Manual Harbor Freight Tools 05154

20 pages 0.85 mb
Download

Go to site of 20

Summary
  • Harbor Freight Tools 05154 - page 1

    SANDER - 4” BEL T & 6” DISC Model 05154 ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com Cop yr ight 2004 by Harbor F reight T ools ® . All rights reser ved. No por tion of this manual or any artwork contained herein may be reproduced in any shape or ...

  • Harbor Freight Tools 05154 - page 2

    PR ODUCT SPECIFICA TIONS GENERAL SAFETY RULES W ARNING! READ AND UNDERST AND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury . SA VE THESE INSTRUCTIONS W ORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate ...

  • Harbor Freight Tools 05154 - page 3

    3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with a ...

  • Harbor Freight Tools 05154 - page 4

    11. Dress properl y . Do not wear loose clothing or je welr y . Contain long hair . K eep your hair , clothing, and gloves a way fr om moving parts. Loose clothes, je welr y , or long hair can be caught in moving par ts. 12. A v oid accidental star ting. Be sure the P ower Switch is off bef ore plugging in. Carrying power tools with your finger on ...

  • Harbor Freight Tools 05154 - page 5

    22. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that ma y affect the tool’ s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. 23. Use only accessories that are recommended by the manufacturer for your model. Accessor ies that may b ...

  • Harbor Freight Tools 05154 - page 6

    3. Y our tool must be plugged into an appropriate outlet, proper ly installed and grounded in accordance with all codes and ordinances . The plug and outlet should look like those in the f ollowing illustration. (See Figure A.) FIGURE A SKU 05154 P A GE 6 DOUBLE INSULA TED T OOLS: T OOLS WITH TW O PR ONG PLUGS 1. T ools mar ked “Double Insulated? ...

  • Harbor Freight Tools 05154 - page 7

    SKU 05154 P AGE 7 serious drop in voltage, resulting in loss of power and possible tool damage. (See Figure C.) 3. The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Figure C.) 4. When using more than one extension cord to make up the tot ...

  • Harbor Freight Tools 05154 - page 8

    SKU 05154 P A GE 8 SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. V olts Alternating Current Amperes No Load Revolutions per Minute (RPM) no xxxx/min. A V ~ FIGURE D SPECIFIC SAFETY RULES 1. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. ...

  • Harbor Freight Tools 05154 - page 9

    9. Store idle equipment. When not in use, tools and equipment should be stored in a dr y location to inhibit rust. Alwa ys lock up tools and equipment, and k eep out of reach of children. 10. Do not use this product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impair ...

  • Harbor Freight Tools 05154 - page 10

    21. Allow the Sanding Disc (11) and Sanding Belt (45) to spin up to full speed before f eeding a workpiece into them. When tur ning off the Sander , allow the Sanding Disc and Sanding Belt to slow down and stop on their own. Do not press against the Disc or Belt to stop them. 22. Feed the workpiece into the Sanding Disc (12) and Sanding Belt (45) g ...

  • Harbor Freight Tools 05154 - page 11

    SKU 05154 P AGE 11 27. W ARNING! The war nings, precautions, and instructions discussed in this manual cannot cov er all possible conditions and situations that ma y occur . The operator must understand that common sense and caution are factors which cannot be built into this product, b ut must be supplied by the operator . ASSEMBL Y AND OPERA TING ...

  • Harbor Freight Tools 05154 - page 12

    T o Install A Sanding Disc: 1. W ARNING! Prior to performing an y assembly pr ocedures, make sure the Power Switch (30) is in its “OFF” position and the Power Cord (29) of the Sander is unplugged from its electrical outlet. 2. Check to mak e sure the Disc (11) is free of dir t, oil, and other debr is . (See Figure G.) 3. Remove the paper backin ...

  • Harbor Freight Tools 05154 - page 13

    SKU 05154 P AGE 13 FIGURE H LOCK SCREW (15) WORK T ABLE (13) ANGLE PLA TE (14) T o Adjust The Angle Of The Miter Guide: 1. The angle of the Miter Guide (21) may be adjusted to the right 0 to 45 degrees and to the left 0 to 45 degrees. (See Figure I.) 2. T o adjust the angle of the Miter Guide (21), slightly loosen the Miter Guide Knob (22). (See Fi ...

