English dropdown-ico

Manual Casio DT-X11 Series

51 pages 0.69 mb
Download

Go to site of 51

Summary
  • Casio DT-X11 Series - page 1

    DT-X11 Series Hardware Manual (Version 1.01) CASIO Computer Co., Ltd. Copyright ©2006. All rights reserved. August 2006 ...

  • Casio DT-X11 Series - page 2

    2 Table of Contents Editorial Record 4 Preface 5 Chapter 1. Overview of the Products 6 1.1. Features 6 1.2. Available Models 8 1.2.1. Options and Interfaces 9 1.3. General Guide 10 1.3.1. DT-X11 10 1.3.2. DT-167CHGE Car Mounted Batter y Charger 12 1.3.3. DT-160IOE Bridge Satellite Cradle 13 1.3.4. DT-169CHGE Cradle-t ype Battery Charger 15 1.3.5. D ...

  • Casio DT-X11 Series - page 3

    3 5.3.4. HA-A20BAT/DT-5025L BAT 42 5.3.5. DT-894CFU CF Card Extension Unit 42 5.4. Reliability 43 5.4.1. DT-X11 43 5.4.2. DT-160IOE/DT-169CHGE 43 5.4.3. DT-5022CHG 44 5.5. Compliance 45 5.5.1. DT-X11 45 5.5.2. DT-160IOE/DT-169CHGE 45 Chapter 6. Cable Specifications 46 6.1. For Chain Connection and Short Length 46 6.2. For Chain Connection and Long ...

  • Casio DT-X11 Series - page 4

    4 Editorial Record Manual Version no. Date edited Page Content 0.90 February 2006 Tentative version 1.00 March 2006 Original version 8 The content in Table 1 .2 of Chapter 1.2 is corrected . 1.01 August 26 The content in Table 2 .9 of Chapter 2.7 is corrected . ...

  • Casio DT-X11 Series - page 5

    5 Preface This reference manual descr ibes about the CASIO DT-X11 series handhel d terminals with C-MOS imager or Laser Scanner integrated. A new generation of handheld terminal h as been developed. CASIO introduces the re volutionary DT-X11 series of hand held terminal with built-in Intel® PXA255 A pplication Processor, C-MOS imager or 1D bar c o ...

  • Casio DT-X11 Series - page 6

    6 1. Overview of the Products 1.1 Features Incorporates .NET technology • Uses WindowsCE 5.0 operating system. • Makes effective use of .N ET resources developed by other corporations. • Employm ent of eMbedded OS makes it possible to buil d a flexible Window sCE system. Enhanced communicating functions • Covers GPRS/WLAN, etc. by using var ...

  • Casio DT-X11 Series - page 7

    7 Aiming to a full compliance with the “Restriction of the use of certain Hazardous Substances in electronic equipment (RoHS)” set mandatory on July 1 2006 The following prod ucts have been ass embled with devic es, components and parts manufactured using Lead (Pb) free solder. - DT-X11M10E - DT-X11M10RC - DT-X11M30E - DT-X11M30U - DT-X11M30RC ...

  • Casio DT-X11 Series - page 8

    8 1.2 Available Models Table 1.1 Li st of models Wireless Com municati on Memory Model Scan Engine Bluetooth IEE802.11b PC Card slot RAM FROM DT-X11M10E Las er Scanner Yes Yes Yes 64MB 128MB DT-X11M10RC Las er Scanner Yes No No 64MB 128MB DT-X11M30E C-MOS Imager Ye s Yes Yes 64MB 128MB DT-X11M30U C-MOS Imager Ye s Yes Yes 64MB 128MB DT-X11M30RC C-M ...

  • Casio DT-X11 Series - page 9

    9 1.2.1 Options and Interfaces Fig. 1.1 USB Por t ( Ver 1 . 1 Functio n ) PC IrDA Por t ( IrDA 1 . 1) Bridge Satellite Cradle DT - 160 IOE Power Supply Terminals ( Built - in Charge Circuit ) Car Mounted Battery Charge r DT - 167 CHGE Dual Battery Charge r DT - 5022 CHG PC USB RS -232 C DoPA ｶｰﾄ ﾞ GPRS ｶｰﾄ ﾞ Battery Pack HA - A 20 B ...

