Manual Microsoft PRO 906EX

298 pages 7.16 mb
Download

Go to site of 298

Summary
  • Microsoft PRO 906EX - page 1

    Operating Instructions General Settings Guide Read this manual carefully before yo u use this machi ne and keep it h andy for future reference. For safe and corre ct use, be sur e to rea d the Safety Informatio n in "About This Machi ne" before using the ma chine. Connecting the Machine System Settings Tray Paper Settings Copier/Document ...

  • Microsoft PRO 906EX - page 2

    Introduction This manual contains detailed instructions and note s on th e operation and use of this ma chine. For your safety and benefit, read this manual carefully be fo re using the machine. Kee p this manual in a handy place for quick reference. Important Contents of this manual are subject to change witho ut prior notice. In no event wil l th ...

  • Microsoft PRO 906EX - page 3

    i Manuals for This Machine Refer to the manuals that are relevant to what y ou want to do w ith the machine. ❖ About This Machine Be sure to read the Safety Informatio n in this manual before using the ma- chine. This manual provides an introductio n to the functions of the mac hine. It also explains the control panel , preparation procedures for ...

  • Microsoft PRO 906EX - page 4

    ii ❖ Other manuals • PostScript3 Supplement •U N I X S u p p l e m e n t • Manuals for DeskTopBinder Li te • DeskTopBinder Lite Setup Guide • DeskTopBinder Introduction Guide •A u t o D o c u m e n t L i n k G u i d e Note ❒ Manuals provided are specific to machin e types. For details, refer to the ap- pendix in Abou t This Machine ...

  • Microsoft PRO 906EX - page 5

    iii TABLE OF CONTENTS Manuals for This Machine .............................................. ........................................ i How to Read This Manual .............................................. ....................................... 1 Symbols ........... .............. .............. .............. .............. .............. ..... ...

  • Microsoft PRO 906EX - page 6

    iv 3. Tray Paper Settings Tray Paper Settings ................................... ..................................................... ..... 89 Changing Tray Paper Settings ................ .............. ................. .............. .............. ...... 89 Quitting Tray Paper Settings .. ...................................................... ...

  • Microsoft PRO 906EX - page 7

    v 7. Registering Addresses and Users for Scanner Functions Address Book............................................................................ ......................... 179 Managing names in the Address Book ...... .............. ................. ................ ............. 182 Sending e-mail by Quick Dial ..................... ........... ...

  • Microsoft PRO 906EX - page 8

    vi 9. Appendix Adjustment Settings for Operators ............................................................... ... 241 Changing the Adjustment Settings for Operat ors ........................ .............. ............. 241 Setting Values ............. ................. .............. .............. .............. .............. .............. . ...

  • Microsoft PRO 906EX - page 9

    1 How to Read This Manual Symbols This manual uses the foll owing symbols: Indicates important sa fety notes. Ignoring these notes could resu l t i n s e r i o u s i n j u r y o r d e a t h . B e s u r e t o r e a d t h e s e notes. They can be found in the "Safety Information" section of About This Ma- chine. Indicates important sa fety ...

  • Microsoft PRO 906EX - page 10

    2 Display The display panel shows machine status , error messages, and function menus. The function item s displayed serve as selector keys. You can select or specify an item by lightly pressi ng them. When you select or specify an item on the display panel, it is highlighted like . Keys appearing as cannot be used. Important ❒ A force or impact ...

  • Microsoft PRO 906EX - page 11

    3 Accessing User Tools (System Settings) This section is f or Administrato rs in charge of this machine. User Tools allo w you to change or set defaults . Note ❒ Operations for system settings differ from normal operations. Always quit User Tools when you have finished. ❒ A n y c h a n g e s y o u m a k e w i t h U s e r T o o l s r e m a i n i ...

  • Microsoft PRO 906EX - page 12

    4 D Change settings by following instructions on the display, and then press [ OK ] . Note ❒ To ca n ce l c h an g es ma d e t o se tt i ng s a n d return to the in itial display, press the { User Tools } key. Reference p.43 “System Settings” p.113 “Copier/Document Server Features” p.157 “Printer Features” p.173 “Scanner Features” ...

  • Microsoft PRO 906EX - page 13

    5 Displaying Counter This section descri bes how to display Cou nter. A Press the { Counter } key. Note ❒ You can quit dis playing Co unter by pressing th e { Counter } key again. About Menu Protect Using Menu Protect, you can limit the se ttings available to users other than the administrator. In the following User To ols menus, you can specify ...

  • Microsoft PRO 906EX - page 14

    6 ...

  • Microsoft PRO 906EX - page 15

    7 1. Connecting the Machine Connect the machine to the network to configure network environment. Connecting to the Interfaces This section explain s how to check the machine’s inter face, connect th e machine according to the network environment, and specify the networ k settings. 1. IEEE 1394 ports (optional) Ports for connecting the IEEE 1394 i ...

  • Microsoft PRO 906EX - page 16

    Connecting the Machine 8 1 Connecting to the Ethernet Interface Connect 10BASE-T or 100BASE-TX cable to the Ethernet interface. Important ❒ If the main power switch is turned "On", turn it "Off". A Make sure the main power swit ch on the machine is "Off". B Connect the Ethernet interface ca ble to the 10BASE-T/100BAS ...

  • Microsoft PRO 906EX - page 17

    Connecting to the Interfaces 9 1 Connecting with the USB Interface Make the connect ion with the US B 2.0 interface. A Connect the USB 2.0 interface cable to the USB2.0 port. B Connect the other end to the USB port on the host computer. Note ❒ Purchase a USB cable separately according to a personal computer i n use. ❒ The USB 2.0 interface boar ...

  • Microsoft PRO 906EX - page 18

    Connecting the Machine 10 1 Connecting to the I EEE 1394 Interface Connect the IEEE 1394 interf ace cable to the IEEE 1394 interface board (optional). A Connect the IEEE 1394 interface cable to the IEEE 1394 port. B For IEEE 1394 (SCSI print) connection, plug the other end of the cable into the interface connector on the host computer. Make sure ab ...

  • Microsoft PRO 906EX - page 19

    Connecting to the Interfaces 11 1 Connecting to the I EEE 1284 Interface Connect the IEEE 1284 interf ace cable to the IEEE 1284 interface board (optional). A Make sure the main power swit ch on the machine is "Off". If the main power switch is turned "On", turn it "Off". B Turn off the main power switch of the host co ...

  • Microsoft PRO 906EX - page 20

    Connecting the Machine 12 1 Connecting to the IEEE 802.11b (Wireless LAN) Interface Connecting to the IEEE 802.11 b (wireless LAN) interface. Note ❒ Check the setting of IPv4 address and subnet mask of this machi ne. ❒ For how to set IPv4 address and subnet mask from the contro l panel of the machine, see "Interface Settings." Referen ...

  • Microsoft PRO 906EX - page 21

    Connecting to the Interfaces 13 1 Note ❒ Select [ 802.11 Ad-hoc ] mode when connecting Windows XP as a wireless LAN client using Windows XP standard driver or utilities, or when not using the infrastructure mode. ❒ For details about how to make settings of wir eless LAN from the control pan- el on the machine, see "IEEE 802.11b". ❒ ...

  • Microsoft PRO 906EX - page 22

    Connecting the Machine 14 1 ❖ When using in ad-hoc mode / 802.11 ad-hoc mode 1. If the IEEE 802.11b interface unit is working, it is lit in orange. 2. If it is connected properly to the netw ork, the LED is green when in ad-hoc mode or 802.11 ad-hoc mode. If the LED is blinking, the machine is searching for devices. The LED will light after a few ...

  • Microsoft PRO 906EX - page 23

    Network Settings 15 1 Network Settings This section describes the network sett ings you can change with User Tools (Sys- tem Settings). Make settings acco rding to functions you w ant to use and the in- terface to be connected. Important ❒ These settings sho uld be made by the systems administrator, or after consult- ing with the systems administ ...

  • Microsoft PRO 906EX - page 24

    Connecting the Machine 16 1 Note ❒ IPv6 can be used only for the printer function. ❒ In [ Effective Protocol ] , check that the protocol you want t o use is set to [ Active ] . ❒ [ LAN Type ] is displayed when optio nal wire less LAN board is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected in- terface h ...

  • Microsoft PRO 906EX - page 25

    Network Settings 17 1 IEEE 802.11b (wireless LAN) This section describes necessary set it ems for using Printer wit h IEEE 802.11b (wireless LAN). For details about specifying the settings, s ee "Interface Settings" and "File Transfer". Heading Setting Item Setting Requirements interface settings/Network Ma c hi ne I Pv 4 Ad d r ...

  • Microsoft PRO 906EX - page 26

    Connecting the Machine 18 1 Note ❒ As to [ Effective Protocol ] , check if the protocol to use is set as [ Active ] . ❒ [ IEEE 802.11b ] and [ LAN Type ] are displayed when optional wireless LAN inter- face board is installed. If both Ethe rnet and wireless LAN (IEEE 802.11b) are connected, the selected in terface ta kes precedence. Reference p ...

  • Microsoft PRO 906EX - page 27

    Network Settings 19 1 Note ❒ As to [ Effective Protocol ] , check if the protocol to use is set as [ Active ] . ❒ [ LAN Type ] is displayed when optional wi reless LAN inte rface board is in- stalled. If both ethernet and wirele ss LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒ When setting [ POP before SMTP ] to ...

  • Microsoft PRO 906EX - page 28

    Connecting the Machine 20 1 Note ❒ [ IEEE 1394 ] is displayed when optional I EEE 1394 interface b oard is installed. ❒ As to [ Effective Protocol ] , check if the protocol to use is set as [ Active ] . ❒ When setting [ POP before SMTP ] to [ On ] , also make s etting fo r [ Reception Proto- col ] and [ POP3/IMAP4 Settings ] . ❒ When settin ...

  • Microsoft PRO 906EX - page 29

    Network Settings 21 1 Note ❒ As to [ Effective Protocol ] , check if the protocol to use is set as [ Active ] . ❒ [ LAN Type ] is display ed when option al wireless LAN interface board is in- stalled. If both ethernet and wirele ss LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒ When setting [ POP before SMTP ] to ...

  • Microsoft PRO 906EX - page 30

    Connecting the Machine 22 1 Settings Required to Use Scan t o Folder Function This secti on describes nece ssary set i tems for sending f ile. Ethernet This secti on describes necess ary set items for sending file with ethernet cable . For details about specifying the settings, s ee "Interface Settings" and "File Transfer". Note ...

  • Microsoft PRO 906EX - page 31

    Network Settings 23 1 IEEE 1394 (IPv4 over 1394) This section describes necessary set i tem s for sending file with IEEE 1394 inter- face cable. For details about specifying the settings, s ee "Interface Settings" and "File Transfer". Note ❒ [ IEEE 1394 ] is displayed when optional I EEE 1394 interface b oard is installed. ❒ ...

  • Microsoft PRO 906EX - page 32

    Connecting the Machine 24 1 IEEE 802.11b (wireless LAN) This section describes necessary set items for sending file with IEEE 802.11b (wireless LAN). For details about specifying the settings, s ee "Interface Settings" and "File Transfer". Note ❒ As to [ Effective Protocol ] , check if the protocol to use is set as [ Active ] ...

  • Microsoft PRO 906EX - page 33

    Network Settings 25 1 Settings Required to Use th e Network Delivery Scanner This secti on describes necess ary set items for delivering data t o network. Ethernet This section describes nece ssary set item s for delivering data to network with ethernet cable. For details about specifying the settings, s ee "Interface Settings" and " ...

  • Microsoft PRO 906EX - page 34

    Connecting the Machine 26 1 IEEE 1394 (IPv4 over 1394) This section describes nece ssary set item s for delivering data to network with IEEE 1394 interface cable. For details about specifying the settings, s ee "Interface Settings" and "File Transfer". Note ❒ [ IEEE 1394 ] is displayed when optional I EEE 1394 interface b oard ...

  • Microsoft PRO 906EX - page 35

    Network Settings 27 1 IEEE 802.11b (wireless LAN) This section describes nece ssary set item s for delivering data to network with IEEE 802.11b (wireless LAN). For details about specifying the settings, s ee "Interface Settings" and "File Transfer". Note ❒ As to [ Effective Protocol ] , check if the protocol to use is set as [ ...

  • Microsoft PRO 906EX - page 36

    Connecting the Machine 28 1 Settings Required to Use Network TWAIN Scanner This section describes necessary set it ems for using T WAIN Scanner under the network environment. Ethernet This section describes necessary set items for using network TWAIN Scanner with Ethernet cable. For details about specifying the settings, s ee "Interface Settin ...

  • Microsoft PRO 906EX - page 37

    Network Settings 29 1 IEEE 1394 (IPv4 over 1394) This section describes necessary set items for using network TWAIN Scanner with IEEE 1394 interface cable. For details about specifying the settings, s ee "Interface Settings" and "File Transfer". Note ❒ [ IEEE 1394 ] is displayed when optional I EEE 1394 interface b oard is ins ...

  • Microsoft PRO 906EX - page 38

    Connecting the Machine 30 1 IEEE 802.11b (wireless LAN) This section describes necessary set items for using network TWAIN Scanner with IEEE 802.11b (wireless LAN). For details about specifying the settings, s ee "Interface Settings" and "File Transfer". Note ❒ As to [ Effective Protocol ] , check if the protocol to use is set ...

  • Microsoft PRO 906EX - page 39

    Network Settings 31 1 Settings Required to Use Document Server This section describes necessary set it ems for using Document Server f unction under the network env ironment. Ethernet This section describes necessary set it ems for using Document Server f unction with Ethernet cable. For details about specifying the settings, s ee "Interface S ...

  • Microsoft PRO 906EX - page 40

    Connecting the Machine 32 1 IEEE 1394 (IPv4 over 1394) This section describes necessary set it ems for using Document Server f unction with IEEE 1394 interface cable. For details about specifying the settings, s ee "Interface Settings" and "File Transfer". Note ❒ [ IEEE 1394 ] is displayed when optional I EEE 1394 interface b ...

  • Microsoft PRO 906EX - page 41

    Network Settings 33 1 Note ❒ As to [ Effective Protocol ] , check if the protocol to use is set as [ Active ] . ❒ [ IEEE 802.11b ] and [ LAN Type ] are displayed when optional wireless LAN inter- face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface ta kes precedence. Reference p.52 ? ...

