English dropdown-ico

Manual Jasco GE 19209

9 pages 0.79 mb
Download

Go to site of 9

Summary
  • Jasco GE 19209 - page 1

    GE Model 19209 www.jascoproducts.com Wireless Door Chime Kit Installation Instructions for Battery Operated Wireless Door Chime Kit Required Tools: Small flat blade screwdr iver, drill, drill bit, and phillips screwdriver. Included Hardware: (2) Plastic screw anchors (2) 4x20mm screws (for anchors) (2) 3x20mm screws (2) Double sided adhesive pads T ...

  • Jasco GE 19209 - page 2

    button. 1. Remove the battery from the push button transmitter. 2. Locate the 9 position jumper shown below. 9 position jumper (This pushbutton is set for Ding Dong Chime since 7=off, 8=on, and 9=off.) 3. Select the desired chime sound from the table below. Chime Sound Table Position 7 8 9 Westminster ON OFF OFF Ding Dong OFF ON OFF Knock OFF OFF O ...

  • Jasco GE 19209 - page 3

    Parking the jumper on an open set of pins. The two jumpers on the left are in the parked position. Setting The House Security Code Each chime component has jumpers fo r setting the house security code. In most cases you will not need to change the factory settings for the security code. If your chime activates in termittently or does not work at al ...

  • Jasco GE 19209 - page 4

    The chime and pushbutton must be set to the same house security code for the combination to operate together. Note : The push button has 3 additional jum pers that are used to set the chime tune that will play. The chim e tune jumpers do not affect the house security code. 1. Remove power or batte ries from the chime. 2. To remove the batteries fro ...

  • Jasco GE 19209 - page 5

    Push Button Jumpers Chime Jumpers 5. Jumpers 1-6 are used to select 1 of 64 possible home security codes. 6. To change the house code, add or remove jumpers as needed. It is recommended to change only one jumper at a time and then test the system for proper operation. Positions 1-6 on the chime and pushbutton must match exactly. Push Button Mountin ...

  • Jasco GE 19209 - page 6

    b. Replacing the back cover 1. Push buttons are typically mounted at the same height as the door knob or handle (between 36" and 44" above the floor). 2. Before mounting, choose a mounting location that is not farther than 150 feet from the chim e unit location. Not farther than 150 feet Place push button where you would lik e to mount an ...

  • Jasco GE 19209 - page 7

    3. Use back cover of push button as a template to mark two screw holes. 4. Drill two holes with 3/32” drill in marked locations. 5. Secure back cover to the mountin g surface with two supplied mounting screws. 6. Press front housin g onto back cover. 7. Test Operations, if chime does not work, see TROUBLESHOOTING. Chime Unit Mounting Instructions ...

  • Jasco GE 19209 - page 8

    6. Place the chime unit’s keyhole sl ots over the screw s and press down on the chime unit to secure it. Operation 1. Slide power switch to “O n” to turn on the chime. 2. Gently press transmitter button to sound chime. ...

  • Jasco GE 19209 - page 9

    Troubleshooting Chime doesn't work: 1. Make sure push button switch is depressed and held for at least 1 second. 2. Make sure plastic tag is removed from battery. 3. Make sure house code switches 1-6 on chime and push button match exactly. 4. Verify battery orientation in push button. 5. Try fresh batteries. 6. Make sure chime is not farther t ...

Manufacturer Jasco Category Door

Documents that we receive from a manufacturer of a Jasco GE 19209 can be divided into several groups. They are, among others:
- Jasco technical drawings
- GE 19209 manuals
- Jasco product data sheets
- information booklets
- or energy labels Jasco GE 19209
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jasco GE 19209.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jasco GE 19209, service manual, brief instructions and user manuals Jasco GE 19209. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jasco GE 19209.

Similar manuals

A complete manual for the device Jasco GE 19209, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jasco GE 19209 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jasco GE 19209.

A complete Jasco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jasco GE 19209 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jasco GE 19209, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jasco GE 19209, that we can find in the current document
3. Tips how to use the basic functions of the device Jasco GE 19209 - which should help us in our first steps of using Jasco GE 19209
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jasco GE 19209
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jasco GE 19209 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jasco GE 19209?

Use the form below

If you did not solve your problem by using a manual Jasco GE 19209, ask a question using the form below. If a user had a similar problem with Jasco GE 19209 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)