Manual IBM 412CID

36 pages 0.29 mb
Download

Go to site of 36

Summary
  • IBM 412CID - page 1

    1 MODEL: IBM - 412 AD VANCED HOME/OFFICE 4 LINE TELEPHONE INSTALLATION AND OPERATION GUIDE Please read this manual carefully prior to installing your telephone. ...

  • IBM 412CID - page 2

    2 ...

  • IBM 412CID - page 3

    3 FCC INFORMATION ................................................................................................................... 5 IMPORTANT SAFETY INS TRUCTIONS ................................................................................... 6 BATTERY CAUTIONARY INSTRUCTIONS ................................................................. ...

  • IBM 412CID - page 4

    4 HEADSET OPERATION .............................................................................................................. 22 Headset Enable/Disable ............................................................................................................... 22 Headset Assembly ............................................................. ...

  • IBM 412CID - page 5

    5 E quipment Notes: Your IBM - 412 telephone is registered with the Federal Communications Commission and is in compliance with Part 15J and Part 68 of the FCC Rules and Regulations. On the bottom of this equipment is a label ind i- cating among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for the equipment. Yo ...

  • IBM 412CID - page 6

    6 Before using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following: v Read and understand all instructions. v Follow all warnings and instruction s marked on the product. v Unplug this product from the wall telephone jack and power o ...

  • IBM 412CID - page 7

    7 B ATTERIES: CAUTION v Use only 1.5 volt, AA - size batteries, ( 15A) carbon - zinc or alkaline batter ies . (batteries not included.) v Do no t dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special disposal instructions. v Do not open or mutilate the batteries. Released electrolyte is corrosive and ...

  • IBM 412CID - page 8

    8 P ACKAGE CONTENTS 1. Check to be sure that you have all the following components in the package: 2. Telephone base. 3. Handset. 4. Headset. 5. No rmal telephone line cord (2 pc’s). 6. Short telephone line cord. 7. Handset Coiled cord. 8. Handset “Y” adapter. 9. AC power adapter. 10. Quick Reference Guide. 11. This instruction manual. (batte ...

  • IBM 412CID - page 9

    9 Model IBM - 412 Top View Model IBM - 412 Rear View LOCATION OF CONTROLS AND FEATURES L3/L4 Jack L1/L2 Jack DATA Jack ADAPTER Jack L3/L4 L1/L2 DATA ADAPTER 12VDC 400mA STORE SHIFT FLASH LINE 4 TRNSFR LINE 3 REDIAL LINE 2 MUTE LINE 1 HOLD SPKR HEADSET CONF DND PAGE ICM 123 ABC DEF GHI JKL MNO 456 * 0 # PQRS TUV WXYZ 7 89 qp VOLUME Do Not Disturb Ke ...

  • IBM 412CID - page 10

    10 U SEFUL FEATURES AND T ERMS Auto Line Selection — Automatically selects first available line for outgoing calls. Automat i- cally selects ringing line for incoming calls. Auto Redial — Redials the last number dialed approximately every 60 seconds. Call Privacy — Ensures that no one can access your call while you are on the line. Call Trans ...

  • IBM 412CID - page 11

    11 LIGHTS AND CADENCE R EFERENCE LIST LED Status Indication Lines 1 - 4 Off Line is not in use Flashing Slowly Incoming outside call is ringing On Steady Line is in use by another extension or phone line is not connected To that Line. Flashing Rapidly Line is on hold by your extension Blink 1 Line in use by you Blink 2 Line on hold by another exten ...

  • IBM 412CID - page 12

    12 S ELECTING A LOCATION TO INSTALL YOUR TELE PHONE The phone may be used on a desk or mounted on a wall. Select a location which meet s the following requirements: 1. Near an AC electrical outlet. 2. Near a telephone line jack. 3. Away from any electrical machinery, appl iances, and metal walls or filing cabinets. INSTALLING THE BATTE RIES The pho ...

  • IBM 412CID - page 13

    13 CAUTION: 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet loc a- tions. 3. Never touch un - insulated telephone wires or terminals unless the incoming telephone line has been disconnected at the network interface. 4. Use caution when ins ...

  • IBM 412CID - page 14

    14 COUNTER TOP/DESK TOP INSTALLATION 1. For lines 1 and 2, plug the telephone line cord (provided with the telephone) into the L1/L2 jack as indicated on the rear base of the telephone. 2. For lines 3 and 4, plug the other telephone line cord (provi ded with the telephone) into the L3/L4 jack as indicated on the rear base of the telephone. 3. Inser ...

