English dropdown-ico

Manual Casio QT-6600

240 pages 0.97 mb
Download

Go to site of 240

Summary
  • Casio QT-6600 - page 1

    QT-6600 T ouc h Screen Smar t T erminal ——————————————————————— Refer ence Manual V ersion 1.0 No v ember 2008 c C C ...

  • Casio QT-6600 - page 2

    R-2 Preface This manual is intended to be used as a reference to the QT-6600 system. It provides details to allow whole understanding of the system capabilities, its operation, and how it can be used to solve many problems within the retail outlet. This manual does not describe actual programming, which is covered in the QT-6600 programming manual. ...

  • Casio QT-6600 - page 3

    R-3 QT-6600 Reference Manual Introduction The QT-6600 i s a versatile intelligent terminal developed in accordance with the following concepts. 1) System concept Developing a high performance economical system by adopting the restaurant, bar, fast food system. – Shared check tracking The QT-6600 system has the capability of check tracking system. ...

  • Casio QT-6600 - page 4

    Contents R-4 T o prevent malfunctions caused b y the weak batteries, char ge the memory protection batteries for over 12-hours before installation or after a longtime vacation (over 30 days). • Before installation, initialize the terminal and leave it power on over 12-hours. • After a longtime vacation, initialize the terminal and restore the p ...

  • Casio QT-6600 - page 5

    R-5 QT-6600 Reference Manual 1. Har dware configuration ..................................................................... R-10 1-1. General configuration ............................................................................................ R-10 1-2. Hardware diag ram ....................................................................... ...

  • Casio QT-6600 - page 6

    Contents R-6 2-7-1. Arrangement k ey function ..................................................................................... R-51 2-7-2. Arrangement progr am example ............................................................................. R-55 2-7-3. Scheduled e x ecution of arrangement function ......................................... ...

  • Casio QT-6600 - page 7

    R-7 QT-6600 Reference Manual 3-1-3. INIT 2 ................................................................................................................... . R-89 3-1-4. INIT code ............................................................................................................... R-89 3-2. IPL (Initial Pr ogram Loading) .............. ...

  • Casio QT-6600 - page 8

    Contents R-8 3-7-1. A uto-progr amming functions ............................................................................... R-129 3-7-2. A uto-progr am operation and CF card utilities ...................................................... R-130 4. Registrations ................................................................................... ...

  • Casio QT-6600 - page 9

    R-9 QT-6600 Reference Manual 1. Har d ware configuration ......................................................................... R-10 1-1. Gener al configuration .................................................................................... R-10 1-2. Hardw are diagram ......................................................................... ...

  • Casio QT-6600 - page 10

    R-10 Hardware Configuration 1. Hardware configuration This section outlines the hardware, optional devices, and configurations of the QT-6600 system. 1-1. General configuration C C C Touch screen panel Display on/off key Pilot lamp i-Button key receiver (only for QT-6600-DLS) Microphone Stand Customer display Power switch cover Panel fixing screw C ...

  • Casio QT-6600 - page 11

    R-11 QT-6600 Reference Manual Scanner Dra wer Dra wer Remote displa y QT -6060D Slip printer SP-1300 MODEM or PC CPU RAM Flash Memor y 32MB 64MB NOR FROM 64MB Note: Shadowed de vice and dot line indicate option devices. QT -6061CB or QT -6062CB PRT -CB-8A/-8B PRT -CB-8C PRL-CB-2 CA T5 UTP cable Remote printer UP-400 Remote printer UP-400 Po w e r s ...

  • Casio QT-6600 - page 12

    R-12 Hardware Configuration 1-3-2. Hard key code of keyboard 1-3. Keyboard 1-3-1. Standard keyboard PLU010 PLU020 PLU030 PLU040 PLU050 PLU060 PLU070 PLU009 PLU019 PLU029 PLU039 PLU049 PLU059 PLU069 PLU008 PLU018 PLU028 PLU038 PLU048 PLU058 PLU068 PLU007 PLU017 PLU027 PLU037 PLU047 PLU057 PLU067 PLU006 PLU016 PLU026 PLU036 PLU046 PLU056 PLU066 PLU00 ...

  • Casio QT-6600 - page 13

    R-13 QT-6600 Reference Manual 1-4. Display 1-4-1. Main display part 1 Main display part: Used for displaying numeric entries, registration, subtotal amount, etc. 2 Menu level display part: Used for displaying the current shift PLU, menu sheet and 2nd unit price level. 3 Keyboard part: Mainly used for keyboard (sometimes it is used for pop-up window ...

  • Casio QT-6600 - page 14

    R-14 Hardware Configuration 1-5. Cash drawer In case of connecting drawer, follow the procedure below. Connect the drawer. 1. Connect drawer connector (three color lead on drawer) to the terminal. 2. Connect frame drawer connector (green lead on drawer) to the terminal. Mount the cash register. 1. Screw in 2 fixing screws bottom side of the termina ...

  • Casio QT-6600 - page 15

    R-15 QT-6600 Reference Manual 1-6. Input/output connectors Power switch Main power switch is located in the power switch cover. Input /output connectors Inline connector, COM port, and drawer cable are located in the backside connector cover. DISPLA Y SCANNER PC/MODEM COM3 COM6 COM2 COM5 COM1 COM4 SPK PS/2 KEYBOARD MIC LAN Brightness COM3 COM6 COM2 ...

  • Casio QT-6600 - page 16

    R-16 Hardware Configuration 1-7. Optional peripherals The following optional peripherals can be used by plugging them into the appropriate port. 1) Personal computer / MODEM: RS-232C COM 1 port 2) Scanner: RS-232C COM 2 port Hand-held scanner, Fixed scanner 3) Slip printer: RS-232C COM 2 port SP-1300 In case of installing both scanner and slip prin ...

  • Casio QT-6600 - page 17

    R-17 QT-6600 Reference Manual 1-8. System configuration This section represents the system configuration of the QT-6600. The QT-6600 have four different system configurations, such as 1. Shared check tracking/ floating clerk interrupt system, 2. Inline collection/ consolidation system, 3. Online collection/ consolidation system, and 4. Online colle ...

  • Casio QT-6600 - page 18

    R-18 Hardware Configuration Available peripherals versus ECR definition ✓ : Available Available combinations ECR definition ✓ : Available Note: 1) Please follow the system recommendation above. Otherwise the system performance may be slow down. Peripherals ECR definition Remote Slip PC/ printer printer MODEM Check master ✔✔✔ Check backup ...

  • Casio QT-6600 - page 19

    R-19 QT-6600 Reference Manual PC Via COM 1 port of the master terminal or Inline (wire or wireless) Maximum 32 terminals C C C C C C C C C C 1-8-2. Inline collection/consolidation system • Inline collection/consolidation and auto-programming for up to 32 terminals. 1-8-3. Online collection / consolidation system • Online collection / consolidat ...

  • Casio QT-6600 - page 20

    R-20 Hardware Configuration PC Maximum 32 terminals ADSL/FTTH MODEM ADSL/FTTH MODEM VPN rooter VPN rooter Internet C C C C C C C C C C 1-8-4. Online collection / consolidation system (use FTP feature) • Online collection / consolidation and auto-programming for up to 32 terminals. ...

  • Casio QT-6600 - page 21

    R-21 QT-6600 Reference Manual 2. Application systems ............................................................................ R-23 2-1. General description of application system ....................................... R-23 2-1-1. File concept ................................................................................................... R-2 ...

  • Casio QT-6600 - page 22

    R-22 Application System 2-11. Sign on control .................................................................................... R-68 2-11-1. Sign on .......................................................................................................... R-68 2-11-2. Solution to abnormality of master ter minal .................................. ...

  • Casio QT-6600 - page 23

    R-23 QT-6600 Reference Manual 2. Application systems This section describes the configuration of application system and their related setting with the QT-6600. Reading this section provides a general understanding of the overall system of the terminal. 2-1. General description of application system 2-1-1. File concept Programming data for each func ...

  • Casio QT-6600 - page 24

    R-24 Application System Calculation Fixed totalizer Scanning PLU file PLU file Subdept. file Dept. file Group file Clerk detail file Other file Function key totalizer Registration *1 *1 *1 *2 Registration data flow *1 Linking between PLUs/ scanning PLUs, subdepartments, departments and groups can be programmed to meet the needs of the retail enviro ...

  • Casio QT-6600 - page 25

    R-25 QT-6600 Reference Manual 2-1-3. Function keys The keys on the keyboard can be assigned various functions that are used for registration as required for the terminal. For convenience sake, these functions are called by function keys. There are two types of function keys: 1) System keys Numeric keys, clear key, home position key, end key, left / ...

  • Casio QT-6600 - page 26

    R-26 Application System 2-1-5. Mode control With the QT-6600, each clerk can be programmed to enable or disable operations in the following modes: – REF mode – REG – mode – REG mode – X/Z mode – Program 1 ~ 6 mode – Manager mode – Inline X/Z mode – Inline auto program – CF backup / restore mode Also, each clerk can be programmed ...

  • Casio QT-6600 - page 27

    R-27 QT-6600 Reference Manual 2-1-7-2. Validation print control The QT-6600 allows use of the slip printer (SP-1300) for validation printing of item registrations, function registrations and sales totals. To perform validation printing, insert the validation paper into the slip printer, and then press the <VALIDATION> key (function code 037). ...

  • Casio QT-6600 - page 28

    R-28 Application System Description Program location Items on the fix ed totalizer report PGM3; Report Control1 in General Feature Items zero skip PGM3; Report Control2 in General Feature A verag e spend/item on monthly report PGM3; Report Control2 in General Feature PLU order (memory / random code) PGM3; Report Control2 in General Feature Print / ...

  • Casio QT-6600 - page 29

    R-29 QT-6600 Reference Manual 2-2. General description of individual function keys This section describes individual function key that can be assigned to the keys on the keyboard of QT-6600. 2-2-1. System keys The system key consist on a non-programmable function key. The following system keys are available. 1) Numeric keys (0, 1 ~ 9, 00, decimal p ...

  • Casio QT-6600 - page 30

    R-30 Application System 2-2-2. Finalize keys This section covers the general description of each finalize key, with its respective options. Finalize keys have programmable functions which may be used as required. 1) Tender key This key is used for finalizing transactions. Up to six media in drawer totalizers are reserved in the fixed totalizer file ...

  • Casio QT-6600 - page 31

    R-31 QT-6600 Reference Manual 7) Table transfer key (Function code 014) This key is used to transfer the contents of a receipt to another check. Programmability: Refer to page 98 of the programming manual. 8) Tip key (Function code 015) This key is used to register tips. Programmability: Refer to page 99 of the programming manual. 9) Normal receipt ...

  • Casio QT-6600 - page 32

    R-32 Application System 18) Plus key (Function code 029) This key is used for registering surcharge. This operation affects the surcharge amount in the plus key totalizers. The registered amounts is not added to the department, PLU or gross totalizers, but from the net totalizers only. (selecting GROSS specification) Programmability: Refer to page ...

