Manual Ultra Start MCS-100

8 pages 0.46 mb

Go to site of 8

  • Ultra Start MCS-100 - page 1

    Inst allation Manual                                                              !   !  "   # $ % MCS-100 Remot e Contr ...

  • Ultra Start MCS-100 - page 2

    MCS-100 2 Version A SECTION 1 : SYSTEM LAY OUT SECTION 2 : SYSTEM CONNECTI ON Diagram # 1: Tilt Switc h or External Sensor Connec tion You can connect any external trigger devices. Mak e sure negative trigger output of external device is connected to Negative Trigger Input W ire (Green #4). Diagram # 2: LED Connection 1. Locate a stock replacem ent ...

  • Ultra Start MCS-100 - page 3

    MCS-100 3 Version A 2. Use 30/40 Am p SPDT relay to connec t as shown. Connect the Starter Interrupt output (Orange) wire to pin 86 of the relay . Connect pin 30 of the relay to the Motor side of the Starter wire. Connect pin 87a of the relay to the switch side of the Starter wire. 3. Locate the Ignition wi re. 4. Connect the Switched igniti on (ye ...

  • Ultra Start MCS-100 - page 4

    MCS-100 4 Version A SECTION 3 : SYSTEM OP ERA TION The MCS-100 is very sophistic ated, but the operation is sim ple. Your two button RF transm itter is easy to use f or arm , disarm , personal protection, and program ming the system f or many custom functions. 3.1 Remote System A rm (O n)  Press and release RF tr ansmitter button #1.  One sir ...

  • Ultra Start MCS-100 - page 5

    MCS-100 5 Version A Shock Sensor Disable Shock Sensor Enable (4.6) Turn ignition on. W ithin 10 seconds , press button #1, #2, #3, #1 in succession. (#3=#1+#2) 1 2 1 2 Valet Mode On Valet Mode Off (4.7) Turn Ignition on. W ithin 10 seconds, press button #2, #3, #2, #3 in succession. (#3=#1+#2) 1 2 1 2 Audible W arning Sound Off Audible W arning Sou ...

  • Ultra Start MCS-100 - page 6

    MCS-100 6 Version A 4.4 Emergency Disarm The em ergency disarm is ac tivated through the ignition key s witch and m eans that the system can be disarm ed without rem ote. To activate the EMERGENCY DISARM:  While the sys tem is triggered, turn the ignition key on and off four (4) times within ten (10) seconds.  The operation is confirmed with ...

  • Ultra Start MCS-100 - page 7

    MCS-100 7 Version A 4.7 Valet Mo de The Valet Mode is activated thr ough the igniti on k ey switch and m eans that all normal system f unctions are turned off . This feature is usef ul when v alet park ing, refueling, or servicing y our m otorcycle. To activate the VALET MODE:  Turn the ignition key to the on position.  Within ten (10) sec on ...

  • Ultra Start MCS-100 - page 8

    MCS-100 8 Version A 1. Turn the ignition key to the on position. 2. Within ten (10) sec onds PRESS BUTTONS #1, #3, #1, #3 in succession. (#3=#1+#2) 3. The operation is confirmed with one chirp sound and one parking light flash. 4. Press button #1 of your trans mitter to increase the shock s ensor sensitivity. 5. If y ou want to incr ease more than ...

Manufacturer Ultra Start Category Motorcycle Accessories

Documents that we receive from a manufacturer of a Ultra Start MCS-100 can be divided into several groups. They are, among others:
- Ultra Start technical drawings
- MCS-100 manuals
- Ultra Start product data sheets
- information booklets
- or energy labels Ultra Start MCS-100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Ultra Start MCS-100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Ultra Start MCS-100, service manual, brief instructions and user manuals Ultra Start MCS-100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Ultra Start MCS-100.

A complete manual for the device Ultra Start MCS-100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Ultra Start MCS-100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Ultra Start MCS-100.

A complete Ultra Start manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Ultra Start MCS-100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Ultra Start MCS-100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Ultra Start MCS-100, that we can find in the current document
3. Tips how to use the basic functions of the device Ultra Start MCS-100 - which should help us in our first steps of using Ultra Start MCS-100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Ultra Start MCS-100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Ultra Start MCS-100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Ultra Start MCS-100?

Use the form below

If you did not solve your problem by using a manual Ultra Start MCS-100, ask a question using the form below. If a user had a similar problem with Ultra Start MCS-100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)