Manual Honeywell MN10CESWW

20 pages Not applicable
Download

Go to site of 20

Summary
  • Honeywell MN10CESWW - page 1

    8 OWNER’S MANUAL Read these instructions before use Voltage rating: 120V~60Hz Power rating : 1100W (MN12CES) Power rating : 900W (MN10CESWW) Portable Air Conditioner Model: MN12CES / MN10CESWW Customer Support : 1-800-474-2147 For product inquiries or support : www.honeywellportableac.com Made in China ...

  • Honeywell MN10CESWW - page 2

    THANK YOU..................................................................................................... INDEX .............................................................................................................. 1 2 3 4 6 7 13 15 16 USER TIPS............................................................................................ ...

  • Honeywell MN10CESWW - page 3

    Congratulations on your purchase of this versatile Honeywell Portable Air Conditioner. Honeywell Portable Air Conditioners are ideal for spot cooling. The compressor, condenser and evaporator are housed in a compact unit. The air is filtered, dehumidified and cooled while a flexible air outlet hose sends heat outside. The air conditioner includes a ...

  • Honeywell MN10CESWW - page 4

    3 USER TIPS To ensure optimal efficiency of the product, keep doors and windows closed when it is used as an air conditioner or dehumidifier. If the product is being used with the fan function only, an open window could improve air circulation. Important : Before installing the unit, place it UPRIGHT for 20 minutes before use to allow the refrigera ...

  • Honeywell MN10CESWW - page 5

    4 SAFETY WARNING READ AND SAVE THESE INSTRUCTIONS Improper handling can cause serious damage to the appliance. DO NOT operate the unit with a damaged plug or loose wall outlet. If the power cord is damaged, it must be replaced by the manufacturer or an authorized service agent. DO NOT cover the air intake and exhaust when in use. This appliance is ...

  • Honeywell MN10CESWW - page 6

    DO NOT run the power cord under carpeting and rugs. Use caution to prevent tripping on cord. DO NOT use in areas where gasoline, paint or other flammable goods are stored. Basic safety precautions should always be followed when using electrical appliances. 8. 9. 10. 11. 5 SAFETY ...

  • Honeywell MN10CESWW - page 7

    6 PARTS DESCRIPTION 1. Control Panel (Incl. Signal Receptor) 2. Air Outlet 3. Handle 4. Casters 5. Upper Drain Plug 6. Air Filter 7. Back Grill 8. Lower Drain Plug 9. Power Supply Cord 10. Exhaust Hose Connector 11. Remote Control 1 2 5 3 x 1 x 1 x 2 x 1 Installation Kit : 1. Window Bracket Kit............................. 2. Window Bracket Panel A ...

  • Honeywell MN10CESWW - page 8

    7 INSTALLATION Install the plastic hose with window bracket adapter and hose connector on both sides. Ensure proper fit on both ends. Adjust the window bracket as per width or height of your window and insert the plastic pins to fix at the desired position. Note : Do not install the window bracket to your window. This step is required only to adjus ...

  • Honeywell MN10CESWW - page 9

    Connect the window bracket to the opposite end of the plastic hose. Ensure that all connections are tight and installed properly. 8 INSTALLATION 8 8 4 5 Connect the window bracket to the window. 6 The Portable Air Conditioner is now ready to use. ...

  • Honeywell MN10CESWW - page 10

    The supplied exhaust hose can be extended from 12 inches (1 foot) to 47 inches (3.9 feet). Do not bend (to the extent shown below) the exhaust hose. A bent hose will block exhaust air and cause the unit to malfunction or shut-off. The length of the exhaust hose is determined by the product specifications. Do not replace or lengthen it as this could ...

  • Honeywell MN10CESWW - page 11

    10 USE & OPERATION Touch Screen Control Panel Power Control Warning Light (when flashing) Mode Control Timer Control Timer / Temperature Set Controls Fan Speed Control After switching the air conditioner off, you must wait 3 minutes before switching it back on again. Power Control The Power Control turns the unit on and off. Mode Control 3 sett ...

  • Honeywell MN10CESWW - page 12

    Note : Do not place the remote control in direct sunlight. Timer Control Temperature / Timer Set Mode Control Cool Dehumidify Fan In running mode: Auto switch off In stand-by mode: Auto switch on Press “ ▼ “ or “ ▲ “ button to adjust the time setting for 1 hour intervals. Control • Used for adjusting the timer and temperature. • The ...