  • Casio QT-6600 - page 33

    R-33 QT-6600 Reference Manual 30) Arrangement key (Function code 044) This key is used to activate an arrangement program programmed in the arrangement file. Any operation that can be performed from the keyboard, as well as mode, can be programmed in an arrangement program, and can be performed merely by pressing this key. The mode control function ...

  • Casio QT-6600 - page 34

    R-34 Application System 41) Table number key (Function code 058) This key is used to input table numbers. 42) Food stamp status shift key (Function code 059) The food stamp status is programmed for the departments, subdepartments, PLUs, minus, plus, discount and premium keys. Pressing this key during registration converts food stampable item to non ...

  • Casio QT-6600 - page 35

    R-35 QT-6600 Reference Manual 56) Receipt On / Off key (Function code 076) This key is used to change the status “ Receipt issue ” or “ No receipt. ” 57) Taxable amount subtotal key (Function code 077) This key is used to obtain taxable amount subtotal. Programmability: Refer to page 106 of the programming manual. 58) Operator number key (F ...

  • Casio QT-6600 - page 36

    R-36 Application System 69) Old check key (Function code 092) This key is used in a check tracking system to input the number of an existing check (previously created by the New check key) whose details are stored in the check tracking memory. Existing checks are reopened to perform further registration or to finalize them. Programmability: Refer t ...

  • Casio QT-6600 - page 37

    R-37 QT-6600 Reference Manual 83) Post entry key (Function code 115) This key is used in a check tracking or clerk interrupt system to indicate the reserved item of set menu and register it as a fixed item later on. – Enter post entry Press this key while the window is opened, the key descriptor appears on the screen and it is registered as a res ...

  • Casio QT-6600 - page 38

    R-38 Application System 97) Number look up key (Function code 138) This key is used to register a scanning PLU item whose scanning code is set to this key. 98) Split payment (Dutch account) key (Function code 140) This key is used to share the total payment by customer. Programmability: Refer to page 113 of the programming manual. 99) Not found PLU ...

  • Casio QT-6600 - page 39

    R-39 QT-6600 Reference Manual Order Order Up to 12 QT -6600 terminals CHK/M CHK/BM PRN (1) PRN (2) LAN Printer RS-232C Printer Order Order Order PRN (1) PRN (2) PRN(3) Up to 16 remote printers Slip inline C C C C C C C C QT -6600 QT -6600 QT -6600 Print buff er 1 Remote Printer 23 2-3. Remote printer control Up to 16 printers for printing kitchen o ...

  • Casio QT-6600 - page 40

    R-40 Application System 2-3-2. Remote printer control setting Remote printer settings: After changing the DIP switch configuration, remote printer initialization (power on by pressing the <FEED> key) is necessary. UP-400 Dip switch is located at the bottom of the printer. SW No . Function Reset by DTR reser v ed Protocol T ransmision speed P ...

  • Casio QT-6600 - page 41

    R-41 QT-6600 Reference Manual Memory allocation of files required when remote printers are connected • Printer buffer (file 035) (Reallocate these files, if the file sizes are not enough.) Other setting • General machine features 2-3-3. Remote printer output control The following print items are controlled by programming. • 0 to 9 line feed a ...

  • Casio QT-6600 - page 42

    R-42 Application System Remote printer print sample 1) Order printing (Normal receipt printing with amount) Check No. 123456 MC #01 — Check number / Machine ID REG C 01 15-12-2003 12:34 001230 — Mode / Clerk / Date / Time / Consecutive No. 1 Lemon Tea •1.00 — Order with amount *Soft Drinks* — Order character 2 Coffee •2.00 — Cut 2) Or ...

  • Casio QT-6600 - page 43

    R-43 QT-6600 Reference Manual 4) Order printing (Set menu/preparation/condiment) Check No. 123456 MC #01 REG C 01 15-12-2003 12:34 001267 2 Steak Set — Set menu 2 Medium — Detail item 2 Salad 1 Pizza — Main item 1 Soft — Preparation 1 Cheese — Condiment 1 Tomato 1 Pizza — Main item #123456 — Main item PLU No. 1 Soft — Preparation (w ...

  • Casio QT-6600 - page 44

    R-44 Application System Order Order Up to 12 QT -6600 terminals CHK/M CHK/BM PRN (1) PRN (2) LAN Printer RS-232C Printer Order Order Order PRN (1) PRN (2) PRN(3) Up to 16 remote printers Slip inline C C C C C C C C 2-4. Check tracking system 2-4-1. Shared check tracking system Up to 12 terminals can be included in the cluster and check tracking can ...

  • Casio QT-6600 - page 45

    R-45 QT-6600 Reference Manual Shared check tracking processing in one cluster is performed as shown in the figure shown above. 1 A shared check operation (such as “ new check ” or “ old check ” etc.) is made at a terminal. 2 The terminal sends the check number to the check tracking master and the backup master. The master and backup master ...

  • Casio QT-6600 - page 46

    R-46 Application System 2-5. Other check tracking system control 2-5-1. The timing to clear check detail and index file after finalization There are two timings to clear detail and index files. 1. The check is cleared after printing finalized data on slip or guest check receipt, or the check is also cleared when the new or old check operation is ma ...

  • Casio QT-6600 - page 47

    R-47 QT-6600 Reference Manual 1. Without entering new check No., register items. After all ordered item have been registered, press the <STORE> key at the entrance to summarize the registered items. The check No. is issued automatically. The contents of these check No. transfer to the check tracking master / backup Master. 2. Press the <RE ...

  • Casio QT-6600 - page 48

    R-48 Application System Clerk 1 Clerk 2 Clerk 3 Registration Registration Registration Registration Registration Registration Finalization Finalization Finalization Guest receipt issuance Guest receipt issuance Guest receipt issuance Sign on clerk 2 (clerk 1 registration put on hold) Sign on clerk 3 (clerk 2 registration put on hold) Sign on clerk ...

  • Casio QT-6600 - page 49

    R-49 QT-6600 Reference Manual 2-6-2. Clerk detail memory The terminal can summarize any daily / periodic total memory (such as fixed totalizer, department, PLU, etc.) clerk by clerk. After initialization, clerks have 10 detail memories which are assigned to gross, net, and 4 media in drawers. If you want to set more detail memories to clerks, alloc ...

  • Casio QT-6600 - page 50

    R-50 Application System 3. The manager enters his/her secret code and press the <YES> key. After this operation, the prohibited transaction can be registered. 4. Perform manager operation (in this example; void opera- tion). 5. Pressing the <MODE> and <REG> key is required, when the manager returns his/ her office. Note: Another m ...

  • Casio QT-6600 - page 51

    R-51 QT-6600 Reference Manual 2-7. Arrangement key function and scheduler The arrangement key function provides a macro command function for the QT-6600 system. Any operation that can be performed using the keyboard of the QT-6600 can be programmed to the arrangement file (file 038 ~ 438). Any operation programmed to the arrangement file can be per ...

  • Casio QT-6600 - page 52

    R-52 Application System Note: • Set a “ %GET ” command, first, to use the number entered by the arrangement key later. • When the “ %GET ” is programmed following constant number input, the constant number is saved to the parameter save buffer. • Numbers input using a “ %PUT ” command or by “ ( [number] ) ” are entered to the ...

  • Casio QT-6600 - page 53

    R-53 QT-6600 Reference Manual 5) Controlling the flow of arrangement command execution There are 32 commands for controlling the flow of arrangement command execution: :Snnnn : This is a start mark of an arrangement. “ nnnn ” (4-digits code) are used for arrangement table number set to each arrangement key. (nnnn) : “ nnnn (no digit limitatio ...

  • Casio QT-6600 - page 54

    R-54 Application System ? : Force to execute the arrangement even if an error occurred during the arrangement. ANO : Disable clerk auto sign-off. AYES : Enable clerk auto sign-off. CFFMT : Format CF card. CFSVnnn’mmmm’ : Backup to CF card (nnn: command code, mmmm: file name). CFLDnnn’mmmm’ : Restore from CF card (nnn: command code, mmmm: fi ...

  • Casio QT-6600 - page 55

    R-55 QT-6600 Reference Manual 2-7-2. Arrangement program example This section shows examples of arrangement programs. The following example shows an arrangement program that executes X consolidation of the file set in the batch 1 ~ 9 files for all terminals. Example: Programming the following operation for the arrangement table 12 – Set the mode ...

  • Casio QT-6600 - page 56

    R-56 Application System 2-8. Making graphic logo A graphic logo can be printed on UP-400 / UP-360 receipt. This graphic logo is stored in the graphic logo file ( file 047 for UP-400 / UP-360), and printed at the top of the receipt instead of a normal logo message. This graphic logo data cannot be made by the terminal program, it can be made only by ...

  • Casio QT-6600 - page 57

    R-57 QT-6600 Reference Manual 2-9. Hourly item This function enables to memorize the detailed data of quantity and amount / price of each item dealt hourly. It is possible to calculate the proceeds and record the hourly item in any totalizer, and also it is possible to print out as an hourly item report. 2-9-1. Programming necessary files before us ...

  • Casio QT-6600 - page 58

    R-58 Application System 2-10. Time and attendance This function allows shop owners to control his / her employees ’ working condition. Time & attendance require the following files. – Employee file This file is used to regulate the labor conditions. You can program the type of job, the maximum work hours in a week or shift schedule of a day ...

  • Casio QT-6600 - page 59

    R-59 QT-6600 Reference Manual – Work time file This file is used to administrate each employees ’ weekly hourly wages, work hours. – Time zone file This file is used to administrate the cycle time. You can specify the length of time zone. 2-10-1. Corresponding relations of the file Employees ’ job assign This function is used to assign a jo ...

  • Casio QT-6600 - page 60

    R-60 Application System Employee ’ s Schedule and total business results per week • • • • • • • • • • • • • • • Emplo yee 1 Emplo yee 1 Emplo yee 1 Emplo yee 1 Emplo yee 1 Emplo yee 1 Emplo yee 1 Emplo yee 1 Emplo yee 1 Emplo yee 2 Emplo yee 2 Emplo yee 2 Emplo yee 2 Emplo yee 2 Emplo yee 2 Emplo yee 2 Emplo yee 2 Fi ...

  • Casio QT-6600 - page 61

    R-61 QT-6600 Reference Manual Calculating the total wages of the employees per hour Calculating the total wages of the employees per week Weekly wages per employee = Total of daily wages *1 (Worktime < Programmed weekly worktime value) or = Total of weekly wages *2 (Worktime Programmed weekly worktime value) *1 Daily wages = Regular time cost + ...

  • Casio QT-6600 - page 62

    R-62 Application System 2-10-2. Clock-in operation This function is used to register the Starting work time. If the total worktime is greater than the daily/ weekly programmed time, minor employee cannot be clocked in. (Error 169 occurs) In this case, clock-in by manager. 2-10-2-1. Clock-in operation (1) Program: Not using the window and impossible ...