  • Microsoft PRO 906EX - page 42

    Connecting the Machine 34 1 Interface Settings Change set values of [ Interface Settings ] in [ System Settings ] of this machine by us- ing Web Image Monitor, SmartD eviceMonitor for Admin, and teln et. ❖ [ Network ] → [ Machine IPv4 Address ] → [ Auto-Obtain (DHCP) ] • Web Image Monitor:Can be used for specifying the setting. • SmartDev ...

  • Microsoft PRO 906EX - page 43

    Network Settings 35 1 ❖ [ Network ] → [ DNS Configuration ] → [ Specify ] → [ DNS Server1-3 ] • Web Image Monitor:Can be used for specifying the setting. • SmartDeviceMonitor for Admin:Cannot be used for specif ying the setting. • telnet:Can be used for specifying the setting. ❖ [ Network ] → [ DDNS Configuration ] • Web Image M ...

  • Microsoft PRO 906EX - page 44

    Connecting the Machine 36 1 ❖ [ Network ] → [ Effective Protocol ] → [ NetWare ] • Web Image Monitor:Can be used for specifying the setting. • SmartDeviceMonitor for Admin:You can make the IPX/SPX setti ngs if SmartDeviceMonitor for Admin is communicating with the machi ne using TCP/IP. • telnet:Can be used for specifying the setting. ? ...

  • Microsoft PRO 906EX - page 45

    Network Settings 37 1 ❖ [ Network ] → [ NW Frame Type ] → [ Ethernet SNAP ] • Web Image Monitor:Can be used for specifying the setting. • SmartDeviceMonitor for Admin:Cannot be used for specif ying the setting. • telnet:Can be used for specifying the setting. ❖ [ Network ] → [ SMB Comput er Name ] • Web Image Monitor:Can be used f ...

  • Microsoft PRO 906EX - page 46

    Connecting the Machine 38 1 ❖ [ Network ] → [ Host Name ] • Web Image Monitor:Can be used for specifying the setting. • SmartDeviceMonitor for Admin:C an be used for specifying the setting. • telnet:Can be used for specifying the setting. ❖ [ Network ] → [ Machine Name ] • Web Image Monitor:Can be used for specifying the setting. ? ...

  • Microsoft PRO 906EX - page 47

    Network Settings 39 1 ❖ [ IEEE 1394 ] → [ WINS Configuration ] → [ Scope ID ] • Web Image Monitor:Can be used for specifying the setting. • SmartDeviceMonitor for Admin:Cannot be used for specif ying the setting. • telnet:Can be used for specifying the setting. ❖ [ IEEE 1394 ] → [ Host Name ] • Web Image Monitor:Can be used for sp ...

  • Microsoft PRO 906EX - page 48

    Connecting the Machine 40 1 ❖ [ File Transfer ] → [ Delivery Option ] • Web Image Monitor:Can be used for specifying the setting. • SmartDeviceMonitor for Admin:Cannot be used for specif ying the setting. • telnet:Cannot be used for specifyi ng the setting. ❖ [ File Transfer ] → [ SMTP Server ] → [ Server Name ] • Web Image Monito ...

  • Microsoft PRO 906EX - page 49

    Network Settings 41 1 ❖ [ File Transfer ] → [ Administrator's E-mail Address ] • Web Image Monitor:Can be used for specifying the setting. • SmartDeviceMonitor for Admin:Cannot be used for specif ying the setting. • telnet:Cannot be used for specifyi ng the setting. ❖ [ File Transfer ] → [ E-mail Communication Port ] • Web Imag ...

  • Microsoft PRO 906EX - page 50

    Connecting the Machine 42 1 ❖ [ File Transfer ] → [ Default User Name/Password (Send) ] → [ FTP Password ] • Web Image Monitor:Can be used for specifying the setting. • SmartDeviceMonitor for Admin:Cannot be used for specif ying the setting. • telnet:Cannot be used for specifyi ng the setting. ❖ [ File Transfer ] → [ Default User Na ...

  • Microsoft PRO 906EX - page 51

    43 2. System Settings This chapter describes various items of [ System Setting s ] available in this ma- chine. General Features This section describes various items of [ General Features ] under [ System Settings ] . Default settings are shown in bold type . For the procedure of en tering the [ System Settings ] , see "Accessing User tools (S ...

  • Microsoft PRO 906EX - page 52

    System Settings 44 2 ❖ Warm–up Beeper (copie r/Document Server) You can have the beeper sound when th e machine b ecomes ready to copy af- ter leaving Energy Sa ver mode, or when the power is turned on. • On •O f f ❖ Copy Count Display (copier/Document Serve r) The copy counter can be se t to show the number of copies made (count up) or t ...

  • Microsoft PRO 906EX - page 53

    General Features 45 2 ❖ Interleave Print You can set the timing for functions to switch when [ Print Priority ] has been set to [ Interleave ] . Default: 10 sheets Depending on printing time , set values may change. The timing for functions can be set from 1 to 20 sheets. ❖ Status Indicator You can specify whether the status i ndi cator shows t ...

  • Microsoft PRO 906EX - page 54

    System Settings 46 2 ❖ Output: Document Serv er (Document Server) You can specify a tray to wh ich documents are delivered. •F i n i s h e r A F E • Finisher Upper Tray • Finisher Shift Tray • Booklet Processor • Finisher Booklet Tray ❖ Output: Printer (printer) You can specify a tray to wh ich documents are delivered. The output tray ...

  • Microsoft PRO 906EX - page 55

    General Features 47 2 ❖ System Status/Job List Display Time You can specify how long to display th e System Status an d Job List display for. • On •O f f By selecting [ On ] , you can specify a display time between 10 and 999 se conds. The timing is set to “ 15 second(s) ” by default. ❖ Time Interval between Printing Jobs You can set th ...

  • Microsoft PRO 906EX - page 56

    System Settings 48 2 ❖ Z-fold position Set the folding-back position in unit s of 1 mm when you specify Z-folding. The machine is shipped from the factory wit h this value set to 2 mm (metr ic version) or 0.1 inch (inch version) . The setting ran ge of the folding position for each paper size is given below: •M e t r i c v e r s i o n • A3: 2 ...

  • Microsoft PRO 906EX - page 57

    Timer Settings 49 2 Timer Settings This section describes various items of [ Timer Settings ] under [ System Settings ] . ❖ Auto Off Timer After a specified period has passed, following job completion, the machine automatically turns off, in order to conserve energy. This function is calle d "Auto Off". The machine status after the Auto ...

  • Microsoft PRO 906EX - page 58

    System Settings 50 2 ❖ Printer Auto Reset Timer (printer) Specifies the time to elapse before the printer function reset s. • On •O f f The time can be set from 10 to 999 seconds, using the number keys. The timing is set to " 60 second(s) " by default. ❖ Scanner Auto Reset Timer (scanner) Specifies the time to elapse before the sc ...

  • Microsoft PRO 906EX - page 59

    Timer Settings 51 2 ❖ Weekly Timer: Monday-Sunday Set the time to turn on/off th e power for each day of the week. •P o w e r O n T i m e •P o w e r O f f T i m e Enter the Power On Time and the Powe r Off Time using the 24-hour system. Enter the "hour" and "minute" using the number keys. ...

  • Microsoft PRO 906EX - page 60

    System Settings 52 2 Interface Settings This section describes various items of [ Interface Settings ] under [ System Settings ] . Network This section describes various items of [ Network ] under [ Interface Settings ] . ❖ Machine IPv4 Address Before usin g this machine in th e netw ork environmen t, you must configure the IP address and subnet ...

  • Microsoft PRO 906EX - page 61

    Interface Settings 53 2 ❖ IPv6 Stateless Address Autoconfiguration You can set “IPv6 Stateless Address Autoconf iguration” to “Active” or “Inactive”. • Active •I n a c t i v e ❖ DNS Configuration Make settings for the DNS server. When you select [ Specify ] , enter the [ DNS Server ] IP address as “xxx.xxx.xxx.xxx"(“x&q ...

  • Microsoft PRO 906EX - page 62

    System Settings 54 2 ❖ NCP Delivery Protocol Select the protocol for NCP delivery. •I P X P r i o r i t y • TCP/IP Priority •I P X O n l y •T C P / I P O n l y ❖ NW Frame Type Select the frame type when you use NetWare. • Auto Select •E t h e r n e t I I • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP ❖ SMB Computer Name S ...

  • Microsoft PRO 906EX - page 63

    Interface Settings 55 2 ❖ LAN Type When you have installed th e optional IEEE 802.11b interface unit, select inter- face, IEEE 802.11b (wireless LAN) or Ethernet. • Ethernet • IEEE 802.11b Appears when the optional IEEE 802. 11b interface unit is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected to the ma- chine, the s ...

  • Microsoft PRO 906EX - page 64

    System Settings 56 2 Parallel Interface This section describe s various items of [ Parallel Interface ] under [ Interface Settings ] . [ Parallel Interface ] is displayed when this machine is installed with the IEEE 1284 interface board (optional). ❖ Parallel Timing Sets the timing for the contro l signal of the parallel interface. • ACK outsid ...

  • Microsoft PRO 906EX - page 65

    Interface Settings 57 2 IEEE 1394 This section describes various items of [ IEEE 1394 ] under [ Interface Settings ] . [ IEEE 1394 ] is displayed when this machine is installed with the IEEE 1394 inter- face board (opti onal). ❖ IPv4 Address When you connect the machine to a network using the IEEE 1394 interface, you must configure the IP address ...

  • Microsoft PRO 906EX - page 66

    System Settings 58 2 ❖ WINS Configuration You can specify the WINS server settings. If [ On ] is selected, specify the [ WINS Server ] IP address as “xxx.xxx.xxx.xxx" (“xxx" indicates a number). If DHCP is in use, specify the [ Scope ID ] . Enter [ Scope ID ] using up to 31 alphanumeric characters. • On • Primary WINS Server: 00 ...

  • Microsoft PRO 906EX - page 67

    Interface Settings 59 2 IEEE 802.11b This section describes various items of [ IEEE 802.11b ] under [ Interface Settings ] . [ IEEE 802.11b ] is displayed when this machine is installed with the wireless LAN interface board (optional). Implement respective settings simultaneously. ❖ Communication Mode Be sure to make all se ttings simultaneously. ...

  • Microsoft PRO 906EX - page 68

    System Settings 60 2 ❖ Transmission Speed Specifies the communication speed of the IEEE 802.11b (wireless LAN). • Auto Select • 11Mbps Fixed • 5.5Mbps Fixed •2 M b p s F i x e d •1 M b p s F i x e d ❖ Restore Factory Defaults You can return the IEEE 802.11b (wireles s LAN) settings to their defaults. •N o •Y e s Print List You can ...

  • Microsoft PRO 906EX - page 69

    Interface Settings 61 2 D Press the { Start } key. The configuration page is printed. E Press [ Exit ] . F Press the { User Tools } key. Note ❒ You can also exit by pressing [ Exit ] on the User Tools main menu. ...

  • Microsoft PRO 906EX - page 70

    System Settings 62 2 File Transfer This section describes various items of [ File Transfer ] under [ System Settings ] . ❖ Delivery Option Enables or disables send ing stored or scanned docume nts to ScanRouter V2 delivery server. •O n • Main Delivery Server IPv4 Address: 000.000.000.000 • Sub Delivery Server IPv4 Address: 000.000.000.000 ? ...

  • Microsoft PRO 906EX - page 71

    File Transfer 63 2 ❖ SMTP Authentication You can configure SMTP authentication (PLAIN, LOGIN, CRAMMD5, DI- GEST-MD5). When sending e-mail to an SMTP server, you can enhance the SMTP server secu- rity level by authentication that requir es entering the user name and password. If the SMTP server requires authentication, set [ SMTP Authentication ] ...

  • Microsoft PRO 906EX - page 72

    System Settings 64 2 ❖ Reception Protocol Specify Reception Protocol for the func tion "Auto E-mail Notification". For details about the function "Auto E-mail No tification", see the Web Image- Monitor Help. • POP3 •I M A P 4 •S M T P ❖ POP3/IMAP4 Settings Specify the POP3/IMAP4 server name for sending or receiving E-m ...

  • Microsoft PRO 906EX - page 73

    File Transfer 65 2 ❖ E-mail Reception Interval Specify, in minute s, the time i nterval for the f unction "Auto E-mail Notif ica- tion" via POP3 or IMAP4 server. For details about the function "Auto E-mail Notification", see the Web ImageMonitor Help. • On: 15 minute(s) •O f f If [ On ] i s s e l e c t e d , t h e nu m be ...

  • Microsoft PRO 906EX - page 74

    System Settings 66 2 ❖ Program/Change/Delet e E-mail Message Y o u c a n p r o g r a m , c h a n g e , o r d e l e t e t h e e - m a i l m e s s a g e u s e d w h e n s e n d i n g scan file as an attachment. •P r o g r a m / C h a n g e A Press [ System Settings ] . B Press [ File Transfer ] . C Press [ Program/Change/ Dele te E-mail Message ] ...

  • Microsoft PRO 906EX - page 75

    File Transfer 67 2 ❖ Scanner Resend Interval Time Specifies the interval the machine waits before resending scan file, if they can- not be sent to the delivery server or mail server. The timing is set to " 300 second(s) " by default. The interval time can be set from 60 to 900 seconds in one second increments, using the number keys. Thi ...

  • Microsoft PRO 906EX - page 76

    System Settings 68 2 Administrator Tools This section describes various it ems of [ Administrator Tools ] under [ System Set- tings ] . Administrator Tools are used by the ad ministrator. To change these settings, contact the a dministrator. We recommend specifying Administrato r Authentication before making Ad- ministrator Tools settings. ❖ Addr ...

  • Microsoft PRO 906EX - page 77

    Administrator Tools 69 2 ❖ Address Book: Program/ Change/Delete Group Names registered in the Address Book can be added into a group. You can then ea sily manage the names registered in each group. •P r o g r a m / C h a n g e You can register and change groups. •N a m e s You can register a name, key display, registration number, and title s ...

