Manual Pelco TLR2096

52 pages 0.36 mb
Download

Go to site of 52

Summary
  • Pelco TLR2096 - page 1

    TLR2096 Time-Lapse VCR Installation/ Operation Manual C651M (7/99) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA www.pelco.com In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150 International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120 ...

  • Pelco TLR2096 - page 2

    2 Pelco Manual C651M (7/99) CONTENTS Section Page 1.0 GENERAL .................................................................................................. 5 1.1 SAFEGUARDS, WARNINGS, CAUTION, AND CARE ...................... 6 1.2 REGULA T ORY NOTICES .................................................................. 8 1.3 UNP ACKING INSTRUCTI ...

  • Pelco TLR2096 - page 3

    Pelco Manual C651M (7/99) 3 8.2 TIMER RECORDING ........................................................................ 34 8.2.1 Programming Procedure ....................................................... 34 8.2.2 Special DW Settings ............................................................. 34 8.2.3 A void Mistakes When Using The T imer .... ...

  • Pelco TLR2096 - page 4

    4 Pelco Manual C651M (7/99) REVISION HISTOR Y Manual # Date Comments C651M 12/98 Original version. 7/99 Removed material on the optional remote control. Changed horizontal resolution specification. LIST OF T ABLES T able Page A Not Used B Call Out/T ape End ............................................................................. 24 C Recording ...

  • Pelco TLR2096 - page 5

    Pelco Manual C651M (7/99) 5 RISK OF ELECTRIC SHOCK DO NOT OPEN W ARNING W ARNING: T O REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SER VICEABLE P AR TS INSIDE REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the pre ...

  • Pelco TLR2096 - page 6

    6 Pelco Manual C651M (7/99) 1.1 SAFEGUARDS, W ARNINGS, CAUTION, AND CARE Observe the following W ARNINGS before installing and using this product. Follow all warnings and instructions marked on the VCR. Instructions Read all the safety and operating instructions before operating the VCR. Keep the instructions for future reference. Follow all operat ...

  • Pelco TLR2096 - page 7

    Pelco Manual C651M (7/99) 7 Cleaning Unplug the VCR from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Clean with a soft cloth slightly moistened with mild detergent and water. Wipe dry . NEVER USE PETROLEUM-BASED SOLUTIONS. Attachments Do not use attachments not recommended by Pelco as they may cause hazards. Accessories ...

  • Pelco TLR2096 - page 8

    8 Pelco Manual C651M (7/99) Care Of V ideo Cassette T ape 1. A void violent vibration and shock. 2. Do not place near a strong magnetic field (near a motor , transformer , or magnet). 3. Never place or store in direct sunlight. 4. A void dusty places. 5. Place the cassette in the cassette case and store vertically . 6. Never store tapes in a high h ...

  • Pelco TLR2096 - page 9

    Pelco Manual C651M (7/99) 9 2.0 OVER VIEW 2.1 INTRODUCTION TO TIME-LAPSE RECORDERS T ime-lapse recording permits longer than ordinary recording times. The primary reason for using time-lapse recording in a CCTV security system is that a single VCR tape can be used for an extended period of time beyond the standard record- ing time. The following ex ...

  • Pelco TLR2096 - page 10

    10 Pelco Manual C651M (7/99) • Automatic Head Cleaning —The VCR automatically removes foreign matter from the heads when a cassette is inserted for continuous smooth operation. • Easy Setup Using A Monitor —The on-screen menus simplify setup program- ming. Y ou can select these menus even without inputting a video signal. • Easy Cueing Wi ...

  • Pelco TLR2096 - page 11

    Pelco Manual C651M (7/99) 11 3.0 QUICK ST ART 3.1 BASIC ST AR T 1. Decide where to locate the VCR. Do all system hookups first (camera, multi- plexer , etc.) if you are installing the VCR in a location where you cannot ac- cess its rear panel. 2. Connect the VCR to other equipment (Sections 4.2 and 4.3). 3. Plug in the VCR and press the POWER butto ...

  • Pelco TLR2096 - page 12

    12 Pelco Manual C651M (7/99) 4.0 INST ALLA TION 4.1 PRE-INST ALLA TION CAUTIONS 1. Provide secure power to system components. Prevent overloading or shorting by dedicating power circuits to the surveillance equipment. Restrict access to the surveillance system circuit breakers, switches, and equipment power cords. 2. Surveillance system components ...

