Manual Sharp AR-FX12

104 pages 4.3 mb
Download

Go to site of 104

Summary
  • Sharp AR-FX12 - page 1

    FACSIMILE EXPANSION KIT OPERATION MANUAL MODEL AR-FX12 • BEFORE USING THE FAX FEATURE • BASIC OPERATIONS • USING CONVENIENT FUNCTIONS 1 • USING CONVENIENT FUNCTIONS 2 • USING CONVENIENT FUNCTIONS 3 • PROGRAMMING • TROUBLESHOOTING • KEY OPERATOR PROGRAMS • APPENDIX 1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1 9-1 Page Be sure to become thorough ...

  • Sharp AR-FX12 - page 2

    Q F AX interface cable and Line cable: These sp ecial accessor ies must be used with the device. Q Notice for User s in Eur ope This equipment works on on the British analogue public switched telephon e network. This equipment has been tested according to the pan-Eur opean TBR 21 regulation. It will operate on a ll analogue telephone networks which ...

  • Sharp AR-FX12 - page 3

    0-1 INTR ODUCTION Thank you for pu rchasing this product. This manual on ly ex plains the facsimile functions of th e product. For safety precautions and gene ral information on using the machine su ch as loading paper, clearing misfeed s, and handling peripheral units, se e the "Operation man ual (for general information and copier opera tion ...

  • Sharp AR-FX12 - page 4

    0-2 CONTENTS Page INTRODUCTION ....... .................... ................. ............ 0-1 TO USE THIS PRODUCT CORRECTLY AS A FACSIMILE .............. ................. ................ ................. . 0-4  IMPORTANT SAFETY INFO RMATION .............. .... 0-5  NOTICE FOR USERS IN AUSTRALIA AND NEW ZEALAND ............. .............. ...

  • Sharp AR-FX12 - page 5

    CONTENT S 0-3 CHAPTER 5 USING CONVENIENT FUNCTIONS 3 CONVENIENT METHODS OF USE Page USING AN EXTENSION PHONE ............. .................. 5-2  USING AN EXTENSION PHONE TO RECEIVE A FAX .. . 5-2  RECEIVING A FAX AFTER TALKING (MANUA L RECEPTION) ......... ................. ................. ............... 5-3  SENDING A FAX AFTER TALKI ...

  • Sharp AR-FX12 - page 6

    0-4 T O USE THIS PR ODUCT CORRECTL Y AS A F A CSIMILE Several points must be kept in mind when using this product as a facsimile. Please note the fol lowing:  Line connection Use the telephone cable supplied to connect the machine to a teleph one line. Insert the end of the line cord with the core into the LINE socket on the mach ine as shown. I ...

  • Sharp AR-FX12 - page 7

    TO USE THIS PRODUCT CORREC TLY AS A FACSIMILE 0-5 IMPOR T ANT SAFETY INFORMA TION  If any of your telephone equ ip ment is not operating properly, you should immediately remove it from your telephone line, as it may cause harm to the telephone network.  The AC power outlet shall be installed near the equipment and shall be ea sily accessible. ...

  • Sharp AR-FX12 - page 8

    ...

  • Sharp AR-FX12 - page 9

    1-1 CHAPTER 1 BEFORE USING THE F AX FEA TURE This chapter contains basic info rm ation that you should know before using the fax function of the machine. Please read this cha pter before using the fax features. Page POINTS TO CHECK AND PROGRAM AFTER INSTALLATION..............1-2 CONNECTING AN EXTENSION PHONE .................. .................. .. ...

  • Sharp AR-FX12 - page 10

    1-2 POINTS T O CHECK AND PR OGRAM AFTER INST A LLA TION After installing the unit and before us ing it as a fax machine, check the following points and pr ogram the required information.  Make sure the fax power s witch is turned on In addition to the machine power switch (see page 1-9 of the "Operation m anual (for general in formation and ...

  • Sharp AR-FX12 - page 11

    1-3 1 A LOOK A T THE OPERA TION P ANEL The operation panel used for the fax function is described b elow. T ouc h panel (f ollowing pa ge) • Messages an d keys appear in the to uch panel. Touch the displayed keys to select functions and enter settings. • When a key in the touch panel is touched, a beep sounds and the key is highlighted. • Key ...

  • Sharp AR-FX12 - page 12

    A LOOK A T THE OPERA T ION P ANEL 1-4 F AX MODE (CONDITION SETTINGS SCREEN) The condition settings sc reen of fax mode is displaye d by pressing the [IMAGE SEND] key while the document filing mode (printer mo de), copy mode, or job sta tus screen appear s in the to uch panel. In the explanations that follow, it is assumed that the initial screen th ...

  • Sharp AR-FX12 - page 13

    A LOOK AT THE OPE RATION PANEL 1-5 1 [SUB ADDRESS] key (page 4-3) Touch this key to ente r a sub-ad dress and passcode when using F-code tra nsmission. T wo- sided scanning icon displ ay (pa ge 2-7) Icons appea r here when you touc h the [ORIGINAL ] key and select two-sided scanning. Th e icons can be touched to open function select ion screens. [O ...