  • Casio QT-6600 - page 63

    R-63 QT-6600 Reference Manual 2-10-2-2. Clock-in operation (2) Program: Allow to specify job code = YES, Display job code window = NO (Refer to the page 62 of the programming manual.) Operation 1. XXXXXX . YY <CLOCK-IN> When this message appears, press the <YES> key to register the start of working hours. Enter the employee No. (within ...

  • Casio QT-6600 - page 64

    R-64 Application System 2-10-2-4. Clock-in operation (4) Program: Display job code window = YES Allow to clock-in with non-preset job code = YES (Refer to the page 62 of the programming manual.) Operation 1. XXXXXX <CLOCK-IN> 2. Choose the appropriate Job Code from the CLOCK-IN menu, and press the <YES> key to register the start of work ...

  • Casio QT-6600 - page 65

    R-65 QT-6600 Reference Manual 2-10-3. Clock-out operation This function is used to register the ending work time. 2-10-3-1. Clock-out operation (1) Operation 1. XXXXXX <CLOCK-OUT>. 2. When this message appears, press the <YES> key to register the end of working hours. 2-10-3-2. Clock-out operation (2) Program: Tip declaration compulsory ...

  • Casio QT-6600 - page 66

    R-66 Application System 2-10-3-3. Break-in operation This function is used for the employees to register a recess. Operation 1. XXXXXX <BREAK-IN>. 2. When this message appears, press the <YES> key to register the start of a recess. The receipt is not printed out, except electronic journal. 2-10-3-4. Break-out operation This function is ...

  • Casio QT-6600 - page 67

    R-67 QT-6600 Reference Manual ...

  • Casio QT-6600 - page 68

    R-68 Application System 2-11. Sign on control This function is used to prohibit the sign-on operation by an employee who has not CLOCK-IN. The following conditions should be fixed. • Use only one terminal (master terminal) for the CLOCK-IN/OUT operation. This terminal should be connected inline to the satellite terminals. But the time and attenda ...

  • Casio QT-6600 - page 69

    R-69 QT-6600 Reference Manual 2-11-2. Solution to abnormality of master terminal When the satellite terminals cannot receive any information from the master terminal, the master terminal shows the error message on the window and prints out the receipt with terminal IDs that failed to communicate the data. Receipt image MC #01 — Header REG C 01 12 ...

  • Casio QT-6600 - page 70

    R-70 Application System 2-12. IDC (Item Data Capture) This function is used for capturing all the registered item data by the REG / REF / REG – modes. IDC file stores these captured items. If there is no record to capture item data, the new data are not captured to the IDC file. 2-12-1. Available capturing items Select the appropriate items that ...

  • Casio QT-6600 - page 71

    R-71 QT-6600 Reference Manual IDC function file ● : Available items to be programmed as target for IDC. O : IDC target – : Out of target House Bon *1 114 O Post entry 115 – Round repeat 116 – Open check 117 – ● Media change 118 O Seat number 119 – Display On/Off 120 – Mode 124 – ● Eat-in 128 O ● Takeout 129 O ● Store 130 O R ...

  • Casio QT-6600 - page 72

    R-72 Application System *1 This function itself is not captured. But it is captured with the captured items or functions. *2 Selective item subtotal is captured with selective item discount or premium. *3 1. Error correct is not captured. 2. This function itself is not captured. But it is captured with voided items. 3. Void reason is also captured. ...

  • Casio QT-6600 - page 73

    R-73 QT-6600 Reference Manual 2-12-2. Set up the IDC start / end Specify IDC Start or IDC End in manager mode. IDC does not start if you not allocate necessary files for IDC. • When IDC function is stopped, you can restart IDC by performing FC or INIT 2 (Refer to the page 11 of the programming manual.) Operation Note: 1. If you stop the IDC when ...

  • Casio QT-6600 - page 74

    R-74 Application System 2-12-3. How to memorize the captured items Flow of the transferring data 1. Program: “ Store data = Whole transaction for IDC (1) ” and “ Item only for IDC (2) ” (refer to the page 64 of the programming manual.) Example PLU 0001 ——— > Memorized all the transaction into the IDC file (1) PLU 0002 ——— > ...

  • Casio QT-6600 - page 75

    R-75 QT-6600 Reference Manual File-# *1 V oid reason Unit price Item status *4 Amount Quantity Descriptor Dept link Random code 03 5 1 1 13 15 20 25 T ype *2 Mc ID 1 03 60 30 Rec-# *1 9 2 T ax status *3 32 33 Group link 34 Shift price level 38 not used not used 39 37 2-12-4. IDC data file structure Top record (Top record of each IDC file) Header 0 ...

  • Casio QT-6600 - page 76

    R-76 Application System New balance fee File-# *1 New balance fee Descriptor 05 9 12 30 60 T ype *2 1 03 Mc ID Not Used Rec-# *1 3 2 Cashing a check File-# *1 05 9 16 26 31 41 57 21 60 T ype *2 1 03 Amount tendered Change amount Cashing a check fee Mc ID Not Used Not Used Not Used Descriptor Rec-# *1 3 2 Text print, Text recall 03 5 50 File-# *1 1 ...

  • Casio QT-6600 - page 77

    R-77 QT-6600 Reference Manual + / - / Coupon 0 03 Mc ID Amount Item status *4 Rec-# *1 T ype *2 No. Unit Price Decsriptor Not Used 35 1 1 13 18 23 1 60 28 44 9 File-# *1 2 T ax status *3 %+ / %- Amount Item status *4 Not Used Not Used Rate not used Rate decimal position 13 18 23 28 33 34 35 51 0 03 Mc ID Rec-# *1 T ype *2 Not Used Descriptor 25 1 1 ...

  • Casio QT-6600 - page 78

    R-78 Application System Media change / Tray total Store Eat-in / Takeout Not Used Not Used 03 Mc ID Rec-# *1 T ype *2 05 3 0 14 Descriptor 9 60 13 File-# *1 2 Not Used Check-# Rec-# *1 T ype *2 File-# *1 Not Used 03 Mc ID 05 9 14 60 13 Subtotal amount 20 26 Descriptor 42 2 Rec-# *1 T ype *2 File-# *1 Amount Not Used 03 Mc ID 05 9 14 V A T exempt am ...

  • Casio QT-6600 - page 79

    R-79 QT-6600 Reference Manual Cancel Rec-# *1 T ype *2 File-# *1 Amount Not Used 03 Mc ID 05 9 14 Descriptor 30 50 13 2 Loyalty discount Selective item status-# Not Used Record-# Not Used Rate 0 03 Mc ID Amount Rate decimal position T ype *2 Not Used 29 16 21 26 Descriptor 48 1 60 7 5 Discount amount 31 32 3 Selectiv e item status-# 00: S T %- 01: ...

  • Casio QT-6600 - page 80

    R-80 Application System *1 File-#, Rec-#: These are stored in Hexa-decimal. If the data is “ ABCD ” , it means “ CDAB ” . *2 Type: It means record type, refer to 2-12-5 IDC data type section of this manual. *3 Tax status: • Single tax/VAT b1: T/S1, b2: T/S2, b3: T/S3, b4: T/S4, b5: T/S5, b6: T/S6, b7: T/S7, b8: T/S8, b9: T/S9, b10: T/S10 ...

  • Casio QT-6600 - page 81

    R-81 QT-6600 Reference Manual T ype of data T ype Capture item DTL TYPE_SCAN 05 Scan item DTL TYPE_SDEPT 0A Main item : Subdepartment DTL TYPE_DEPT 0F Main item : Department DTL TYPE_PLU 14 Main item : PLU DTL TYPE_SET_FIX 19 Dependent item : Set-menu/child (fixed) DTL TYPE_SET_SEL 1E Dependent item : Set-menu/child (option) DTL TYPE_COND 23 Depend ...

  • Casio QT-6600 - page 82

    R-82 Application System 2-12-6. Transferring IDC It is possible to do collection of IDC files through inline system. Refer to the terminal structure as below. Flow of the transferring IDC 1. PC sends Z-lock command by using job command to collection master. PC enables to check the Z-lock confirmation. 2. PC sends the consolidation command by using ...

  • Casio QT-6600 - page 83

    R-83 QT-6600 Reference Manual 2-13. Electronic journal There are two types of electronic journal. One is “ normal ” electronic journal, the other is “ intelligent ” electronic journal. The “ normal ” electronic journal stores all operations such as registration, report issuing and programming, but the “ intelligent ” electronic jour ...

  • Casio QT-6600 - page 84

    R-84 Application System 2-13-4. Transferring electronic journal memory It is possible to do collection of electronic journal files through inline system. Refer to the terminal structure illustrated below. Flow of the transferring electronic journal 1. PC sends the collection command by using Job command to collect electronic journal file from a sat ...

  • Casio QT-6600 - page 85

    R-85 QT-6600 Reference Manual 2-14. Simple time and attendance This function allows shop owners to control his / her employees ’ working time and clock- out reason. – Simple time & attendance file This file is used to log the clock-in time, clock-out time and clock-out reason. – Clock-out reasen file In this file, clock-out reasons stored ...

  • Casio QT-6600 - page 86

    R-86 Application System 2-14-2. Clock-out operation This function is used to register the Ending work time. Operation 1. <WORKTIME> XXXXXX (C/D) <WORKTIME> XXXXXX: Employee ’ s number C/D: Check digit for employee number 2. Select clock-out reasen. Receipt sample MC #01 — Header REG 12-31-2005 11:59 AM 001234 Simple Time/Atten Recor ...

  • Casio QT-6600 - page 87

    R-87 QT-6600 Reference Manual 2-15. Magnetic card reading QT-6600 has the following capability by swiping magnetic card. 1. Customer number entry *1 You can enter customer number, by swiping magnetic card. <CUST-#> key → Card swipe • Customer number should be programmed in the customer file. • Site No. in the mag stripe equals to the pr ...

  • Casio QT-6600 - page 88

    R-88 Application System Magenetic card specification Track-1, Format B: Start sentinel - one character (generally ‘ % ’ ) Format code = “ B ” - one character (alpha only) Primary account number (PAN) - up to 19 characters Usually, but not always, matches the credit card number printed on the front of the card. Field separator - one characte ...

  • Casio QT-6600 - page 89

    R-87 QT-6600 Reference Manual 3. Manager operation ................................................................................. R-88 3-1. Mac hine initialization ............................................................................. R-88 3-1-1. INIT ........................................................................................ ...

  • Casio QT-6600 - page 90

    R-88 Manager Operation 3. Manager operation This section describes manager operations (such as machine initialization, IPL, manager functions etc.) of QT-6600. 3-1. Machine initialization There are three different types of initialization such as INIT, FC, and INIT2. INIT; Machine initialization, all program and total data are reset. FC; Flag clear, ...

  • Casio QT-6600 - page 91

    R-89 QT-6600 Reference Manual 3-1-3. INIT 2 Initialization 2 process is as follows: Start Hardware reset Initialize work area/ buffers/flags All totoalizer reset including E-journal End Menu selection FC/Init2 Flag clear Description Choice Program code Set the default condition of receipt on/ of f . Area code: U.S. : 2 Other area (default descripto ...

