-3 7-4 7-5 7-7 7-6 ILLUSTRA TED P ARTS BREAKDOWN REMJ150 1 2 3 4 5 6 7 8 23 19 9 10 16 25 26 27 24 28 20 22 21 30 31 41 33 34 40 17 18 32 37 38 44 46 45 ...

  • Remington REMJ70 - page 19

    19 102961 17 101901-03 Electronic Ignitor 1 18 M11084-29 Screw, #10-16 x 3/4" 2 19 M51345-01 Fuel Line 1 20 M51150-01 Fuel Filter 1 21 M51151-02 Fuel Line Tube 1 22 M10990-3 Rubber Bushing 1 23 M50814-03 Air Line 1 24 098511-82 Lower Shell 1 25 M50104-03 Bushing 2 26 M50104-01 Bushing 2 27 M11084-27 Screw, #10-16 x 1/2" 6 28 M11271-8 Clip ...

  • Remington REMJ70 - page 20

    20 102961 WHEELS AND HANDLES 3 6 5 7 2 4 1 7 4 3 5 6 1 2 REMJ70 REMJ150 KEY PART PART REMJ70 REMJ150 NO. NUMBER DESCRIPTION QTY. QTY. 1 097198-02 Handle (Rear) 1 — 097777-03 Handles — 2 2 M12345-33 Screw, #10-24 x 1 3/4" 4 8 3 097197-02 Wheel Support Frame 1 — M12831-3 Wheel Support Frame — 1 4 NTC-3C Hex Nut, #10-24 4 8 5 097766-01 Wh ...

  • Remington REMJ70 - page 21

    21 102961 WIRING DIAGRAMS White Photo- cell Black Blue Flame Out Control B Reset Button R Red Blue White Spark Plug Green/ Yellow Black Power Plug Green White White White Red Red Green Terminal Board Motor Ignitor Plug Receptacle Power On Switch Black Red Relay Black ACCESSOR Y Purchase accessory from your local dealer. AIR GAUGE KIT - HA1180 For a ...

  • Remington REMJ70 - page 22

    22 102961 NOTES _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ ____ ...

  • Remington REMJ70 - page 23

    23 102961 NOTES _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ ____ ...

  • Remington REMJ70 - page 24

    24 102961 Printed in U.S.A. 102961-01 Rev. A 06/96 ...

Manufacturer Remington Category Electric Heater

Documents that we receive from a manufacturer of a Remington REMJ70 can be divided into several groups. They are, among others:
- Remington technical drawings
- REMJ70 manuals
- Remington product data sheets
- information booklets
- or energy labels Remington REMJ70
All of them are important, but the most important information from the point of view of use of the device are in the user manual Remington REMJ70.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Remington REMJ70, service manual, brief instructions and user manuals Remington REMJ70. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Remington REMJ70.

A complete manual for the device Remington REMJ70, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Remington REMJ70 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Remington REMJ70.

A complete Remington manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Remington REMJ70 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Remington REMJ70, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Remington REMJ70, that we can find in the current document
3. Tips how to use the basic functions of the device Remington REMJ70 - which should help us in our first steps of using Remington REMJ70
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Remington REMJ70
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Remington REMJ70 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Remington REMJ70?

Use the form below

If you did not solve your problem by using a manual Remington REMJ70, ask a question using the form below. If a user had a similar problem with Remington REMJ70 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)