  • Microsoft PRO 906EX - page 78

    System Settings 70 2 D Press the name key to be move. You can select a name using the number keys. E Press the name key in the pl ace you want to move to. The selected user key is moved to th e selected position, and the user key currently at th e selected position is moved forward or backward. If you move the selected use r key forw ard, the user ...

  • Microsoft PRO 906EX - page 79

    Administrator Tools 71 2 ❖ Print Address Book: Destination List You can print the destination list registered in the Address Book. •P r i n t i n T i t l e 1 O r d e r Prints the Address Book in Title 1 order. •P r i n t i n T i t l e 2 O r d e r Prints the Address Book in Title 2 order. •P r i n t i n T i t l e 3 O r d e r Prints the Addre ...

  • Microsoft PRO 906EX - page 80

    System Settings 72 2 E Enter the new name, and then press [ OK ] . F Press [ OK ] . ❖ Address Book: Switch Title Specifies the title to select a name. • Title 1 • Title 2 • Title 3 ❖ Back Up / Restore Address Book You can back up the machine’s address b ook to external storage or restore t he backup copy from the external storage. •B ...

  • Microsoft PRO 906EX - page 81

    Administrator Tools 73 2 •S c a n n e r C o u n t e r • Print Counter List for All Users Prints the counter values for all the users. • Clear Counter for All Users Sets the counter value for all the users. • Print Counter List per User Prints the counter values for each user. •C l e a r C o u n t e r p e r U s e r Sets the counter va lue ...

  • Microsoft PRO 906EX - page 82

    System Settings 74 2 ❖ Program/Change Administrator For details about this function, co nsult your administrator. ❖ Key Counter Management You can specify th at functions that you want to manage with the key cou nter. •C o p i e r •D o c u m e n t S e r v e r •P r i n t e r •S c a n n e r ❖ Extended Security You can specify w hether o ...

  • Microsoft PRO 906EX - page 83

    Administrator Tools 75 2 ❖ Program / Change / Delete LDAP Server Program the LDAP server to find up e-mail destinations in the LDA P server Address Book directly. This function is possible when sending scan files by e- mail using the scanner. •N a m e •S e r v e r N a m e •S e a r c h B a s e •P o r t N u m b e r • Use Secure Connection ...

  • Microsoft PRO 906EX - page 84

    System Settings 76 2 • Delete A Press [ System Settings ] . B Press [ Administrator Tools ] , and then press [ T Next ] twice. C Press [ Program/Change/Delete LDAP Server ] . D Press [ Delete ] . E Select the LDAP server you want to dele te. F Press [ Yes ] . G Press [ Exit ] . H Press th e { User Tools } key. ❖ LDAP Search You can specify whet ...

  • Microsoft PRO 906EX - page 85

    Administrator Tools 77 2 Program / Change / Delete LDAP Server This section ex plains how to sp ecify the LDAP server settings. To program / change the LDAP server A Press [ System Settings ] . B Press [ Administrator Tools ] , and then press [ T Next ] twice. C Press [ Program / Change / Delete LD AP Server ] . D Check that [ Program / Change ] is ...

  • Microsoft PRO 906EX - page 86

    System Settings 78 2 Programming the LDAP server This section ex plains how to sp ecify the LDAP server settings. To enter an identification name A Press [ Change ] under “Name”. Register a name for the LDAP server th at will appear on the server selection screen of the LD AP search operation . B Enter the server’s identification name. C Pres ...

  • Microsoft PRO 906EX - page 87

    Administrator Tools 79 2 To enter a port number A Press [ Change ] under ““Port No.”. Specify the port number for communicati ng with the LDAP server. Specify a port that is compliant with your environment. B Enter the port number using the number keys, and then press the { # } key. When SSL is set to [ On ] , the port number automatically ch ...

  • Microsoft PRO 906EX - page 88

    System Settings 80 2 To enter the user name and password A Press [ Change ] under “Name”. When [ On ] or [ High Security ] is selected for the authentication set ting, use the administrator account name and passwor d. Do not enter the administrator account name and password when usin g authentication for each individual or each search. B Enter ...

  • Microsoft PRO 906EX - page 89

    Administrator Tools 81 2 To set search conditions A Press [ T Next ] twice. B Press [ Change ] for items you want to use as search conditions from the fol- lowing: [ Name ] , [ E-mail Address ] , [ Company Name ] , and [ Department Name ] . You can enter an at tribute as a typical search keyword. Using the entered at- tribute, the function searches ...

  • Microsoft PRO 906EX - page 90

    System Settings 82 2 E Enter the key display, and then press [ OK ] . The registered “key display” appears as a keyword for sear ching LDAP. • Without key display registration • With key displ ay registration The key does not appear on the search screen unless both “Attribute” and “Key Display” are registe red. Make sure you registe ...

  • Microsoft PRO 906EX - page 91

    System Settings on Main and Sub-machines 83 2 System Settings on Main and Sub-machines This section explains the System Se ttin gs on the two machin es during Connect Copy. While combined copying is under way, the { User Tools } k e y s o f t h e s u b - m a - chines remain disabled. If it is desired to change the defaults, press [ Combined Copying ...

  • Microsoft PRO 906EX - page 92

    System Settings 84 2 ❖ Interleave Print • T h e s e t v a l u e s o f t h e m a i n a n d s u b - m a c h i n e s d o n o t a f f e c t t h e c o m b i n e d copying. ❖ Output: Copier • The main and sub-machines follow their respective se t values. ❖ Output: Document Server • The main and sub-machines follow their respective se t values ...

  • Microsoft PRO 906EX - page 93

    System Settings on Main and Sub-machines 85 2 ❖ Power Off Timer • T h e s e t v a l u e s o f t h e m a i n a n d s u b - m a c h i n e s d o n o t a f f e c t t h e c o m b i n e d copying. • In Connect Copy mode, neither mach ine will enter Ener gy Saver modes (Low Power mode, or Energy Saver mode). When the preset time elapses after the co ...

  • Microsoft PRO 906EX - page 94

    System Settings 86 2 Administrator Tools How the defaults in the Administrator To ols of copy ing of the main and sub-ma- chines are used in combined copying will be explained. ❖ Address Book Management • T h e s e t v a l u e s o f t h e m a i n a n d s u b - m a c h i n e s d o n o t a f f e c t t h e c o m b i n e d copying. ❖ Address Book ...

  • Microsoft PRO 906EX - page 95

    System Settings on Main and Sub-machines 87 2 ❖ Enhanced Authentication Management • The main machine follows the values that are set in it. The set values of the sub-machines do not affect the combined copying. ❖ Administrator Authentication Management • The main machine follows the values that are set in it. The set values of the sub-mach ...

  • Microsoft PRO 906EX - page 96

    System Settings 88 2 ❖ Firmware Version • T h e s e t v a l u e s o f t h e m a i n a n d s u b - m a c h i n e s d o n o t a f f e c t t h e c o m b i n e d copying. ❖ Network Security Level • T h e s e t v a l u e s o f t h e m a i n a n d s u b - m a c h i n e s d o n o t a f f e c t t h e c o m b i n e d copying. ❖ Auto Erase Memory S ...

  • Microsoft PRO 906EX - page 97

    89 3. Tray Paper Settings This section describe s various item s of { Tray Paper Settings } available in this ma- chine. If the specified paper size dif fers from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected. Tray Paper Settings Changing Tray Paper Settings This section ...

  • Microsoft PRO 906EX - page 98

    Tray Paper Settings 90 3 C Change settings, and then press [ OK ] . Quitting Tray Paper Settings This section describes how to change the settings of Tray Paper Setting s. A Press the { Tray Paper Settings } key. Note ❒ You can also quit Tray Pa per Settings by pressing [ Exit ] . APD017S ...

  • Microsoft PRO 906EX - page 99

    Items of Tray Paper Settings 91 3 Items of Tray Paper Settings Default settings are shown in bold type . ❖ Tray 1 You can set the display to show the type of paper loaded the tray 1 (LCT). This information is used by the print functi on to automatically select the paper tr ay. ❖ The paper types •D o n o t D i s p l a y •R e c y c l e d P a ...

  • Microsoft PRO 906EX - page 100

    Tray Paper Settings 92 3 ❖ Copying Method in Duplex • 2 Sided Copy • 1 Sided Copy ❖ Apply Auto Paper Select • Yes •N o ❖ Thick Paper Setting If the LCT (A3 / 11” × 17” Tray Unit TK5000) is utilized, this function is not available. •O n • Off ❖ Designation Sheet 1 - 9 You can specify and display the paper tr ay to set design ...

  • Microsoft PRO 906EX - page 101

    Items of Tray Paper Settings 93 3 ❖ Slip Sheets You can specify and display the paper tray in which to set s lip sheets. You can also specify th e display time. •D i s p l a y T i m e You can select [ At Mode Selected ] or [ Full Time ] . ❖ Separation Sheets You can specify and display the paper tray in which to set s lip sheets. You can also ...

  • Microsoft PRO 906EX - page 102

    Tray Paper Settings 94 3 ❖ The paper sizes "Auto Detect", "12 × 18 L ", "11 × 17 L ", "11 × 15 L ", "11 × 14 L ", "10 × 15 L ", "10 × 14 L ", "8 1 / 2 × 14 L ", "8 1 / 2 × 13 L ", "8 1 / 2 × 11 L ", "11 × "8 1 / 2 K ", &quo ...

  • Microsoft PRO 906EX - page 103

    Items of Tray Paper Settings 95 3 ❖ Back Cover You can specify and display the paper tr ay to set back cover sheets. You can also specify the display time and copying method for two sided copying. •D i s p l a y T i m e You can select [ At Mode Selected ] or [ Full Time ] . • Copying Method in Duplex You can select [ 2 Sided Copy ] or [ 1 Sid ...

  • Microsoft PRO 906EX - page 104

    Tray Paper Settings 96 3 • OHP (Transparency) •T r a n s l u c e n t P a p e r • Preprinted Paper • Prepunched Paper •T a b S t o c k • Tab Position Shift • Number of Tabs ❖ The paper types utilizi ng LCIT RT5010 (A3 LCT) If the LCIT RT5010 is utilized, the pa per types are avail able as follows: •D o n o t D i s p l a y •R e c ...

  • Microsoft PRO 906EX - page 105

    Items of Tray Paper Settings 97 3 ❖ The paper sizes utilizi ng LCIT RT5000 (A4 LCT) If the LCIT RT5000 is utilized, the pa per si zes are available as follows: "Auto Detect", "11 × 8 1 / 2 K ", "8 1 / 2 × 5 1 / 2 K ", "5 1 / 2 × 8 1 / 2 L ", "A4 K ", "A5 K ", "A5 L ", " ...

  • Microsoft PRO 906EX - page 106

    Tray Paper Settings 98 3 ❖ Thick Paper Setting •O n • Off ❖ Designation Sheet 1 - 9 You can specify and display the paper tr ay to set designation sheets. You can also specify the display time and copying method for two sided copying. •D i s p l a y T i m e You can select [ At Mode Selected ] or [ Full Time ] . • Copying Method in Duple ...

  • Microsoft PRO 906EX - page 107

    Items of Tray Paper Settings 99 3 ❖ Tray 5 You can sets the display to show th e type of paper loaded in each of the tray 5 This information is used by the print function to automatically select the pa- per tray. ❖ The paper types utilizi ng LCIT RT5000 (A4 LCT) If the LCIT RT5000 is utilized, the pa per types are avail able as follows: •D o ...

  • Microsoft PRO 906EX - page 108

    Tray Paper Settings 100 3 ❖ The paper types utilizi ng LCIT RT5010 (A3 LCT) If the LCIT RT5010 is utilized, the pa per types are avail able as follows: •D o n o t D i s p l a y •R e c y c l e d P a p e r • Special Paper • Letterhead • Color Paper 1 • Color Paper 2 •Y e l l o w • Green •B l u e •P u r p l e •I v o r y •O r ...

  • Microsoft PRO 906EX - page 109

    Items of Tray Paper Settings 101 3 ❖ The paper sizes utilizi ng LCIT RT5010 (A3 LCT) If the LCIT RT5010 is utilized, the pa per si zes are available as follows: •M e t r i c v e r s i o n : "Auto Detect", "12 × 18 L ", "11 × 17 L ", "11 × 8 1 / 2 K ", "8 1 / 2 × 14 L ", "8 1 / 2 × 11 L ...

  • Microsoft PRO 906EX - page 110

    Tray Paper Settings 102 3 ❖ Designation Sheet 1 - 9 You can specify and display the paper tr ay to set designation sheets. You can also specify the display time and copying method for two sided copying. •D i s p l a y T i m e You can select [ At Mode Selected ] or [ Full Time ] . • Copying Method in Duplex You can select [ 2 Sided Copy ] or [ ...

  • Microsoft PRO 906EX - page 111

    Items of Tray Paper Settings 103 3 ❖ The paper types utilizi ng LCIT RT5000 (A4 LCT) If the LCIT RT5000 is utilized, the pa per types are avail able as follows: •D o n o t D i s p l a y •R e c y c l e d P a p e r • Special Paper • Letterhead • Color Paper 1 • Color Paper 2 •Y e l l o w • Green •B l u e •P u r p l e •I v o r ...

  • Microsoft PRO 906EX - page 112

    Tray Paper Settings 104 3 • OHP (Transparency) •T r a n s l u c e n t P a p e r • Preprinted Paper • Prepunched Paper •T a b S t o c k • Tab Position Shift • Number of Tabs ❖ The paper sizes utilizi ng LCIT RT5000 (A4 LCT) If the LCIT RT5000 is utilized, the pa per si zes are available as follows: "11 × 8 1 / 2 K ", " ...

  • Microsoft PRO 906EX - page 113

    Items of Tray Paper Settings 105 3 ❖ Copying Method in Duplex • 2 Sided Copy • 1 Sided Copy ❖ Apply Auto Paper Select • Yes •N o ❖ Designation Sheet 1 - 9 You can specify and display the paper tr ay to set designation sheets. You can also specify the display time and copying method for two sided copying. •D i s p l a y T i m e You c ...

  • Microsoft PRO 906EX - page 114

    Tray Paper Settings 106 3 ❖ Separation Sheets You can specify and display the paper tray in which to set s lip sheets. You can also specify th e display time. •D i s p l a y T i m e You can select [ At Mode Selected ] or [ Full Time ] . ❖ Tray 7 You can sets the displ ay to show the type of paper loaded the tray 7 This information is used by ...