  • Sharp AR-FX12 - page 14

    1-6 ORIGINALS ORIGINALS THA T CAN BE F AXED  Original sizes  A utomatic reduction of faxed document If the size (width) of the faxed doc u ment is greater than th e receiving machine's paper size, the size will be automatically reduced. A document can also be faxed without reducing its size. In this case, the left and right edges will no ...

  • Sharp AR-FX12 - page 15

    1-7 1 LO ADING A DOCUMENT A document can be load ed in the automatic documen t feeder or on the docu ment glass. Use the automatic documen t feeder when faxing a large number of sheet originals. Us e the docume nt glass to fax originals that cannot be scanned using the automatic document feed er such as thick or th in sheet originals or boun d orig ...

  • Sharp AR-FX12 - page 16

    1-8 CHECKING THE SIZE OF A LO ADED ORIGINAL When a standard-size* origina l is placed, t he original size is automatically detected (automatic original detection function ) and di splayed in th e top half of the [ORIGINAL] key. Check the key to make sure that t he original size has b een correctly detected. :[AUTO] appears when the au tomatic orig ...

  • Sharp AR-FX12 - page 17

    1-9 1 ST ORING, DELETING, AND USING ORIGINAL SIZES Up to 9 special original sizes can be stored. Stored sizes can be easily call ed up and are not er ased if the power is turned off. St oring a freque ntly used origin al size saves y o u the trouble of manually se tt ing the size each time you fax that size of document.  To cancel an o riginal s ...

  • Sharp AR-FX12 - page 18

    1-10 SELECTING RESOLUTION AND EXPOSURE SETTINGS After loading an original, you can adjust th e resolution and exposure setting s to match the condition of the original-for example, if it has small or faint characte rs, or if it is a photo. After load ing the original in fax mode, adjust the settings as explained below. SELECTING THE RESOLUTION The ...

  • Sharp AR-FX12 - page 19

    SELECTING RESOLUTION AND EXPOSURE S ETTINGS 1-11 1 SELECTING THE EXPOSURE The initial exposure settin g is AUTO. To change the setting, follow these steps:  Change the exposure. 1 T ouch the [EXPOSURE] key . 2 T ouch the desired expos ure key . To darken the exp osure, touch the key. To lighten the e xposure, touch the key. When the or key is to ...

  • Sharp AR-FX12 - page 20

    1-12 CONVENIENT DIALING METHODS The fax function includes a convenie nt auto dial featur e (one-touch dialing and group dialing). By programming frequently dialed numb ers, you can ca ll and send documents to these lo cati ons by means of a simple dialing operation (refer to page 2-4). There ar e two types of auto-dialing: one-touch dialin g and gr ...

  • Sharp AR-FX12 - page 21

    2-1 CHAPTER 2 B ASIC OPERA TIONS This chapter explains basic operations such as sending faxes. Page SENDING A FAX ........... ................. ................ ................. ................. ...... 2-2  BASIC PROCEDURE FOR SENDING F AXES........... .............. ...... 2-2  TRANSMISSION BY AUTO-DIA LING (ONE-TOUCH DIALING AND GROUP DIA ...

  • Sharp AR-FX12 - page 22

    2-2 SENDING A F AX B ASIC PR OCEDURE FOR SENDING F AXES 1 Make sure the machine is in fax mode. When the [IMAGE SEND] key light is on, the machine is in fax mode. If the light is not on, press the [IMAGE SEND] key. If the network scanner option is installed, touch the [MODE SWITCH] key and then the [FAX] key to switch to fax mode. When fax mode is ...

  • Sharp AR-FX12 - page 23

    SENDING A FAX 2-3 2 7 Dial the fax number . The number that you entered appea rs in the message display (See "Condition settings screen" on page 1-4.). If it is not correct, press the [C] key and re-enter the number. You can also use the [RESEND] key (page 1-12) or a n auto-dial number (following page). Entering a pause. If you need to in ...

  • Sharp AR-FX12 - page 24

    SENDING A F AX 2-4 TRANSMISSION BY A UT O-DIALING (ONE-T OUCH DIALING AND GR OUP DIALING) Fax numbers can also be dialed by automatic dia ling (one -touch dialing and group dialing). Follow the steps belo w to send a fax using an auto dial number. To use an auto dial number, the na me and fax number of the destination must first be stored. For info ...

  • Sharp AR-FX12 - page 25

    SENDING A FAX 2-5 2 F AX NUMBER ENTR Y WITH GLOB AL ADDRESS SEARCH If the machine is configured as a network printer that can use LDAP service, the machine ca n be used to access the LDAP server* and search for the fax number. If the search returns the desired fax number, the number can be selected as a destination fax numbe r and/or stored in the ...

  • Sharp AR-FX12 - page 26

    SENDING A F AX 2-6 ENLARGING/REDUCING THE IMA GE BEFORE TRANSMISSION Follow these steps to enlarge or r educe the scanned image before transmission. 1 Make sure the machine is in fax mode. When the [IMAGE SEND] key light is on, the machine is in fax mode. If the light is not on, press the [IMAGE SEND] key. If the network scanner option is installed ...