  • Casio QT-6600 - page 92

    R-90 Manager Operation IPL via LAN port CF card IPL source IPL target IPL Data CF card slot is located on the leftside of the terminal. C C IPL source LAN port defined as FTP server IPL target IPL Data PC C C 3-2-2. System configuration before IPL operation Insert the IPL CF card to the terminal or connect PC and target terminal. Start END Restore ...

  • Casio QT-6600 - page 93

    R-91 QT-6600 Reference Manual 3-3. Manager function Using the manager function makes it possible to control the terminal conditions. The contents of the manager function are as follows: 1. System connection check 2. Remote on 3. Remote off 4. Busy reset 5. Stock maintenance 6. Drawer for clerk 7. CHK# (Clerk interrupt) 8. Order ID change 9. Error l ...

  • Casio QT-6600 - page 94

    R-92 Manager Operation MGR C01 10-10-01 12:34 000000 Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change ↓ 0.00 3-3-1. System connection check This command shows the connection status of terminals, and printers. 1. Sign on a clerk (if necessary ...

  • Casio QT-6600 - page 95

    R-93 QT-6600 Reference Manual 3-3-2. Remote on This command is used to power on the terminals connected with the same inline. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 2. Remote On ” and press the <YES> key. 4. Select all terminals or individual terminal, select “ YE ...

  • Casio QT-6600 - page 96

    R-94 Manager Operation 3-3-4. Busy reset This command is used to release the busy flag of the check used by other dead terminal. Executing this command always releases this flag, so please be careful to perform this operation. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 4. Busy ...

  • Casio QT-6600 - page 97

    R-95 QT-6600 Reference Manual 3-3-5. Stock maintenance This command is used to update PLU, scanning PLU, department stock quantities brought by purchasing or inventory processing. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 5. Stock Maintenance ” and press the <YES> key. ...

  • Casio QT-6600 - page 98

    R-96 Manager Operation 3-3-6. Drawer for clerk This command is used to designate the drawer 1 ~ 2. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 6. Drawer for Clerk ” and press the <YES> key. The display shows “ Clerk name/Drawer No. ” list. 4. Select the drawer No. fi ...

  • Casio QT-6600 - page 99

    R-97 QT-6600 Reference Manual 3-3-8. Order ID change This command is used to change the target printer of order temporarily. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 8. Order ID Change ” and press the <YES> key. 4. Select “ YES ” of the Definition Enable field, an ...

  • Casio QT-6600 - page 100

    R-98 Manager Operation 3-3-9. Error log print This command is used to display / print out the error log file. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 9. Error Log Print ” and press the <YES> key. 4. The display shows current error log. Then press the <ESC> key. ...

  • Casio QT-6600 - page 101

    R-99 QT-6600 Reference Manual 3-3-10. System re-configuration This command is one procedure of down recovery. It backs the contents of the system connection table to the original value. It should be executed under these conditions: 1) After issuing “ Open check report ” . 2) All terminals are connected and work without any trouble. (Check by sy ...

  • Casio QT-6600 - page 102

    R-100 Manager Operation 3-3-11. Item Data Capture You can change the IDC status (capture transaction data or not) by the operation described below. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 11. Item Data Capture ” and press the <YES> key. 4. Choose the option “ YES ( ...

  • Casio QT-6600 - page 103

    R-101 QT-6600 Reference Manual 3-3-12. Euro change over After this operation, the following subjects are made: (1) The Euro is defined as main currency and the local is defined as sub currency. (2) All totals and counts are reset. (3) Unit prices (department, subdepartment, PLU, 2nd @, shift PLU) are converted in Euro. Before “ change over operat ...

  • Casio QT-6600 - page 104

    R-102 Manager Operation 3-3-13. Clerk window You can program clerk window contents in the MGR mode. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 13.Clerk Window ” and press the <YES> key. 4. Press the <YES> key to continue. 5. Select the clerk window. If you don ’ ...

  • Casio QT-6600 - page 105

    R-103 QT-6600 Reference Manual 3-3-14. Customer You can program (add / modify / delete) the customer (name, address etc.) in the MGR mode. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 14.Customer ” and press the <YES> key. 4. Add customer: Select (New customer) and press ...

  • Casio QT-6600 - page 106

    R-104 Manager Operation 3-3-15. Customer busy reset This command is used to release the busy flag of the customer used by other dead terminal. Executing this command always releases this flag, so please be careful to perform this operation. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Selec ...

  • Casio QT-6600 - page 107

    R-105 QT-6600 Reference Manual 3-3-17. Print batch maintenance file This command is used to print batch maintenance file. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 17. Print Batch Mainte ” and press the <YES> key. MGR C 01 10-10-01 12:34 000000 Manager Mode 10.System R ...

  • Casio QT-6600 - page 108

    R-106 Manager Operation 3-3-18. Execute batch maintenance file This command is used to execute batch maintenance file. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 18. Execute Batch Mainte ” and press the <YES> key. 4. Press the <YES> key if Scan item Z report has a ...

  • Casio QT-6600 - page 109

    R-107 QT-6600 Reference Manual 3-3-19. Re-index the scanning PLU file This command is used to re-index the scanning PLU file. After this command, send the scanning PLU file to all terminals of the cluster. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 19. Re-index Scan File ” an ...

  • Casio QT-6600 - page 110

    R-108 Manager Operation 3-3-20. Licence code entry This command is used to enter the software licence code. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 20. Licence code entry ” and press the <YES> key. 4. Enter the licence code and press the <YES> key and select ? ...

  • Casio QT-6600 - page 111

    R-109 QT-6600 Reference Manual 3-3-22. Maintenance data This command is used to backup the maintenance data to the CF card or clear the data in the internal flash memory. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Select “ 22. Maintenance Data ” and press the <YES> key. 4. Selec ...

  • Casio QT-6600 - page 112

    R-110 Manager Operation 5. You can enter file prefix, if you want to change. And select “ YES ” and press the <YES> key. The log file contains; • System error log: LOGFILE.148 (file-148, 149) • Operation log: LOGFILE.248 (file-248, 249) • Packet log: LOGFILE.348 (file-348, 349) 6. Insert the CF card and press the <YES> key. ? ...

  • Casio QT-6600 - page 113

    R-111 QT-6600 Reference Manual 3-3-24. Clerk number You can program clerk number directly to the <CLK#> key in the MGR mode. 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Manager> to assign manager mode. 3. Enter “ 00 ” and the clerk number you want to set and press the appropriate <CLK#> key. (Entering “ 000 ...

  • Casio QT-6600 - page 114

    R-112 Manager Operation 3-4. System command execution System command functions are provided to perform nonregistration operations, such as collection / consolidation system control, backup / restore operation of files in the terminals, and remote power on / off control. This chaptershows the X/Z code system for your reference. 3-4-1. X/Z reporting ...

  • Casio QT-6600 - page 115

    R-113 QT-6600 Reference Manual Meaning of the command data (Other report) Digit V alue Meaning 0 No edition 1 Editing by group D 7 2 Editing by department 3 Editing by subdepartment 4 Editing by order character 0 No extraction D 6 1 Inactive (Zero sales) 0 No extraction D 5 1 By Range 3 Clerk individual 0 Execution in X mode D 4 1 Execution in Z mo ...

  • Casio QT-6600 - page 116

    R-114 Manager Operation 3-4-2. X/Z collection / consolidation X/Z collection / consolidation execution Inline X/Z mode → D 14 D 13 D 12 D 11 D 10 D 9 D 8 D 7 D 6 D 5 D 4 D 3 D 2 D 1 <#-2> → <ESC> Meaning of the command data Digit V alue Meaning D 4 D 3 00 All terminal 01 ~ 32 T erminal ID of individual terminal D 2 D 1 10 Remote po ...

  • Casio QT-6600 - page 117

    R-115 QT-6600 Reference Manual 3-5. Data communication system The following details the inline and online data communication functions available with the QT-6600 system. 3-5-1. Inline / online connectors With the QT-6600, there are the following inline / online connectors in the rear side of the body. Inline (Standard) Ethernet RS-232C COM1 (Standa ...

  • Casio QT-6600 - page 118

    R-116 Manager Operation 3-5-2. Hardware interface 3-5-2-1. Inline interface The maximum inline cable length and the maximum connection unit will be varied by the inline communication speed as shown below figure. • Using 10BASE-T Cable length: 100m (hub to terminal, hub to hub) Maximum 4 hubs in one cluster. Maximum cable length between terminal a ...

  • Casio QT-6600 - page 119

    R-117 QT-6600 Reference Manual 3-5-2-2. Online interface Only the RS-232C COM 1 port can be connected with a modem or a personal computer. 1) Specification of RS-232C COM 1 port Communication method: Half duplex communication Configuration of connection: Point-to point Line type: Public lines / exclusive lines Starting method: Center (host computer ...

  • Casio QT-6600 - page 120

    R-118 Manager Operation 3-5-3. Inline / online functions 3-5-3-1. Inline functions The list below shows the main functions available with the QT-6600 system. In case of these functions below are executed, the satellite terminal can receive these commands even if the satellite terminal is in OFF mode. 1) X/Z data collection for each terminal 2) X/Z ...

  • Casio QT-6600 - page 121

    R-119 QT-6600 Reference Manual 3-6. Collection / Consolidation system This section provides the general description of the data collection / consolidation system of the QT-6600. The collection / consolidation system is managed by the master/satellite system using inline network. Installation of any special hardware devices is not required for colle ...

  • Casio QT-6600 - page 122

    R-120 Manager Operation File description and number list T erminal files Consolidation files File Daily Periodic 1 Periodic 2 Daily Periodic 1 Periodic 2 Consolidation description total total total consolidation consolidation consolidation work Fixed totalizer 001 101 201 301 401 501 601 T ransaction ke y 002 102 202 302 402 502 602 Subdepartment 0 ...

  • Casio QT-6600 - page 123

    R-121 QT-6600 Reference Manual Satellite Master T erminal files T erminal files Consolidation wor k 1 2 3 2 Satellite Master T erminal files T erminal files Consolidation wor k 1 , 4 2 3 2 3-6-1. X/Z collection This function is used to obtain the counters and totals of the individual terminals. 3-6-1-1. X collection processing X collection processi ...

  • Casio QT-6600 - page 124

    R-122 Manager Operation 3-6-1-3. X/Z collection command execution 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Inline>. 3. Select “ 1. Collection ” and press the <YES> key. 4. Select the types and kinds you want to collect. (Please refer to the X/Z report chapter about the report types and kinds.) 5. Select the targ ...

  • Casio QT-6600 - page 125

    R-123 QT-6600 Reference Manual Satellite Master T erminal files T erminal files Consolidation files Consolidation wor k 1 2 3 2 5 3-6-2. X/Z consolidation This function is used to obtain the sum of counters and totals of all objected terminals in the store. After consolidating data from all objected terminals, the master prints the details on the p ...