  • Microsoft PRO 906EX - page 115

    Items of Tray Paper Settings 107 3 ❖ The paper sizes •M e t r i c v e r s i o n : "Auto Detect", "12 × 18 L ", "11 × 17 L ", "11 × 8 1 / 2 K ", "8 1 / 2 × 14 L ", "8 1 / 2 × 11 L ", "5 1 / 2 × 8 1 / 2 L ", "8 1 / 2 × 5 1 / 2 K , "8 1 / 2 × 13 L ", " ...

  • Microsoft PRO 906EX - page 116

    Tray Paper Settings 108 3 ❖ Designation Sheet 1 - 9 You can specify and display the paper tr ay to set designation sheets. You can also specify the display time and copying method for two sided copying. •D i s p l a y T i m e You can select [ At Mode Selected ] or [ Full Time ] . • Copying Method in Duplex You can select [ 2 Sided Copy ] or [ ...

  • Microsoft PRO 906EX - page 117

    Items of Tray Paper Settings 109 3 ❖ The paper sizes •M e t r i c v e r s i o n : "Auto Detect", "12 × 18 L ", "11 × 17 L ", "11 × 8 1 / 2 K ", "8 1 / 2 × 14 L ", "8 1 / 2 × 11 L ", "5 1 / 2 × 8 1 / 2 L ", "8 1 / 2 × 5 1 / 2 K , "8 1 / 2 × 13 L ", " ...

  • Microsoft PRO 906EX - page 118

    Tray Paper Settings 110 3 ❖ Back Cover You can specify and display the paper tr ay to set back cover sheets. You can also specify the display time and copying method for two sided copying. •D i s p l a y T i m e You can select [ At Mode Selected ] or [ Full Time ] . • Copying Method in Duplex You can select [ 2 Sided Copy ] or [ 1 Sided Copy ...

  • Microsoft PRO 906EX - page 119

    Tray Paper Setting on Main and Sub-machines 111 3 Tray Paper Setting on Main and Sub-machines This section ex plains the Tray Paper Se tting on the tw o machines during Con- nect Copy. While combined copying is under way, the { User Tools } k e y s o f t h e s u b - m a - chines remain disabled. If it is desired to change the defaults, press [ Comb ...

  • Microsoft PRO 906EX - page 120

    Tray Paper Settings 112 3 ❖ Paper Type: Tray 5 • The main and sub-machines follow their respective se t values. • In combined copying, only the paper tray corresponding to the paper si ze, orientation, and type that are set in common on the main and sub-ma- chines can be used. To make the most of the combined copying function, it i s a dv is ...

  • Microsoft PRO 906EX - page 121

    113 4. Copier/Document Server Features This chapter describes various items of [ Copier/Document Server Features ] avail- able in this machine. General Features This section describes various items of [ General Features ] under [ Copier/Document Server Features ] . Default settings are shown in bold type . For the procedure for accessing the [ Copi ...

  • Microsoft PRO 906EX - page 122

    Copier/Document Server Features 114 4 ❖ Reserve Job Mode You can set whether to reset the mode to th e initial state or return to t he mode in use before the reserved operation was started when you return to the initial screen after reserved copying finishes. • Reset • Previous job ❖ Reservation Screen Auto-off Timer You can set the time re ...

  • Microsoft PRO 906EX - page 123

    General Features 115 4 ❖ Text You can adjust the edge s of finished image. The outline of a chara cter becomes soft when you se lect "Soft". The outline of a character can be sharply copi ed when you se lect "Sharp". •C o p y Q u a l i t y •S o f t • Normal •S h a r p • Custom Setting •I m a g e D e n s i t y •L ...

  • Microsoft PRO 906EX - page 124

    Copier/Document Server Features 116 4 ❖ Photo You can adjust the quality of finished images according to the type of photo original. “Printed photo” is set for magazine and catalo g photo originals. You can smooth photos by selecting “Print ed photo”. "Glossy Photo" is set for the silver-salt ph otos printed from photo film. If ...

  • Microsoft PRO 906EX - page 125

    General Features 117 4 ❖ Dark Background You can set whethe r "Dark Background" ca n be selected as an original type. •O n • Off ❖ Panel Features Default You can set which items will appear as the function buttons on the basic dis- play. • Off • Reduce/Enlarge • Dup./Combine/Series • Edit Image • Cover/Slip Sheet •S t ...

  • Microsoft PRO 906EX - page 126

    Copier/Document Server Features 118 4 ❖ Special Original Display Defa ults You can set up to three items for displaying on the initial display from five items below. •M i x e d S i z e s •B a t c h •S A D F • Thin Paper •O r i g i n a l S i z e ❖ Tone: Original Remains You can set whether to use a b uzzer to alert you when you forget ...

  • Microsoft PRO 906EX - page 127

    General Features 119 4 ❖ Customize Function: Copier A maximum of four often-used functions can be registered to the function keys. • Off •M i x e d S i z e s •B a t c h •S A D F • Thin Paper ❖ Customize Function: Document Server Storage A maximum of four often-used functions can be registered to the function keys. Registered funct ion ...

  • Microsoft PRO 906EX - page 128

    Copier/Document Server Features 120 4 Reproduction Ratio This section describes various items of [ Reproduction Ratio ] under [ Copier/Docu- ment Server Features ] . ❖ Shortcut R/E You can register up to two frequen tly used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display. You can also ch ...

  • Microsoft PRO 906EX - page 129

    Reproduction Ratio 121 4 •I n c h v e r s i o n • 25% • 50% (11” × 17” → 5 1 / 2 ” × 8 1 / 2 ”) • 65% (11” × 17” → 8 1 / 2 ” × 11 ”) • 73% (11” × 15” → 8 1 / 2 ” × 11 ”) • 78% (8 1 / 2 ” × 14” → 8 1 / 2 ” × 11”) • 85% (F → 8 1 / 2 ” × 11”) • 93% • 121% (8 1 / 2 ” × 14” ? ...

  • Microsoft PRO 906EX - page 130

    Copier/Document Server Features 122 4 •M e t r i c v e r s i o n • 25% • 50% (A3 → A5, F → A5) • 65% (A3 → F) • 71% (A3 → A4, A4 → A5) • 75% (B4 → F4) • 82% (F → A4, B4 → A4) • 93% • 115% (B4 → A3) • 122% (F → A3, A4 → B4) • 141% (A4 → A3, A5 → A4) • 200% (A5 → A3) • 400% • User R/E Ratio (25- ...

  • Microsoft PRO 906EX - page 131

    Reproduction Ratio 123 4 ❖ R/E Ratio Priority You can set the ratio with priority when [ Reduce / Enlarge ] is pressed. •M e t r i c v e r s i o n • 400% • 200% • 141% • 122% • 115% • 93% • 82% • 75% • 71% • 65% • 50% • 25% •I n c h v e r s i o n • 400% • 200% • 155% • 129% • 121% • 93% • 85% • 78% • ...

  • Microsoft PRO 906EX - page 132

    Copier/Document Server Features 124 4 Edit This section describes various items of [ Edit ] under [ Copier/Document Server Fea- tures ] . Default settings are shown in bold type . Enter the width of th e binding margin with t he number keys as follows: • Metric version: 0–30 mm (in increments of 1 mm) • Inch version: 0"-1.2" (in inc ...

  • Microsoft PRO 906EX - page 133

    Edit 125 4 ❖ Back Margin: Top / Bottom You can specif y top and bott om margins o n the back side of copies in Margin Adjustment mode. • Top •B o t t o m Default: •M e t r i c v e r s i o n : Top/Bottom 0 mm • Inch version: Top/Botto m 0.0" ❖ 1 Sided → 2 Sided Auto Ma rgin: TtoT In 1 sided to 2 sided Duplex mode, yo u can specify ...

  • Microsoft PRO 906EX - page 134

    Copier/Document Server Features 126 4 ❖ Erase Original Shadow in Combine In Combine mode, you can specify whether to erase a 3 mm, 0.1" boundary margin around all four edges of each original. • On •O f f ❖ Erase Center Width You can specify the width of the erased center margins with this function. Default: •M e t r i c v e r s i o n ...

  • Microsoft PRO 906EX - page 135

    Edit 127 4 ❖ Orientation: Booklet, Magazine You can select the or ientation of copies to open when using Booklet or Ma g- azine mode. • Open to Left •O p e n t o R i g h t ❖ Copy on Designating Page in Combine You can specify whether to make a combin ed copy on the inserted slip she ets in Desig./Chapter mode. • Combine •D o n n o t C o ...

  • Microsoft PRO 906EX - page 136

    Copier/Document Server Features 128 4 ❖ Double Copies Separation Line You can select a separation line using th e Double Copies function from: None, Solid, Broken A, Brok en B, or Crop Marks. • None • Solid •B r o k e n A •B r o k e n B • Crop Marks ❖ Separation Line in Combine You can select a separation line usin g the Combine funct ...

  • Microsoft PRO 906EX - page 137

    Edit 129 4 • Crop Marks ❖ Copy Back Cover When copying the back cove r, you can spe cify whether to have the back cover outside (outside page) or inside (inside page). • Outside •I n s i d e ❖ Double Co pies Position You can select the copy position of bo ttom or left page according to top or right page as the o riginal image position. ? ...

  • Microsoft PRO 906EX - page 138

    Copier/Document Server Features 130 4 Stamp This section describe s various items of [ Stamp ] un der [ Copier/Document Server Fea- tures ] . Default settings are shown in bold type . Background Numbering This section describes various items of [ Background Numbering ] under [ Stamp ] . ❖ Size You can set the size of the numbers. •S m a l l • ...

  • Microsoft PRO 906EX - page 139

    Stamp 131 4 • Norwegian •D a n i s h • Russian •J a p a n e s e • Simplified Chinese •T r a d i t i o n a l C h i n e s e •H a n g u l ❖ Stamp Priority You can select the stamp type given priority when [ Preset Stamp ] is pressed. • COPY •U R G E N T •P R I O R I T Y •F o r Y o u r I n f o . • PRELIMINARY •F o r I n t e ...

  • Microsoft PRO 906EX - page 140

    Copier/Document Server Features 132 4 •S t a m p P o s i t i o n You can adjust the print position of the stamp within the available range as shown below. Metric version: • "Top Left"…T/B: 4-144mm, L/R: 4-144mm • "Top Center"…T/B: 4-144mm, L/R: 72-72mm • "Top Right"…T/B: 4-144mm, L/R: 4-144mm • "Ce ...

  • Microsoft PRO 906EX - page 141

    Stamp 133 4 • Page to Stamp You can specify whether to print th e stamp on all pages or only the first page. • All Pages •1 s t P a g e O n l y • Dup. Back Pg. Stamp Pos. You can adjust the stamp po s i t i o n f o r b a c k s i d e i n duplex mode, within the available range as shown below. Metric version: • Left-Right: Left 432 mm – R ...

  • Microsoft PRO 906EX - page 142

    Copier/Document Server Features 134 4 •S t a m p P o s i t i o n You can adjust the print position of the User Stamp within the available range as shown below. Metric version: • "Top Left"…T/B: 4-144mm, L/R: 4-144mm • "Top Center"…T/B: 4-144mm, L/R: 72-72mm • "Top Right"…T/B: 4-144mm, L/R: 4-144mm • &qu ...

  • Microsoft PRO 906EX - page 143

    Stamp 135 4 Date Stamp This section describes various items of [ Date Stamp ] under [ Stamp ] . ❖ Format You can select the date format for Date Stamp mode. • MM/DD/YYYY • MM.DD.YYYY • DD/MM/YYYY • DD.MM.YYYY • YYYY.MM.DD Default: •M e t r i c v e r s i o n : DD/MM/YYYY • Inch version: MM/DD/YYYY ❖ Font You can select the Date Sta ...

  • Microsoft PRO 906EX - page 144

    Copier/Document Server Features 136 4 ❖ Stamp Setting You can specify how Date Stamp is printed. •S t a m p P o s i t i o n You can specify where to print the Date St amp. • Top Left •T o p C e n t e r • Top Right •B o t t o m L e f t •B o t t o m C e n t e r • Bottom Right •S t a m p P o s i t i o n You can adjust the print posit ...

  • Microsoft PRO 906EX - page 145

    Stamp 137 4 • Dup. Back Pg. Stamp Pos. You can adjust the stamp po s i t i o n f o r b a c k s i d e i n duplex mode, within the available range as shown below. Metric version: • Left-Right: Left 432 mm – Right 432 mm • Top-Bottom: Top 432 mm – Bottom 432 mm Inch version: • Left-Right: Left 17.0” – Right 17.0” • Top-Bottom: Top ...

  • Microsoft PRO 906EX - page 146

    Copier/Document Server Features 138 4 ❖ Page Numbering in Co mbine You can set page number ing when usin g the Combine function and the Page Numbering function together. • Per Original •P e r C o p y ❖ Stamp on Designating Slip Sheet Yo u ca n se le c t t o p r in t th e pa ge n um b er on t o sl ip sh e et s w he n u s in g t h e D e s- ig ...

  • Microsoft PRO 906EX - page 147

    Stamp 139 4 Inch version: • "Top Left"…T/B: 0.1-5.7”, L/R: 0.1-5.7” • "Top Center"…T/B: 0.1-5.7”, L/R: 2.8-2. 8” • "Top Right"…T/B: 0.1-5.7”, L/R: 0.1-5.7” • "Center Left"…T/B: 2.8-2.8”, L/R: 0.1-5.7” • "Center"…T/B: 2.8-2.8”, L/R: 2.8-2.8” • "Center Ri ...

  • Microsoft PRO 906EX - page 148

    Copier/Document Server Features 140 4 Stamp Text This section describes various items of [ Stamp Text ] under [ Stamp ] . ❖ Font You can select the font in Stamp Text mode. • Font 1 •F o n t 2 •F o n t 3 ❖ Size You can set the size of the stamp printed in Stamp Text mode. • Auto •L a r g e • Middle •S m a l l ❖ Superimpose You c ...