  • Casio DT-X11 Series - page 10

    10 1.3 General Guide 1.3.1 DT-X11 Left Front Right Back 22 23 24 25 21 18 19 1 2 4 3 5 7 9 6 8 10 11 12 13 14 18 17 16 15 20 Fig. 1.2 Table 1.4 Nam es of parts No. Name Description Indicates th e result of a ba r code reading or oth er read operation . 1 Indicator 1 Red Green : Read e rror : Read su ccessful This lamp indica tes the charge status o ...

  • Casio DT-X11 Series - page 11

    11 These keys can be assigned any func tion other than barcode reading. The following are the initial defa ult settings. 10 Function Keys F1 F2 F3 F4 : Deletes one character to th e left. : Inputs a hyphen (-). : Inputs a period (.). : Toggles to switch b etween numbers and alphabets. 11 IR Port This port is used for IR communication with anothe r ...

  • Casio DT-X11 Series - page 12

    12 1.3.2 DT-167CHGE Car Mounted Battery Charger Views Power Indicator Lamp Power Contacts Remove button Car plug code jack Power Switch Fig. 1.3 ...

  • Casio DT-X11 Series - page 13

    13 1.3.3 DT-160IOE Bridge Satellite Cradle The following ext ernal views show the DT-160IO E Bridge Satellite Cradl e. Refer to Table 1.5 for each referenced part on the DT-160IOE. Views 1 2 4 3 5 7 6 8 10 11 9 12 13 14 Back Top Front Right Bottom Fig 1.1 Table 1.5 Nam es of parts No. Name Description 1 USB Port This p ort accepts connection of a U ...

  • Casio DT-X11 Series - page 14

    14 No. Name Description 5 Wall Mount Unit Fastening Plate The holes in this plate accept screws that sec ure the wall mount unit in place. 6 Terminal Detect Switch This switch det ects when the Handh eld Terminal is not se ated correctly on the Bridge Satellite Cradle. 7 IR Port This port tra nsfers data to th e Handheld Term inal via IR port. 8 Po ...

  • Casio DT-X11 Series - page 15

    15 1.3.4 DT-169CHGE Cradle-type Battery Charger The following external views show the DT-169CHGE (Cradle-type Battery Ch arger). Refer to Table 1.6 for each referenced part on the DT-169CH GE. Views Back Top Front Right Bottom 1 2 3 4 6 7 5 Fig 1.2 Table 1.6 Nam es of parts No. Name Description 1 AC Adaptor Jack Connect s the AC ad aptor here. 2 Wa ...

  • Casio DT-X11 Series - page 16

    16 1.3.5 DT-5022CHG Dual Battery Charger The following ext ernal views show the DT-502 2CHG (Dual Battery Charger). Ref er to Table 1.7 for each referenced part on the DT-5022CHG. Views Back Top Front 3 4 1 2 1 3 3 4 4 4 Fig 1.3 Table 1.7 Nam es of parts No. Name Description This lamp indicate s the charge st atus of the battery pack(s). 1 Charge I ...

  • Casio DT-X11 Series - page 17

    17 2. Hardware Specifications 2.1 DT-X11 Table 2.1 Item Specifi cation Remark CPU, Mem ory CPU Intel ® PXA255 Application Processor Operating clock; max 400 MHz RAM 64 MB FROM 128 MB (user area; approx. 1 15 MB) FlashFX built in. OS Microsoft ® W indows ® CE 5.0 operating system C-MOS Imager (DT -X11M30E, DT -X11M30U, and DT -X1 1M30RC) Method C ...

  • Casio DT-X11 Series - page 18

    18 Laser Scanner (DT -X1 1M10E and DT -X1 1 M10RC) Method Semi-conductor laser light Laser emitting angle S traight W ave length 650±10 nm Optical output <1 mW No. of scannings 100±20 times per second Resolution 0.127 mm (minimum) PCS 0.45 (minimum ) Print contrast signal Readable distance Approximately 40 to 300 mm Max. 40 mm When the dis tan ...