  • Sharp AR-FX12 - page 27

    SENDING A FAX 2-7 2 F AXING A TW O-SIDED ORIGINAL A two-sided document can be automatica lly transmitte d using the automatic document feeder. Fol low the steps below to automatically send a two-sided document. 1 Make sure the machine is in fax mode. When the [IMAGE SEND] key light is on, the machine is in fax mode. If the light is not on, press th ...

  • Sharp AR-FX12 - page 28

    SENDING A F AX 2-8  Quic k On-line When you use the automatic do cument feeder to send a mu lti-page document and ther e are no previously stored jobs waiting or in progress (and the line is not being used), the machine dials the destination after th e first page is scanned and begins transmitting scanned pages wh ile the remaining page s are be ...

  • Sharp AR-FX12 - page 29

    2-9 2 PRIORITY TRANSMISSION OF A ST ORED JOB If you have an u rgent transmission job and multip le transm ission jobs have already been stored, you can give priority to the urgent job so that it will be tran smitted immediately after the job currently being ex ecuted. This is do ne from the job status screen. For details on using the job status scr ...

  • Sharp AR-FX12 - page 30

    2-10 RECEIVING F AXES When another fax machi ne sends a fax to your machine, your machine will ring*, automa tically receive the fax, and begin printing (this is called auto matic reception). RECEIVING A F AX 1 The machine will ring* and recept ion will automatically beg in. 2 Reception ends. When reception ends, the machine makes a "beep" ...

  • Sharp AR-FX12 - page 31

    3-1 CHAPTER 3 USING CONVENIENT FUNCTIONS 1 AD V ANCED TRANSMISSION METHODS This chapter explains conv enient funct ions for send ing faxes. P lease read those s ections that are of in terest to you. Page SENDING THE SAME DOCUMENT TO MULTIPLE DESTINATIONS IN A SINGLE OPERATION (BROADCAST TRANSMISSIO N) ................... 3-2  USING BROADCAST TRA ...

  • Sharp AR-FX12 - page 32

    3-2 SENDING THE SAME DOCUMENT T O MUL TIPLE DESTINA TIONS IN A SINGLE OPERA TION (BR O ADCAST TRANSMISSION) This feature is use d to send a documen t to multiple destinations in a single operation. The document to be transmitted is scanned into memory and then succe ssively transmitted to the selected desti nations. This feature is convenient for s ...

  • Sharp AR-FX12 - page 33

    SENDING THE SAME DOCUMENT TO MULTIPLE DESTINATIO NS IN A SINGLE OPERATION (BROADCAST TRANSMISSION) 3-3 3 USING BR O ADCAST TRANSMISSION 1 P erform steps 1 thr ough 6 of "BASIC PROCEDURE FOR SENDING F AXES" (page 2-2). 2 Dial the fax number of the fir s t destination or touch an auto-dial key (one-touch ke y , group key or spe ed dial key) ...

  • Sharp AR-FX12 - page 34

    3-4 ERASING EDGE SHADO WS (EDGE ERASE) The erase function is u sed to erase the shadow lines o n co pies produced when copying th ick originals or books. The erase modes that can be selected ar e shown below. The eras e width is approximately 10 mm (1/2") in it’s initial setting. USING EDGE ERASE 1 In fax mode, touch the [SPECIAL MODES] key ...

  • Sharp AR-FX12 - page 35

    3-5 3 F AXING A DIVIDED ORIGINAL (DU AL P A GE SCAN) When an open book is scanned an d faxed, you can use this func tion to divide the two open pages of th e book in to two separate fax pages. This function can only be used when th e original is scanned using the document glass.  Selecting Dual P age Scan Follow the steps below and then send the ...

  • Sharp AR-FX12 - page 36

    3-6 A UT OMA TIC TRANSMISSION A T A SPECIFIED TIME (TIMER TRANSMISSION) This feature enables yo u to set up a transmission or polli ng o peration to be performed automatica lly at a specified time up to a week in adva nce. This allows you to take advantage of off-pe ak phone rates without having to be the re when the transmission is pe rformed. A c ...

  • Sharp AR-FX12 - page 37

    3-7 3 TRANSMITTING TW O ORIGINAL P A GES AS A SINGLE P A GE (2in1) This function allows you to reduce the size of original pages by one half t o fit two pages evenly on one page when sending a fa x. USING 2in1 1 In fax mode, touch the [SPECIAL MODES] key . If the address book screen appears, touch the [CONDITION SETTINGS] key to display the conditi ...

  • Sharp AR-FX12 - page 38

    3-8 F AXING THE FR ONT AND B A CK SIDES OF A CARD ON ONE SHEET OF P APER (CARD SHO T) When faxing a ca rd, this functi on allows you t o combine t he front and back sides on a single sheet of paper. To use this function, the original must be scanned on the docum ent glass. USING CARD SHO T 1 In fax mode, touch the [SPECIAL MODES] key . If the addre ...