  • Microsoft PRO 906EX - page 149

    Stamp 141 4 •S t a m p P o s i t i o n You can adjust the print position of the Stamp Text within the available range as shown below. Metric version: • "Top Left"…T/B: 4-144mm, L/R: 4-144mm • "Top Center"…T/B: 4-144mm, L/R: 72-72mm • "Top Right"…T/B: 4-144mm, L/R: 4-144mm • "Center Left"…T/B ...

  • Microsoft PRO 906EX - page 150

    Copier/Document Server Features 142 4 Input/Output This section describe s various items of [ Input/Output ] under [ Copier/Document Serv- er Features ] . ❖ SADF Auto Reset I n S A D F m o d e , a n o r i g i n a l m u s t b e s e t within a specified time after the pre- vious original has been fed. You can adjust this time from 3 to 99 seconds i ...

  • Microsoft PRO 906EX - page 151

    Input/Output 143 4 ❖ Staple Position Specify which Top 2 stap les or Bottom shown on the initial dis play with pri - ority. The optional Finisher AFE, or the Book let Processor is required to use this function. •T o p 1 •S l a n t •L e f t 2 •T o p 2 •B o t t o m 1 • Top Right 1 • Right 2 •O f f ❖ Punch Type Specify which punch ...

  • Microsoft PRO 906EX - page 152

    Copier/Document Server Features 144 4 ❖ Finisher: Punch Type Specify the punch type. The optional Finishe r AFE and Multi-hole Punch Unit are required to use th is function. •L e f t 2 •T o p 2 • Right 2 •L e f t 3 •T o p 3 • Right 3 •O f f ❖ Simplified Screen: Finishing Types You can select which key is displayed with higher prio ...

  • Microsoft PRO 906EX - page 153

    Settings for the Document Server 145 4 Settings for the Document Server For details, see "System Settings" , and "Copier/Document Server Features". ❖ Copier/Document Server Features ❖ System Settings Reference p.113 “Copier/Document Server Features” p.43 “System Settings” Heading items Default General Features Docume ...

  • Microsoft PRO 906EX - page 154

    Copier/Document Server Features 146 4 Copier/Document Server Features on Main and Sub-machines This section explains the Copier/Document Server Features on the two ma- chines during Connect Copy. While combined copying is under way, the { User Tools } k e y s o f t h e s u b - m a - chines remain disabled. If it is desired to change the defaults, p ...

  • Microsoft PRO 906EX - page 155

    Copier/Document Server Features on Main and Sub-machines 147 4 ❖ Auto Tray Switching • The main and sub-machines follow their respective se t values. ❖ Text • The main machine follows the values that are set in it. The set values of the sub-machines do not affect the combined copying. ❖ Text/Photo • The main machine follows the values t ...

  • Microsoft PRO 906EX - page 156

    Copier/Document Server Features 148 4 ❖ Special Original Display Defa ult • The main machine follows the values that are set in it. The set values of the sub-machines do not affect the combined copying. ❖ Tone: Original Remains • The main machine follows the values that are set in it. The set values of the sub-machines do not affect the com ...

  • Microsoft PRO 906EX - page 157

    Copier/Document Server Features on Main and Sub-machines 149 4 Edit How the defaults in the Edit of copying of the main and sub-machines are used in combined copying will be explained. ❖ Front Margin: Left/Right • The main machine follows the values that are set in it. The sub-machines follows the settings made on the main machine, regardless o ...

  • Microsoft PRO 906EX - page 158

    Copier/Document Server Features 150 4 ❖ Erase Border Width • The main machine follows the values that are set in it. The sub-machines follows the settings made on the main machine, regardless of the settings made in it. • The operation takes place using the set values of the main machine. ❖ Erase Original Shadow in Combine • The main mach ...

  • Microsoft PRO 906EX - page 159

    Copier/Document Server Features on Main and Sub-machines 151 4 ❖ Separation Line in Combine • The main machine follows the values that are set in it. The sub-machines follows the settings made on the main machine, regardless of the settings made in it. ❖ Copy Back Cover • The main machine follows the values that are set in it. The sub-machi ...

  • Microsoft PRO 906EX - page 160

    Copier/Document Server Features 152 4 ❖ Stamp Format • The main machine follows the values that are set in it. The sub-machines follows the settings made on the main machine, regardless of the settings made in it. ❖ Dup. Back Pg. Stanp Pos. • The main machine follows the values that are set in it. The sub-machines follows the settings made ...

  • Microsoft PRO 906EX - page 161

    Copier/Document Server Features on Main and Sub-machines 153 4 ❖ Superimpose • The main machine follows the values that are set in it. The sub-machines follows the settings made on the main machine, regardless of the settings made in it. ❖ Stamp Setting • The main machine follows the values that are set in it. The sub-machines follows the s ...

  • Microsoft PRO 906EX - page 162

    Copier/Document Server Features 154 4 ❖ Stamp Position • The main machine follows the values that are set in it. The sub-machines follows the settings made on the main machine, regardless of the settings made in it. ❖ Superimpose • The main machine follows the values that are set in it. The sub-machines follows the settings made on the main ...

  • Microsoft PRO 906EX - page 163

    Copier/Document Server Features on Main and Sub-machines 155 4 ❖ Dup. Back Pg. Stamp Pos. • The main machine follows the values that are set in it. The sub-machines follows the settings made on the main machine, regardless of the settings made in it. Input/Output How the defaults in the Stamp of copying of the main and sub-machine s are used in ...

  • Microsoft PRO 906EX - page 164

    Copier/Document Server Features 156 4 ❖ Finisher: Punch Type • The main machine follows the values that are set in it. The sub-machines follows the settings made on the main machine, regardless of the settings made in it. ❖ Simplified Screen: Finishing Types • T h e s e t v a l u e s o f t h e m a i n a n d s u b - m a c h i n e s d o n o t ...

  • Microsoft PRO 906EX - page 165

    157 5. Printer Features This chapter explains various items of [ Printer Features ] available in this machine. List / Test Print This section describes various items of [ List / Test Print ] under [ Printer Features ] . Default settings are shown in bold type . For the procedure for accessing the [ Printer Features ] , see "Accessing Us er Too ...

  • Microsoft PRO 906EX - page 166

    Printer Features 158 5 ❖ PDF Configurat ion/Font Page You can print the curren t configuration and installed PDF font list. This menu can be selecte d only when the optional PostS cript 3 unit is in- stalled. ❖ Hex Dump You can print in the Hex Dump mode. Printing the configuration page A Press [ Printer Features ] . B Press [ Configuration Pag ...

  • Microsoft PRO 906EX - page 167

    List / Test Print 159 5 Interpreting the co nfiguration page ❖ System Reference •U n i t N u m b e r Displays the serial number assigned to the board by its manufacturer. •T o t a l M e m o r y Displays the total amount of memo ry (SDRAM) installed on the printer. • Firmware Version •P r i n t e r Displays the version number of the printe ...

  • Microsoft PRO 906EX - page 168

    Printer Features 160 5 ❖ Host Interf ace Displays settings made unde r the Host Interface menu. W h e n D H C P i s a c t i v e o n t h e n e t w o r k , the actual IP address, subnet mask and gateway address appear in parent heses on the conf iguration page. ❖ Interface Information Displays the interface information. ...

  • Microsoft PRO 906EX - page 169

    Maintenance 161 5 Maintenance This section describes various items of [ Maintenance ] under [ Printer Fe atures ] ❖ List / Test Print Lock You can Lock the [ List/Test Print ] menu. •O n • Off ❖ Delete All Temporary Print Jobs You can delete all print jobs te mporarily stored in the machine. ❖ Delete All Stored Print Jobs You can delete a ...

  • Microsoft PRO 906EX - page 170

    Printer Features 162 5 System This section describes various items of [ System ] under [ Printer Features ] . ❖ Print Error Report Select this to have an error report pr inted when a printer or memory error oc- curs. •O n • Off ❖ Auto Continue You can select this to enable Auto Cont inue. When it is On , printing continue s after a system e ...

  • Microsoft PRO 906EX - page 171

    System 163 5 ❖ Initial Print Job List You can set the desired type of print job list that appears on the screen when you press [ Print Jobs ] . • Complete List Displays the list of print jobs stored in the machine. •L i s t P e r U s e r I D Displays the list of the User ID who stored a file in the machine. ❖ Memory Usage You can select the ...

  • Microsoft PRO 906EX - page 172

    Printer Features 164 5 ❖ Spool Image You can select to print spool images. The print job transmitted fro m the com- puter is temporarily st ored on the mach ine's hard disk as bit map images that can be printed when transmissi on is co mplete. If more than one print job is transmitted, a spool image is printed for each. • Off •O n ❖ Re ...

  • Microsoft PRO 906EX - page 173

    System 165 5 •A 4 •B 5 J I S •A 5 •B 6 J I S •A 6 •8 K • 16K • Custom Size Default: •M e t r i c v e r s i o n : A4 • Inch version: 8 1 / 2 × 11 ❖ Letterhead Setting You can rotate origin al images when printing. When printing, original images are al ways rotated by 180 degrees. Therefore, output might not be as expected wh e ...

  • Microsoft PRO 906EX - page 174

    Printer Features 166 5 ❖ Default Printer Language You can set the default printer language if the machine can not find the printer language automatically. • PCL •P S •P D F This menu appears only whe n the PostSc ript 3 unit (optional) is installed. ❖ Tray Switching You can set to switch the paper tray. • Off •O n Reference "Load ...

  • Microsoft PRO 906EX - page 175

    Host Interface 167 5 Host Interface This section describes various items of [ Host Interface ] un der [ Printer Features ] . Default settings are shown in bold type . ❖ I/O Buffer You can set the size of the I/O Buffer. No rmally it is not necessary to change this setting. • 128KB • 256KB ❖ I/O Timeout You can set how many seconds the machi ...

  • Microsoft PRO 906EX - page 176

    Printer Features 168 5 PCL Menu This section describes various items of [ PCL Menu ] under [ Printer Features ] . Default settings are shown in bold type . ❖ Orientation You can set the page orientation. • Portrait •L a n d s c a p e ❖ Form Lines You can set the nu mber of lines per pag e. • 5 to 128 by 1 Default: •M e t r i c v e r s i ...

  • Microsoft PRO 906EX - page 177

    PCL Menu 169 5 ❖ Symbol Set You can specify the set of print characte rs for the selected font. The available options are as follow s: Roman-8, ISO L1, ISO L2, ISO L5, PC-8 , PC-8 D/N, PC-850, PC-852, PC8-TK, Win L1, Win L2, Win L5, Desktop, PS Text, VN Intl, VN US, MS Publ, Math-8, PS Math, VN Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, I ...

  • Microsoft PRO 906EX - page 178

    Printer Features 170 5 PS Menu This section describes various items of [ PS Menu ] under [ Printer Features ] . Default settings are shown in bold type . This menu appears only when the opti onal PostScript 3 unit is i nstalled. ❖ Data Format You can select a data format. •B i n a r y D a t a • TBCP This setting is not effective when operatin ...

  • Microsoft PRO 906EX - page 179

    PDF Menu 171 5 PDF Menu This section describes various items of [ PDF Menu ] under [ Printer Features ] . Default settings are shown in bold type . ❖ Change PDF Password Set the password for the PDF file executi ng PDF Direct Print. • Current Password • New Password • Confirm New Password A password can be set using on the Web Image Mo nito ...

  • Microsoft PRO 906EX - page 180

    Printer Features 172 5 ...

  • Microsoft PRO 906EX - page 181

    173 6. Scanner Features This chapter describes various items of [ Scanner Features ] available in this ma- chine. General Settings Following describes various items of [ General Settings ] under [ Scanne r Features ] . Default settings are shown in bold type . For the procedure for accessing the [ Scanner Features ] , see "Accessing User Tools ...

  • Microsoft PRO 906EX - page 182

    Scanner Features 174 6 ❖ Destination List Di splay Priority 2 In the machine’s address book, select which address book appears by default. You can select either [ E-mail Address ] or [ Folder ] . • E-mail Address •F o l d e r ❖ Print & Delete Scanner Journal Up to 100 transmission/delivery results can be checked on this machine. If th ...

  • Microsoft PRO 906EX - page 183

    Scan Settings 175 6 Scan Settings Following describes various items of [ Scan Settings ] un der [ Scanner Features ] . ❖ A.C.S. Sensitivity Level Sets the sensitivity level for judging color/black and white for scanning orig- inals when [ Scan Type ] is set to [ Auto Color Selection ] . ❖ Wait Time for Next Orig.: Exposure Glass When dividing o ...

  • Microsoft PRO 906EX - page 184

    Scanner Features 176 6 ❖ Wait Time for Next Original(s): SADF When dividing originals and scanning them separately with the ADF to form a single file, select [ Set Wait Time ] or [ Co ntinuous Wait ] for the waiting status. •C o n t i n u o u s W a i t • Set Wait Time: 60 second(s) This setting is valid if [ SADF ] is specified for [ Original ...

  • Microsoft PRO 906EX - page 185

    Send Settings 177 6 Send Settings This section describes various items of [ Send Settings ] under [ Scanner Features ] . ❖ Compression (Black & White) Select whether or not to compre ss black and white scan files. • On •O f f Compression reduces the time required for transferring the scan file. Th e ac tu a l t i me re q ui re d fo r fi l ...

  • Microsoft PRO 906EX - page 186

    Scanner Features 178 6 ❖ Divide & Send E-mail This function is effective only when [ On ] is selected for [ Max. E-mail Size ] . Select whether or not an image exceeding the size specified in [ Max. E-mail Size ] should be divided and sent using more than one e-mail. • Yes (per Max. Size ): 5 •Y e s ( p e r P a g e ) •N o When [ Yes (pe ...

  • Microsoft PRO 906EX - page 187

    179 7. Registering Addresses and Users for Scanner Functions Following describes the procedure for re gistering the destination and the user. Address Book Registering information such as the names of users and their e-mail addresses in the Address Book allows yo u to manage them easily. Important ❒ Address Book data is stored on the hard disk. It ...

  • Microsoft PRO 906EX - page 188

    Registering Addresses and Users for Scanner Functions 180 7 ❖ Protection You can set protection codes to stop send er's name from bein g used or folders from being accessed without authorization. ❖ E-mail You can register e-mail destin ations in the Address Book. ...

  • Microsoft PRO 906EX - page 189

    Address Book 181 7 ❖ Folder You can register the protocol, path name and server name. •S M B •F T P •N C P ...

