English dropdown-ico

Manual Nilfisk-ALTO 03KLU

15 pages 0.31 mb
Download

Go to site of 15

Summary
  • Nilfisk-ALTO 03KLU - page 1

    03KL U Instruktionsbog ...................................... 1 - 8 User Manual ........................................... 9 - 16 Betriebsanleitung ................................... 17 - 24 ...

  • Nilfisk-ALTO 03KLU - page 2

    Printed in Denmark Copyright © 2008/2009 Nilfi sk-AL T O ...

  • Nilfisk-ALTO 03KLU - page 3

    9 Congratulations Congratulations on y our choice of new cold water cleaner . W e are sure that it will live up to your expectations . T o ensure that you obtain the best possib le results from your ne w cleaner we ask you to read this instruction manual carefully before use . Y ours f aithfully Nilfi sk-AL T O , Division of Nilfi sk-Advance A/S ...

  • Nilfisk-ALTO 03KLU - page 4

    10 2.0 Ke y Photo EN 2603KLU 1. Pump with bracket 2. Manometer 3. Chassis 4. Exhaust fi lter 5. Lubr icating device 6. Manometer 7. Regulating valv e 8. Filter 9. Air motor 10. Belt tightener 11. W ater inlet 12. Belt guard 13. V -belt 14. Sludge container 15. W ater outlet ...

  • Nilfisk-ALTO 03KLU - page 5

    11 3.0 Connections EN 3.1 W ater connection The water input is connected at the bac k of the machine. The machine can be connected directly to the mains water supply , or it can work as a self- priming unit*). For direct w ater connection the inlet hose must be at least 6 m long, and the water temperature m ust not exceed 85°C . Please note that c ...

  • Nilfisk-ALTO 03KLU - page 6

    12 5.0 Operation EN 5.1 Starting-up procedure 1. Check the oil le vel in the oil glass . The lev el should be maintained between the MIN. and MAX. mar ks. This applies also for the oil le vel in the oil-mist lubricator (pos. 5). 2. Run water through the inlet hose bef ore connec- ting, in order to remov e possible impurities in the hose. Connect th ...

  • Nilfisk-ALTO 03KLU - page 7

    13 7.0 Maintenance EN 7.1 Changing of oil The oil should be changed after each 1000 hours’ use. Remov e the cover of the oil glass . Unscrew the drain plug. Allow the oil to run out and clean the drain plug of impurities. Screw in the plug and refi ll the pump with fresh oil through the oil glass. Holds approx. 1 l. F rom Nilfi sk-AL T O the pu ...

  • Nilfisk-ALTO 03KLU - page 8

    14 9.0 Operating and maintenance instructions EN GAST Air motor T ype AM 8 9.1 Construction Y our air motor is a precision b uilt rotar y type motor . The vanes tak e u p their own wear and will last 5,000-15,000 hours depending upon speed, met- hod of oiling, operating pressure, and the precau- tions taken in maintaining the motor . The type of sh ...

  • Nilfisk-ALTO 03KLU - page 9

    15 10.0 Model designation EN The Nilfi sk-AL T O 03K-ser ies of cold water cleaners is produced in sev eral models. The model des ig - na tion is pr inted on the model plate, e.g. Nilfi sk- AL T O 2603KLU. This plate pro vides the follo wing details. 1. Model designation 2. Nilfi sk-AL T O order no. 3. Nozzle 4. Pump pressure 5. Max. pressure 6. ...

  • Nilfisk-ALTO 03KLU - page 10

    16 12.0 Dia gnosis of faults and repair EN Fault Cause Repair The motor fails to start Oil supply not connected Connect the oil hose Oil supply closed Open the valv e No oil pressure Star t the hydr aulic pump The pump is frozen Let the pump thaw W orking pressure too high Nozzle par tly bloc ked Clean the nozzle W orking pressure too low V alve f ...

  • Nilfisk-ALTO 03KLU - page 11

    25 COPY M ...

  • Nilfisk-ALTO 03KLU - page 12

    26 COPY ...

  • Nilfisk-ALTO 03KLU - page 13

    27 COPY ...

  • Nilfisk-ALTO 03KLU - page 14

    ...

  • Nilfisk-ALTO 03KLU - page 15

    616 96 00 d (12.2008) http://www .nil fi sk-advance.com FINLAND Nilfi sk-Advance Oy Ab Piispantilankuja 4 02240 Espoo T el.: +358 207 890 600 F ax: +358 207 890 601 E-mail: asiakaspalvelu.fi @nilfi sk.com FRANCE Nilfi sk-AL TO AL TO F rance SAS Aéroparc 1 19 rue Icare 67960 Entzheim T el.: (+33) 3 88 28 84 00 F ax: (+33) 3 88 30 05 00 E-mail: ...

Manufacturer Nilfisk-ALTO Category Pressure Washer

Documents that we receive from a manufacturer of a Nilfisk-ALTO 03KLU can be divided into several groups. They are, among others:
- Nilfisk-ALTO technical drawings
- 03KLU manuals
- Nilfisk-ALTO product data sheets
- information booklets
- or energy labels Nilfisk-ALTO 03KLU
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nilfisk-ALTO 03KLU.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nilfisk-ALTO 03KLU, service manual, brief instructions and user manuals Nilfisk-ALTO 03KLU. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nilfisk-ALTO 03KLU.

Similar manuals

A complete manual for the device Nilfisk-ALTO 03KLU, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nilfisk-ALTO 03KLU by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nilfisk-ALTO 03KLU.

A complete Nilfisk-ALTO manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nilfisk-ALTO 03KLU - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nilfisk-ALTO 03KLU, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nilfisk-ALTO 03KLU, that we can find in the current document
3. Tips how to use the basic functions of the device Nilfisk-ALTO 03KLU - which should help us in our first steps of using Nilfisk-ALTO 03KLU
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nilfisk-ALTO 03KLU
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nilfisk-ALTO 03KLU in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nilfisk-ALTO 03KLU?

Use the form below

If you did not solve your problem by using a manual Nilfisk-ALTO 03KLU, ask a question using the form below. If a user had a similar problem with Nilfisk-ALTO 03KLU it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)