  • Casio DT-X11 Series - page 19

    19 Bluetooth ® Standard Bluetooth ® Specification V er .1.2 Comm. range Approx. 3 m Depending on the surrounding conditions Output power Maximum. 3dBm ( Power Class 2) Serial in terface Sta ndard USB Slav e Mini B 5 Pi n. Baud rate Full speed (12 Mbps) Audio Earphone jack φ 2.5mm 3-pole Supports headset. PC Card (applicable to DT -X11M10E, DT -X ...

  • Casio DT-X11 Series - page 20

    20 2.2 DT-160IOE Bridge Satellite Cradle Table 2.2 Item Specif ication Remark Standard IrDA V er . 1.1 co mpatible Comm. method Half duplex Synchronization Start/stop method IrDA Comm. sp eed 4 Mbps (m aximum) Standard USB V er .1.1 compatible Baud rate 12 Mbps (maximum) USB Connector 12 43 USB connector B type 1 VBus 2 – Da ta (D -) 3 + D ata (D ...

  • Casio DT-X11 Series - page 21

    21 Input voltage DC 12V ±5% Consum ption current Approx. 1,600 mA When supplying power or transmitting data. Plug EIAJ RC-5320A type 4 Center; Plus Input from AC adaptor AC adaptor AD-S42120A E Output voltage DC 5V ±10% Output current 2,500mA(maximum) Charge m ethod Constan t voltage W ith cu rb function on current Approx. 2. 5 hours For HA-A20BA ...

  • Casio DT-X11 Series - page 22

    22 2.3 DT-167CHGE Car Mounted Battery Charger Table 2.4 Item Specif ication Remark No. of LEDs 1 No. of display colors 2 In red and green Display content Power status (“POWER”) Indicates the status of terminal be ing mounte d on the char ger . Display Status LED OFF Flashing in green Flashing in red : Power is OFF . : Power is ON and the termin ...

  • Casio DT-X11 Series - page 23

    23 2.4 DT-169CHGE Cradle-type Battery Charger Table 2.6 Item Specifi cation Remark No. of LEDs 1 No. of di splay col ors 2 In re d and gree n Display Status LED Display c ontent Powe r status (“ POWER”) Input Detection switch for DT -X1 1 terminal Push switch Input voltage DC 12V ± 5% Consumption current Approx. 1,400 mA While supplying power ...

  • Casio DT-X11 Series - page 24

    24 2.5 DIP Switch Setting for DT-160IOE The DIP switch is located on the rear side of Br idge Sa tellite Cradle. Change th e ON/OFF settings according to y our required system configuration. T h e new settings do not go i nto effect until the power switch is tur ned off and then back on. Fig. 2.1 Note: Other DIP switch sett ings are used for testin ...

  • Casio DT-X11 Series - page 25

    25 2.6 Status Indication with LEDs Various operational statuses on the DT-16 0IOE can be displayed usin g the LEDs. The followi ng table describes LED modes and their meanings. Table 2.8 Item Specif ication Remark LED DT-X11 terminal is not mounted LED ON in red DT-X11 terminal is mounted LED ON in green Power status indicator (“POWER”) Power O ...

  • Casio DT-X11 Series - page 26

    26 2.7 DT-5022CHG Dual Battery Charger Basic Block Table 2.9 Item Specif ication Remark Basic function Rechargeable battery pack HA-A20BAT B at te r y p ac k DT-5025LBAT Large-cap acity battery pack Dedicated batteries only. AC adaptor AD-S45150AU Inpu t 100 to 230VAC (W/US po wer cord) AD-S45150AE Input 100 to 230 VAC (W/European power cord) Dedic ...

  • Casio DT-X11 Series - page 27

    27 Charge output terminal CH1 PIN1: + 4.22V±30mV PIN2: - GND Charge output terminal CH2 PIN1: + 4.22V±30mV PIN2: - GND Input termin al DC jack Rated DC 16V, inpu t voltage DC 8.0 to 20.0 V Battery Charge Block Table 2.12 Item Specif ication Remark Char ge control Output voltage DC 4.22V±30mV Charge current (standard mode) DC 1,600m A±10% Charge ...