  • IBM 412CID - page 15

    15 Adjusting the Viewing Angle Brackets Adjust the viewing angle brackets (one on each side of the phone) to position the phone to the desired viewing angle. Take care to keep the right side bracket on the right side of the phone and the left bracket on the l eft side of the phone. These brackets are not interchangeable. The character R or L appear ...

  • IBM 412CID - page 16

    16 Wall Mounting Instructions: 1. Pick up the handset. 2. Slide the handset catch (immediately in front of handset hook flash lever) up a nd off the handset cradle. 3. Rotate the handset catch a half turn and slide it back into the slot. 4. The handset catch should now e xtend over the edge. 5. Turn the phone upside down so the underside of the pho ...

  • IBM 412CID - page 17

    17 L IST OF SYSTEM DEFAUL TS The default telephone setup is as follows: You may clear all programmed data and all the param eters will revert to the above default values. To do this: 1. Press [STORE]. 2. Press [*], [#], [*], [#]. 3. Press [MUTE]. 4. A short ring w ill be heard to signal successful programming. ASSIGNING EXTENSION NUMBERS (11 THROUG ...

  • IBM 412CID - page 18

    18 N OTE: The programmable speed dial keys double in function as Direct, Station to Station (DSS) keys. The uppermost left key is ext ension (Station) 11, the next key to the right is extension 12, etc. When using the features intercom (ICM) and page, extensions may be dialed by pressing these keys even after each key has also been programmed as a ...

  • IBM 412CID - page 19

    19 4. Press [0], [1] for ON or [0], [0] for OFF. 5. Press [MUTE]. 6. A short ring will be heard to signal successful programming. NOTE: The default value is ON for all 4 lines. ADJUSTING VOLUME LEV ELS Adjusting Ringer Volume There are 3 levels of volume adjustment (l ow, middle, and high) for the ringer. 1. Press the [VOLUME] key (beneath the dial ...

  • IBM 412CID - page 20

    20 MAKING AN OUTGOING C ALL Using the Handset 1. Lift the handset. The first available line is automatically selected. 2. Dial desired num ber. The display will show the digits as they are dialing. 3. At the end of the call, return the handset to the base. Using the Spe akerphone (hands free) 1. Press the speakerphone [SPKR] key. The first availabl ...

  • IBM 412CID - page 21

    21 USING AUTO REDIAL If the phone number dialed is busy or not answered, the phone can automatically redial the number approximatel y every 60 seconds up to 10 times. 1. Press an available [LINE] key [LINE1, LINE2, LINE3, or LINE4] 2. Press [REDIAL]. The [REDIAL] LE D will flash and the [MUTE] key will be lit, indicating the phone is in Auto Redial ...

  • IBM 412CID - page 22

    22 A headset has been included for your convenience to provide optional hands - free operation. 1. To use the headset, you must ENABLE i t. The default value is DISABLE. 2. Once headset operation mode is enabled, your telephone unit won’t detect the status of the hook switch (under the handset). 3. On - hook and off - hook functions are then acti ...

  • IBM 412CID - page 23

    23 MAKING AN OUTGOING C ALL USING THE HEADSE T 1. The [SPKR] LED will flash to indicate the phone is in headset mode. 2. Press the [SPKR] k ey. An available line is automatically selected. 3. Dial the desired number, using standard dial pad, speed dial or redial keys. A NSWERING AN INCOMING CALL USING THE HEAD SET 1. Press the flashing [LINE] key ( ...

  • IBM 412CID - page 24

    24 T he Intercom function allows extension - to - extension conversations (phones must be connected to [LINE 1]). That means you can spea k with another party without having to dial seven digits (using an outside line). As you direct an intercom call to an extensio n that extension will ring and display a flashing ICM LED. DIRECT STATION SELEC T (D ...

  • IBM 412CID - page 25

    25 A NSWERING AN INTERCOM CALL Answering an Intercom Call with the Handset 1. Lift the handset. You will know you are receiving an inter com call because the [ICM] LED flashes, and you will hear the distinct ICM ring (a double ring). 2. Your phone will automatically connect the intercom call, so you are free to begin your convers a- tion. Answering ...

  • IBM 412CID - page 26

    26 P aging differs from Intercom calling in that the party called does not have to answer the phone in order to hear your message. This permits the caller to broadcast a message to one or all other phone exte n- sions. PAGING A SPECIFIC EX TENSION (INDIVIDUAL PAGE) 1. Press the [PAGE] key. (You may use the handset, headset or speakerphone to place ...

  • IBM 412CID - page 27

    27 P AUSE You may use this feature to create a dialing pause between digits during a call. Typically, the PAUSE function is most usef ul for programming dialing delays in long number sequences of certain Speed Dial numbers such as voicemail codes, international phone numbers, and personal banking authorizations. Each time you press the [REDIAL] key ...

