Manual Trane Fan

56 pages 1.72 mb
Download

Go to site of 56

Summary
  • Trane Fan - page 1

    Super Q II Fans Sizes 16 through 44 Model Q ™ Fans Sizes 16 through 60 F AN-DS-2 A ugust 20 0 0 F AN-DS-2 Super Q II Fans Sizes 16 through 44 Model Q Fans Sizes 16 through 60 ...

  • Trane Fan - page 2

    2 Features and Benefits ©American Standard Inc. 2000 Q Fan The Model Q ™ fan is a quiet, airfoil, in- line fan specifically designed for air conditioning applications. This highly refined axial flow fan is available in 13 sizes from 1,000 through 80,000 cfm. Small and compact, the Q fan has proven to be the ideal air moving device for standalone ...

  • Trane Fan - page 3

    3 Contents Q Fan Accessories • Inlet flange — for simplified, rigid connection of ductwork to inlet end of fan • Inlet screen — safety accessory mounted to fan inlet. Heavy , plated steel wire Note: inlet screen and inlet flange are mutually exclusive. • Inlet vanes — mechanically modulate fan capacity • Inlet bellmouth — used with ...

  • Trane Fan - page 4

    4 This chart shows a typical NC level comparison between common vaneaxials, tubular centrifugals, airfoil centrifug als and the T rane Model Q ™ compact fan. The shaded area represents range of vaneaxials tested. T rane Model Q fans require up to 85 percent less cubic space than airfoil centrifugal fans and 40 percent less than common vaneaxials ...

  • Trane Fan - page 5

    5 Features and Benefits Super Q II Plus More than twenty years after the introduction of the Model Q ™ , it still retains its reputation as one of the quietest HV AC fans in the world. This tradition of excellence continues with the introduction of a new Q fan acoustical enclosure and duct silencer so effective and so compact that we named it the ...

  • Trane Fan - page 6

    6 Features and Benefits T r ane Plus Duct Silencer The Plus option is a high performance duct silencer . Designed specifically for the Super Q II and Model Q ™ , it has several unique features that reduce airborne noise and turbulence to exceptionally low levels. Briefly , the Plus option develops maximum static regain while simultaneously limiti ...

  • Trane Fan - page 7

    7 Features and Benefits Low Sound Level, High Efficiency Provided by Unique Aerodynamic Features [7] Hub Streamlining Insulation [9] Airfoil V anes (stationary) [10] Stabilizing Pitch [4] Airfoil Blade Wheel. [5] Aerodynamic Pitch [6] Minimum Tip Clearance [2] Aerodynamic Inlet Bell [12] End Cone [8] Exact Blade to V ane Spacing [11] Precise Diverg ...

  • Trane Fan - page 8

    8 Features and Benefits The low sound and high performance of the T rane Model Q ™ fan are ac hieved by reducing noise-creating, energy- consuming turbulence within the fan. Airflow research and development techniques employed were similar to those used in perfecting today’ s high performance axial flow jet engine compressors. The resulting smo ...

  • Trane Fan - page 9

    9 Features and Benefits The T rane Model Q ™ and Super Q II fans can help you maximize your building’ s usable floor space by using them in place of centrifugal fans. The smaller the equipment room, the more space left for tenants, merchandise, etc. S aving V aluable Equipment Room Space Return or Exhaust Applications Figure F-1 shows a size 44 ...

  • Trane Fan - page 10

    10 Features and Benefits Draw-Thru Supply Application (Large Capacity) A 60-inch, single-width, medium pressure airfoil centrifugal fan is used in the system illustrated in Figure F-5 to supply 45,00 0 cfm of air . This capacity can be easily achieved by installing a pair of 40-inch Model Q™ fans in parallel as shown in Figure F-6. The resulting ...

  • Trane Fan - page 11

    11 Features and Benefits The T rane Model Q ™ fan, with all its precision and quality , is still a cost effective fan. When all necessary system components are considered, it provides substantial installation cost savings. In addition, its small size and variable mounting positions allow more freedom to the designer and installer . First Cost Com ...

