Manual Jensen JN102

11 pages 0.41 mb
Download

Go to site of 11

Summary
  • Jensen JN102 - page 1

    Installation Guide JN102 DVD PLA YER WITH DROP-DOWN VIDEO MONITOR SOUR CE ® ...

  • Jensen JN102 - page 2

    Important Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play , the LCD panel or video mon ...

  • Jensen JN102 - page 3

    ...

  • Jensen JN102 - page 4

    GENERAL INST ALLA TION APPROACH: 1) Decide upon system configuration and options that will be installed (i.e.: what components, VCP , Video Game, external amp, wireless headphones, VCP , etc.). 2) Review all manuals to become familiar with electrical requirements and hook ups. 3) Decide upon mounting locations of all components and method of mounti ...

  • Jensen JN102 - page 5

    VEHICLE PREP ARA TION: 1) Locate an accessory power source (+12v when key is in the ACC. and run positions, and 0v when key is off), and also a good ground generally , these wires can be found at the ignition switch or fuse-box. 2) The mounting method and location will vary from vehicle to vehicle, so this manual will only focus on the installation ...

  • Jensen JN102 - page 6

    MINI CONSOLE INST ALLA TION: This page only covers special installation considerations for the mini-console installation. If the video monitor is to be installed in a vehicle with the mini console, this console may need to be trimmed to fit the contour of the vehicle headliner . 1) In this installation, the video monitor is mounted directly to the ...

  • Jensen JN102 - page 7

    -5- MOUNTING THE MINI-CONSOLE Ro of Ro of Su pport Head l iner 12” x9” x3/4” Plyw ood Block (4) Self - T a p ping Screws (not s uppli ed) Min i-Co nsol e Vide o Uni t (5) #8 Flat W ash ers (5) #8x3/4” Sel f- T a pping Scre ws ...

  • Jensen JN102 - page 8

    -6- JN102 Figure A 1) Make the connections to the vehicle for the 12 pin wiring harness. 2) Insert the Circular Mini-Din Connector of the source component harness through the wire tie loop on the main PCB and into the Mini-Din Connector on the main PCB. 3) Pull the wire tie loop tight and cut off the excess. 4) Connect the 12 pin harness to the mat ...

  • Jensen JN102 - page 9

    Positive Switched Dome lighting -7- CONNECTING THE DOME LIGHTS The dome lights in the video monitor require three connections to the vehicle's wiring. There are two common types of dome light circuits used, positive or negative switched. Positive systems supply voltage to the interior lights to turn them on, negative switched systems apply gro ...

  • Jensen JN102 - page 10

    T roubleshooting: SYMPTOM: No power at Video Monitor Power but no video or sound Picture, but no sound Static on TV Stations (T uner V ersion Only) No Infrared remote func- tions for VCP (or other com- ponents) REMEDY : -V erify +12 VDC on Red wire at 2 pin Power Harness behind video monitor . V erify ground connection with continuity test from kno ...

  • Jensen JN102 - page 11

    © Copyright 200 6 Audiovox Electronics Corp. 150 Marcus Blvd. Hauppauge, NY 1 1788 128-7390 B A WWW .audiov ox.com For Customer Servi ce Vi si t O ur W ebsite At Produc t Informa tion, P ho tos, F AQ’s Ow ner ’s Ma nu al s ...

Manufacturer Jensen Category DVD Player

Documents that we receive from a manufacturer of a Jensen JN102 can be divided into several groups. They are, among others:
- Jensen technical drawings
- JN102 manuals
- Jensen product data sheets
- information booklets
- or energy labels Jensen JN102
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jensen JN102.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jensen JN102, service manual, brief instructions and user manuals Jensen JN102. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jensen JN102.

Similar manuals

A complete manual for the device Jensen JN102, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jensen JN102 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jensen JN102.

A complete Jensen manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jensen JN102 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jensen JN102, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jensen JN102, that we can find in the current document
3. Tips how to use the basic functions of the device Jensen JN102 - which should help us in our first steps of using Jensen JN102
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jensen JN102
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jensen JN102 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jensen JN102?

Use the form below

If you did not solve your problem by using a manual Jensen JN102, ask a question using the form below. If a user had a similar problem with Jensen JN102 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)