  • Sharp AR-FX12 - page 39

    FAXING THE FRONT AND BACK S IDES OF A CARD ON ONE SHEET OF PAPER (CARD SHOT) 3-9 3 4 T ouch the outer [OK] ke y . You will return to the screen of step 1 and a card shot icon will appear next to the [EXPOSURE] key. 5 Place the original on the document gla ss. Place the front side of the original face down and close the document cover. 6 Follow step ...

  • Sharp AR-FX12 - page 40

    3-10 F AXING A LARGE NUMBER OF P A GES (JOB B UILD MODE) The maximum number o f pages that can be loaded in the au tomatic document feeder is 50. When you need to fax more pages than can be loaded in the au tomatic document feeder, u se Job Build mode. This fu nction allows you to scan the pages in sets. If the memory becomes full while scan ning t ...

  • Sharp AR-FX12 - page 41

    3-11 3 O WN NUMBER SENDING This function prints th e date, time, your programmed name , your programmed fa x number, and the tran smitted page number at th e top cent re of each page that you fax. All pa ges that yo u fax include this inform ation. Example of fax page printed out b y the receiving machine (1) Date and time: The date and time, and t ...

  • Sharp AR-FX12 - page 42

    3-12 PRINTING OUT THE RESUL T OF A TRANSMISSION (TRANSA CTION REPOR T) You can choose whether or not to have a transaction report printe d out after each tran smission to inform you of the result of the transmission. This is done using "Transaction report print se lect setting" (page 8- 6) in the key operator programs, and the setting is ...

  • Sharp AR-FX12 - page 43

    3-13 3 TRANSMISSION AND RECEPTION USING THE POLLING FUNCTION This function can only be used if the other machine is a Super G3 or G3 machine and su pports the polling function. The polling function allows your machine to call a fax mach ine th at has document data set and initiate reception of the document. You can also p erform the reverse ope rat ...

  • Sharp AR-FX12 - page 44

    TRANSMISSION AND RE CEPTION USING THE POLLING FU NCTION 3-14 USING THE POLLING FUNCTION A document should not be loaded in the machine when the following o peration is performed. When used in conjunction with the timer tran smission function, only one polling job ca n be stored. 1 In fax mode, touch the [SPECIAL MODES] key and then touc h the key . ...

  • Sharp AR-FX12 - page 45

    TRANSMISSION AND RECEPTION USING THE POLLING FUNCTION 3-15 3 USING POLLING MEMOR Y This function sends a document previously scanned into memory to a receiving machine when the receiving machine calls and polls your machine. (If desired, you can restrict polling to fax machines whose fax number you have programmed in your machine. (See "Pollin ...

  • Sharp AR-FX12 - page 46

    TRANSMISSION AND RE CEPTION USING THE POLLING FU NCTION 3-16  Printing document data in the Public Bo x To check a document that is stored in the p ublic box, follow these steps to print it out. If no documents have be en stored, the [PUBLIC BOX] key will be greyed out. 1 In fax mode, touch the [SPECIAL MODES] key and then touc h the key . If th ...

  • Sharp AR-FX12 - page 47

    3-17 3 PR OGRAMMING FREQUENTL Y USED OPERA TIONS This function allows you to store the steps of an operation, includ ing the des tination and scanni ng settings, into a program. This functi on is conven ient when y ou frequen t ly send documents, such as a daily report, to the same destination. Up to eight programs can be stored. Programs can be st ...

  • Sharp AR-FX12 - page 48

    3-18 TRANSFERRING RECEIVED F AXES T O ANO THER MA CHINE WHEN PRINTING IS NO T POSSIBLE (FOR W ARDING FUNCTION) When printing is not p ossible because of a paper, toner, or other problem, you can tra nsfer received faxes to another fax machine if that mach ine has been appropria tely programmed in your machin e. This function can be con veniently us ...

  • Sharp AR-FX12 - page 49

    3-19 3 F AXING DIRECTL Y FR OM A COMPUTER ( PC-F AX FUNCTI ON) The PC-FAX driver ca n be installed in your compute r to enable documents created on your computer to be faxed directly from your computer screen. This eliminates the bother of printing the document and faxing it from the machine. The PC-FAX drive r is contained on the CD-ROM that a c c ...

  • Sharp AR-FX12 - page 50

    ...

  • Sharp AR-FX12 - page 51

    4-1 CHAPTER 4 USING CONVENIENT FUNCTIONS 2 TRANSMISSION USING F-CODES This chapter explains F-code transmission, which gives you a convenient mean s of performing advance d operations such as relay broadcast tra nsmission and confidential transmission . Normally these function s require that the other fax machine be a similar Sharp machine ; howeve ...

  • Sharp AR-FX12 - page 52

    4-2 TRANSMISSION BETWEEN MA CHINES SUPPOR TING F-CODES This machine supports the "F-code" standard as established by the ITU-T*. Operations such as relay broadcast transmission and confidential transmission previously could only be performed with another Sharp fax machine; however, F-Code communication makes it possible to perform these o ...

