-
Harman-Kardon 76 - page 1
CDR 20 CD Recorder OWNER’S MANU AL 0 Power for the digital revolution. ™ ® ...
-
Harman-Kardon 76 - page 2
2 T ABLE OF CONTENTS 3 Introduction 3 Important Information on CD Recording 4 Safety Information 5 F ront-P anel Controls 7 F ront-P anel Information Display 9 Rear -Panel Connections 10 Remote Control Functions 12 Installation and Connections 14 CD Recording Basics 14 Disc T ypes 14 CDR T erminology and Display Messages 15 Playback Basics 15 Loadi ...
-
Harman-Kardon 76 - page 3
3 INTRODUCTION Introduction Thank you for choosing Harman Kardon. T he CDR 20 CD Player/Recorder is a unique product, designed not only to play back your existing library of compact discs , but also to record compact discs from either analog or digi- tal programs . Y ou may feed signals (for record- ing) to the CDR 20 from external sources such as ...
-
Harman-Kardon 76 - page 4
4 SAFETY INFORMA TION Safety Information Important Safety Information V erify Line V oltage Before Use Y our CDR 2 0 has been designed for use with 100- to 240-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit. If you have any questions about the voltag ...
-
Harman-Kardon 76 - page 5
5 FRONT -P ANEL CONTROLS 1 P ower Switch: Press this switch to apply power to the CDR 20. When the unit is first turned on, the Status-Mode Indicator 2 surrounding the switch will turn green. Once the unit has been turned on with this switch, it may be operated from either the front panel or remote control. Press the switch again to turn the unit c ...
-
Harman-Kardon 76 - page 6
6 FRONT -P ANEL CONTROLS Front-P anel Controls @ Finalize: Press this button when a record- ing is complete to initiate the finalization process . The Play/Select Button *j must be pressed within three seconds to acti- vate finalization. Until this button is pressed and the finalization process is complete , CD-R discs may not be played on conventi ...
-
Harman-Kardon 76 - page 7
7 FRONT -P ANEL INFORMA TION DISPLA Y Front-P anel Information Display A C U W D B E F G I H A J K L M N O L M N O P Q Q R S S T V X Y K C D B E A Random Indicators B Program Indicators C Level Indicators D Repeat Indicators E Repeat-Status Indicators F Speed Indicators G Copy-Prohibit Indicator H Dubbing Indicator I Sync Indicator J Dual-Play Indi ...
-
Harman-Kardon 76 - page 8
8 FRONT -P ANEL INFORMA TION DISPLA Y L Time Indicators: These indicators light in conjunction with one of the time indicators MNO to show which of the time status modes is active . M Remaining-Time Indicators: T hese indica- tors light when the Information Display K shows the time remaining on a disc. N T otal Time: T hese indicators light when th ...
-
Harman-Kardon 76 - page 9
9 REAR-P ANEL CONNECTIONS Rear -P anel Connections ¡ ™ £ ¢ ∞ § ⁄ ª AC 100~240V 50-60Hz 28W CDR IN ¶ • ‚ OPTICAL CDP OUT ¡ Play Deck (CDP) Analog Output ™ Record Deck (CDR) Analog Output £ Record Deck (CDR) Analog Input ¢ Play Deck (CDP) Coaxial-Digital Output ∞ Record Deck (CDR) Coaxial-Digita ...
-
Harman-Kardon 76 - page 10
10 REMO TE CONTROL FUNCTIONS ● ● ● ● ● ● Remote Control Functions a P ower -On Button b Play Deck (CDP) Display Control c Play Deck (CDP) Open d Play Deck (CDP) Select e Program f Reverse Search g Single h Program Check i Previous-T rack Skip j Play/Select k Random Play l Dub m Automatic/Manual T rack Increment Selector n T rack Increme ...
-
Harman-Kardon 76 - page 11
11 REMO TE CONTROL FUNCTIONS Remote Control Functions a P ower -On Button: Press this button to turn the CDR 20 on. Note that in order for this control to function, the Front-P anel P ower Switch 1 must first be pressed so that the unit is in the Standby mode . b Play Deck (CDP) Display Control: Press this button to cycle through the various time d ...
-
Harman-Kardon 76 - page 12
12 INST ALLA TION AND CONNECTIONS Important Note: To prevent possible damage to your speak ers or other components in your audio system, we strongly recommend that ALL system components , including the CDR 20, be turned off and unplugged from their AC power source when any connections are made or a new component is installed. Locating the CDR 20 Si ...