  • Casio QT-6600 - page 126

    R-124 Manager Operation Satellite Master T erminal files T erminal files Consolidation files Consolidation wor k 1 , 6 2 3 2 5 3-6-2-2. Z consolidation processing (except scanning PLU) Z consolidation processing is performed as the figure shown below. 1 A Z consolidation command is started up from the master terminal. The master first locks an obje ...

  • Casio QT-6600 - page 127

    R-125 QT-6600 Reference Manual 3-6-2-4. X/Z consolidation command execution 1. Sign on a clerk (if necessary). 2. Press <MODE> and <Inline> to assign Inline X/Z. 3. Select “ 2. Consolidation ” and press the <YES> key. 4. Select the types and kinds you want to collect. (Please refer to the X/Z report chapter about the report ty ...

  • Casio QT-6600 - page 128

    R-126 Manager Operation Satellite Master T erminal files T erminal files Consolidation files Consolidation wor k 1 2 4 2 3 6 3-6-3. X/Z collection / consolidation This function is used to obtain the counters and totals of the individual terminals (collection) and of all objected terminals in the store (consolidation) by one procedure. After printin ...

  • Casio QT-6600 - page 129

    R-127 QT-6600 Reference Manual Satellite Master T erminal files T erminal files Consolidation files Consolidation wor k 1 , 7 2 4 2 3 6 3-6-3-2. Z collection / consolidation processing Z collection/consolidation processing is performed as the figure shown below. 1 A Z collection / consolidation command is started up from the master terminal. The ma ...

  • Casio QT-6600 - page 130

    R-128 Manager Operation 3-6-2-3. X/Z collection / consolidation command execution 1. Sign on a clerk (if necessary). 2. Press the <MODE> and <Inline> key to assign Inline X/Z. 3. Select “ 3. Collection & Consolidation ” and press the <YES> key. 4. Select the types and kinds you want to collect. (Please refer to the X/Z rep ...

  • Casio QT-6600 - page 131

    R-129 QT-6600 Reference Manual 3-7. Auto-programming function Using the auto programming function makes it possible to save and load the terminal program files. Methods available for saving the terminal program are as follows: 1) Saving onto another terminal connected through inline. 2) Saving onto a personal computer connected through inline/ onli ...

  • Casio QT-6600 - page 132

    R-130 Manager Operation 3-7-2. Auto-program operation and CF card utilities The procedures of auto program function 1. Sign on a clerk (if necessary) 2. Press the <MODE> and <AUTO PGM> key to assign “ AUTO PGM. ” 3. Select the appropriate menu you want by following the guidance. The hierarchy of the AUTO PGM menus are described belo ...

  • Casio QT-6600 - page 133

    R-131 QT-6600 Reference Manual The procedure of Data Backup to the CF card 1. Sign on a clerk (if necessary) 2. Press the <CF CARD> key to assign “ CF card. ” 3. Select the appropriate menu you want by following the guidance. Insert the CF card to the slot securely. The hierarchy of the Data Backup is described below. Data Backup menu hie ...

  • Casio QT-6600 - page 134

    R-132 Manager Operation The procedure of Data Restore from the CF card 1. Sign on a clerk (if necessary) 2. Press the <MODE> and <CF CARD> key to assign “ CF card. ” 3. Insert the CF card to the slot securely. Select “ 2. Data Restore ” and press the <YES> key. 4. Select the appropriate file you want to restore. X/Z C 01 1 ...

  • Casio QT-6600 - page 135

    R-133 QT-6600 Reference Manual The procedures of taking the file list of the CF card and deleting the file 1. Sign on a clerk (if necessary) 2. Press the <MODE> and <CF CARD> key to assign “ CF card. ” 3. Insert the CF card to the slot securely. Select “ 3. Backup File List ” and press the <YES> key. 4. In case of deleting ...

  • Casio QT-6600 - page 136

    R-134 Manager Operation ...

  • Casio QT-6600 - page 137

    R-135 QT-6600 Reference Manual 4. Registrations ........................................................................................ R-134 4-1. Clerk sign on / off operation ............................................................................ R-134 4-2. V oiding the last registered item (<V OID> ke y operation) ................... ...

  • Casio QT-6600 - page 138

    R-136 Registration 4. Registrations This section describes characteristic registrations of the QT-6600. Key catch tone, error tone volume can be controlled by the <LEFT/RIGHT ARROW> key. 4-1. Clerk sign on / off operation The following examples illustrate the clerk sign on / off operation. • When an i-Button key is used, sign on operation c ...

  • Casio QT-6600 - page 139

    R-137 QT-6600 Reference Manual 2. Enter the appropriate clerk number and press the <CLERK> key. 3) Clerk sign off operation 1. Enter “ 0 ” and press the <CLERK> key. 4-2. Voiding the last registered item (<VOID> key operation) Use the <VOID> key to cancel a data that has just been registered using a function key. The < ...

  • Casio QT-6600 - page 140

    R-138 Registration 4-3. Voiding the previous registered item (<VOID> key operation) If data has been registered using a function key and registration of the next item has begun, use the <VOID> key to cancel previous registered data. Entries using departments, subdepartments, PLUs or scan PLUs can be cancelled using the <VOID> key. ...

  • Casio QT-6600 - page 141

    R-139 QT-6600 Reference Manual 2. Press the <CANCEL> key. 3. Press the <YES> key to cancel the transaction. REG C 01 10-10-01 12:34 000001 1 PLU0001 •1.00 1 PLU0002 •2.00 3 PLU0003 •9.00 1 Cancel OK? PLU0004 •4.00 6 •16.00 REG C 01 10-10-01 12:34 000001 1 PLU0001 •1.00 1 PLU0002 •2.00 3 PLU0003 •9.00 1 PLU0004 •4.00 CA ...

  • Casio QT-6600 - page 142

    R-140 Registration 4-5. Using the list function Before using the LIST function, the following programs are necessary to use this function. 1) Allocating the <LIST> key or the <LIST-#> key (page 26 of the programming manual) In case of using the <LIST> key, <LIST> key(s) should be allocated on the keyboard before step 2. 2) P ...

  • Casio QT-6600 - page 143

    R-141 QT-6600 Reference Manual Before using the pulldown group function, the following programs are necessary to use this function. 1) Programming pulldown group (page 32 of the programming manual) 2) Programming PLU “ List Link No. ” (page 88 of the programming manual) 3) Programming item prices (page 140 of the programming manual) 1. Register ...

  • Casio QT-6600 - page 144

    R-142 Registration 4-6-3. Using the set menu and pulldown group function Before using the set menu and pulldown group function, the following programs are necessary to use this function. 1) Programming set menu table (page 33 of the programming manual) 2) Programming pulldown group (page 32 of the programming manual) 3) Programming PLU “ Set menu ...

  • Casio QT-6600 - page 145

    R-143 QT-6600 Reference Manual 2. Press the <SUBSTITUTION> key. 3. Register the appropriate item. 4-6-5. Inner multiplication Normally, the quantity of list linked PLU or set menu child PLU follows the same quantity as main PLU. But it is possible to register a different number of list linked PLU or child PLU from the number of main PLU. Befo ...

  • Casio QT-6600 - page 146

    R-144 Registration 3. Select the appropriate PLU (in case of pulldown group.) 4-7. Post entry Post entry is used to suspend the selectable item in the pulldown window of a set menu and register the selected item. For example, it is used to register dessert which is included in a set menu. (This function is only effective in check tracking operation ...

  • Casio QT-6600 - page 147

    R-145 QT-6600 Reference Manual 4-8. Separate check Separate check is used to transfer the registered items in the original check to the other check or pick up the registered items in the original check to finalize them. 1. Enter the check number to which the registered items are transferred and press the <NEW/OLD CHK> key. 2. Enter 123456 and ...

  • Casio QT-6600 - page 148

    R-146 Registration 4-9. Open check To display or print out the opened check report of the signed on operator. 1. Enter the record number of the signed on clerk. 2. Press the <OPEN CHK> key. 3. The open check report is issued or displayed (depends on the program). 4-9. Split payment (Dutch account) This key is used to share the total payment b ...

  • Casio QT-6600 - page 149

    R-147 QT-6600 Reference Manual 4-10. Media change This key is used to change media in drawer amounts. Pressing this key begins media change operation. 1. First press the <MEDIA CHANGE> key. 2. Enter the in drawer amount to be changed and press the media key to be changed. 3. Enter the amount to change and press the media to change, until the ...

  • Casio QT-6600 - page 150

    R-148 Registration 4-11. Eat-in / Takeout This function is used for specifying if the customer eat in the restaurant or takeout. 1. When the <EAT-IN> or <TAKEOUT> key is pressed before finalization, tax exemption will be applied. After registering one of these keys, it is impossible to register items except void, cancel, subtotal, final ...

  • Casio QT-6600 - page 151

    R-149 QT-6600 Reference Manual 1. Scan an not found item. 2. Press the <NFP> key, enter unit price and press the appropriate department key. Non PLU QT-6600 accepts both PLU type and non PLU type barcode. Non PLU type barcode includes item price/ weight. In case of registering non PLU type barcode, you should program Non PLU table file before ...

  • Casio QT-6600 - page 152

    R-150 Registration Add on code QT-6600 has a capavility to log the supplemental (add-on) barcode data with main barcode. The add-on code is logged to the Add on/ VMP file (file-040) with main barcode, shop code, consecutive number, date, time and item quantity. The barcode data of the main item should be programmed to the Non PLU table. Shop code i ...

  • Casio QT-6600 - page 153

    R-151 QT-6600 Reference Manual 4-13. Shift PLU This key is used to shift a flat PLU key to the n-th (n = 1 ~ 8) level or a scanning PLU to the m-th (m = 1 ~ 7).Before using this function, you should allocate the shift PLU file (file- 055), or scanning PLU shift (2) ~ (7) (file-116 ~ 616), and allocate the <SHIFT PLU> key s(function code = 065 ...

  • Casio QT-6600 - page 154

    R-152 Registration 4-15. Round repeat function This function is used for repeating registered items of the last receipt finalized by <NEW BALANCE> key in check tracking system or clerk interrupt operation. 1. To issue the original receipt. 1111 <NEW/OLD> <PLU0001> <PLU0002> <PLU0003> <NEW BALANCE> 2. Enter the ch ...

  • Casio QT-6600 - page 155

    R-153 QT-6600 Reference Manual 4-16. Mix & match / coupon Please note, that the target item of this type of mix & match is PLU, Flat-PLU, Department, Subdepartment. Before using the mix & match / coupon function, the following programs are necessary to use this function. 1) Programming mix & match table (page 63 of the programming m ...

  • Casio QT-6600 - page 156

    R-154 Registration 4-17. Customer Before using the customer function, the following programs are necessary to use this function. 1) Allocating customer file (File-037), customer group file (File-042) Check index file and check detail file are also necessary. 2) Allocating customer ID number key (148), payment key (149), table transfer key (014). 3) ...