  • Honeywell MN10CESWW - page 13

    Battery Installation: Remove the cover on the back of the remote control and insert two AAA batteries with ‘‘+’’ and ‘‘-’’ pointing in the proper direction. • Use only two AAA or IEC R03 1.5V batteries. • Remove the batteries if the remote control is not in use for a month or longer. • All batteries should be replaced at the s ...

  • Honeywell MN10CESWW - page 14

    13 CLEANING & MAINTENANCE Appliance Maintenance: 1. Turn off the appliance before disconnecting the power supply. 2. Always clean the appliance with a soft dry cloth. Air Filter Maintenance: The air filter should be cleaned every two weeks. Clean it as follows: 1. 2. Turn off the appliance and remove the air filter. (refer to page 5, #6) Rinse ...

  • Honeywell MN10CESWW - page 15

    When there is excess water condensation inside the unit, the air conditioner stops running and shows a warning light (refer to page 10). This warning light indicates that the water condensation needs to be drained using the following procedures: WATER CONDENSATION DRAINAGE 14 Continuous Draining While using the unit in dehumidifier mode, continuous ...

  • Honeywell MN10CESWW - page 16

    The following troubleshooting guide addresses the most common problems. If problems persist, call customer service. Unplug and disconnect the appliance from the power source before attempting to troubleshoot. 15 TROUBLESHOOTING GUIDE Will not run and water full indicator light is ON • No electricity. • Batteries in the remote control need to be ...

  • Honeywell MN10CESWW - page 17

    TECHNICAL SPECIFICATIONS 16 Electrical products should be properly disposed. Please recycle where facilities exist. Check with your local authority or retailer for recycling. Description of Product Portable Air Conditioner MN12CES Model 120 V~ 60 Hz Voltage/Frequency 1100W Power Consumption 12000 BTU Cooling capacity Dehumidifying capacity 70 pints ...

  • Honeywell MN10CESWW - page 18

    17 SERVICE AND WARRANTY 5-YEAR LIMITED WARRANTY 1st year parts and labor. 5 years on all parts of the sealed system, consisting of the compressor, evaporator, condenser and factory connected refrigerant tubing. This warranty does not apply to any damage resulting from abusive, unreasonable use or damage. Defects that are the result of normal wear a ...

  • Honeywell MN10CESWW - page 19

    SERVICE AND WARRANTY 18 Please read the Instruction Manual carefully before setting up or using this product. If you believe this product to be suffering from a manufacturing fault, or if you have inquiries about this product, please contact our Customer Support: When contacting our Customer Support, please have the information below along with the ...

  • Honeywell MN10CESWW - page 20

    MN12CES&MN10CESWW_IM_Eng_USA_10 January 2013 © 2013 AirTek Int’l Corp. Ltd. (JMATEK Int’l Group of Companies) The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representation or warranties with respect to this product. This product is Manufactured by Airtek International C ...

Manufacturer Honeywell Category Air-conditioning

Documents that we receive from a manufacturer of a Honeywell MN10CESWW can be divided into several groups. They are, among others:
- Honeywell technical drawings
- MN10CESWW manuals
- Honeywell product data sheets
- information booklets
- or energy labels Honeywell MN10CESWW
All of them are important, but the most important information from the point of view of use of the device are in the user manual Honeywell MN10CESWW.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Honeywell MN10CESWW, service manual, brief instructions and user manuals Honeywell MN10CESWW. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Honeywell MN10CESWW.

Similar manuals

A complete manual for the device Honeywell MN10CESWW, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Honeywell MN10CESWW by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Honeywell MN10CESWW.

A complete Honeywell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Honeywell MN10CESWW - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Honeywell MN10CESWW, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Honeywell MN10CESWW, that we can find in the current document
3. Tips how to use the basic functions of the device Honeywell MN10CESWW - which should help us in our first steps of using Honeywell MN10CESWW
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Honeywell MN10CESWW
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Honeywell MN10CESWW in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Honeywell MN10CESWW?

Use the form below

If you did not solve your problem by using a manual Honeywell MN10CESWW, ask a question using the form below. If a user had a similar problem with Honeywell MN10CESWW it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)