English dropdown-ico

Manual Tektronix P6131

28 pages 0.16 mb
Download

Go to site of 28

Summary
  • Tektronix P6131 - page 1

    Instruction Manual P6131 10X Passive Pr obe for 2400 Series Oscilloscopes 070-5514-03 *P070551403* 070551403 W arning The servicing instructions are for use by qualified personnel only . T o avoid personal injury , do not perform any servicing unless you are qualified to do so. Refer to all safety summaries prior to performing service. www .tektron ...

  • Tektronix P6131 - page 2

    Copyright © T ektronix, Inc. All rights reserved. T ektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes that in all previously published material. Specifications and price change privileges reserved. T ektronix, Inc., P .O. Box 500, Beaverton, OR 97077-1000 TEKTRONIX and TEK are ...

  • Tektronix P6131 - page 3

    W ARRANTY T ektronix warrants that the products that it manufactures and sells will be free from defects in materials and workmanship for a period of one (1) year from the date of purchase from an authorized T ektronix distributor . If any such product proves defective during this warranty period, T ektronix, at its option, either will repair the d ...

  • Tektronix P6131 - page 4

    Contacting T ektronix Product support For questions about using T ektronix measurement products, call toll free in North America: 1-800-833–9200 6:00 a.m. – 5:00 p.m. Pacific time Or contact us by e-mail: tm_app_supp@tek.com For product support outside of North America, contact your local T ektronix distributor or sales office. Service support ...

  • Tektronix P6131 - page 5

    P6131 Instruction Manual i General Safety Summary Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it. T o avoid potential hazards, use this product only as specified. Only qualified personnel should perform service pr ocedur es. Connect and Disconnect Properly . Do not connect ...

  • Tektronix P6131 - page 6

    ii P6131 Instruction Manual Service Safety Summary Only qualified personnel should perform service procedures. Read this Service Safety Summary and the General Safety Summary before performing any service procedures. Do Not Service Alone. Do not perform internal service or adjustments to this product unless another person capable of rendering first ...

  • Tektronix P6131 - page 7

    P6131 Instruction Manual 1 Operating Basics The P6131 probe is a subminiature, 10X, passive probe designed specifically for use with T ektronix 2400 Series oscilloscopes. It is fully compatible with the T ektronix family of subminiature probe accessories. The P6131 is available with 1.3 and 2 meter cable. W ARNING. T o avoid electric shock when usi ...

  • Tektronix P6131 - page 8

    Operating Basics 2 P6131 Instruction Manual Grounding the Probe Connect the probe to the instrument and connect the ground lead to ground before making any measurement. Ensure that no part of the ground lead contacts voltage in the circuit under test. Except for the probe tip and BNC center conductor , all accessible metal (including the ground cli ...

  • Tektronix P6131 - page 9

    P6131 Instruction Manual 3 Specifications The characteristics listed in T able 1 apply to P6131 probes installed on T ektronix 2445 and 2465 oscilloscopes or 7A42 plug-ins, unless otherwise noted. Specifications apply when the instruments warm up for a period of at least 20 minutes in an environment that does not exceed the limits described in T ab ...

  • Tektronix P6131 - page 10

    Specifications 4 P6131 Instruction Manual @25% Duty Factor =(1/2 Peak V) RMS @50% Duty Factor =(1.414 (Peak V)) RMS Special case of square wave: @20% Duty Factor =[(V Peak ) 2 (Duty Factor)] 1/2 Example: Maximum Input V oltage =[(650 V Pk) 2 (.20)] 1/2 = 290 V RMS 0V 0V 0V Figure 2: Maximum input voltage calculation example R P and X P (  ) 10M ...

  • Tektronix P6131 - page 11

    Specifications P6131 Instruction Manual 5 Frequency (MHz) 500 100 10 1 10 100 V oltage (RMS) Figure 4: T ypical P6131 voltage derating versus frequency T able 2: Environmental characteristics Characteristic Description T emperature range Operating –15 _ C to 65 _ C (+5 _ F to 149 _ F) Nonoperating –62 _ C to 85 _ C (–80 _ F to 185 _ F) Humidi ...

  • Tektronix P6131 - page 12

    Specifications 6 P6131 Instruction Manual T able 4: Certifications and compliances EC Declaration of Conformity Compliance was demonstrated to the following specification as listed in the Official Journal of the European Communities: Low V oltage Directive 73/23/EEC as amended by 93/68/EEC: EN 61010-1/A2 EN 61010-2-031:1994 Safety requirements for ...

  • Tektronix P6131 - page 13

    P6131 Instruction Manual 7 Service Information W ARNING. The following instructions ar e for use by qualified service personnel only . T o avoid electrical shock, do not disassemble or maintain the pr obe while it is connected to a signal sour ce other than those specified in this pr ocedur e. This section contains detailed performance checks, adju ...

  • Tektronix P6131 - page 14

    Service Information 8 P6131 Instruction Manual T able 5: Performance verification and adjustment test equipment (cont.) Description Example product Minimum requirements T ermination 50  BNC T ektronix 01 1-0049-XX Low-reactance alignment tool 2 inch shaft, .050 inch bit size T ektronix 003-0675-XX 2 T o confirm the full bandwidth specification o ...

  • Tektronix P6131 - page 15

    Service Information P6131 Instruction Manual 9 4. Adjust the sine wave generator output amplitude to produce a 6-division display on the test oscilloscope. Center the waveform on screen. 5. Set the sine wave generator to the high-frequency range and slowly increase the variable frequency control until the display amplitude decreases to 4.2 division ...