-
Harman-Kardon 76 - page 13
13 INST ALLA TION AND CONNECTIONS Installation and Connections Batteries Insert the two AA batteries supplied with the CDR 20’ s remote by turning the remote over so that the bottom of the remote is facing towards you. Gently lift the plastic tab on the battery cover up and away from you, and lift the lid off . Insert the batteries in the remote ...
-
Harman-Kardon 76 - page 14
14 CD RECORDING BASICS CD Recorders (CDRs) are similar to standard CD players , with the addition of the features and controls needed for recording. Functions such as play , search and programming for playback will be familiar , but the recorder will function slightly differently than what you may be used to for magnetic tape recorders . Disc T ype ...
-
Harman-Kardon 76 - page 15
15 PLA YBA CK BASICS Playback of CDs on the CDR 20 resembles that for traditional CD players with a few exceptions to accommodate the availability of two sepa- rate playback decks . Before using the CDR 20, power -up the unit by pressing in the Main P ower Switch 1 . Note that the Status- Mode Indicator 2 will turn green, indicating that the unit i ...
-
Harman-Kardon 76 - page 16
16 PLA YBA CK BASICS Playback Basics Normal Play T o play a disc, first mak e certain that the unit is properly installed and that the Main P ower Switch 1 is turned on. T urn the CDR 20 on by pressing the P ower -On button a on the remote and note that the front-panel display will illuminate . Insert a disc following the instructions shown on the ...
-
Harman-Kardon 76 - page 17
17 PLA YBA CK BASICS Dual-Play Mode Since the CDR 20 has more than one CD deck, you may play a disc in either drawer . When only one deck is playing, the unit is in the Single mode . In the Single mode , the audio output will be fed to all digital and analog jacks for both decks . This means you may select the input on your receiver , preamp or pro ...
-
Harman-Kardon 76 - page 18
18 PROGRAM PLA Y Progr am Play T he CDR 20’ s advanced programming system enables you to program the order in which tracks are played, to repeat one track or all tracks , or to repeat any segment of a disc without regard to track numbers . Programming Play Lists T o program the order of playback for the tr acks on a disc, insert the disc, let the ...
-
Harman-Kardon 76 - page 19
19 PROGRAM PLA Y Progr am Play Repeat A-B T he CDR 20 may be programmed to repeat any section within a track, or a complete passage that includes material from a series of consecu- tive tracks . T o program the unit for A-B Repeat play , first play the disc and locate the point where you wish to begin the repeated section. At the start point, press ...
-
Harman-Kardon 76 - page 20
20 CD RECORDING CD Recording Making recordings on the CDR 20 is simple and easy once you become accustomed to the basics of CD Recording. Before making your first recording, please tak e a moment to review the CDR Basics on page 14. In particular , you will need to become familiar with the types of discs that may or may not be used in the CDR 20. I ...
-
Harman-Kardon 76 - page 21
21 CD RECORDING CD Recording As with all recorded CD-R/CD-RW discs , the disc must be finalized before it can be played in other machines . See page 22 for instructions on disc finalization. Notes on Dubbing: • If you wish to mak e a dub with the tracks in a different order from the original disc, omit tracks on a disc, or make a dub that mixes t ...
-
Harman-Kardon 76 - page 22
22 CD RECORDING CD Recording Although the Level Indicator C will operate , this is only informative and the level may not be changed or adjusted. However , when you are making a recording from an external analog source such as a cassette recorder or the ana- log output of a receiver or preamp , you should adjust the input levels using the Record-Le ...
-
Harman-Kardon 76 - page 23
23 TROUBLESHOO TING GUIDE T r oubleshooting Guide and Error Messages TROUBLESHOO TING GUIDE SYMPT OM POSSIBLE CAUSE SOLUTION Unit does not operate when Standby switch • No AC power • Mak e certain AC power cord is plugged into a live outlet or remote P ower -On is pressed • Check to see if AC outlet is switch controlled • Main P ower Switch ...
-
Harman-Kardon 76 - page 24
250 Crossways P ark Drive, W oodbury , New Y ork 11797 www .harmankardon.com © 2000 Harman Kardon, Incorporated P art #3828R-D009A Signal Format Playback Sampling F requency 44.1kHz D/A Conversion 96kHz, Multi-Bit Delta-Sigma Conversion Oversampling 128 T imes Playback Specifications F requency Response 2Hz – 20,050Hz Playback S/N 105dB Playback ...
Do you have a question concerning Harman-Kardon 76?
Use the form below
If you did not solve your problem by using a manual Harman-Kardon 76, ask a question using the form below. If a user had a similar problem with Harman-Kardon 76 it is likely that he will want to share the way to solve it.