  • Pelco TLR2096 - page 13

    Pelco Manual C651M (7/99) 13 Figure 1. T ypical System Setup AUDIO OUT MIC IN VIDEO OUTPUT FROM CAMERA VIDEO IN AUDIO IN MONITOR VIDEO OUT CCTV CAMERA VIDEO IN MIC 600 Ω VIDEO OUT IN IN OUT MIC AUDIO RESET REMOTE SET RST IN REC GND ALM MODE CLK CALL OUT AUDIO IN ALARM OUTPUT FROM DEVICE SET IN ALARM DEVICE 4. If you are not using a switcher , ref ...

  • Pelco TLR2096 - page 14

    14 Pelco Manual C651M (7/99) 4.3 CONNECTING THE VCR TO A MUL TIPLEXER Figure 2 shows how to connect the VCR to an MX4000 Series Genex™ Multi- plexer . • For Automatic Speed T racking (“B” lines in Figure 2) This lets the VCR control the multiplexer ’ s recording speed. It is the most efficient recording method. 1. Connect the VCR’ s CLK ...

  • Pelco TLR2096 - page 15

    Pelco Manual C651M (7/99) 15 5.0 CONTROLS 5.1 FRONT P ANEL REW FF JOG/ADJUST CLEAR/ ENTER/ SHUTTLE REC STOP PLAY POWER EJECT PICTURE TRACKING POSITION/ VERTICAL ADJUST REC/PLAY MODE COUNTER RESET COUNTER MEMORY/ SKIP/INDEX PAUSE/ SHUTTLE HOLD DISPLAY TIMER REC VIDEO SOFT SHARP COLOR B/W Fluorescent display 1. POWER button Press for on; press again ...

  • Pelco TLR2096 - page 16

    16 Pelco Manual C651M (7/99) 5.2 FLUORESCENT DISPLA Y 1. M (counter memory) indicator Illuminates during rewind for counter memory mode. 2. PL (power loss) indicator Illuminates when there is a power failure during recording. 3. ALARM indicator Flashes during alarm recording and stays on when the alarm recording is finished. 4. INDEX indicator Flas ...

  • Pelco TLR2096 - page 17

    Pelco Manual C651M (7/99) 17 5.3 REAR P ANEL Figure 5. Rear View 1. AC power socket The power cord plugs into this socket. Insert the cord firmly . 2. SET IN terminal (Alarm) input terminal to start alarm recording. Connect the alarm sensor here. 3. RST (reset) IN terminal Input terminal to stop alarm recording when ALARM REC DURA TION in the Recor ...

  • Pelco TLR2096 - page 18

    18 Pelco Manual C651M (7/99) (This page intentionally left blank.) ...

  • Pelco TLR2096 - page 19

    Pelco Manual C651M (7/99) 19 6.0 PROGRAMMING 6.1 GENERAL PROGRAMMING INSTRUCTIONS The following is a universal procedure that shows how programming is done on the VCR. Use the JOG dial to select items, the SHUTTLE ring to the right to enter, and SHUTTLE ring to the left to exit. 1. Press the DISPLA Y button. The Main menu is displayed. 2. T urn the ...

  • Pelco TLR2096 - page 20

    20 Pelco Manual C651M (7/99) 6.2 QUICK GUIDE TO TLR2096 MENU STRUCTURE The operating parameters of the VCR are set through various on-screen menus. Program your choices on the menus according to the instructions on the following pages. Figure 7. Menu Tree 11 – 11 – 97 09 : 21 : 01 < RECORDING SET UP > 2H 1M OFF < MAIN MENU > DISPLAY ...

  • Pelco TLR2096 - page 21

    Pelco Manual C651M (7/99) 21 6.3 MAIN MENU • DISPLA Y Sets the display format of the time and date on the monitor. • TIME DA TE SEARCH Sets the time/date and direction to search for a desired location on a tape. • TIMER PROGRAM Sets the timed recordings. • RECORDING SET UP Sets the alarm recording mode, alarm recording duration, and emergen ...

  • Pelco TLR2096 - page 22

    22 Pelco Manual C651M (7/99) 6.5 TIME DA TE SEARCH MENU On this menu you set the date, time, and direction to search for the desired location on a tape. TIME Turn the JOG dial to set the hour and minute to search for. DATE Turn the JOG dial to set the day of the month to search for. DIRECTION Turn the JOG dial to select the starting direction of th ...

  • Pelco TLR2096 - page 23

    Pelco Manual C651M (7/99) 23 Figure 1 1. T imer Program Illustration <TIMER PROGRAM> DW START END HR 1 - - - - - : - - - - : - - - - - 2 DAY 08 : 40 17 : 25 L18EP 3 MON 22 : 00 22 : 50 72EP 4 WED 22 : 00 22 : 50 96EP 5 SPL 20 : 30 23 : 30 2SP 6 MON 10 : 10 11 : 15 SKIP 7 SUN 23 : 30 00 : 15 6EP 8 MON 21 : 00 21 : 54 2SP SPECIAL DW MON-FRI Pro ...