  • Casio DT-X11 Series - page 28

    28 Table 2.13 Weight/Dimensions Item Specif ication Remark Weight Approx. 154 g Dimensions 100 (L) x 110 (W) x 49 (H) mm ...

  • Casio DT-X11 Series - page 29

    29 2.8 HA-A20BAT/DT-5025LBAT Table 2.14 Specifica tion Item HA-A20BAT DT-5025LBAT Remark Rated capacity 1,700 mAh 3,400 mAh 0.2C discharge Rated voltage 3.7 V 3.7 V 0.2C discharge Discharge end voltage 2.75V 2.75V Standard charge cu rrent 1.0 CA (=1.55 A) 0 to 40 ºC 1.6A 0 to 50 ºC Charge voltage 4 .2±0.05V 4.2±0.05V Charge hour (standar d mode ...

  • Casio DT-X11 Series - page 30

    30 2.9 DT-894CFU CF Card Extension Unit Fig. 2.2 Table 2.15 Dimensions/Weig ht Item Specif ication Remark Approx. 70 (W) x 87 (D) x 13 (D) mm With standard size cover Dimensions Approx. 85 (W) x 78 (D) x 13 (D ) mm With lar ge size cover Approx. 40 g With standard size cover Weight Approx. 45 g With large size cover ...

  • Casio DT-X11 Series - page 31

    31 3. Interfaces 3.1 DT-X11 CF Extension Slot Table 3.1 Specifica tion Remark Interface CFA Rev.1.3 compatib le CF Type I/II 3.3V only Power voltage 3.3V±5% Supply current 300 mA (maximum) Pin Assignment Table 3.2 Memory Mode I/O Mode Memory Mode I/O Mode Name I/O Name I/O Pin no . Pin no. Name I/O Name I/O GND P GND P 1 26 -CD1 I -CD1 I D03 I/O D ...

  • Casio DT-X11 Series - page 32

    32 Table 3.3 IrDA interface Item Specif ication Remark Communication speed, modulation Standard IrDA V er . 1.1 compatible FIR 4 Mbps 4 -value PPM modulati on MIR 1.152 M, 576 Kbps NRZ modulation SIR 2.4 K to 1 15.2 Kbps NRZ modulation Emission unit Peak wave length 880 to 900 nm Emission strength T ype 75 mW/sr Emission angle ±15° Reception unit ...

  • Casio DT-X11 Series - page 33

    33 Memory backup battery Battery t ype Button-shape Lithium rechargeable battery (CR-2032) Rated voltage 3.0 V Batte ry low warning Low main batte ry voltage VDET1: 3.4 V W arning di splay , but still operable . Forcible OFF VDET2: 3.0 V For cible OFF . Low sub-battery voltage VDETS: 2. 3 V Data cann ot be retained. ...

  • Casio DT-X11 Series - page 34

    34 4. Product Identification and Reference Numbers On the back of the DT-X1 1 and its options , there is a bar code a nd numbers printed on label as shown in Fig 4.1 . This bar code is represente d by 15 digits of Co de128 symbology and by alphanumeric chara cters beneath the bar code . The numbers from 1 to 9 i n the figure represent identificatio ...

  • Casio DT-X11 Series - page 35

    35 5. Quality References This chapter will describe about references of the DT-X11 and i ts dedicated options concerned wi th environmental perform ance, compliance, mechanical and electric durability, etc. 5.1 Environmental Performances 5.1.1 DT-X11 Table 5.1 Item Specification Condition T em perature Operation -20 ºC to 50 ºC 0 to 40 ºC for ch ...

  • Casio DT-X11 Series - page 36

    36 5.1.3 DT-167CHGE Table 5.3 Item Specification Condition T em perature Operation 0 ºC to 40 ºC Stora ge -40 ºC to 85 ºC Humidity Operation 30 % to 80 %RH Storage 30 % to 95 %RH No condensation Storage in carton box T emper ature -10 ºC to 50 ºC Humidity 30 % to 90 %RH No conden sation 5.1.4 DT-5022CHG Table 5.4 Item Specification Condition ...

