Manual Hobart SLA-2 ML-44180

12 pages 1.32 mb
Download

Go to site of 12

Summary
  • Hobart SLA-2 ML-44180 - page 1

    © HOBART 2006 F33995 (Rev. A, 6/06) Security Label Applier Operator Manual Model SLA-1, SLA-2 ML-44180 SLA-2A ML-44197 SLA-3 ML-44192 701 S. RIDGE AVENUE TROY, OHIO 45374 937 332-3000 www.hobartcorp.com ...

  • Hobart SLA-2 ML-44180 - page 2

    F33995 (Rev. A, 6/06) Page 2 of 12 © HOBART 2006 Security Label Applier (SLA) SAVE THESE INSTRUCTIONS Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment ...

  • Hobart SLA-2 ML-44180 - page 3

    © HOBART 2006 Page 3 of 12 F33995 (Rev. A, 6/06) Security Label Applier The Security Label Applier (SLA) is designed to apply an Electronic Article Surveillance (EAS) label to a standard Ultima scale label. The SLA works in conjunction with an Ultima (with remote keypad) and an Ultima Wrapping System (UWS), Compact Label Applier (CLA) or Indexing ...

  • Hobart SLA-2 ML-44180 - page 4

    F33995 (Rev. A, 6/06) Page 4 of 12 © HOBART 2006 Note If used with an HWS or NSW Semi Automatic System, the security label is automatically placed on the Ultima scale label. The Operator then hand applies the labels to the package. There are two types of security labels available. Depending on your store security system, you will either use the Ch ...

  • Hobart SLA-2 ML-44180 - page 5

    © HOBART 2006 Page 5 of 12 F33995 (Rev. A, 6/06) 1. At the Ultima Keypad, PRESS [SUPER MENU ON/OFF]. If applicable, enter your Secret ID. The Supervisor Menu displays. 2. PRESS [F5] to select Scale Setup Menu. 3. PRESS [F3] to select Labels Menu. 4. PRESS [F6] to select Security Labels. ...

  • Hobart SLA-2 ML-44180 - page 6

    F33995 (Rev. A, 6/06) Page 6 of 12 © HOBART 2006 5. From the Security Labels screen, enter the minimum Unit Price and/or the minimum Total Price. A security label will be applied to any package with a Unit Price and/or Total Price that is the same as or higher than the amounts entered. If the Unit Price and Total Price are lower than the entered p ...

  • Hobart SLA-2 ML-44180 - page 7

    © HOBART 2006 Page 7 of 12 F33995 (Rev. A, 6/06) 3. Use the numeric keypad to enter PLU number in the Product number and PRESS [ENTER]. 4. PRESS [F2] to select Apply Security Label. 5. PRESS [ESC] to return to the Start a Run screen. Operating the SLA Once set up, the SLA runs with minimal operator intervention. The labels are automatically genera ...

  • Hobart SLA-2 ML-44180 - page 8

    F33995 (Rev. A, 6/06) Page 8 of 12 © HOBART 2006 Loading Labels The SLA contains a label sensor to alert the operator when out of labels or when labels are not advancing. When applicable, the message Out of Security Labels displays on the Ultima console and a beep sounds to alert the operator. Although, when out of security labels, the Ultima merc ...

  • Hobart SLA-2 ML-44180 - page 9

    © HOBART 2006 Page 9 of 12 F33995 (Rev. A, 6/06) Fig 1 Fig 2 Fig 3 Fig 4 ...

  • Hobart SLA-2 ML-44180 - page 10

    F33995 (Rev. A, 6/06) Page 10 of 12 © HOBART 2006 Cleaning and Maintaining Maintain the SLA by regularly cleaning the paper dust from inside the unit. Clean the SLA exterior surfaces with a cloth and warm water/detergent solution. When cleaning, be sure to protect the unit from direct water entry. To clean the SLA: 1. Dampen a soft cloth with mild ...

  • Hobart SLA-2 ML-44180 - page 11

    © HOBART 2006 Page 11 of 12 F33995 (Rev. A, 6/06) SYMPTOMS POSSIBLE CAUSES/REMIDIES Multiple labels are issued followed by an audible beeping sound. 1. Verify labels threaded correctly. 2. Call local Hobart office. No label is issued followed by an audible beeping sound . 1. Out of security labels. 2. Missing security labels on backing paper. 3. V ...

  • Hobart SLA-2 ML-44180 - page 12

    © HOBART 2006 F33995 (Rev. A, 6/06) ...

Manufacturer Hobart Category Label Maker

Documents that we receive from a manufacturer of a Hobart SLA-2 ML-44180 can be divided into several groups. They are, among others:
- Hobart technical drawings
- SLA-2 ML-44180 manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart SLA-2 ML-44180
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart SLA-2 ML-44180.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart SLA-2 ML-44180, service manual, brief instructions and user manuals Hobart SLA-2 ML-44180. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart SLA-2 ML-44180.

A complete manual for the device Hobart SLA-2 ML-44180, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart SLA-2 ML-44180 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart SLA-2 ML-44180.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart SLA-2 ML-44180 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart SLA-2 ML-44180, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart SLA-2 ML-44180, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart SLA-2 ML-44180 - which should help us in our first steps of using Hobart SLA-2 ML-44180
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart SLA-2 ML-44180
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart SLA-2 ML-44180 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart SLA-2 ML-44180?

Use the form below

If you did not solve your problem by using a manual Hobart SLA-2 ML-44180, ask a question using the form below. If a user had a similar problem with Hobart SLA-2 ML-44180 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)