  • Pelco TLR2096 - page 24

    24 Pelco Manual C651M (7/99) 6.7 RECORDING SET UP MENU ALARM REC Sets the alarm recording mode. When you turn the JOG dial, the MODE display switches in the following order: 2H, 6H, L18H, 2H. (Refer to Section 8.3.3 for programming instructions.) ALARM REC Sets the length of the alarm recording period. When you turn the DURATION JOG dial, the displ ...

  • Pelco TLR2096 - page 25

    Pelco Manual C651M (7/99) 25 CLOCK OUT Sets the number of frames or fields to record (depending on the recording mode) at the CLOCK OUT terminal. 1. First, set the recording mode for the CLOCK OUT pulse output in the Rear Terminal menu. • REC – When recording in any mode. • T/L-REC – When recording in time-lapse mode (L18H, 72H, 96H). 2. Se ...

  • Pelco TLR2096 - page 26

    26 Pelco Manual C651M (7/99) POWER LOSS Turn the SHUTTLE ring to the right and the words POWER LIST CLEAR LOSS LIST CLEAR will be displayed. When you turn the SHUTTLE ring to the left, the list will be cleared. Turn the SHUTTLE ring to the right to return to the Maintenance menu. ALARM LIST Turn the SHUTTLE ring to the right and the words ALARM LIS ...

  • Pelco TLR2096 - page 27

    Pelco Manual C651M (7/99) 27 DISPLA Y MODE 2 1. Month-Day-Y ear 2. Day of the week 3. Alarm recording number 4. Hour:Minute:Second 5. Daylight Savings T ime symbol or power failure symbol 6. Recording mode • A 24-hour display is used: 00:00 indicates midnight; 12:00, noon; and 15:00, 3 p.m. • The day of the week is automatically set. • An ala ...

  • Pelco TLR2096 - page 28

    28 Pelco Manual C651M (7/99) 6. Do the following to advance the clock by one hour and set Daylight Savings to ON: T urn the SHUTTLE ring to the right. The DA YLIGHT SA VINGS display will flash. Turn the JOG dial to select ON. • The clock advances by one hour and the Daylight Sav- ings T ime symbol ( ) will be displayed next to the present time di ...

  • Pelco TLR2096 - page 29

    Pelco Manual C651M (7/99) 29 7.0 LOADING/UNLOADING/PROTECTING THE T APE CASSETTE Y ou can load video cassette tapes into your VCR as long as it is plugged into a power source. Loading a cassette automatically turns the VCR on even if its power switch is turned off. Use only video cassette tapes marked VHS. Use only standard grade VHS cassette tapes ...

  • Pelco TLR2096 - page 30

    30 Pelco Manual C651M (7/99) 8.0 RECORDING 8.1 MANUAL RECORDING See Figure 18. 1. Load a cassette with the erasure prevention tab intact. 2. Press the REC/PLA Y MODE buttons (+/-) to select the desired recording mode. 3. Use the VIDEO switch to pick either color or black and white (B/W) recording. (Do not connect color and black and white cameras t ...

  • Pelco TLR2096 - page 31

    Pelco Manual C651M (7/99) 31 8.1.2 Record Check Function When the VCR is recording, press the PLA Y button for more than 1.5 seconds and then release. The tape rewinds a little and then plays back the recording just made. When the tape reaches the spot where you pressed the PLA Y button, the VCR returns to record mode. 8.1.3 Audio Recording Either ...

  • Pelco TLR2096 - page 32

    32 Pelco Manual C651M (7/99) 8.1.4.2 Recommended Number Of T ape Uses V ideo tape wears during use. Use a new cassette according to T able E. (T -160 tape in lengthy time-lapse recording can stretch, resulting in poor playback or no play- back.) T able E. Recommended Number Of T ape Uses Number Of Repeat T ape Uses T -120 Cassette T -160 Cassette 2 ...

  • Pelco TLR2096 - page 33

    Pelco Manual C651M (7/99) 33 8.1.6 Synchronous Recor ding Several camera images can be mixed together through a camera switcher and then recorded separately onto several VCRs. T o do so, assign a camera to each VCR. The VCR records only the camera image assigned to it. This allows recording without gaps. If you have three VCRs, the video signals fr ...