  • Sharp AR-FX12 - page 53

    TRANSMISSION BETW EEN MACHINES SUPPOR TING F-CODES 4-3 4 ENTERING (DIALING) A F AX NUMBER WITH A SUB- ADDRESS AND P ASSCODE When transmitting to a memory box in an other fax machine, the sub-address and passcode must be entered after the other machine's fax nu mber. Enter the other machine's fax nu mber as explained for a normal tr ansmis ...

  • Sharp AR-FX12 - page 54

    4-4 F-CODE POLLING MEMOR Y F-code polling memory allows one fax machine to call another fax machine an d activate reception of a document that has been scanned into the ot her machine's F-code polling memory box. Calling another machine and activating reception is called F-code polling, and scanning a document into a memory box for another mac ...

  • Sharp AR-FX12 - page 55

    F-CODE POLLING MEMORY 4-5 4  Chec king and clearing document data in a memory bo x The procedure for checking document dat a in an F-code polling me mory box by printing it and the pr ocedure for clearing data from a box are almost the same as the pr oc edures for printing and clear ing document data from the Public Box. Instead of touching the ...

  • Sharp AR-FX12 - page 56

    4-6 F-CODE CONFIDENTIAL TRANSMISSION F-Code con fidential tr ansmission pr ovides a s ecure me ans of faxi ng confiden tial documen ts. The sub- address an d passcode programmed in the memory box restrict the recipi ents of the fax, and once received in the memory box, the fax can only be printed by someone who knows the print passcode ( PRINT PIN. ...

  • Sharp AR-FX12 - page 57

    F-CODE CONFIDENTIAL TRA NSMISSION 4-7 4 PRINTING A DOCUMENT RECEIVED T O AN F-CODE CONFIDENTIAL MEMOR Y BO X Faxes received in an F- Code confidential memor y box ar e prin ted out by entering th e PRINT PIN 4-digit passcode (0000 to 99 99) that was programmed whe n the box was cr eate d. Printing of th e confidential faxes takes precedence over an ...

  • Sharp AR-FX12 - page 58

    4-8 F-CODE RELA Y BR O ADCAST TRANSMISSION The F-Code relay broadcast fu nction allows the machine to act as a relay machine for a broadcast transmission. The end receiving ma chines are stor ed in the machine 's F-Co de relay memory box, and when the machine receives a relay request from another F-Code machine, it will relay the fax to all of ...

  • Sharp AR-FX12 - page 59

    F-CODE RELAY BROADCAST TRANSMISSION 4-9 4 USING THE F-CODE RELA Y BRO ADCAST FUNCTION (y our machine is the relay mac hine) When a document is received fr om a relay request mach ine, the F-code relay b roadc ast function transmits the document to the end receivin g machines using a memory box only if the sub-address and passcode sent by the relay ...

  • Sharp AR-FX12 - page 60

    ...

  • Sharp AR-FX12 - page 61

    5-1 CHAPTER 5 USING CONVENIENT FUNCTIONS 3 CONVENIENT METHODS OF USE This chapter expl ains functions that widen th e scope of use of the fax machine. Please read those sections that are of interest to you. Page USING AN EXTENSION PHO NE ...................... ................. ................. ... 5-2  USING AN EXTENSION PHONE TO RECEI VE A FA ...

  • Sharp AR-FX12 - page 62

    5-2 USING AN EXTENSION PHONE You can connect a tele phone to the machine and use it as an extension phone to place and r eceive calls like any normal phone. You can also activa te fax re ception from the phone (r emote operation). USING AN EXTENSION PHONE T O RECEIVE A F A X The machine normally re ceives faxes automatically after ringing (page 2-1 ...

  • Sharp AR-FX12 - page 63

    USING AN EXTENSION PHONE 5-3 5 RECEIVING A F AX AFTER T ALKING (MANU AL RECEPTION) When an extension phone is connected to the machin e and you have set the r eception mode to "MANUAL RECEPTION", you can talk to a person sending a fax ma nually and then begin fax recepti on without breaking the connection.  When the machine is in F ax ...

  • Sharp AR-FX12 - page 64

    USING AN EXTE NSION PHONE 5-4 SENDING A F AX AFTER T ALKING (MANU AL TRANSMISSION) If the other fax machine is set to manual reception, yo u can talk to the other party and then send a fax without breaking the connection. This proced ure is called manual transmission. 1 Make sure the machine is in fax mode. When the [IMAGE SEND] key light is on, th ...

  • Sharp AR-FX12 - page 65

    6-1 CHAPTER 6 PR OGRAMMING This chapter explai ns the proc edures for prog ramming and the information progr ammed in auto dial keys (one-touch and group ke ys), programs, us er indexes, and memory boxes. Page PROGRAMMING ........ ................. ................. ................ ............... ........... 6-2 STORING, EDITING, AND DE LETING AU ...

