Manual Porter-Cable 121

15 pages 0.2 mb
Download

Go to site of 15

Summary
  • Porter-Cable 121 - page 1

    Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for futur e refer ence. Model No. ______________________________________ T ype ___________________________________________ Serial No. ______________________________________ IMPORT ANT! Please make certain ...

  • Porter-Cable 121 - page 2

    2 Read and understand all warnings and operating instructions before using any tool or equipment. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury . Improper operation, maintenance or modification of tools or equipment could result in serious injury and pr operty damage. There a ...

  • Porter-Cable 121 - page 3

    3 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known (to the State of California) to cause cancer , birth defects or other repr oductive harm. Some examples of these chemicals are: • lead from lead-based paints • crystalline silica from bricks and cement and other masonry p ...

  • Porter-Cable 121 - page 4

    4 Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury . The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cor dless) power tool. SA VE THESE INSTRUCTIONS 1) W ork area safety a) Keep wo ...

  • Porter-Cable 121 - page 5

    5 e) Do not overreach. Keep pr oper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress pr operly . Do not wear loose clothing or jewelry . Keep your hair , clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. g) If devices are p ...

  • Porter-Cable 121 - page 6

    6 SA VE THESE INSTRUCTIONS! ADDITIONAL SPECIFIC SAFETY RULES 1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wir e will make exposed metal parts of the tool "live" and shock the operator . 2. Keep hands and bod ...

  • Porter-Cable 121 - page 7

    7 SA VE THESE INSTRUCTIONS! SYMBOL DEFINITION V ........................................ volts A ........................................ amperes Hz ...................................... hertz W ....................................... watts kW ..................................... kilowatts F ........................................ farads µ F .. ...

  • Porter-Cable 121 - page 8

    8 ADDITIONAL SAFETY RULES FOR P AINT REMOV AL L Extreme car e should be taken when removing paint. The peelings, residue, and vapors of paint may contain lead, which is poisonous. Exposure to even low levels of lead can cause irreversible brain and nervous system damage. Y oung and unborn children are particularly vulnerable. Before beginning any p ...

  • Porter-Cable 121 - page 9

    9 CARTON CONTENTS EXTENSION CORD SELECTION If an extension cord is used, make sur e the conductor size is lar ge enough to prevent excessive voltage dr op which will cause loss of power and possible motor damage. A table of recommended extension cor d sizes will be found in this section. This table is based on limiting line voltage drop to 5 volts ...

  • Porter-Cable 121 - page 10

    10 NOTE: This tool is shipped completely assembled. No assembly time or tools are requir ed. ASSEMBL Y OPERA TION INST ALLING THE QUICK RELEASE DRUM SYSTEM Note: When installing a 1/2" sanding sleeve on the shaft, do not use the rubber drum (B) or washers (A) Fig. 1. A DISCONNECT TOOL FROM POWER SOURCE. B A C D THE DUST COLLECTION NOZZLE Y ou ...

  • Porter-Cable 121 - page 11

    11 1. Align the holes in the base plate (A) and (B) Fig. 5 with the holes in the edge guide (C) and (D) Fig. 5. Insert and securely tighten the two scr ews. TO ST ART AND STOP THE 121 OSCILLA TING SANDER 1. Make sure that the switch is in the “OFF” position, and the power cir cuit voltage is the same as the voltage shown on the specification pl ...

  • Porter-Cable 121 - page 12

    12 5. Tighten the 3/16" bolt to hold the out-feed guide (B) Fig. 6 in place. 6. Set the in-feed guide (A) Fig. 6 for the amount of material that you want to remove. When using the edge guide, always start sanding from the end or corner of the workpiece for even sanding. Start with the front feed guide against the workpiece and gradually feed t ...

  • Porter-Cable 121 - page 13

    13 MAINTENANCE KEEP TOOL CLEAN Periodically blow out all air passages with dry compressed air . All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material. W ear ANSI Z87.1 safety glasses while using compressed air . F AILURE TO ST ART Should y ...

  • Porter-Cable 121 - page 14

    14 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter -Cable warrants its Professional Power T ools for a period of one year from the date of original purchase. W e will repair or replace at our option, any part or parts of the pr oduct and accessories covered under this warranty which, after examination, pr oves to be defective in workmanship or materi ...

  • Porter-Cable 121 - page 15

    ® 4825 Highway 45 North Jackson, TN 38305 1-888-848-5175 www .porter -cable.com The following are trademarks of POR TER-CABLE • DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE • DEL T A S.A.) (Les marques suivantes sont des mar ques de fabriquant de la PORTER-CABLE • DEL T A): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder? ...

Manufacturer Porter-Cable Category Cordless Sander

Documents that we receive from a manufacturer of a Porter-Cable 121 can be divided into several groups. They are, among others:
- Porter-Cable technical drawings
- 121 manuals
- Porter-Cable product data sheets
- information booklets
- or energy labels Porter-Cable 121
All of them are important, but the most important information from the point of view of use of the device are in the user manual Porter-Cable 121.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Porter-Cable 121, service manual, brief instructions and user manuals Porter-Cable 121. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Porter-Cable 121.

Similar manuals

A complete manual for the device Porter-Cable 121, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Porter-Cable 121 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Porter-Cable 121.

A complete Porter-Cable manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Porter-Cable 121 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Porter-Cable 121, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Porter-Cable 121, that we can find in the current document
3. Tips how to use the basic functions of the device Porter-Cable 121 - which should help us in our first steps of using Porter-Cable 121
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Porter-Cable 121
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Porter-Cable 121 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Porter-Cable 121?

Use the form below

If you did not solve your problem by using a manual Porter-Cable 121, ask a question using the form below. If a user had a similar problem with Porter-Cable 121 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)