  • Microsoft PRO 906EX - page 190

    Registering Addresses and Users for Scanner Functions 182 7 ❖ Add to Group You can put registered e-mail and fol der destinations into a group for easier management. Note ❒ You can also use a Web Image Monitor to register names in the Address Book. With the SmartDeviceMonitor for Admin, you can register multiple names at the same time. ❒ Usin ...

  • Microsoft PRO 906EX - page 191

    Address Book 183 7 Sending scanned files to a shared folder directly After registering the path name, user na me and password, you can connect to a shared folder simply by selecting the destination shown on the initial scanner display wh enever sendin g files usin g the scanner function to a shared folder . To share the fo lder using W ind ows, sel ...

  • Microsoft PRO 906EX - page 192

    Registering Addresses and Users for Scanner Functions 184 7 Registering Names Register user informatio n including their names. The user name is us eful for selectin g a destination when sending e-mail. You can also use it as a folder destination. You can register up to 2000 names. Registering Names Following describes the proc edure for registerin ...

  • Microsoft PRO 906EX - page 193

    Registering Names 185 7 I Press [ OK ] twice. J Press the { User Tools } key. Note ❒ The name can be used for documents in the Document Server. For details about the Document Server. ❒ The keys you can select are as follows: • [ Freq. ] : Added to the page th at is displayed first. • [ AB ] , [ CD ] , [ EF ] , [ GH ] , [ IJK ] , [ LMN ] , [ ...

  • Microsoft PRO 906EX - page 194

    Registering Addresses and Users for Scanner Functions 186 7 H To change the title, press the key for the classification you want to use from Select Title. Note ❒ You can search by the registered name , user code, folder name, or e-mail address. Reference "Entering Text", About This Machine To change a registration number A Press [ Chang ...

  • Microsoft PRO 906EX - page 195

    Authentication Information 187 7 Authentication Information Following describes the procedure for authenticating a user code. Important ❒ The functio ns associated w ith each user code are th e same. If you ch ange or delete user codes, management data and li mits asso ciated with t hat code be- come invalid. Register user codes to limit users to ...

  • Microsoft PRO 906EX - page 196

    Registering Addresses and Users for Scanner Functions 188 7 D Check that [ Program/Change ] is selected. E Press the name whose code is to be registered, or enter the registered num- ber using the number key. You can search by the registered name, us er code, folder name, or e-mail address. F Press [ Auth. Info ] . G Enter the user code using the n ...

  • Microsoft PRO 906EX - page 197

    Authentication Information 189 7 Changing a User Code Following describes the procedure for changin g a registered user code. Important ❒ Even if you change a user code, th e counter value will not be cleared. A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book Management ] . D Check that [ Program/Change ] is s ...

  • Microsoft PRO 906EX - page 198

    Registering Addresses and Users for Scanner Functions 190 7 J Press the key to se lect the functio ns to enable them. Press the ke y to highlight it, and then the f unction is enabl ed. To cancel a s e- lection, press the highl ighted key. K Press [ OK ] . L Press [ Exit ] . M Press the { User Tools } key. Note ❒ To change the name, key display a ...

  • Microsoft PRO 906EX - page 199

    Authentication Information 191 7 G Press [ Change ] to delete the user code, and then press { # } key. H Press [ OK ] . I Press [ Exit ] . J Press the { User Tools } key. Note ❒ To delete a name from the Address Book entirely, see “Deleting a Regis- tered Name”. Reference p.186 “Deleting a Registered Name” Displaying the Counter for Each ...

  • Microsoft PRO 906EX - page 200

    Registering Addresses and Users for Scanner Functions 192 7 Printing the Counter for Each User Following describes the pro cedure for printing the counter that coun ts on indi- vidual user basis. A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Display/Clear/Print Counter per User ] . D Select a user code from th e left sid ...

  • Microsoft PRO 906EX - page 201

    Authentication Information 193 7 F Select the function usage you want to print from [ Copier Counter ] , [ Print Counter ] , and [ Scanner Counter ] . G Press [ Print ] . Printing the Counter for All User Following describes the procedure for printing the counter for all users. A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press ...

  • Microsoft PRO 906EX - page 202

    Registering Addresses and Users for Scanner Functions 194 7 Clearing the Number of Prints Following describes the proced ure for clearing the counter. A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Display/Clear/Print Counter per User ] . D Select the user code to clear. E To clear the number of prints made under a user c ...

  • Microsoft PRO 906EX - page 203

    Authentication Information 195 7 G Select the function usage you want to clear from [ Copier Counter ] , [ Print Counter ] , [ Scanner Counter ] and [ All Counters ] . H Press [ OK ] . I To clear the number of prints for all user codes, press [ Clear ] under All Users. J Select the function usage you want to clear from [ Copier Counter ] , [ Print ...

  • Microsoft PRO 906EX - page 204

    Registering Addresses and Users for Scanner Functions 196 7 E-mail Destination Register e-mail destinations so you do not need to enter an e-mail address eve ry time, and can send scan files fr om scanner function by e-mail. • It is easy to select the e-mail destinat ion if you register “Name" and “Key Dis- play" as the e-mail de st ...

  • Microsoft PRO 906EX - page 205

    E-mail Destination 197 7 G Press [ Change ] . H Enter the e-mail address. I Press [ OK ] . J Select [ E-mail ] . K Press [ OK ] . Note ❒ You can enter up to 128 characters for the e-mail addr ess. ❒ To register the name, see “Registering Na mes”. Reference p.184 “Registering Names” p.187 “Registering a User Code” p.219 “Registerin ...

  • Microsoft PRO 906EX - page 206

    Registering Addresses and Users for Scanner Functions 198 7 Changing an E-mail Destination A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book Management ] . D Check that [ Program/Change ] is selected. E Select the name whose e-mail address you want to change. Press the name key, or enter the regi stered number u ...

  • Microsoft PRO 906EX - page 207

    E-mail Destination 199 7 Using the e-mail address as the sender A Press [ Protection ] . B Press [ Sender ] under [ Use Name as ] . Deleting an E-mail Destination A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book Management ] . D Check that [ Program/Change ] is selected. E Select the name whose e-mail address y ...

  • Microsoft PRO 906EX - page 208

    Registering Addresses and Users for Scanner Functions 200 7 Registering Folders By registering a shared folder, you ca n send scan files to it directly. There are three types of protocol you can use: •S M B For sending files to sh ared Windows folders. •F T P Use when sending files to an FTP server. •N C P Use when sending files to an Net- Wa ...

  • Microsoft PRO 906EX - page 209

    Registering Folders 201 7 B Press [ Administrator Tools ] . C Press [ Address Book Management ] . D Check that [ Program / Change ] is selected. E Select the name whose folder you want to register. Press the name key, or enter the registered number using the number keys. F Press [ Auth. Info ] , and then press [ Next ] . G Press [ Specify Other Aut ...

  • Microsoft PRO 906EX - page 210

    Registering Addresses and Users for Scanner Functions 202 7 R Press [ Exit ] . Note ❒ To register the name, see Registering Names”. ❒ You can enter a path using up to 128 characte rs. ❒ To specify a folder, you can either enter the path m anually or locate the folder by browsing the networ k. ❒ If the connection test fa ils, chec k the se ...

  • Microsoft PRO 906EX - page 211

    Registering Folders 203 7 Using Browse Network to locate the folder A Press [ Browse Network ] . Work groups on the same network are displayed. Network display only lists client co mputers you are authorized to access. B Select the work group. Computers in the selected work group are displayed. C Select a client computer. Shared folders under it ap ...

  • Microsoft PRO 906EX - page 212

    Registering Addresses and Users for Scanner Functions 204 7 Changing a Folder A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book Management ] . D Check that [ Program/Change ] is selected. E Select the name whose folder you want to change. Press the name key, or enter the regi stered number usin g the number ke y ...

  • Microsoft PRO 906EX - page 213

    Registering Folders 205 7 To change the protocol A Press [ FTP ] or [ NCP ] . B A confirmation message appears. Press [ Yes ] . Changing the protocol will clear all se ttings made under the previous protocol. C Enter each items again. Reference p.207 “Registering a Folder” Changing SMB settings To change SMB settings: A Press [ Change ] of path ...

  • Microsoft PRO 906EX - page 214

    Registering Addresses and Users for Scanner Functions 206 7 Deleting a registered folder A [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book Management ] . D Press [ Delete ] . E Select the name whose folder you want to delete. Press the name key, or enter the regi stered number usin g the number ke ys. You can search b ...

  • Microsoft PRO 906EX - page 215

    Registering Folders 207 7 Using FTP to Connect Note ❒ To register a shared folder configured in Windows, see “Using SMB to Connect”. ❒ To register a folder in an NetWare server, see “Using NCP to Connect”. Reference p.200 “Using SMB to Connect” p.212 “Using NCP to Connect” Registering a Folder A Press [ System Settings ] . B Pre ...

  • Microsoft PRO 906EX - page 216

    Registering Addresses and Users for Scanner Functions 208 7 N Press [ FTP ] . O A confirmation message appears. Press [ Yes ] . P Press [ Change ] under Server Name. Q Enter the server name, and then press [ OK ] . R Press [ Change ] under Path. S Enter the path. T Press [ OK ] . U Press [ Change ] under “Port Number”. V Enter Port Number. W Pr ...

  • Microsoft PRO 906EX - page 217

    Registering Folders 209 7 Z Press [ Exit ] . Note ❒ To register the name, see Registering Names”. ❒ You can enter up to 128 characters for the user name. ❒ You can enter up to 128 characters for the password. ❒ You can enter a server name using up to 64 characters. ❒ You can enter an absolute path, using this format: “/us er/ home/use ...

  • Microsoft PRO 906EX - page 218

    Registering Addresses and Users for Scanner Functions 210 7 D Check that [ Program/Change ] is selected. E Select the name whose folder you want to change, and then press [ Folder ] . Press the name key, or enter the regi stered number usin g the number ke ys. You can search by the registered name, us er code, folder name, or e-mail address. F Pres ...

  • Microsoft PRO 906EX - page 219

    Registering Folders 211 7 Changing items under FTP A Press [ Change ] under “Port Number”. B Enter the new port number, and then press { # } . C Press [ Change ] under Server Name. D Enter the new server name, and then press [ OK ] . E Press [ Change ] under “Path”. F Enter the new path, and then press [ OK ] . Deleting a Folder A Press [ S ...

  • Microsoft PRO 906EX - page 220

    Registering Addresses and Users for Scanner Functions 212 7 J Press [ Exit ] . Note ❒ To delete a name entirely, se e “Deleting a Registered Name”. Reference p.186 “Deleting a Registered Name” Using NCP to Connect Note ❒ To register a shared fold er conf igured in Windows, see “Using SMB to Con- nect” ❒ To register a folder in an ...

  • Microsoft PRO 906EX - page 221

    Registering Folders 213 7 I Enter the login user name, and then press [ OK ] . J Press [ Change ] under Login Password. K Enter the password, and then press [ OK ] . L Enter the password again to confirm, and then press [ OK ] . M Press [ Folder ] . N Press [ NCP ] . O A confirmation message appeares. Press [ Yes ] . P Select "Connection Type& ...

  • Microsoft PRO 906EX - page 222

    Registering Addresses and Users for Scanner Functions 214 7 To locate the fo lder manually A Press [ Change ] under Path. B Enter the path where the folder is located. C [ OK ] . D Press [ Connection Test ] to check the path is set correctly. E Press [ Exit ] . Note ❒ If you set "Conne ction Type" to [ NDS ] , and if the NDS tree na me ...

  • Microsoft PRO 906EX - page 223

    Registering Folders 215 7 Changing a registered folder A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book Management ] . D Check that [ Program / Change ] is selected. E Select the user of the registered folder you want to change. Press the name key, or enter the regi stered number usin g the number ke ys. You ca ...

  • Microsoft PRO 906EX - page 224

    Registering Addresses and Users for Scanner Functions 216 7 Changing NCP settings To change NCP settings: A Select the type of connection. B Press [ Change ] of path name. C Enter the name of the path on which the folder is located, and then press [ OK ] . D Press [ Connection Test ] to make sure the path is correctly set up. E When you have made t ...

  • Microsoft PRO 906EX - page 225

    Registering Folders 217 7 Deleting a Folder A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book Management ] . D Check that [ Proglam/Change ] is selected. E Select a user of the fold er you want to delete. Press the name key, or enter the regi stered number usin g the number ke ys. You can search by the registere ...

  • Microsoft PRO 906EX - page 226

    Registering Addresses and Users for Scanner Functions 218 7 Registering Names to a Group You can register names to a group to en able easy management of e-mail address- es and folders for e ach group. To add names to a group, the groups must be registered beforehand. Important ❒ When using Scan to Folder function, you cannot send scan files to a ...

  • Microsoft PRO 906EX - page 227

    Registering Names to a Group 219 7 F Press [ Change ] under Group Name. G Enter the group name, and then press [ OK ] . The Key Displ ay name is set automatically . H Press the title key under Select Title, if necessary. I When you want to change the key display, press [ Change ] under Key Dis- play. Enter the key display, and then press [ OK ] . J ...

  • Microsoft PRO 906EX - page 228

    Registering Addresses and Users for Scanner Functions 220 7 B Press [ Administrator Tools ] . C Press [ Address Book Management ] . D Check that [ Program / Change ] is selected. E Select the name to register in a group. Press the name key, or enter the regi stered number us ing the number keys. You can search by the registered name, us er code, fo ...

  • Microsoft PRO 906EX - page 229

    Registering Names to a Group 221 7 Adding a Groupe to Another Group You can add a group to another group. A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book: Program / Change / Delete Group ] . D Check that [ Program / Change ] is selected. E Select the group that you want to put into another group. Press the gro ...

  • Microsoft PRO 906EX - page 230

    Registering Addresses and Users for Scanner Functions 222 7 G Select the group which you want to add to. The group key that you have selected becomes highlighted, and t he group is added to it. H Press [ OK ] . Displaying Names Registered in a Group You can check the names or grou ps registered in each group. A Press [ System Settings ] . B Press [ ...