  • Sharp AR-FX12 - page 66

    6-2 PR OGRAMMING Auto dial number s (one-touch keys and group keys), user in dexes, and memory boxes are stored , edited and deleted at the operatio n panel of the machine . ST ORING, EDITING, AND DELETING A UT O DIAL KEYS AND PR OGRAMS This section explains the procedure s for storing, editing, and deleting auto-dial keys (o ne-touch keys and grou ...

  • Sharp AR-FX12 - page 67

    STORING, EDITING, AND DELETING A UTO DIAL KEYS AND PROGRA MS 6-3 6 ST ORING ONE-T OUCH DIAL KEYS To store a one-touch key, follow steps 1 to 3 on page 6- 2, touch the [INDIVIDUAL] key in step 4, and then follow these ste ps. 1 Make sure the [F AX] key is c hecked. If a FAX checkmark ( ) does not appear, touch the checkbox. (a) The lowest n umber (N ...

  • Sharp AR-FX12 - page 68

    ST ORING, EDITIN G, AND DELETING A UT O DIAL KEYS AND PROGRAMS 6-4 10 Use the nume ric keys to enter the fax numb er .  To insert a pause betw een digits of the number, tou ch the [PAUSE] key. The pause appears as a hyph en "- ". Refer to page 8- 6 to set the duration of the pause.  If you make a mistake, press the [C] key to clear ...

  • Sharp AR-FX12 - page 69

    STORING, EDITING, AND DELETING A UTO DIAL KEYS AND PROGRA MS 6-5 6 EDITING AND DELETING ONE-T OUCH KEYS If you wish to delete a one-touch key or change the fa x number, nam e, or other information pr ogrammed in a one- touch key, follow steps 1 through 3 o n page 6-2 and then perform the followin g procedure. 1 T ouch the [AMEND/DELETE] key . 2 T o ...

  • Sharp AR-FX12 - page 70

    ST ORING, EDITIN G, AND DELETING A UT O DIAL KEYS AND PROGRAMS 6-6 ST ORING A GR OUP KEY A group of numbers can be store d in a group key. The numbers can be stored by touching one -touch keys (see "STORING ONE-TOUCH DIAL KEYS" on pages 6-3 to 6-4) or by directly entering full numb ers with the numeric keys. Up to 500 (maximum of 300 on t ...

  • Sharp AR-FX12 - page 71

    STORING, EDITING, AND DELETING A UTO DIAL KEYS AND PROGRA MS 6-7 6 EDITING AND DELETING GR OUP KEYS If you need to delete a group ke y or change its name or a one of its sto red destinations in a group key, first follow steps 1 through 3 on page 6-2, and then perform the following procedure. 1 T ouch the [AMEND/DELETE] key . 2 T ouch the group ke y ...

  • Sharp AR-FX12 - page 72

    ST ORING, EDITIN G, AND DELETING A UT O DIAL KEYS AND PROGRAMS 6-8 ST ORING A PR OGRAM You can store a destination fax number, speed dialing, polling, eras e, dual page scan, 2in1, card shot, and resolution and exposure settings in a program. This enable s you to call up the pr ogram and perform the transmission by mean s of a simplified operatio n ...

  • Sharp AR-FX12 - page 73

    6-9 6 ST ORING A GR OUP INDEX Auto dial keys (o ne-touch ke ys and group key s) are normally st ored in the ABC in dex. To make au to dial keys mor e convenient to use, you can sto re a group of auto dial keys in a group index and assign a name to tha t index. When you switch to the grou p indexes, [USER 1], [USER 2], [USER 3], [USER 4], [USER 5], ...

  • Sharp AR-FX12 - page 74

    6-10 PR OGRAMMING, EDITING, AND DELETING F-CODE MEMOR Y BO XES The procedure for programming a memo ry box for F-code tr an smission is explained here. Th ere are three types of F-code memory boxes: F-code pol ling memory (page 4-4), F- code confidential transmission (pag e 4-6), and F-code relay broadcast (page 4-8) . Memory boxes are programmed, ...

  • Sharp AR-FX12 - page 75

    PROGRAMMING, EDITING, AND DE LETING F-CODE MEMORY BOXES 6-11 6 8 Use the numeric ke ys to enter a passcode (max. 20 digits).  In addition to numbers, the chara cters " " and "#" can be used in a passcode.  If you make a mistake, press the [C] key to clear the mistake. 9 T ouch the [OK] key . You will return to the memory b ...

  • Sharp AR-FX12 - page 76

    PROGRAMMING, EDITING, AND DE LETING F-CODE MEMOR Y BO XES 6-12 SETTING FOR F-CODE CONFIDENTIAL TRANSMISSION MEMOR Y BO XES (PRINT PIN) Program the print PIN (Person al Identification Number) th at is used to print a document that has been received to an F-code confidentia l memory box. For information on using a print PIN, refer to "PRINTING A ...

  • Sharp AR-FX12 - page 77

    PROGRAMMING, EDITING, AND DE LETING F-CODE MEMORY BOXES 6-13 6 SETTING FOR F-CODE RELA Y BRO ADCAST MEMOR Y BO XES (RECIPIENT) Program the end receiving machines to which documen t data received in the F-code r elay broadcast memory box will be transmitted when your machine is a relay machine. Up to 30 end receiving machines can be p rogrammed. If ...