  • Harbor Freight Tools 05154 - page 14

    SKU 05154 P AGE 14 T o Adjust For V er tical Sanding: 1. Slightly loosen the Lock Screw (20). (See Figure J.) 2. Raise the Belt F rame ver tically to the desired position. Then, retighten the Lock Screw (20) to lock the Belt Frame in place. (See Figure J.) LOCK SCREW (20) BEL T FRAME (3) FIGURE J T o P erf orm Horizontal Sanding With The Sanding Be ...

  • Harbor Freight Tools 05154 - page 15

    6. Once the sanding procedure is completed, remove the workpiece from the Sand- ing Belt (45). T ur n the P ow er Switch (30) to its “OFF” position, and unplug the machine from its electrical outlet. (See Figure K.) WORKPIECE POWER SWITCH (30) WORK SUPPORT (33) T o P erf orm V er tical Sanding With The Sanding Belt: 1. CAUTION! Before each use, ...

  • Harbor Freight Tools 05154 - page 16

    SKU 05154 P A GE 16 8. Once the sanding procedure is completed, remove the workpiece from the Sand- ing Belt (45). T ur n the P ow er Switch (30) to its “OFF” position, and unplug the machine from its electrical outlet. (See Figure L.) WORKPIECE WORK SUPPORT (33) POWER SWITCH (30) FIGURE L T o P erf orm Horizontal Sanding With The Sanding Disc: ...

  • Harbor Freight Tools 05154 - page 17

    SKU 05154 P A GE 17 7. Hold the workpiece firmly with one hand and the Miter Guide (21) with the other hand. Gradually push the workpiece into the Sanding Disc (12), allowing the Sanding Disc to cut without being forced. (See Figure M.) FIGURE M MITER GUIDE (21) 8. Once the sanding procedure is completed, remove the workpiece from the Sand- ing Dis ...

  • Harbor Freight Tools 05154 - page 18

    5. When storing, make sure to store the Sander in a safe, clean, and dry location. PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF A CTURER AND/OR DISTRIBUT OR HAS PRO VIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE T OOL ONL Y . NEITHER THE MANUF A CTURER OR DISTRIBUT OR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY KIND ...

  • Harbor Freight Tools 05154 - page 19

    SKU 05154 P AGE 19 P ARTS LIST NO TE: Some par ts are listed and sho wn f or illustration purposes only , and are not available individually as replacement parts. Part # Description Qty. Part # Description Qt y . 1 Base 1 33 Work Support 1 2 Pivot Bracket 1 34 Pull Rod 1 3 Belt Frame 1 35 Push Back Spring 1 4 Main Shaft 1 36 Handle 1 5 Drive Roller ...

  • Harbor Freight Tools 05154 - page 20

    SKU 05154 P A GE 20 ASSEMBL Y DIA GRAM & WIRING SCHEMA TIC NO TE: Some parts are listed and sho wn for illustration purposes onl y , and are not available individually as replacement parts. MO T OR RED RED BLACK GREEN SWITCH BLACK C O N N E C T O R POWER CORD ...

Manufacturer Harbor Freight Tools Category Sander

Documents that we receive from a manufacturer of a Harbor Freight Tools 05154 can be divided into several groups. They are, among others:
- Harbor Freight Tools technical drawings
- 05154 manuals
- Harbor Freight Tools product data sheets
- information booklets
- or energy labels Harbor Freight Tools 05154
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harbor Freight Tools 05154.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harbor Freight Tools 05154, service manual, brief instructions and user manuals Harbor Freight Tools 05154. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harbor Freight Tools 05154.

A complete manual for the device Harbor Freight Tools 05154, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harbor Freight Tools 05154 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harbor Freight Tools 05154.

A complete Harbor Freight Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harbor Freight Tools 05154 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harbor Freight Tools 05154, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harbor Freight Tools 05154, that we can find in the current document
3. Tips how to use the basic functions of the device Harbor Freight Tools 05154 - which should help us in our first steps of using Harbor Freight Tools 05154
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harbor Freight Tools 05154
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harbor Freight Tools 05154 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harbor Freight Tools 05154?

Use the form below

If you did not solve your problem by using a manual Harbor Freight Tools 05154, ask a question using the form below. If a user had a similar problem with Harbor Freight Tools 05154 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)