  • Pelco TLR2096 - page 34

    34 Pelco Manual C651M (7/99) 8.2 TIMER RECORDING 8.2.1 Programming Pr ocedur e 1. Press the DISPLAY button to display the Main menu on the monitor . 2. Turn the JOG dial to select TIMER PROGRAM and turn the SHUTTLE ring to the right. The TIMER PROGRAM display will appear . 3. Turn the JOG dial to select the program number and turn the SHUTTLE ring ...

  • Pelco TLR2096 - page 35

    Pelco Manual C651M (7/99) 35 8.2.3 Avoid Mistakes When Using The Timer Refer to T able G if you get an error when pressing the TIMER REC button. • A tape is not inserted. • A tape is loaded with the erasure prevention tab removed. • Date, time, or timer recording time is not set. • A menu is being programmed. T able G. Timer Recording Troub ...

  • Pelco TLR2096 - page 36

    36 Pelco Manual C651M (7/99) 8.3.1 Alarm Recording Connection Y ou can confirm an alarm from a distance by connecting the ALM (alarm) OUT terminal to an existing alarm system panel or other external device such as a buzzer. VIDEO OUT IN IN OUT MIC AUDIO RESET REMOTE SET RST IN REC GND ALM MODE CLK CALL OUT External alarm lamp and buzzer Alarm reset ...

  • Pelco TLR2096 - page 37

    Pelco Manual C651M (7/99) 37 8.3.3 Programming For Alarm Recor ding Alarm recording speeds up recording when the VCR is recording in one of the time- lapse modes. Alarm recording provides more pictures during the alarm. Emergency recording activates alarm recording even if the VCR is off, stopped, or in timer recording/standby . Y ou should set the ...

  • Pelco TLR2096 - page 38

    38 Pelco Manual C651M (7/99) 8.3.4 Emer gency Recor ding Emergency alarm recording can start when an alarm is triggered even if the VCR is stopped or is programmed for timer recording. 1. Turn the JOG dial to select EMERGENCY REC and turn the SHUTTLE ring to the right. 2. Turn the JOG dial to select ON for emergency recording, or OFF to disable it. ...

  • Pelco TLR2096 - page 39

    Pelco Manual C651M (7/99) 39 9.0 PLA YBACK 9.1 PLA YBACK PROCEDURE REW FF JOG/ADJUST CLEAR/ ENTER/ SHUTTLE REC STOP PLAY POWER EJECT PICTURE TRACKING POSITION/ VERTICAL ADJUST REC/PLAY MODE COUNTER RESET COUNTER MEMORY/ SKIP/INDEX PAUAE SHUTTLE HOLD DISPLAY TIMER REC VIDEO SOFT SHARP COLOR B/W Figure 25. Playback Controls 1. Load a pre-recorded tap ...

  • Pelco TLR2096 - page 40

    40 Pelco Manual C651M (7/99) 9.1.2 Audio Playback The letter “L” mode (L18H) is for audio recording and playback on the linear track. T able H. Audio Playback Availability Playback Mode 2H 6H L18H 72H 96H Audio Playback A vailable A vailable Available Not Available Not A vailable Picture Quality Good Good V ibrating Less Vibrating Less Vibratin ...

  • Pelco TLR2096 - page 41

    Pelco Manual C651M (7/99) 41 9.2.2 Dir ect Shuttle Ring Y ou can also change the playback speed without entering pause mode by turning the SHUTTLE ring during playback. Releasing the SHUTTLE ring returns it to the center position and resumes normal playback. Reverse high speed search Reverse speed search Reverse fast playback (x3) Normal playback F ...

  • Pelco TLR2096 - page 42

    42 Pelco Manual C651M (7/99) 9.3 LOCA TING THE ST AR T OF ALARM RECORDINGS The VCR automatically inserts an index signal at the beginning of each alarm re- cording, so the start of each alarm can be located. 9.3.1 Index Search During fast forward or rewind, the VCR will search for alarm index signals. When it finds one, it plays back the tape and s ...

  • Pelco TLR2096 - page 43

    Pelco Manual C651M (7/99) 43 9.4 ADJUSTMENT DURING PLA YBACK 9.4.1 T racking Adjustment If noise appears in the picture during playback, fast playback, reverse playback, or forward/reverse slow playback, adjust the TRACKING buttons (+ and -) for the best picture. Press the P AUSE/SHUTTLE HOLD button while turning and holding the SHUTTLE ring to adj ...