  • Sharp AR-FX12 - page 78

    PRINTING PROGRAMMED IN FORMA TION 6-14 EDITING AND DELETING A MEMOR Y BO X 1 Press the [CUST OM SETTINGS] ke y and then touch the [ADDRESS CONTR OL] key (refer to steps 1 and 2 on page 6-2). 2 T ouch the [F-CODE MEMOR Y BO X] key . (refer to step 2 on page 6-10) 3 T ouch one of the memory bo x keys ([POLLING MEMOR Y], [CONFIDENTIAL], or [RELA Y BRO ...

  • Sharp AR-FX12 - page 79

    7-1 CHAPTER 7 TR OUBLESHOO TING This chapter contains information to help you make efficien t use of the fax features of the machine, incl uding solutions to common pr oblems. Page WHEN A TRANSACTION REPORT IS PR I NTED ... .............. ................. 7- 2 VIEWING THE CO MMUNICATION ACTIVITY REPORT ................. ...... 7-3 WHEN AN ALARM SO ...

  • Sharp AR-FX12 - page 80

    7-2 WHEN A TRANSA CTION REPOR T IS PRINTED The machine has been set to automatically print a Transaction Report when a tran smission is not successful or when the Broadcast transmission function is used. The Transaction Repo rt informs you of the result of the operation. When the machine prints a Transa ction Report, be sure to check the contents. ...

  • Sharp AR-FX12 - page 81

    7-3 7 VIEWING THE COMMUNICA TION A CTIVITY REPOR T Your machin e keeps a reco rd of the most recent 99 tran sactions (bot h transmissi ons and receptio ns) that wer e performed. The re cord includes the dat e of the transaction, the othe r party's name, the dur ation, and resu lt. You can have the repor t automatically printed when the n umber ...

  • Sharp AR-FX12 - page 82

    7-4 PR OBLEMS AND SOLUTIONS If you experience a problem with the fa x function, first chec k the following table. If you cannot solve the problem using the following table, see chapter 6 of the Ope ration manu al (for genera l information and copier operation). Prob lem Check Solution Pag e The machine does not operate. Is the fax power switch turn ...

  • Sharp AR-FX12 - page 83

    PROBLEMS AND SOLUTIONS 7-5 7 Printing does not take place after reception. Does a mess age appear in the display instructing yo u to add toner or paper? (Printing is not possible.) Restore printing capability as instructed by the disp lay message. Printing will begin. "WHEN AN ALARM SOUNDS AND A WARNING MESSA GE IS DISPLAYED", page 7-3. A ...

  • Sharp AR-FX12 - page 84

    ...

  • Sharp AR-FX12 - page 85

    8-1 CHAPTER 8 KEY OPERA T OR PR OGRAMS This chapter explain s the key operat or programs that are used by the administrato r of the machin e to customize ce rtain funct ions and settings. Page KEY OPERATOR PROGRAMS .................... ................ ................. ......... 8-2  KEY OPERATOR PROGRAM LI ST................................... ...

  • Sharp AR-FX12 - page 86

    8-2 KEY OPERA T OR PR OGRAMS This chapter explains key operator pr ograms that are relate d to the fax function. For key operator progra ms that are related to gener al use of the machine, see the key operator progr ams manual. KEY OPERA T OR PROGRAM LIST NO TE You may not be able to use all of the programs in the key operator program list. Program ...

  • Sharp AR-FX12 - page 87

    KEY OPERATOR PROGRAMS 8-3 8 USING THE KEY OPERA T OR PROGRAMS Follow these steps to configure the settin gs in the key operator programs. 1 Press the [CUST OM SETTINGS] key . 2 T ouch the [KEY OPERA TOR PR OGRAMS] key . 3 Use the numeric ke ys to enter the five-digit key operator c ode number . For the factory default setting for the key operator c ...

  • Sharp AR-FX12 - page 88

    KEY OPERA TOR PR OGRAMS 8-4 KEY OPERA T OR PROGRAMS The key operator program s for the fax function of the machine are explained he re. For key operator prog rams that are related to the copy function and genera l use of the machine, see the key operator's guide. For progr ams related to the printer an d network scanner functions, see the corr ...

  • Sharp AR-FX12 - page 89

    KEY OPERATOR PROGRAMS 8-5 8 Scan complete sound setting You can select whether or not a b eep sound is made after an original is scan ned on the scan ner unit. Normally a beep sound is made. You can select "High" or "Low " for the v olume of the beep. Default exposure settings This program is used to set the default exposure lev ...

  • Sharp AR-FX12 - page 90

    KEY OPERA TOR PR OGRAMS 8-6 P ause time setting This setting is used to select the duration of pauses that are inserted in destination fa x numbers. Normally the setting is 2 seconds, which means that each time the [PAU SE] key is touched when dialing or storing a fax number, a pause of 2 seconds is inserted. The pause ti me can be set to any nu mb ...