  • Casio QT-6600 - page 157

    R-155 QT-6600 Reference Manual 4-18. Table sharing Before using the table sharing function, the following programs are necessary to use this function. 1) Allocating table sharing key (261). 2) Program to enable table sharing function (refer to the page 46 of the programming manual.) 1. In case of designating the same table (check) No. which has alr ...

  • Casio QT-6600 - page 158

    R-156 Registration 4-21. Scan Mix & match Please note, that the target item of this type of mix & match is scanning PLU. Before using the scan mix & matchfunction, the following programs are necessary to use this function. 1) Programming scan mix & match table (page 124 of the programming manual) • Discount type (mix & match d ...

  • Casio QT-6600 - page 159

    R-157 QT-6600 Reference Manual 4-22. Time calculation This function is used for time calculation (such as parking fee). Only PLU has this capability. You should allocate the additional PLU program file (file-814). And this function is only effective in the check tracking system. Time calculation requires the following files: PLU file This file is u ...

  • Casio QT-6600 - page 160

    R-158 Registration 4-23. Additional PLU character This function replaces PLU descriptor or adds other descriptor for customer/ employee convenience. PLU file This file is used for registering item. Additional PLU character file This file stores additional PLU character. This file contains, random PLU code or PLU record number, character to replace ...

  • Casio QT-6600 - page 161

    R-159 QT-6600 Reference Manual 5. Refund mode operation ....................................................................... R-158 5-1. Selecting REF or REG – mode .................................................................... R-158 ...

  • Casio QT-6600 - page 162

    R-160 Refund Mode 5. Refund mode operation The general procedure for entering the REF or REG – mode is as follows. 5-1. Selecting REF or REG – mode After sign on operation, press the <MODE> key and select the <RF> or <REG-> key to turn that mode. Refund registration or register minus (REG – ) registration starts with this op ...

  • Casio QT-6600 - page 163

    R-161 QT-6600 Reference Manual 6. Read and reset operations .................................................................. R-160 6-1. The procedures of reading or resetting ....................................................... R-160 6-2. Repor t sample ........................................................................................... ...

  • Casio QT-6600 - page 164

    R-162 Read and Reset 6. Read and reset operations By setting the mode to the X or Z, the contents of totalizers and counters are enabled to read. The X mode allows report at any time during business hours. The Z mode is only performed at the end of the business day, since it clears the data stored to the totalizers and counters. 6-1. The procedures ...

  • Casio QT-6600 - page 165

    R-163 QT-6600 Reference Manual X/Z Report Daily X Batch Batch 1 ~ n: n = 1 ~ 10 Cashier/Clerk Individual All clerk Open Check Individual Clerk All Only total (X only) All Information (X only) E-Journal E-Journal All Date & Consecutive number (X only) Reset only (Z only) R-Journal All Date & Consecutive number (X only) Customer Account Custo ...

  • Casio QT-6600 - page 166

    R-164 Read and Reset 6-2. Report sample Cashier / clerk report Z 0001017 CASHIER/CLERK 123 — Mode / Report code / Report title / Z No. (Z only) C 01 ••••••••••••••••••••••••1 — Clerk name / Drawer No. GROSS 35 •38.00 — Gross title / Counter / Totalizer NET No 10 •38.00 — Net title / totali ...

  • Casio QT-6600 - page 167

    R-165 QT-6600 Reference Manual Fixed totalizer Z 0001011 FIXED TTL 123 — Mode / Report code / Report title / Z No. (Z only) GROSS 35 •38.00 — Gross sales title / Counter / Totalizer NET No 11 •38.00 — Net sales title / Counter / Totalizer CAID •35.00 — Cash in drawer title / Cash in drawer CHID •0.00 — Charge in drawer title / Cha ...

  • Casio QT-6600 - page 168

    R-166 Read and Reset PLU (by range) X 0010074 PLU — Mode / Report code / Report title / Z No. (Z only) #0001-#0002 — PLU range PLU0001 50 •682.55 — PLU descriptor / Weight / Counter / Amount DISCOUNT -1.00 — Discount total (can be skipped) HOUSE BON QTY 12 — House Bon quantity (can be skipped) #0001 68.25% — PLU No. (can be skipped) / ...

  • Casio QT-6600 - page 169

    R-167 QT-6600 Reference Manual PLU zero sales X 0100014 PLU — Mode / Report code / Report title PLU0001 0 •0.00 — PLU descriptor / Weight / Counter / Amount DISCOUNT •0.00 #0001 — PLU No. (can be skipped) PLU0002 0 •0.00 --------------------------------------- TL 0 •0.00 DISCOUNT •0.00 PLU zero sales (by group / dept / subdept / ord ...

  • Casio QT-6600 - page 170

    R-168 Read and Reset PLU stock (by group / dept / subdept / order) X 1000064 PLU STOCK — Mode / Report code / Report title / Z No. (Z only) GROUP01 •••••••••••••••••01 — Link group (dept / subdept / order) title PLU0001 10 123.45 — PLU descriptor / Minimum stock level / Current stock #0001 — PLU No. (can be ...

  • Casio QT-6600 - page 171

    R-169 QT-6600 Reference Manual Department (all) X 0000015 DEPT — Mode / Report code / Report title / Z No. (Z only) DEPT01 24 •82.55 — Department descriptor / Counter / Amount DISCOUNT -1.00 — Discount total (can be skipped) 70.82% — Sales ratio (can be skipped) DEPT02 25 •32.00 DISCOUNT -2.00 27.45% ------------------------------------ ...

  • Casio QT-6600 - page 172

    R-170 Read and Reset Group X 0000016 GROUP — Mode / Report code / Report title / Z No. (Z only) GROUP01 6 •163.54 — Group descriptor / Counter / Amount 1.63% — Sales ratio (can be skipped) GROUP02 2 •2.55 0.02% ---------------------------------------- TL 8 •166.09 1.65% Hourly sales Z 0001019 HOURLY 123 — Mode / Report code / Report t ...

  • Casio QT-6600 - page 173

    R-171 QT-6600 Reference Manual Open check X 0050025 OPEN CHK — Mode / Report code / Report title MC #01 — Machine No. REG C 01 07-01-2005 12:34 001029 — Mode / Clerk / Date / Time / Consecutive No. CHECK No. 001245 12CT #000121 — Check No. / Cover No. / Table No. •100.35 — Subtotal amount (temporary closed by NB) MC #02 REG C 04 07-01-2 ...

  • Casio QT-6600 - page 174

    R-172 Read and Reset Employee report (daily) X 000029 EMPLOYEE — Mode / Report code / Report title / Z counter (Z only) #123456 HARRISON 123456789 — Employee No. / Employee character / Social Security No. Monday 12-20-03 — Day of the week / Date IN OUT BRK JOB# TIP WORK 08:00-10:00 00:15 12 •12.34 01:45 — Shift 1: Clock-in / Clock-out / B ...

  • Casio QT-6600 - page 175

    R-173 QT-6600 Reference Manual Hourly item Z 0001031 HOURLY PRODUCT 1234 — Mode / Report code / Report title / Z counter (Z only) 09:00->09:30 — Time frame GROSS 1357.956 •2,469.06 — Totalizer character / Counter / Amount 40% NET No 12 •2,469.06 40% — Sales ratio (Amount / Total amount of each time frame) (can be skipped) PLU0001 123 ...

  • Casio QT-6600 - page 176

    R-174 Read and Reset Customer open check (individual) X 0020047 CUSTOMER — Mode / Report code / Report title / Z counter (Z only) CUST No. 111111 * — Customer number / * New customer Mr. — Customer title (Skip if nothing is set.) John SMITH — Customer ’ s name BALANCE •10.23 — Customer ’ s balance DISCOUNT •1.23 — Discount total ...

  • Casio QT-6600 - page 177

    R-175 QT-6600 Reference Manual Mix and match X 0000061 MIX&MATCH — Mode / Report code / Report title / Z counter (Z only) Bundle A No 2 •10.46 — Discount total #01234 — Coupon No. Bundle B No 23 •120.46 #0111 --------------------------------------- TL No 25 •130.92 Scan Mix and match X 0001066 MIX&MATCH — Mode / Report code / ...

  • Casio QT-6600 - page 178

    R-176 Read and Reset Scanning PLU sales (by group / department / subdepartment) X 0010026 SALES REPORT — Mode / Report code / Report title #0001-0010 — Range (group / department / subdepartment) DEPT01 — Group / department / subdepartment descriptor #4911177008 — OBR code ERASER 1 •1.00 — Item decriptor / Counter / Amount #4901351036723 ...

  • Casio QT-6600 - page 179

    R-177 QT-6600 Reference Manual Scanning PLU Top 50 amount X 0040026 TOP 50 AMOUNT — Mode / Report code / Report title #4901351036723 — OBR code CANDY 123.012 •123.45 — Item decriptor / Counter / Amount DISCOUNT -2.50 — Discount amount #4911177008 ERASER 1 •1.00 : --------------------------------------- TL 1234.563 •130.92 — Total DI ...

  • Casio QT-6600 - page 180

    R-178 Read and Reset Not found PLU X 0010027 NOT FOUND PLU — Mode / Report code / Report title C01 — Clerk #4911177008 — OBR code DEPT01 5 •5.00 — Link department decriptor / Counter / Amount DISCOUNT -1.98 — Discount total — Barcode 4911177008 #4901351036723 DEPT01 5 •10.00 DISCOUNT -1.77 4901351036723 ...

  • Casio QT-6600 - page 181

    R-179 QT-6600 Reference Manual A-1. Function key list .................................................................................. R-178 ...

  • Casio QT-6600 - page 182

    R-180 Function key list A-1. Function key list Function Code Initial character Add check 094 Arrangement 044 Bill copy 047 Break-in / out 109 Cancel 236 Cash amount tendered 001 Charge 002 Check endorsement 039 Check print 012 Check tender 003 Clerk number 072 Clerk transfer 013 Clock-in / out 108 Coupon 023 Coupon 2 036 Coupon number 11 0 Credit 0 ...

  • Casio QT-6600 - page 183

    R-181 QT-6600 Reference Manual A-2. File f ormat .................................................................................. R-183 A-2-1. Fixed totalizer file ...................................................................... R-183 A-2-1-1 Fix ed totaliz er (daily) ......................................................................... ...

  • Casio QT-6600 - page 184

    R-182 File Format A-2-13-2 IDC file (2) ................................................................................................ R-196 A-2-13-3 IDC file (3) ................................................................................................ R-196 A-2-13-4 IDC link ................................................................ ...

  • Casio QT-6600 - page 185

    R-183 QT-6600 Reference Manual A-2-30. Chec k print file .......................................................................... R-207 A-2-30-1 Check print ............................................................................................... R-207 A-2-31. Graphic logo file ............................................................... ...

  • Casio QT-6600 - page 186

    R-184 File Format A-2-49-9 K e yboard color definition .......................................................................... R-215 A-2-49-10 K e yboard color theme .............................................................................. R-215 A-2-49-11 K e yboard bitmap image .............................................................. ...