  • Pelco TLR2096 - page 44

    44 Pelco Manual C651M (7/99) 9.4.2 Picture Quality Adjustment This control lets you adjust the playback picture so the output is sharper or softer . 9.4.3 V er tical Adjustment Do the following to reduce or eliminate picture vibration at the top and bottom. • If the vibration occurs in still, slow motion, or fast playback, press the POSI- TION/VE ...

  • Pelco TLR2096 - page 45

    Pelco Manual C651M (7/99) 45 10.0 ADDITIONAL FUNCTIONS AND FEA TURES 10.1 COUNTER 10.1.1 Counter Memory Press the COUNTER MEMORY/SKIP/INDEX button repeatedly until the “M” indi- cator appears on the fluorescent display . T urn the SHUTTLE ring to the right and the tape will rewind to the 00000 position of the counter and stop. (The rewind to 00 ...

  • Pelco TLR2096 - page 46

    46 Pelco Manual C651M (7/99) 10.4 ELAPSED TIME DISPLA Y The elapsed time of recording and playback is stored in memory . Use the elapsed time as a guide for periodic replacement of parts. 1. Press the DISPLAY button to display the Main menu. 2. Turn the JOG dial to select MAINTENANCE and turn the SHUTTLE ring to the right. The elapsed time (counted ...

  • Pelco TLR2096 - page 47

    Pelco Manual C651M (7/99) 47 11.0 TESTING 11.1 INITIAL SYSTEM TESTING Before using the newly-installed surveillance system, do the following: • Make test recordings at the time-lapse speeds you will be using. T est how the system performs with alarms. • Interrupt electrical power to check your installed power backup system (if ap- plicable). ? ...

  • Pelco TLR2096 - page 48

    48 Pelco Manual C651M (7/99) 12.0 TROUBLESHOOTING 12.1 SELF-DIAGNOSTIC FUNCTION AND WARNING DISPLA Y The VCR uses self-diagnostics to detect internal malfunctions during recording. If one occurs, the VCR indicates it on the monitor and in the VCR’ s fluorescent dis- play . T able J shows the type of malfunction corresponding to the warning displa ...

  • Pelco TLR2096 - page 49

    Pelco Manual C651M (7/99) 49 12.2 BEFORE CALLING FOR SER VICE SYMPTOM REMEDY VCR does not operate. • Is the LOCK indicator illuminated? • Is the power cord disconnected from the AC output? • Is the TIMER REC indicator illuminated? The VCR power is on but unit does not operate. • Is the LOCK indicator illuminated? • Safety devices are oper ...

  • Pelco TLR2096 - page 50

    50 Pelco Manual C651M (7/99) 13.0 SPECIFICA TIONS ELECTRICAL Power source: 100-230 VAC, 50/60 Hz. (The included power cord is used for 120 VAC, 60 Hz) Power consumption: Approximately 20 watts Rating: ALM/CALL/MODE Active: “Low” level, maximum current 50 mA (+5 VDC)/10 mA (+24 VDC) Non-active: Open, maximum voltage +24 VDC SET/RST/REC Active: W ...

  • Pelco TLR2096 - page 51

    Pelco Manual C651M (7/99) 51 MECHANICAL Heads Video: 4 rotary single crystal heads Audio/Control: 1 stationary head Erase: 1 full-track head Motors: 3 motors-drum/capstan direct drive system Video Input: 1.0 Vp-p, 75 ohms, BNC plug Audio Input: -8 dBs, 50k ohms, RCA plug Microphone Input: -67 dBs, 600 ohms, mini mic jack Video Output: 1.0 Vp-p, 75 ...

  • Pelco TLR2096 - page 52

    52 Pelco Manual C651M (7/99) 14.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved. WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective ...

Manufacturer Pelco Category VCR

Documents that we receive from a manufacturer of a Pelco TLR2096 can be divided into several groups. They are, among others:
- Pelco technical drawings
- TLR2096 manuals
- Pelco product data sheets
- information booklets
- or energy labels Pelco TLR2096
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pelco TLR2096.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pelco TLR2096, service manual, brief instructions and user manuals Pelco TLR2096. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pelco TLR2096.

Similar manuals

A complete manual for the device Pelco TLR2096, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pelco TLR2096 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pelco TLR2096.

A complete Pelco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pelco TLR2096 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pelco TLR2096, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pelco TLR2096, that we can find in the current document
3. Tips how to use the basic functions of the device Pelco TLR2096 - which should help us in our first steps of using Pelco TLR2096
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pelco TLR2096
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pelco TLR2096 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pelco TLR2096?

Use the form below

If you did not solve your problem by using a manual Pelco TLR2096, ask a question using the form below. If a user had a similar problem with Pelco TLR2096 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)