  • Microsoft PRO 906EX - page 231

    Registering Names to a Group 223 7 E Select the group where the members you want to check is egistered. You can search by the registered name, us er code, folder name, or e-mail address. F Press [ Programmed User/Group ] . All the names registered will be displayed. G Press [ OK ] . Removing a Name from a Group A Press [ System Settings ] . B Press ...

  • Microsoft PRO 906EX - page 232

    Registering Addresses and Users for Scanner Functions 224 7 G Select the group from which you want to remove the name. The group key is desel ected, and th e name is removed from the group. H Press [ OK ] . Deleting a Group With in Another Group A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book: Program / Change ...

  • Microsoft PRO 906EX - page 233

    Registering Names to a Group 225 7 E Select the group that you want to delete from. Press the group k ey, or enter the regis t ered number during the number keys. You can search by the registered name, us er code, folder name, or e-mail address. F Press [ Add to Group ] . The keys of grou ps in which the group is registered appear highl ighted. G S ...

  • Microsoft PRO 906EX - page 234

    Registering Addresses and Users for Scanner Functions 226 7 Changing a Group Name A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book: Program / Change / Delete Group ] . D Check that [ Program / Change ] is selected. E Press the group key you want to change. You can search by the registered name, us er code, fold ...

  • Microsoft PRO 906EX - page 235

    Registering Names to a Group 227 7 Deleting a Goup A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book: Program / Change / Delete Group ] . D Press [ Delete ] . E Press [ Yes ] . F Press a group key you want to delete. You can search by the registered name, us er code, folder name, or e-mail address. G Press [ Yes ...

  • Microsoft PRO 906EX - page 236

    Registering Addresses and Users for Scanner Functions 228 7 Registering a Protection Code You can stop sender's names or folders bein g accessed by setting a protection code. You can use this function t o protect the following: •F o l d e r s You can prevent unauthorized access to folders. •S e n d e r ' s n a m e s You can prevent mi ...

  • Microsoft PRO 906EX - page 237

    Registering a Protection Code 229 7 F Press [ Protection ] . G Press [ Destination ] or [ Sender ] under Use Name as. Both [ Destination ] and [ Sender ] can be selected at the same time. H Press [ Change ] under Protection Code. I Enter a protection code using the number keys, and then press { # } . J Press [ OK ] . K Press [ Exit ] . Note ❒ You ...

  • Microsoft PRO 906EX - page 238

    Registering Addresses and Users for Scanner Functions 230 7 Registering a Protection Code to a Group User A Press [ System Settings ] . B Press [ Administrator Tools ] . C Press [ Address Book: Program / Change / Delete Group ] . D Check that [ Program / Change ] is selected. E Press the group key you want to register or enter the registered number ...

  • Microsoft PRO 906EX - page 239

    Registering SMTP and LDAP Authentication 231 7 Registering SMTP and LDAP Authentication SMTP Authentication For each us er registered in the Address Book , you can re gister a login use r name and login pas sword to be u sed when accessing an SMTP server. To use an SMTP server, you need to program it beforehand. Important ❒ When [Do not Specify] ...

  • Microsoft PRO 906EX - page 240

    Registering Addresses and Users for Scanner Functions 232 7 H Press [ Change ] under Login User Name. I Enter the login user name, and then press [ OK ] . J Press [ Change ] under Login Password. K Enter the password, and then press [ OK ] . L Enter the password again to confirm, and then press [ OK ] . M [ OK ] . Note ❒ To register the name, see ...

  • Microsoft PRO 906EX - page 241

    Registering SMTP and LDAP Authentication 233 7 LDAP Authentication For each us er registered in the Address Book , you can re gister a login use r name and login pas sword to be u sed when accessing an LDAP server. To use an LDAP server, you need to program it beforehand. For details, see “LDAP Server Settings ", Network Guide. Important ❒ ...

  • Microsoft PRO 906EX - page 242

    Registering Addresses and Users for Scanner Functions 234 7 H Press [ Change ] under Login User Name. I Enter the login user name, and then press [ OK ] . J Press [ Change ] under Login Password. K Enter the password, and then press [ OK ] . L Enter the password again to confirm, and then press [ OK ] . M Press [ OK ] . Note ❒ To register the nam ...

  • Microsoft PRO 906EX - page 243

    235 8. Other User Tools Initial settings allow you sw itch the language as well as checking the number of printed papers by displaying the counter. Changing the Display Language You can change the l anguage used on the display . English is set as default. A Press the { Language Selection } key. Note ❒ If you want to return the display language to ...

  • Microsoft PRO 906EX - page 244

    Other User Tools 236 8 Inquiry The Inquiry function lets you check the telephone numbers to contact for repairs, or ordering consumables such as toner. Be sure to contact your service engineer to verify the following: ❖ Consumables • Telephone No. to order •T o n e r •S t a p l e • Staple (Center) ❖ Machine Maintenance/Repair • Teleph ...

  • Microsoft PRO 906EX - page 245

    Inquiry 237 8 C Press the { Start } key. The inquiry informatio n list is printed out. D Press [ Exit ] twice. ...

  • Microsoft PRO 906EX - page 246

    Other User Tools 238 8 Counter Displaying the Total Counter You can display the total counte r value used for all func tions. You can also print out a counter data list. A Press { Counter } key. B To print a counter list, press [ Print Counter List ] . C Press the { Start } key. A counter list pri nts out. D Press [ Exit ] twice. APD016S ...

  • Microsoft PRO 906EX - page 247

    Counter 239 8 Method of Counting The counter increments “1” for each orig inal sheets. In duplex mode , it counts “2” for front and back of original sheet. ❖ The counter increments at the functions below: •C o p y i n g •P r i n t i n g •S c a n n i n g • Test Print (Multipl e Lists, Configur ation Page, Error Log, Menu List, PCL ...

  • Microsoft PRO 906EX - page 248

    Other User Tools 240 8 ...

  • Microsoft PRO 906EX - page 249

    241 9. Appendix Adjustment Settings for Operators Changing the Adjustment Settings for Operators A Press the { User Tools } key. B Press [ Adjustment Settings for Operators ] . C Select the item that you want to change the value. D Specify the setting value. To select the setting value, press the value on the display. To input the va lue, use the n ...

  • Microsoft PRO 906EX - page 250

    Appendix 242 9 Setting Values Feed ❖ Shift Image With Feed ❖ 1-710-001 : Front Side • Max.: 2 mm • Min.: -2 mm •S t e p : 0 . 1 m m •I n i t i a l v a l u e : 0 ❖ 1-710-002 : Back Side • Max.: 2 mm • Min.: -2 mm •S t e p : 0 . 1 m m •I n i t i a l v a l u e : 0 ❖ 1-710-003 : Front Side (Low Speed Mode) • Max.: 2 mm • Min ...

  • Microsoft PRO 906EX - page 251

    Adjustment Settings for Operators 243 9 ❖ 1-720-002 : Tray 2 •M a x : 2 m m •M i n : - 2 m m •S t e p : 0 . 1 m m •I n i t i a l v a l u e : 0 ❖ 1-720-003 : Tray 3 •M a x : 2 m m •M i n : - 2 m m •S t e p : 0 . 1 m m •I n i t i a l v a l u e : 0 ❖ 1-720-004 : Tray 4 LCT •M a x : 2 m m •M i n : - 2 m m •S t e p : 0 . 1 m ...

  • Microsoft PRO 906EX - page 252

    Appendix 244 9 ❖ Set Fusing Temparature ❖ 1–740–001 : Set Fusi ng Temparature • 1: Raise temperature to improve fusing • 2: Lower temperature to reduce curl ❖ Double-Feed Detection ❖ 1-908-001 : Tray 1 •0 : O f f •1 : O n ❖ 1-908-002 : Tray 2 •0 : O f f •1 : O n ❖ 1-908-003 : Tray 3 •0 : O f f •1 : O n ❖ 1-908-004 ...

  • Microsoft PRO 906EX - page 253

    Adjustment Settings for Operators 245 9 ❖ CIS Img Pos Adj: Feed Setting ❖ 1-911-001 : Tray 1 •0 : O f f •1 : O n ❖ 1-911-002 : Tray 2 •0 : O f f •1 : O n ❖ 1-911-003 : Tray 3 •0 : O f f •1 : O n ❖ 1-911-004 : Tray 4 (LCT Tray 1) •0 : O f f •1 : O n ❖ 1-911-005 : Tray 5 (LCT Tray 2) •0 : O f f •1 : O n ❖ 1-911-006 : ...

  • Microsoft PRO 906EX - page 254

    Appendix 246 9 ❖ 2-750-002 : Copy Im age: Back Side • Max: 0.3 % • Min: -0.3 % •S t e p : 0 . 1 % • Initial value: 0 % ❖ 2-750-003 : Print Image: Front Side • Max: 0.3 % • Min: -0.3 % •S t e p : 0 . 1 % • Initial value: 0 % ❖ 2-750-004 : Print Image: Back Side • Max: 0.3 % • Min: -0.3 % •S t e p : 0 . 1 % • Initial val ...

  • Microsoft PRO 906EX - page 255

    Adjustment Settings for Operators 247 9 Process ❖ Select Test Pattern ❖ 3–740–001 : Select Test Pattern • Trim Pattern ❖ Reset to Defau lts ❖ 3–740–002 : Reset to Defaults Peripherals ❖ Staple Position Adjustment ❖ 6-700-001 : A3-Lengthwise •M a x : 2 m m • Min: -2 mm •S t e p : 0 . 5 m m • Initial value: 0 mm ❖ 6-70 ...

  • Microsoft PRO 906EX - page 256

    Appendix 248 9 ❖ 6-700-005 : B5 SEF •M a x : 2 m m • Min: -2 mm •S t e p : 0 . 1 m m • Initial value: 0 mm ❖ 6-700-006 : B5 LEF •M a x : 2 m m • Min: -2 mm •S t e p : 0 . 1 m m • Initial value: 0 mm ❖ 6-700-007 : DLT SEF •M a x : 2 m m • Min: -2 mm •S t e p : 0 . 5 m m • Initial value: 0 mm ❖ 6-700-008 : LG SEF •M ...

  • Microsoft PRO 906EX - page 257

    Adjustment Settings for Operators 249 9 ❖ Adjust Punch Hole : With Feed ❖ 6-705-001 : 2-Hole: JPN •M a x : 2 m m • Min: -2 mm •S t e p : 0 . 5 m m • Initial value: 0 mm ❖ 6-705-002 : 3-Hole: NA •M a x : 2 m m • Min: -2 mm •S t e p : 0 . 5 m m • Initial value: 0 mm ❖ 6-705-003 : 4-Hole: Europe •M a x : 2 m m • Min: -2 mm ...

  • Microsoft PRO 906EX - page 258

    Appendix 250 9 ❖ 6-730-002 : B4 SEF • Max: 3.0 mm • Min: -3.0 mm •S t e p : 0 . 2 m m • Initial value: 0 mm ❖ 6-730-003 : A4 SEF • Max: 3.0 mm • Min: -3.0 mm •S t e p : 0 . 2 m m • Initial value: 0 mm ❖ 6-730-004 : B5 SEF • Max: 3.0 mm • Min: -3.0 mm •S t e p : 0 . 2 m m • Initial value: 0 mm ❖ 6-730-005 : 12 x 18 SE ...

  • Microsoft PRO 906EX - page 259

    Adjustment Settings for Operators 251 9 ❖ 6-730-009 : Custom Size • Max: 3.0 mm • Min: -3.0 mm •S t e p : 0 . 2 m m • Initial value: 0 mm ❖ Adjust Booklet Fold Position ❖ 6-735-001 : A3 SEF • Max: 3.0 mm • Min: -3.0 mm •S t e p : 0 . 2 m m • Initial value: 0 mm ❖ 6-735-002 : B4 SEF • Max: 3.0 mm • Min: -3.0 mm •S t e p ...

  • Microsoft PRO 906EX - page 260

    Appendix 252 9 ❖ 6-735-006 : DLT • Max: 3.0 mm • Min: -3.0 mm •S t e p : 0 . 2 m m • Initial value: 0 mm ❖ 6-735-007 : LG • Max: 3.0 mm • Min: -3.0 mm •S t e p : 0 . 2 m m • Initial value: 0 mm ❖ 6-735-008 : LT SEF • Max: 3.0 mm • Min: -3.0 mm •S t e p : 0 . 2 m m • Initial value: 0 mm ❖ 6-735-009 : Custom Size • M ...

  • Microsoft PRO 906EX - page 261

    Specifications for the Main Unit 253 9 Specifications for the Main Unit ❖ Configuration: Console ❖ Photosensitivity type: OPC drum ( ∅ 100) ❖ Original scanning: One-dimensional solid scan ning system through C CD ❖ Copy process: Dry electrostatic tr ansfer system ❖ Development: Dry two-component magnetic brush development system ❖ Fus ...

  • Microsoft PRO 906EX - page 262

    Appendix 254 9 ❖ Copy paper weight: • Tray 1 - Tray 3 : 52 - 216 g/m 2 , 16 lb. Bond - 80 lb. Cover • Tray 4, Tray 5 (LCIT RT5000), Tray 4 - Tray 6 (LCIT RT5010) : 52 - 216 g/m 2 , 16 lb. Bond - 80 lb. Cover, 11 0 lb. Index • Tray 6 (LCIT RT5000): 52 - 163 g/m 2 , 16 lb. Bond - 60 lb. Cover • Tray 7 (Multi Bypass Tray BY5000): 52 - 216 g/ ...

  • Microsoft PRO 906EX - page 263

    Specifications for the Main Unit 255 9 ❖ Reproduction ratio: Preset reproduction ratios: •E n l a r g e m e n t Metric version: 400 %, 200 %, 141 %, 122 %, 115 % Inch version: 400 %, 200 %, 155 %, 129 %, 121 % • Full Size Metric version: 100 % Inch version: 100 % •R e d u c t i o n Metric version: 93 %, 82 %, 75 %, 71 %, 65 %, 50 %, 25 % In ...

  • Microsoft PRO 906EX - page 264

    Appendix 256 9 ❖ Power consumption (Type 2: 110 copies/minute model): *1 Main machine with the finisher, Booklet FInisher, A3 LCIT, Multi bypass tray (Tray 7), ADF, interposer and Z-folding Un it. ❖ Power consumption (Type 3: 135 copies/minute model): *1 Main machine with the finisher, Booklet FInisher, A3 LCIT, Multi bypass tray (Tray 7), ADF, ...