  • Casio DT-X11 Series - page 37

    37 5.1.5 HA-A20BAT/DT-5025LBAT Table 5.5 Item Specification Condition T em perature Operation 0 ºC to 40 ºC Non-operation -5 ºC to 50 ºC When battery is not char ged. Stora ge -10 ºC to 55 ºC Humidity Operation 20 % to 90 %RH Storage 20 % to 90 %RH No condensation Storage in carton box T emper ature -10 ºC to 55 ºC Humidity 90 %RH o r less ...

  • Casio DT-X11 Series - page 38

    38 5.1.6 DT-894CFU Table 5.6 Item Specification Condition T em perature Operation -20 ºC to 50 ºC Non-operat ion -20 ºC to 70 ºC Humidity Operation 10 % to 80 %RH St orage 5 % to 90 %RH No condensation Storage in carton box T emper ature -10 ºC to 55 ºC Humidity 90 %RH or less No cond ensation Dust and water-splash proof IP64 level (complia n ...

  • Casio DT-X11 Series - page 39

    39 5.2 Electrical Performances 5.2.1 DT-X11 Table 5.7 Item Specif ication Remark Power consumption DC2.5A/3.7 to 5.0 V Anti-static strength Malfunction ± 6 KV Destruction ± 12 KV 150 pF , 330 ohm 5.2.2 DT-160IOE/DT-169CHGE Table 5.8 Item Specif ication Remark Approx. 0.1 A When DT -X11 is not mounted on. Current consum ption Approx. 1.6 A While s ...

  • Casio DT-X11 Series - page 40

    40 5.2.4 DT-5022CHG Table 5.10 Item Specif ication Remark Anti-static strength Malfunction ± 5 KV Destruction ± 10 KV - ESD method: 250 pF , 100 ohm - Probe: Finger type - Polar ity: ± 5.2.5 HA-A20BAT/DT-5025LBAT Table 5.11 Item Specif ication Remark Anti-static strength Malfunction ± 5 KV Destruction ± 10 KV - ESD method: 250 pF , 100 ohm - P ...

  • Casio DT-X11 Series - page 41

    41 5.3 Mechanical Performances 5.3.1 DT-X11 Table 5.13 Item Specification Condition Resistance to drop impact(height ) In bare cond ition 120 cm Onto concrete, three times on eac h of the 6 sides and 4 co rners. In individual carton box 70 cm or less In master carton box 5 0 c m o r l e s s Onto concrete, one time on each of the 6 side s, 1 corner, ...

  • Casio DT-X11 Series - page 42

    42 5.3.4 HA-A20BAT/DT-5025LBAT Table 5.16 Item Specification Condition Resistanc e to vibra tion 1 G - 10 to 55 Hz, In X,Y , and Z directio ns - Reciprocally for 15 minutes - While the power is being turned off. Resistance to vibratio n (in carton box) 2 G - 10 to 55 Hz, In X,Y , and Z directio ns - Reciprocally for 15 minutes Resistance to impac t ...

  • Casio DT-X11 Series - page 43

    43 5.4 Reliability 5.4.1 DT-X11 Table 5.18 Item Specification Remark/Condition Backlight 5,000 hours At half-life period Scanner module 10,000 hours C-MOS Imager 300 ,000 hours USB co nnector 5,000 times PC Card slot co ver 100 times T rigger keys 1,000,000 ti mes Each trigger key Other keys 500,000 times Mounting/removing of DT -X1 1 to/from the C ...

  • Casio DT-X11 Series - page 44

    44 5.4.3 DT-5022CHG Table 5.20 Item Specif ication Remark MTBF 210,000 hours or more MIL-HDBK217F Protection from short Internal ci rcuit is protecte d fr om a short between the ch arge term inals ...