  • Sharp AR-FX12 - page 91

    KEY OPERATOR PROGRAMS 8-7 8 ECM (This setting is o nly eff ective if the other mac hine is a G3 machine that suppor ts ECM) Line conditions can sometimes distort a transmitted fax image. When ECM (Error Correction Mode) is turne d on, pages that are distorted are automatica lly re-transmitted. This setting is initially turned on. If turned off, dis ...

  • Sharp AR-FX12 - page 92

    KEY OPERA TOR PR OGRAMS 8-8 Call timer at memory sending When sending a fax b y automatic transmission (See "Storing transmission jobs (memory transmission)" on page 2-8. ), this setting lets you select the amount of time that the mach ine waits before breaking t he connection when the other machine does not respond to your machine's ...

  • Sharp AR-FX12 - page 93

    KEY OPERATOR PROGRAMS 8-9 8  F ax receive settings The fax reception settings allo w you to adjust certain parameters for receiving faxes to better suit your n eeds. Settings that can be adju sted depend on the peripheral devices installed. The "Fax receive settings" a re as follows:  Auto receive reduce setting  Number of calls ...

  • Sharp AR-FX12 - page 94

    KEY OPERA TOR PR OGRAMS 8-10 Anti junk fax setting This program is used to enter fax numb ers from which you wish to block fax reception. Up to 50 (maximum of 30 on the AR-M3 51N/AR-M451N/ AR-M351U/AR-M451U) numbers can be entered. This program is normally disa bled. To block reception fr om the entered fax numbers, touch the [VALID] key. 1 T ouch ...

  • Sharp AR-FX12 - page 95

    KEY OPERATOR PROGRAMS 8-11 8 3 Press the numeric ke ys to store the fax numb er . Up to 20 digits can be entered. To enter a "+", press the " " key. To enter a hyphen, touch the [PAUSE] key. To enter a space, touch the [SPACE] key. If you make a mistake, press the [C] key and re-enter the correc t digit. 4 T ouch the [OK] key . ...

  • Sharp AR-FX12 - page 96

    ...

  • Sharp AR-FX12 - page 97

    9-1 CHAPTER 9 APPENDIX This chapter co ntains refere nce informatio n regarding the fax features of the mach ine. Page SPECIFICA TIONS .............. ................. ................. ................. ................. 9-2 INDEX ........ ................. ................. .............. ................. ................. ........... 9-3 ...

  • Sharp AR-FX12 - page 98

    9-2 SPECIFICA TIONS For information on power r equirements, power consumption, dimensions, weight, and othe r specifications that are common to all features of the machine, refer to page 8- 2 of "Operation manual (for general information and copier operation)". *1 Transmission speed is for a n A4 or 8-1/2" x11" do cument with ap ...

  • Sharp AR-FX12 - page 99

    9-3 9 INDEX  Numerics 2in1 ........ ................ ............. ................ ................ ... 3-7  A Activity report print select setting ..................... ...... 8-6 Address book ................ ................ ................ .. 1-4, 2-4 Address book screen ............................. ................ 1-5 Address review ...

  • Sharp AR-FX12 - page 100

    INDEX 9-4  N Number of calls in auto re ception .. ................ ......... 8-9  O One-touch dialing ................ ................ .......... 1-12, 2-4 One-touch key display... ................ ................ ......... 1-5 One-touch keys ................ ................ ............... 6-3, 6-5 On-hook dialing ............. ......... ...

  • Sharp AR-FX12 - page 101

    INDEX 9-5 9 Special modes.. ................ ................ ............. ......... 1-4 -2in1 .............. ............. ................ ................ ......... 3-7 -Card shot .............. ................ ................. .. 3-8 to 3-9 -Dual page scan ..... ................ ................. ............ 3-5 -Edge erase......... ....... ...

  • Sharp AR-FX12 - page 102

    ...

  • Sharp AR-FX12 - page 103

    ...

  • Sharp AR-FX12 - page 104

    PRINTED IN FRANCE TINSE2787GHZZ AR-FX12 ...

Manufacturer Sharp Category Fax Machine

Documents that we receive from a manufacturer of a Sharp AR-FX12 can be divided into several groups. They are, among others:
- Sharp technical drawings
- AR-FX12 manuals
- Sharp product data sheets
- information booklets
- or energy labels Sharp AR-FX12
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sharp AR-FX12.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sharp AR-FX12, service manual, brief instructions and user manuals Sharp AR-FX12. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sharp AR-FX12.

Similar manuals

A complete manual for the device Sharp AR-FX12, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sharp AR-FX12 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sharp AR-FX12.

A complete Sharp manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sharp AR-FX12 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sharp AR-FX12, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sharp AR-FX12, that we can find in the current document
3. Tips how to use the basic functions of the device Sharp AR-FX12 - which should help us in our first steps of using Sharp AR-FX12
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sharp AR-FX12
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sharp AR-FX12 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sharp AR-FX12?

Use the form below

If you did not solve your problem by using a manual Sharp AR-FX12, ask a question using the form below. If a user had a similar problem with Sharp AR-FX12 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)