  • Casio QT-6600 - page 187

    R-185 QT-6600 Reference Manual A-2. File format A-2-1. Fixed totalizer file A-2-1-1 Fixed totalizer (daily) File name: Fixed totalizer (daily) File No.: 001 Max. allocatable records: 85 (fixed) A-2-1-2 Fixed totalizer (periodic/consolidation) File name: Fixed totalizer (periodic 1) File No.: 101 Max. allocatable records: 85 (fixed) File name: Fixed ...

  • Casio QT-6600 - page 188

    R-186 File Format A-2-2. Transaction key file A-2-2-1 Transaction key (daily) File name: Transaction key (daily) File No.: 002 Max. allocatable records: 999 A-2-2-2 Transaction key (periodic/consolidation) File name: Transaction key (periodic 1) File No.: 102 Max. allocatable records: 999 File name: Transaction key (periodic 2) File No.: 202 Max. a ...

  • Casio QT-6600 - page 189

    R-187 QT-6600 Reference Manual A-2-4. PLU file A-2-4-1 PLU (daily) File name: PLU File No.: 004 Max. allocatable records: 9999 A-2-4-2 PLU (periodic/consolidation) File name: PLU (periodic 1) File No.: 104 Max. allocatable records: 9999 File name: PLU (periodic 2) File No.: 204 Max. allocatable records: 9999 File name: PLU (daily consolidation) Fil ...

  • Casio QT-6600 - page 190

    R-188 File Format A-2-4-4 Shift PLU (daily) File name: Shift PLU File No.: 055 Max. allocatable records: 9999 A-2-4-5 Shift PLU (periodic/consolidation) File name: Shift PLU (periodic 1) File No.: 155 Max. allocatable records: 9999 File name: Shift PLU (periodic 2) File No.: 255 Max. allocatable records: 9999 File name: Shift PLU (daily consolidati ...

  • Casio QT-6600 - page 191

    R-189 QT-6600 Reference Manual A-2-5. Scanning PLU file A-2-5-1 Scanning PLU File name: Scanning PLU File No.: 016 Max. allocatable records: 100000 OBR code 06 Link @ not used Mix & match Clerk Character PGM Counter T otalizer Discount total 22 25 30 42 47 52 53 33 36 37 A-2-5-2 Scanning PLU shift File name: Scanning PLU shift file (1) ~ (6) Fi ...

  • Casio QT-6600 - page 192

    R-190 File Format A-2-5-5 Batch maintenance File name: Batch maintenance file File No.: 070 Max. allocatable records: 1000 OBR code 07 1 Link @ not used Price level Mix & match Status Character PGM 23 26 31 39 34 37 38 A-2-5-7 Non PLU table File name: Non PLU table file File No.: 976 Max. allocatable records: 999 0 Program 5 A-2-5-8 NLU table F ...

  • Casio QT-6600 - page 193

    R-191 QT-6600 Reference Manual A-2-6. Department file A-2-6-1 Department (daily) File name: Department (daily) File No.: 005 Max. allocatable records: 99 A-2-6-2 Department (periodic/consolidation) File name: Department (periodic 1) File No.: 105 Max. allocatable records: 99 File name: Department (periodic 2) File No.: 205 Max. allocatable records: ...

  • Casio QT-6600 - page 194

    R-192 File Format Counter Totalizer 05 1 0 A-2-7. Group file A-2-7-1 Group (daily) File name: Group (daily) File No.: 006 Max. allocatable records: 99 A-2-7-2 Group (periodic/consolidation) File name: Group (periodic 1) File No.: 106 Max. allocatable records: 99 File name: Group (periodic 2) File No.: 206 Max. allocatable records: 99 File name: Gro ...

  • Casio QT-6600 - page 195

    R-193 QT-6600 Reference Manual A-2-8. Clerk file A-2-8-1 Clerk (programming) File name: Clerk (programming) File No.: 007 Max. allocatable records: 99 Commission rate Refer to the “ Commission rate ” on page 185 of the programming manual. Table range Refer to the “ Table range ” on page 185 of the programming manual. Clerk control Refer to ...

  • Casio QT-6600 - page 196

    R-194 File Format Record No. File No. 024 A-2-8-2 Clerk detail (daily, periodic / consolidation) File name: Clerk detail (daily) File No.: 011 Max. allocatable records: 9801 File name: Clerk detail (periodic 1) File No.: 111 Max. allocatable records: 9801 File name: Clerk detail (periodic 2) File No.: 211 Max. allocatable records: 9801 File name: C ...

  • Casio QT-6600 - page 197

    R-195 QT-6600 Reference Manual A-2-9. Hourly sales file A-2-9-1 Hourly sales (daily, periodic/consolidation) File name: Hourly sales (daily) File No.: 009 Max. allocatable records: 96 File name: Hourly sales (periodic 1) File No.: 109 Max. allocatable records: 96 File name: Hourly sales (periodic 2) File No.: 209 Max. allocatable records: 96 File n ...

  • Casio QT-6600 - page 198

    R-196 File Format A-2-11. Hourly item file A-2-11-1 Hourly item File name: Hourly Item (daily) File No.: 021 Max. allocatable records: 1920 File name: Hourly Item (periodic 1) File No.: 121 Max. allocatable records: 1920 File name: Hourly Item (periodic 2) File No.: 221 Max. allocatable records: 1920 File name: Hourly Item (daily consolidation) Fil ...

  • Casio QT-6600 - page 199

    R-197 QT-6600 Reference Manual A-2-12. Mix and match file A-2-12-1 Mix and match (daily) File name: Mix and match (daily) File No.: 051 Max. allocatable records: 99 A-2-12-2 Mix and match (periodic/consolidation) File name: Mix and match (periodic 1) File No.: 151 Max. allocatable records: 99 File name: Mix and match (periodic 2) File No.: 251 Max. ...

  • Casio QT-6600 - page 200

    R-198 File Format A-2-13. IDC file A-2-13-1 IDC file (1) File name: IDC (1) File No.: 057 Max. allocatable records: 100000 File name: IDC (1) (daily consolidation) File No.: 357 Max. allocatable records: 100000 File name: IDC (1) (consolidation work) File No.: 657 Max. allocatable records: 100000 A-2-13-2 IDC file (2) File name: IDC (2) File No.: 0 ...

  • Casio QT-6600 - page 201

    R-199 QT-6600 Reference Manual A-2-14. Time & Attendance file A-2-14-1 Hourly / Labor File name: Hourly / Labor File No.: 014 Max. allocatable records: 96 A-2-14-2. Work time file File name: Work Time File No.: 019 Max. allocatable records: 4158 File name: Work Time (daily consolidation) File No.: 319 Max. allocatable records: 4158 Min. number ...

  • Casio QT-6600 - page 202

    R-200 File Format A-2-14-3. Time zone file File name: Time zone File No.: 800 Max. allocatable records: 24 Divide one day into some time zones, and assign the length of one cycle per zone. Refer to page 60 of the programming manual for details. A-2-14-4. Employee file File name: Employee File No.: 801 Max. allocatable records: 99 Refer to page 62 o ...

  • Casio QT-6600 - page 203

    R-201 QT-6600 Reference Manual Start time 01 Job code 3 Break time End time Grace before start 5 7 8 9 10 11 Grace after start Grace before end Grace after end A-2-14-6. Schedule file File name: Schedule File No.: 803 Max. allocatable records: 2079 Min. number of files to fix the work time: The number of employee × 7 days × 3 shift Max. allocatab ...

  • Casio QT-6600 - page 204

    R-202 File Format A-2-15. Void table file A-2-15-1 Void table (daily) File name: Void table (daily) File No.: 012 Max. allocatable records: 99 Refer to page 54 of the programming manual for details. A-2-15-2 Void table (periodic/consolidation) File name: Void table (periodic 1) File No.: 112 Max. allocatable records: 99 File name: Void table (perio ...

  • Casio QT-6600 - page 205

    R-203 QT-6600 Reference Manual A-2-17. Grand total file A-2-17-1 Grand total (daily) File name: Grand total (daily) File No.: 020 Max. allocatable records:3 (fixed) A-2-17-2 Grand total (periodic/consolidation) File name: Grand total (periodic 1) File No.: 120 Max. allocatable records: 3 (fixed) File name: Grand total (periodic 2) File No.: 220 Max ...

  • Casio QT-6600 - page 206

    R-204 File Format A-2-18. Customer file A-2-18-1 Customer file File name: Customer file File No.: 037 Max. allocatable records: 4000 A-2-18-2 Customer group file (daily) File name: Customer group (daily) File No.: 042 Max. allocatable records: 20 A-2-18-3 Customer group (periodic/consolidation) File name: Customer group (periodic 1) File No.: 142 M ...

  • Casio QT-6600 - page 207

    R-205 QT-6600 Reference Manual Program 06 A-2-19. General control file A-2-19-1 General control File name: General control File No.: 022 Max. allocatable records: 50(fixed) Rec No. Contents Reference page (PGM manual) 001 Date order , Monetary mode 129 002 (not used) --- 003 Consecutive number 130 004 Rounding, T ax system 130 005 Receipt control ( ...

  • Casio QT-6600 - page 208

    R-206 File Format A-2-21. Report header file A-2-20-1 Report header File name: Report header File No.: 024 Max. allocatable records: 55(fixed) Character 01 6 A-2-20. Special character file A-2-20-1 Special character File name: Special character File No.: 023 Max. allocatable records: 99(fixed) Character 01 6 Refer to page 134 of the programming man ...

  • Casio QT-6600 - page 209

    R-207 QT-6600 Reference Manual A-2-23. Pulldown group file A-2-23-1 Pulldown group File name: Pulldown group File No.: 026 Max. allocatable records: 999 A-2-24. Set menu table file A-2-24-1 Set menu table File name: Set menu table File No.: 028 Max. allocatable records: 999 Record No. 1 Record No. 2 Record No. 3 Record No. 4 Record No. 5 Record No. ...

  • Casio QT-6600 - page 210

    R-208 File Format A-2-25. Batch X/Z file A-2-25-1 Batch X/Z File name: Batch X/Z File No.: 029 Max. allocatable records: 10 Mode Program X/Z code (1) X/Z code (2) X/Z code (3) X/Z code (4) X/Z code (5) X/Z code (6) X/Z code (7) 01 2 3 45 67 89 1 0 X/Z code (8) A-2-26. Receipt / Slip message file A-2-26-1 Receipt / Slip message File name: Receipt / ...

  • Casio QT-6600 - page 211

    R-209 QT-6600 Reference Manual A-2-28. Arrangement file A-2-28-1 Arrangement group (1) ~ (5) File name: Arrangement group (1) File No.: 038 Max. allocatable records: 9999 File name: Arrangement group (2) File No.: 138 Max. allocatable records: 9999 File name: Arrangement group (3) File No.: 238 Max. allocatable records: 9999 File name: Arrangement ...

