English dropdown-ico

Manual Snapper 1694496

16 pages 0.44 mb
Download

Go to site of 16

Summary
  • Snapper 1694496 - page 1

    A TT A CHMENT OPERA T OR’S MANU AL Mfg. No. Description 1694496 Turbo Vacuum Collection System (for use with Legacy XL / 2000 / 2900 Series) 1726315-02 Rev 01/2007 TP 100-3922-02-AT-SMA T urbo V acuum System For 48” Mo wer Dec ks ...

  • Snapper 1694496 - page 2

    ...

  • Snapper 1694496 - page 3

    1 Attaching & Remo ving the T urbo Attaching the T urbo..........................................7 Removing the T urbo ........................................7 Adjustments .....................................................8 Storage ............................................................8 F ront Br ack et Hole T emplate ................ ...

  • Snapper 1694496 - page 4

    2 Read and obey all operation and warning decals. ROT A TING BLADES SHUT OFF MOWER AND TRACTOR BEFORE SERVICING OR CLEANING BLOWER AND MOWER. D ANGER 1700259 • This shield must be in place at all times during operation. • Mower deflector must be in down position when blower is removed. 1717291 W ARNING Safety Rules & Information Read these ...

  • Snapper 1694496 - page 5

    3 BEFORE OPERA TION Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Check grass condition. If wet, wait until later in the day. If grass is wet, as the grass catcher is likely to become plugged. For efficient grass collection, air circulation under the mower deck, through the chute and ...

  • Snapper 1694496 - page 6

    4 Initial Setup & Assembly Figure 2. Assemble the New Cover A. Belt Cover E. Hinge B. Knob F. Screw, #10-32 x 3/8 C. Left Hand Cover G. 5/16 Push nut D. Locknut, #10-32 G Figure 1. Deflector, Stone Guard, and Cover A. Deflector C. Belt Cover B. Stone Guard A B C INITIAL SETUP & ASSEMBL Y Prepare the Deck, Belt Co ver , & Support Arm Ass ...

  • Snapper 1694496 - page 7

    5 Initial Setup & Assembly Assemble & Install Deflector 1. The two holes for mounting the deflector must be drilled out. Turn the deflector over, and notice that these two holes are started. Finishing drilling the two 11/32 inch holes (See Figure 4). 2. See Figure 4. Connect the deflector (A) to the deflec- tor brackets (O) with two 5/16-18 ...

  • Snapper 1694496 - page 8

    6 Initial Setup & Assembly Assemble T urbo 1. Assemble the turbo. Install the bracket (A, Figure 5) and upstop (B) as follows: NOTE: Upstop (B. Figure 5) has short and long leg. The difference is the thickness of bracket (A). Place long leg on housing and short leg on top of bracket. Washer(s) may need to be added under each leg of upstop if de ...

  • Snapper 1694496 - page 9

    7 Attaching & Removing the T urbo W ARNING To operate without the collection system, the blower assembly MUST be removed and the deflector MUST be in the down position. The deflector is spring loaded. when attaching or removing the blower, hold the deflector up; then allow the deflector to go down into the normal operating position. W ARNING Th ...

  • Snapper 1694496 - page 10

    8 ADJUSTMENTS Pulley Adjustments If the mower deck belt has stretched over time, the stacked idler pulley (B, Figure 10) may need to be moved to the outer hole in the mower deck to take up the belt slack. If the mower idler pulley (B) is mounted in the outer hole in the deck, then the turbo idler pulley (C) should be as far toward the front as the ...

  • Snapper 1694496 - page 11

    9 Front Bracket Hole T emplate Line up Square Hole on Template to square Hole of Deck Line up “Edge of Mower” Line on Template to Edge of Mower Mark and Drill Two 13/32” Holes Line Up With Edge of Mower Line Up With Existing Square Hole ...

  • Snapper 1694496 - page 12

    ...

  • Snapper 1694496 - page 13

    ...

  • Snapper 1694496 - page 14

    ...

  • Snapper 1694496 - page 15

    ...

  • Snapper 1694496 - page 16

    Briggs & Stratton Yard Power Products Group Copyright © 2007 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved MANUFACTURING, INC. Simplicity Mfg. Inc. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.SimplicityMfg.com ...

Manufacturer Snapper Category Vacuum Cleaner

Documents that we receive from a manufacturer of a Snapper 1694496 can be divided into several groups. They are, among others:
- Snapper technical drawings
- 1694496 manuals
- Snapper product data sheets
- information booklets
- or energy labels Snapper 1694496
All of them are important, but the most important information from the point of view of use of the device are in the user manual Snapper 1694496.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Snapper 1694496, service manual, brief instructions and user manuals Snapper 1694496. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Snapper 1694496.

Similar manuals

A complete manual for the device Snapper 1694496, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Snapper 1694496 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Snapper 1694496.

A complete Snapper manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Snapper 1694496 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Snapper 1694496, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Snapper 1694496, that we can find in the current document
3. Tips how to use the basic functions of the device Snapper 1694496 - which should help us in our first steps of using Snapper 1694496
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Snapper 1694496
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Snapper 1694496 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Snapper 1694496?

Use the form below

If you did not solve your problem by using a manual Snapper 1694496, ask a question using the form below. If a user had a similar problem with Snapper 1694496 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)