  • Microsoft PRO 906EX - page 265

    Specifications for the Main Unit 257 9 ❖ Noise emission *1 (Type 2): Sound power level Sound pressure level *2 *1 The above measurements are ISO 7779 actual values. *2 Measured at the position of the bystan der/operator. During printing. *3 Main machine with full options. ❖ Noise emission *1 (Type 3): Sound power level Sound pressure level *2 * ...

  • Microsoft PRO 906EX - page 266

    Appendix 258 9 Document Server ❖ HDD: 160 GB × 2 ❖ HDD (Document Server): 45 GB ❖ Capacity: • Copy: Approx. 3,000 sheets (ITUT-No.4 chart) • Batch mode: Approx. 3,000 sheets (ITUT-No.4 chart) • Printer: Approx. 15,000 sheets (600 dpi) • Scanner: Approx. 3,000 shee ts (200 dpi/Text) (ITUT-No.4 chart) *1 Note ❒ If you need to change ...

  • Microsoft PRO 906EX - page 267

    Specifications for the Main Unit 259 9 Auto Document Feeder ❖ Mode: ADF mode, Batch mode, SADF mode, Mixed Sizes mode, Thin mode ❖ Original size: •A 3 L –A5 KL • 11" × 17" L – 8 1 / 2 " × 5 1 / 2 " KL ❖ Original weight: • 1-sided originals: 52 - 157 g/m 2 (14 - 42 lb. Bond) • 2-sided originals: 52 - 128 g/m 2 ...

  • Microsoft PRO 906EX - page 268

    Appendix 260 9 Specifications for Options Finisher SR5000 Finisher Upper Tray: ❖ Paper size: A3 L , B4 L , A4 KL , B5 KL , A5 KL , 11" × 17" L , 8 1 / 2 " × 14" L , 8 1 / 2 " × 11" KL , 5 1 / 2 " × 8 1 / 2 " KL , 12" × 18" L ❖ Paper weight : 52 – 216 g/m 2 , 14 – 58 lb . Bond ❖ Stack ...

  • Microsoft PRO 906EX - page 269

    Specifications for Options 261 9 ❖ Stack capacity after stapling • 200–30 sets (10–100 shee ts) (A4 KL , B5 KL , 8 1 / 2 " × 11" KL ) (80 g/m 2 , 20 lb. Bond) • 150 sets (2–9 sheets) (A4 KL , B5 KL , 8 1 / 2 " × 11" KL ) (80 g/m 2 , 20 lb. Bond) • 150–30 sets (10–50 shee ts) (A3 L , B4 L , 11" × 17" ...

  • Microsoft PRO 906EX - page 270

    Appendix 262 9 ❖ Dimensions (W × D × H): 600 × 730 × 980 mm, 23.6” × 28.7” × 38.6” inch ❖ Weight: Approx. 70 kg, 152.4lb Note ❒ Specifications are subject to change without notice. Cover Interposer Tray CI5010 To use the Cover Interpose r Tray CI5010, the Finisher SR5000 or the Booklet Fin- isher BK5000 are required. ❖ Paper siz ...

  • Microsoft PRO 906EX - page 271

    Specifications for Options 263 9 Punch Unit PU5000 To use the Punch Unit PU5000, the Finisher SR5000 or the Booklet Finisher BK5000 are required. ❖ Paper size: •2 h o l e s L : A3 - A6, 11" × 17" - 5 1 / 2 " × 8 1 / 2 " K : A4 - A5, 8 1 / 2 " × 11", 5 1 / 2 " × 8 1 / 2 " •3 h o l e s L : A3, B4, 11& ...

  • Microsoft PRO 906EX - page 272

    Appendix 264 9 Z-folding Unit ZF4000 To use the Z-folding Unit ZF4000, the Booklet Finisher BK5000 is required. ❖ Paper size: A3 L , B4JIS L , A4 KL , B5 KL , 11" × 17" L , 8 1 / 2 " × 14" L , 8 1 / 2 " × 11" KL ❖ Paper weight : 64 – 80 g/m 2 , 17 – 20 lb. Bond ❖ Power consumption Maximum. 100 W (a separat ...

  • Microsoft PRO 906EX - page 273

    Specifications for Options 265 9 LCIT RT5010 A3 Large Capacity Tray ❖ Paper size: Length: A5 K / 8 1 / 2 " × 5 1 / 2 " K – 19” Width: A5 L / 8 1 / 2 " × 5 1 / 2 " L – 13”, 100 mm width with the special side fe nce ❖ Paper weight : Tray 4 – Tray 6: 52 – 216 g/m 2 , 16 lb. Bond – 80 lb. Cover, 110 lb. Index ❖ ...

  • Microsoft PRO 906EX - page 274

    Appendix 266 9 ❖ Weight: Approx. 18 kg (39.7 lb) or less Note ❒ Specifications are subject to change without notice. Others ❖ A3 / 11" × 17" Tray Unit TK5000 You can load A3 L or 11" × 17" L pa per in tray 1 using this unit. ❖ Copy Connector Type 3260 You can utilize the connect copy functi on bridging two machines wit ...

  • Microsoft PRO 906EX - page 275

    Information about Installed Software 267 9 Information about Installed Software expat • The software including controller, etc. (hereinafter "software") install ed on this product uses the expat unde r the conditions mentioned below. • The product manufacturer provide s wa rranty and support to the so ftware of the product including t ...

  • Microsoft PRO 906EX - page 276

    Appendix 268 9 NetBSD 1. Copyright Notice of NetBSD For all users to use this product: This product contains NetB SD operating system: For the most part, the software constit uting the NetBSD operating syst em is not in the public domain; its au thors retain their copy right. The following text shows the co pyright notice used for many of the NetBS ...

  • Microsoft PRO 906EX - page 277

    Information about Installed Software 269 9 2.Authors Name List All product names mentioned herein are trademar ks of their respective owners. The following notices are required to sa tisfy the license terms of the software that we have mentione d in this document: • This product in cludes software develo ped by the University of California, Berke ...

  • Microsoft PRO 906EX - page 278

    Appendix 270 9 Sablotron Sablotron (Version 0.82) Copyright © 20 00 Ginger Alliance Ltd. All Rights Re- served a) The application software installed on this product includes the Sablotron soft- ware Version 0.82 (hereinafter, "Sablotr on 0.82"), with mo difications made by the product manufacturer. The original co de of the Sablotron 0.8 ...

  • Microsoft PRO 906EX - page 279

    Information about Installed Software 271 9 SASL CMU libsasl Tim Martin Rob Earhart Rob Siemborski Copyright (c) 2001 Carnegie Mellon University. All rights reserve d. Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the following conditions are met: A Redistributions of source co de mus ...

  • Microsoft PRO 906EX - page 280

    Appendix 272 9 MD4 Copyright (C) 1990-2, RSA Data Secu rity, Inc. All rights reserved. License to copy and use this software is granted provided that it is iden tified as the "RSA Data Security, Inc. MD4 Mess age-Digest Algorithm" in all material mentioning or referencing this software or this function. License is also granted to make and ...

  • Microsoft PRO 906EX - page 281

    Information about Installed Software 273 9 Samba(Ver 3.0.4) For SMB transmissio n, this machine uses Samba ver 3.0.4 (hereinafter referred to as Samba 3.0.4). Copyright © Andrew Tridgell 1994-1998 This program i s free soft ware; you can r edi stribute it and/or modify it under the terms of the GNU General Public Licens e as published by the Free ...

  • Microsoft PRO 906EX - page 282

    Appendix 274 9 Open SSL Copyright (c) 1998-2004 The OpenSSL Project. All rights reserved. Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the following conditions are met: 1. Redistributions of source code must re tain the above copyright notice, this list of conditions and the followi ...

  • Microsoft PRO 906EX - page 283

    Information about Installed Software 275 9 This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product incl udes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (C) 1995-1998 Eric Young (e ay @cryptsoft.com) All rights reserved. This package is an SSL implementation writ ...

  • Microsoft PRO 906EX - page 284

    Appendix 276 9 THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EX- PRESS OR IMPLIED WARRANTIES, IN CLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERC HANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LI ABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXE ...

  • Microsoft PRO 906EX - page 285

    Information about Installed Software 277 9 [However, none of that term is r elevant at this point in time. All of these restric- tively licence d software com ponents wh ich he talks abou t have been removed from OpenSSH, i.e., - RSA is no longer included, found in the OpenSSL library - IDEA is no longer included, its use is deprecated - DES is now ...

  • Microsoft PRO 906EX - page 286

    Appendix 278 9 NO WARRANTY BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLI- CABLE LAW. EXCEP T WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PRO- GRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING ...

  • Microsoft PRO 906EX - page 287

    Information about Installed Software 279 9 3) One component of the ssh so urce code is under a 3-cl ause BSD license, held by the University of California, since we pu lled these parts from original Berkeley code. Copyright (c) 1983, 1990, 1992, 19 93, 1995 The Regents of the University of Califor nia. All rights reserved. Redistribution and use in ...

  • Microsoft PRO 906EX - page 288

    Appendix 280 9 Jason Downs Solar Designer Todd C. Miller Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the following conditions are met: 1. Redistributions of source code must re tain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions ...

  • Microsoft PRO 906EX - page 289

    Information about Installed Software 281 9 1. Redistributions of source code must re tain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials prov ...

  • Microsoft PRO 906EX - page 290

    Appendix 282 9 THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS CONTRIBUTORS ``AS IS'' AND AN Y EXPRESSED OR IMPLIED WARRAN- TIES, INCLUDING, BUT NOT LIMITE D TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OPENLDAP FOUNDATION, ITS CONTRIBUTORS, OR THE AU ...

  • Microsoft PRO 906EX - page 291

    283 INDEX A About Address Book , 179 Accessing User Tools (Syst em Settings) , 3 A.C.S. S ensitivity Level , 175 Address Book Change Order , 68 Edit Title , 68 Program/Change/Delete Group , 68 Select Title , 68 Address Book Management , 68 ADF Original Table Eleva tion , 43 Adjustment Settings for Operators , 241 Administrator Au thentication Manag ...

  • Microsoft PRO 906EX - page 292

    284 D Dark Background , 113 Data Format , 170 Date Stamp , 135 DDNS Configuration , 52 DDNS Configuration (IEEE 1394) , 57 Default Printer Language , 162 Default User Name/Password (Send) , 62 Delete All Files in Document Server , 68 Delete All Stored Print Jobs , 161 Delete All Temporary Print Jobs , 161 Delete Scanner Journal , 173 Deleting a FTP ...

  • Microsoft PRO 906EX - page 293

    285 Input Prime , 56 Inquiry , 236 Insert Separation Sheet , 142 Interface Settings / System Settings , 52 Interleave Print , 43 Interpreting the configuration page , 159 I/O Buffer , 167 I/O Timeout , 167 IPv4 Address (IEEE 1394) , 57 IPv4 Gateway Address , 52 IPv4 over 1394 , 57 IPv6 Gateway Address , 52 IPv6 Stateless Address Autoconfiguration , ...

  • Microsoft PRO 906EX - page 294

    286 Print Address Book Destination List , 68 Print & Delete Scanner Journal , 173 Printer Auto Reset Timer , 49 Printer Features / Host Interface , 167 Printer Features / Maintenance , 161 Printer Features / PCL Menu , 168 Printer Features / PDF Menu , 171 Printer Features / PS Menu , 17 0 Printer Features / System , 162 Printer Features / Test ...

  • Microsoft PRO 906EX - page 295

    287 Settings Re quired to Use Networ k TWAIN Scanner / IEEE 802.11b (wireless LAN) , 30 Settings Requir ed to Use Scan to Folder Function , 22 Settings Requir ed to Use Scan to Folder Function / Ethernet , 22 Settings Required to Use Scan to Folder Function / IEEE 1394 (IPv4 over 1394) , 23 Settings Required to Use Scan to Folder Function / IEEE 80 ...

  • Microsoft PRO 906EX - page 296

    288 EN USA D102-7572 U Update Deliv ery Server Destinatio n List , 173 User Authentication Management , 68 User Code , 187 User Stamp , 133 Using SMB to Connect , 20 0 Using Util ities to M ake Settings , 33 W Wait Time for Next Orig. Exposure Glass , 175 Wait Time for Next Original(s) SADF , 175 Warm Up Beeper , 43 Weekly Timer Monday-Sunday , 49 ...

  • Microsoft PRO 906EX - page 297

    In accordance with IEC 60417, this machine uses the fol lowing symbols for the main power switch: a means POWER ON. c means STAND BY. Trademarks Microsoft ® , Windows ® and Windows NT ® are registered trademarks of Microsoft Corporati on in the United States and/or other countries. Acrobat ® is a registered trademark of Adobe Systems Incorporat ...

  • Microsoft PRO 906EX - page 298

    Operating Instructions General Settings Guide Type for Pro 906EX Type for Pro 1106EX Type for Pro 1356EX EN USA D102-7572 ...

Manufacturer Microsoft Category Printer

Documents that we receive from a manufacturer of a Microsoft PRO 906EX can be divided into several groups. They are, among others:
- Microsoft technical drawings
- PRO 906EX manuals
- Microsoft product data sheets
- information booklets
- or energy labels Microsoft PRO 906EX
All of them are important, but the most important information from the point of view of use of the device are in the user manual Microsoft PRO 906EX.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Microsoft PRO 906EX, service manual, brief instructions and user manuals Microsoft PRO 906EX. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Microsoft PRO 906EX.

Similar manuals

A complete manual for the device Microsoft PRO 906EX, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Microsoft PRO 906EX by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Microsoft PRO 906EX.

A complete Microsoft manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Microsoft PRO 906EX - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Microsoft PRO 906EX, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Microsoft PRO 906EX, that we can find in the current document
3. Tips how to use the basic functions of the device Microsoft PRO 906EX - which should help us in our first steps of using Microsoft PRO 906EX
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Microsoft PRO 906EX
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Microsoft PRO 906EX in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Microsoft PRO 906EX?

Use the form below

If you did not solve your problem by using a manual Microsoft PRO 906EX, ask a question using the form below. If a user had a similar problem with Microsoft PRO 906EX it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)