  • Casio DT-X11 Series - page 45

    45 5.5 Compliance 5.5.1 DT-X11 Table 5.21 Category Standard DT -X1 1M30 U DT -X1 1M10E DT -X1 1M30E DT -X1 1M10RC DT -X1 1M30RC Remarks UL1950 3 rd Edition Y es No No US EN60950-1 No Y es Y e s EU Safety GB4943 No Y es Y e s CCC FCC part 15 C, OET -65(SAR) Y e s No No US EN300328-2 V1.21 No Y e s Y es EU WLAN T ype Approval Bluetooth T ype Approval ...

  • Casio DT-X11 Series - page 46

    46 6. Cable Specifications 6.1 For Chain Connection and Short Length Length; 1 meter or less Fig. 6.1 Table 6.1 Specifications of the cable Cable Conductor 20/0.1A Insulator Semi-hard mat eri al P. V.C. Core wire Finish of exter nal shape 20/0.1A Insulator P.V.C. Sheath Finish of exter nal shape φ 4.3±0.1m m Conductance resistance 0.12 Ω /m or ...

  • Casio DT-X11 Series - page 47

    47 6.2 For Chain Connection and Long Length Length; 1 meter or longer Fig. 6.3 Pin layout diagram of cable for chain conn ection and long dista nce (pin-to-pin straight/ twist-pair connection) Wiring Fig. 6.4 Pin no. Signal 1 ORS+ 2 ORS- 3 OSD+ 4 OSD- 5 IRD+ 6 IRD Pin no. Signal 1 IRS+ 2 IRS- 3 ISD+ 4 ISD- 5 ORD+ 6 ORD- Max. 1 ,000m 1 2 3 4 5 6 1 2 ...

  • Casio DT-X11 Series - page 48

    48 7. Precautions 7.1 Handling Precautions for short-term storage (1 to 2 days period) • If the DT-X11 is to be st ored over holidays (inclu ding Saturday and Sunday), re place the HA-A20BAT (or DT-502 5LBAT) battery pack with full y charged one before it is stored. This will conserve the m emory backup ba ttery and ensure retent ion of data on t ...

  • Casio DT-X11 Series - page 49

    49 7.2 Safety 7.2.1 Battery Pack/Memory Backup Battery Battery Pack • Never disassemble or retrof it the battery pack . The batte ry pack has safety mechanis m and protection m eans incorporated to avoid h azards. Should they b e damaged, the batt ery pack could becom e hot, generate sm oke, explode, or ignite. • Never contact the “ +” and ...

  • Casio DT-X11 Series - page 50

    50 • The battery pack has a specific polarity . Do not force it i nto the DT-X11 when installing. Check the pol arity. If the battery pack is c onnected backwards, it can be incorrectly charged and have an abnorm al chemical reaction i nduced, causing it to become hot, smoke, explode, or ignite. • If the internal electrolyte of the battery pack ...

  • Casio DT-X11 Series - page 51

    51 7.2.2 General • Avoid exposing it to water and foreign matter. Sho uld foreign matter (m etal chips, water, liquid chemicals) enter inside the DT-X11, immediately tur n off it, remove the batteries , unplug the AC adaptor, then contact a CASIO distributor. • Be aware of abnorm al conditions. If the DT-X11 is continuous ly used in an ab norma ...

Manufacturer Casio Category Computer Hardware

Documents that we receive from a manufacturer of a Casio DT-X11 Series can be divided into several groups. They are, among others:
- Casio technical drawings
- DT-X11 Series manuals
- Casio product data sheets
- information booklets
- or energy labels Casio DT-X11 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Casio DT-X11 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Casio DT-X11 Series, service manual, brief instructions and user manuals Casio DT-X11 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Casio DT-X11 Series.

Similar manuals

A complete manual for the device Casio DT-X11 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Casio DT-X11 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Casio DT-X11 Series.

A complete Casio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Casio DT-X11 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Casio DT-X11 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Casio DT-X11 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Casio DT-X11 Series - which should help us in our first steps of using Casio DT-X11 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Casio DT-X11 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Casio DT-X11 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Casio DT-X11 Series?

Use the form below

If you did not solve your problem by using a manual Casio DT-X11 Series, ask a question using the form below. If a user had a similar problem with Casio DT-X11 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)