  • Tektronix P6131 - page 16

    Service Information 10 P6131 Instruction Manual 6. Remove the coax cable from the test setup. Connect the P6131 probe output to the same vertical input on the oscilloscope. 7. Connect the probe tip through the probe-tip-to-BNC adapter to the standard amplitude output of the calibration generator . (Y ou must remove the light gray probe-body shell b ...

  • Tektronix P6131 - page 17

    Service Information P6131 Instruction Manual 11 T o adjust the probe low-frequency compensation do the following: 1. Connect the probe output to the test oscilloscope vertical input. 2. Set the oscilloscope controls as follows: V olts /Division 0.1 V (includes 10X probe attenuation) T ime/Division 1 ms Input Coupling DC Bandwidth Full 3. Connect th ...

  • Tektronix P6131 - page 18

    Service Information 12 P6131 Instruction Manual Over compensated Under compensated Correct Figure 7: Low-frequency compensation, optimizing the waveform T o adjust the probe high-frequency compensation do the following: 1. Connect the positive-going fast-rise output of the calibration generator to the test oscilloscope with the precision coax cable ...

  • Tektronix P6131 - page 19

    Service Information P6131 Instruction Manual 13 8. Connect the probe output to the oscilloscope vertical input. 9. Connect the probe tip through the probe-tip-to-BNC adapter and a 50 W termination to the positive-going fast-rise output of the calibration generator . (The light gray probe-body shell must be removed before inserting the probe tip int ...

  • Tektronix P6131 - page 20

    Service Information 14 P6131 Instruction Manual R2010 R2020 R2021 C1010 R2010 C1010 C2010 R2021 R2020 Plastic-shell version Metal-shell version Figure 8: High-frequency compensation adjustment locations ≈ 20 ns R2021 ≈ 5 ns R2021 ≈ 3 ns R2021 C1010 Figure 9: High-frequency compensation, optimizing the waveform ...

  • Tektronix P6131 - page 21

    Service Information P6131 Instruction Manual 15 Maintenance Use the following procedures to clean and maintain the P6131 probe. T o remove accumulated dirt from the probe exterior , use a soft cloth dampened with a nonresidue cleaner , preferably isopropyl alcohol. In particular , avoid solvents such as benzene, toluene, xylene, or acetone. Modular ...

  • Tektronix P6131 - page 22

    Service Information 16 P6131 Instruction Manual ...

  • Tektronix P6131 - page 23

    P6131 Instruction Manual 17 Replaceable Parts This section contains a list of the replaceable modules for the P6131 probe. Use this list to identify and order replacement parts. Parts Ordering Information Replacement parts are available through your local T ektronix field office or representative. Changes to T ektronix products are sometimes made t ...

  • Tektronix P6131 - page 24

    Replaceable Parts 18 P6131 Instruction Manual Using the Replaceable Parts List This section contains a list of the replaceable mechanical and electrical compo- nents for the P6131 probe. Use this list to identify and order replacement parts. The table below describes the content of each column of the parts list. Parts list column descriptions Colum ...

  • Tektronix P6131 - page 25

    Replaceable Parts P6131 Instruction Manual 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Figure 10: P6131 probe with standard accessories Replaceable parts: P6131 probe and standard accessories Fig. & index number T ektronix part number Serial no. effective Serial no. discont’d Qty Name & description Mfr . code Mfr . part number P6131 PROB ...

  • Tektronix P6131 - page 26

    Replaceable Parts 20 P6131 Instruction Manual Replaceable parts: P6131 probe and standard accessories (cont.) Fig. & index number Mfr . part number Mfr . code Name & description Qty Serial no. discont’d Serial no. effective T ektronix part number 10 –6 174–0972–00 8805 1 CABLE ASSY ,RF:39 OHM COAX,3.0M (ST ANDARD ONL Y) TK2469 174? ...

  • Tektronix P6131 - page 27

    Replaceable Parts P6131 Instruction Manual 21 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Figure 1 1: P6131 probe optional accessories Replaceable parts: P6131 probe optional accessories Fig. & index number T ektronix part number Serial no. effective Serial no. discont’d Qty Name & description Mfr . code Mfr . part number P6131 PROBE OPTIONAL ACCESS ...

  • Tektronix P6131 - page 28

    Replaceable Parts 22 P6131 Instruction Manual Replaceable parts: P6131 probe optional accessories (cont.) Fig. & index number Mfr . part number Mfr . code Name & description Qty Serial no. discont’d Serial no. effective T ektronix part number 1 1–5 206–0364–00 8851 1 TIP ,PROBE:MICROCKT TEST ,0.05 CTR 80009 206–0364–00 –6 013? ...

Manufacturer Tektronix Category Thermometer

Documents that we receive from a manufacturer of a Tektronix P6131 can be divided into several groups. They are, among others:
- Tektronix technical drawings
- P6131 manuals
- Tektronix product data sheets
- information booklets
- or energy labels Tektronix P6131
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tektronix P6131.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tektronix P6131, service manual, brief instructions and user manuals Tektronix P6131. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tektronix P6131.

Similar manuals

A complete manual for the device Tektronix P6131, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tektronix P6131 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tektronix P6131.

A complete Tektronix manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tektronix P6131 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tektronix P6131, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tektronix P6131, that we can find in the current document
3. Tips how to use the basic functions of the device Tektronix P6131 - which should help us in our first steps of using Tektronix P6131
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tektronix P6131
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tektronix P6131 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tektronix P6131?

Use the form below

If you did not solve your problem by using a manual Tektronix P6131, ask a question using the form below. If a user had a similar problem with Tektronix P6131 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)