  • IBM 412CID - page 28

    28 1. T o activate the DND function, press the [DND] key. 2. To cancel DND, press the [DND] key again. LINE PRIVACY A line in use will al ways maintain privacy unless you cancel it to allow other phones in the system to join your call. Line Privacy is active by defa ult to ensure conversation privacy. 1. To cancel Line Privacy: While speaking, pres ...

  • IBM 412CID - page 29

    29 3. P ress the [SHIFT] key. 4. Press the desired Speed Dial key. A short ring will be heard to signal successful programming. The [SHIFT] LED will revert to dark immediately after pressing the Speed Dial key. Storing the Last Number Dialed into the First G roup of Speed Dial Memory 1. Press the [STORE] key. 2. Press [REDIAL]. 3. Press the Speed D ...

  • IBM 412CID - page 30

    30 2. P ress [*]. 3. Press [SHIFT]. 4. Press the Speed Dial key that you wish to erase. A ring tone will be heard signaling successful d e- l e tion of the Speed Dial number. CONFERENCE CALLING When speaking with an outside party, you can include a third person into the conversation for a three - person conference call. The third person may be an i ...

  • IBM 412CID - page 31

    31 TECHNICAL SPECIFICATIONS Flash Rate for Lights On Steady: Solid light. Flashing Slowly: 1 sec on, 1 sec off, repeatedly. Flashing Rapidly: 0.125 sec on, 0.125 sec off, repeatedly. Blink 1: 1.875 sec on, 0.125 sec off, repeatedly. Blink 2: 0.875 sec on, 0.125 sec off, repeatedly. Blink 3: 0.125 sec on, 0.875 sec off, repeatedly. Sound Rate of Int ...

  • IBM 412CID - page 32

    32 Y our IBM - 412 telephone has been designed to give years of trouble free service. It is a sensitive ele c- tr o mechanical instrument. To assure its longevity, please read the following maintenance instructions. 1. Keep the IBM - 412 away from heat as high temperatures can shorten the life of the electrical comp o- nents and distort or melt its ...

  • IBM 412CID - page 33

    33 Intercom, line status, auto - answer, privacy or auto - line selection are inoperable. v Check if Lines 1 and 2 are cross wired in the wall jack. v If used, see if you may have installed your 2 - line adapter incorrectly. v Be sure all extensions in the system are con nected to [LINE 1]. v Check the assigned extension codes, making sure they are ...

  • IBM 412CID - page 34

    34 Handset doesn’t appear to be working. v Check to see if your phone is in headset mode. If the [SPKR] key is flashing, you are in h eadset mode and need to deactivate this in order to turn on the handset. v Make sure the handset cord is connected at both ends. I ntercom service doesn’t appear to work. v Check to make sure the phone lines for ...

  • IBM 412CID - page 35

    35 S tatement of limited warranty: TT Systems LLC warrants that for a period of one year from the date of purchase that this pro d uct 1) is free from defects in materials and workmanship and 2) conforms to its specifications. If this product does not fun c tion as warranted during the warranty period, TT Systems LLC, at its option, will either rep ...

  • IBM 412CID - page 36

    36 PLACE THIS TEMPLATE ON THE WALL. THE LOCATION OF THE SCREWS IS INDICATED BY THE CENTERS OF THE CROSSED LINES. FASTEN THE SCREWS LEAVING 3/16" OF THE SCREW EXTENDING FROM THE WALL Remove This Page to Mark Wall 11A99 WALL MOUNTING TEMPLATE ...

Manufacturer IBM Category Cordless Telephone

Documents that we receive from a manufacturer of a IBM 412CID can be divided into several groups. They are, among others:
- IBM technical drawings
- 412CID manuals
- IBM product data sheets
- information booklets
- or energy labels IBM 412CID
All of them are important, but the most important information from the point of view of use of the device are in the user manual IBM 412CID.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals IBM 412CID, service manual, brief instructions and user manuals IBM 412CID. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product IBM 412CID.

Similar manuals

A complete manual for the device IBM 412CID, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use IBM 412CID by users. Manuals are usually written by a technical writer, but in a language understandable to all users of IBM 412CID.

A complete IBM manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual IBM 412CID - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the IBM 412CID, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the IBM 412CID, that we can find in the current document
3. Tips how to use the basic functions of the device IBM 412CID - which should help us in our first steps of using IBM 412CID
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with IBM 412CID
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of IBM 412CID in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning IBM 412CID?

Use the form below

If you did not solve your problem by using a manual IBM 412CID, ask a question using the form below. If a user had a similar problem with IBM 412CID it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)