  • Casio QT-6600 - page 212

    R-210 File Format Order character 0 16 A-2-32. Scheduler file A-2-32-1 Scheduler File name: Scheduler File No.: 062 Max. allocatable records: 99 Start time End time Interval 1 Not used Interval 2 Arrange tbl No. file No. 0 14 245 8 1 2 Refer to page 48 of the programming manual for details. A-2-33. Order character file A-2-33-1 Order character File ...

  • Casio QT-6600 - page 213

    R-211 QT-6600 Reference Manual A-2-36. Check# pop-up window definition file A-2-36-1 Check# pop-up window definition file File name: Check# pop-up window definition File No.: 115 Max. allocatable records: 700(fixed) Check number Key type not used Bitmap link 0 67 3 4 Refer to page 182 of the programming manual for details. A-2-37. Clerk pop-up wind ...

  • Casio QT-6600 - page 214

    R-212 File Format A-2-39. Add on VMP file A-2-39-1 Add on VMP file File name: Add on VMP File No.: 040 Max. allocatable records: 999 Data 05 1 A-2-40. Intelligent EJ file A-2-40-1 Intelligent EJ file File name: Intelligent EJ File No.: 050 Max. allocatable records: 100000 Data 0 101 Character 04 0 A-2-41. Menu title character file A-2-41-1 Menu tit ...

  • Casio QT-6600 - page 215

    R-213 QT-6600 Reference Manual A-2-43. Screen logo file A-2-43-1 Screen logo file File name: Screen logo File No.: 796 Max. allocatable records: 9833 (fixed) Bipmap 0 160 A-2-44. Full screen check window (1) ~ (3) file A-2-44-1 Full screen check window (1) ~ (3) file File name: Full screen check window File No.: 797, 798, 799 Max. allocatable recor ...

  • Casio QT-6600 - page 216

    R-214 File Format A-2-47. Additional PLU character file A-2-47-1 Additional PLU character file File name: Additional PLU character File No.: 941 Max. allocatable records: 9999 PLU code Character PGM 07 31 32 A-2-48. Free function list file A-2-48-1 Free function list file File name: Free function list File No.: 946 Max. allocatable records: 99 Rec- ...

  • Casio QT-6600 - page 217

    R-215 QT-6600 Reference Manual A-2-49. System files A-2-49-1 Key table File name: Key table File No.: 074 Max. allocatable records: 2 (fixed) Func code Rec No. not used 0 24 48 Logical ID IP address Distinct M/BM CHK PGM not used not used Check cluster No. CHK PGM Status 0 12 14 16 18 24 A-2-49-2 Touch screen key table File name: Touch screen key t ...

  • Casio QT-6600 - page 218

    R-216 File Format Terminal No. Time Date Operation Error function Error code 0 24 69 71 1 A-2-49-6 System error log File name: System error log File No.: 999 Max. allocatable records: 999 Program 0 8 Main ECR ID Backup ECR ID Type Main printer No. Backup printer No. 0 11 3 2 5 2627 A-2-49-4 I/O parameter table File name: I/O parameter table File No ...

  • Casio QT-6600 - page 219

    R-217 QT-6600 Reference Manual A-2-49-9 Keyboard color definition File name: Keyboard color definition File No.: 907 Max. allocatable records: 100 Refer to page 71 of the programming manual for details. A-2-49-10 Keyboard color theme File name: Keyboard color theme File No.: 908 Max. allocatable records: 100 Refer to page 70 of the programming manu ...

  • Casio QT-6600 - page 220

    R-218 File Format A-2-49-12 TCP/IP control File name: TCP/IP control File No.: 900 Max. allocatable records: 26 (fixed) Refer to page 71 of the programming manual for details. A-2-49-14 FTP Login Name File name: FTP login name File No.: 911 Max. allocatable records: 10 A-2-49-15 FTP Server Name File name: FTP server name File No.: 912 Max. allocata ...

  • Casio QT-6600 - page 221

    R-219 QT-6600 Reference Manual A-2-49-18 PS2 key table file File name: PS2 key table File No.: 374 Max. allocatable records: 811 (fixed) 0 456 2 Function code Record-# Chara code CAPS Lock A-2-49-19 Key table (full screen) file File name: Key table (full screen) File No.: 795 Max. allocatable records: 240 0 4 2 Function code Location (X1) Location ...

  • Casio QT-6600 - page 222

    R-220 File Format ...

  • Casio QT-6600 - page 223

    R-221 QT-6600 Reference Manual A-3. Counter and T otalizer calculation method ......................................... R-220 A-3-1 Fix ed totaliz er file ........................................................................................ R-220 ...

  • Casio QT-6600 - page 224

    R-222 Calculation method A-3. Counter and Totalizer calculation method The following calculation methods of fixed totalizer memories are explained in this chapter. All formulas in these explanations are calculated in the registration mode. In the REF mode, the values in totalizers are calculated using the opposite sign. In the REG – mode, the val ...

  • Casio QT-6600 - page 225

    R-223 QT-6600 Reference Manual T otal or counter Increments or Decr ements by Number of Refund mode Refund mode amount Customer count A verage sales per customer Check cashing service fee Ne w balance fee Clerk commission total Foreign currency in drawer Reduction Item return amount Clear count Rounding ST transfer void T axable amount T ax amount ...

  • Casio QT-6600 - page 226

    R-224 Calculation method ...

  • Casio QT-6600 - page 227

    R-225 QT-6600 Reference Manual A-4. Err or messages ................................................................................... R-224 A-4-1 Error messages ........................................................................................... R-224 A-4-2 Operation prompt .................................................................. ...

  • Casio QT-6600 - page 228

    R-226 Error messages A-4. Error messages A-4-1 Error messages When an error occurs on a QT-6600 terminal, a buzzer sounds and the appropriate error message appears on the main display, indicating what action to take. The following table lists the error messages and describes the action to take. Prompt message Meaning Action Operator mistake. E001 W ...

  • Casio QT-6600 - page 229

    R-227 QT-6600 Reference Manual Prompt message Meaning Action ********** E061 Printer error. YES:Retry to print. NO :Show on the screen. ESC:Discard data. ********** E062 Printer paper end. ********** E062 Printer paper end. YES:Retry to print. NO :Show on the screen. ESC:Discard data. E064 Printer buffer full. YES:Retry to print. NO :Show on the sc ...

  • Casio QT-6600 - page 230

    R-228 Error messages Prompt message Meaning Action E139 Not allowed to be negative by Minus/Coupon key. E140 Wrong menu. E141 Press <TRAY TTL> twice before finalization. E145 Arrangement syntax error. E150 Incorrect value entry. E151 Incorrect Key Pressed. E152 PGM File or Memory number does not Exist. E164 Employee No. is not Found in the Em ...

  • Casio QT-6600 - page 231

    R-229 QT-6600 Reference Manual A-4-2 Operation prompt All prompt messages, together with descriptors and symbol characters for displaying / printing are contained in the list below. These messages cannot be added, modified or deleted. Prompt messa ge Meaning Data cannot be printed out. Do you want to display? Do you want to clear data? Cancel OK? P ...

  • Casio QT-6600 - page 232

    R-230 Error messages A-4-3 System error code All error codes are contained in the list below. These error codes are displayed or printed on error log report. Err or code Meaning 0010 Handler access error (software) 0011 Cannot execute handler (system conf iguration) 0012 Break by PC 0013 Break by ECR 0014 DSR off before recei ving command packet 00 ...

  • Casio QT-6600 - page 233

    R-231 QT-6600 Reference Manual Error code Meaning 0082 Check tracking backup master is remov ed from system. 0112 Wrong NB/Purge access for INDEX 0128 Parameter error / Maximum length of send error 0130 Error driv e 0134 Network parameter error 0138 Detect error in core system 0140 Parameter error (record length exceeds w or k b uf fer) 0141 EOF ov ...

  • Casio QT-6600 - page 234

    R-232 Error messages ...

  • Casio QT-6600 - page 235

    R-233 QT-6600 Reference Manual Index Inde x .............................................................................................................. R-233 ...

  • Casio QT-6600 - page 236

    R-234 Index A add check R-36, R-180, P-25 add mode P-35 alphabet ke y P-126 amount symbol P-134 arrangement R-33, R-51, R-180, R-209, P-21, P-25, P- 33, P-79, P-151 arrangement control P-85 arro w ke y R-29 Australian GST control P-67 auto program control R-216, P-18, P-65, P-182 B backspace ke y P-127 backup master R-17 barcode R-151 batch X/Z R-2 ...

  • Casio QT-6600 - page 237

    R-235 QT-6600 Reference Manual Euro R-31, R-210, P-22, P-64, P-181 F file concept R-23 finalize ke y R-30 first unit price R-34, R-180, P-25 fix ed totalizer R-24, R-165, R-185, R-222, P-18, P- 39, P-133, P-149 flag clear P-11 flash R-164 flat PLU R-34, R-180, P-25 food stamp status shift R-34, R-180, P-25 food stamp subtotal R-35, R-180, P-25 food ...

  • Casio QT-6600 - page 238

    R-236 Index number of customer R-32, R-180, P-25 numeric key R-29, R-180 O OBR R-36, R-180, P-25 old check R-36, R-180, P-25 online P-55 open R-34, R-180, P-25 open check R-37, R-146, R-171, R-180, P-25 open2 R-34, R-180, P-25 operation prompt R-229 operator number R-35, R-180, P-25 operator read / reset R-34, R-180, P-25 order character R-210, P-2 ...

  • Casio QT-6600 - page 239

    R-237 QT-6600 Reference Manual status icons R-12 stock R-168 stock inquiry R-30, R-180, P-25 store R-37, R-46, R-180, P-25 subdepartment R-37, R-168, R-180, R-186, P-18, P- 25, P-129, P-141, P-142, P-147, P-148, P-198 subdepartment feature P-90 subdepartment number R-37, R-180, P-25 subdepartment totalizer R-24 substitution R-36, R-142, R-180, P-25 ...

  • Casio QT-6600 - page 240

    CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuy a-ku, T oky o 151-8543, J apan MA0811-A Printed in Japan QT-6600REF*E c ...

Manufacturer Casio Category Car Video System

Documents that we receive from a manufacturer of a Casio QT-6600 can be divided into several groups. They are, among others:
- Casio technical drawings
- QT-6600 manuals
- Casio product data sheets
- information booklets
- or energy labels Casio QT-6600
All of them are important, but the most important information from the point of view of use of the device are in the user manual Casio QT-6600.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Casio QT-6600, service manual, brief instructions and user manuals Casio QT-6600. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Casio QT-6600.

Similar manuals

A complete manual for the device Casio QT-6600, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Casio QT-6600 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Casio QT-6600.

A complete Casio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Casio QT-6600 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Casio QT-6600, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Casio QT-6600, that we can find in the current document
3. Tips how to use the basic functions of the device Casio QT-6600 - which should help us in our first steps of using Casio QT-6600
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Casio QT-6600
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Casio QT-6600 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Casio QT-6600?

Use the form below

If you did not solve your problem by using a manual Casio QT-6600, ask a question using the form below. If a user had a similar problem with Casio QT-6600 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)