  • Trane Fan - page 12

    12 Model Number Description V alid Select- Prod. able Cat. Item Description CYCLE QSE E-cycle 16-44 arr 9 cl 1&2 w/o mtr mtd QSE1 E-cycle 16-44 arr 9 cl1&2 w/mtr mtd QSQ Q-cycle 16-44 arr 9 cl 1,2&3 MTO Std cycle 16-44 arr 1&9 cl 1,2&3 & SQ2 MTO1 Std cycle 16-44 arr 1&9 w/unit coating MTO2 Std cycle 49-60 arr 9 cl 1& ...

  • Trane Fan - page 13

    13 Application Considerations This section assists the system designer in application and control of T rane Q and Super Q II fans. Satisfactory distribution of conditioned air requires a properly chosen fan and a well designed duct system. Abbreviations sp ...... static pressure (in. of water) v p ...... velocity pressure (in. of water) t p ....... ...

  • Trane Fan - page 14

    14 Application Considerations P erfor mance Data Det ermination The fan performance section of this catalog contains a fan performance table and fan curve for each fan size. The performance data contained in this catalog was calculated from tests conducted in accordance with AMCA Standard 210 Laboratory Methods of T esting Fans for R ating. The AMC ...

  • Trane Fan - page 15

    15 The following is the procedure to use when selecting a fan for elevations and temperatures other than standard: 1 Determine the air density from Figure A-3. 2 Divide static pressure at the non- standard condition by the air density ratio. 3 Use the actual cfm and corrected static pressure to determine rpm and bhp from the fan performance tables. ...

  • Trane Fan - page 16

    16 Application Considerations Q and Super Q II Fan Modulation — AC In ver ter Capacity Control Q fans and Super Q II fans can be modulated with AC frequency drives. The T rane Compan y recommends Magnetek low noise inverter drives and Century high efficiency motors for optimum modulation performance. Operating the Q or Super Q II fan on AC freque ...

  • Trane Fan - page 17

    17 Application Considerations The control static pressure can then be expressed as a percent of peak static pressure and plotted. The system modulation curve is described by the curve on the modulation overlay that passes through the design point when the axis is placed on the control static pressure point. The minimum inlet vane cfm can easily be ...

  • Trane Fan - page 18

    18 Application Considerations Parallel Fan Operation The Q fan performance curve has a characteristic shape where two dif ferent cfm’ s are possible at the same static pressure. Therefore, when selecting fans for multiple installation connected with either a common inlet, a common discharge or both, care must be taken to eliminate the possibility ...

  • Trane Fan - page 19

    19 Recommended Super Q II Quiet (NC35) Floor -Mounted (Stack ed) Configuration Application Considerations Operating Cost/Efficiency The quiet Q fan is a very efficient fan. The Q fan mixed-flow type airfoil thrust blades offer outstanding efficiency and operating cost savings over such fan types as plug fans. Designers can compare the Q fan efficie ...

  • Trane Fan - page 20

    20 Application Considerations Q Fan Sound Data T rane Q fans are designed to be used in any installation where a standard airfoil centrifugal fan can be used. The sound level of the Q fan in the difficult to attenuate lower frequencies is lower than that produced by standard airfoil centrifug al fans with the same capacity . Sound levels in the hig ...

  • Trane Fan - page 21

    21 Selection Procedure Q-Fan Sound Power By Octave Band At Nominal Cfm/SP Fan Size 63 Hz 125 HZ 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz 16 2 3 10 16 19 20 13 12 19 2 3 10 16 19 19 13 12 21 2 4 10 16 19 19 13 11 24 3 4 10 16 19 19 13 10 27 3 5 10 16 19 19 13 9 30 4 5 10 16 19 17 13 9 36 4 6 10 16 19 15 13 9 40 5 6 11 16 19 14 12 9 44 5 6 11 16 ...

  • Trane Fan - page 22

    22 Performance Data Fan Size 16” Wheel Dia. 16.5 inches 419 mm Inlet Area 2.05 square feet 0.190 m 2 Outlet Area 1.70 square feet 0.158 m 2 Tip Speed 4.32 x RPM 1.317 ft./minute m/minute Q Fan and Super Q II Size 16 Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 486 1200 RPM 324 Pressure Class Limits Class Maximum RPM I 2585 ...

  • Trane Fan - page 23

    23 Performance Data Q Fan and Super Q II Size 16 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 16” Super Q Fan Size 16” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 24

    24 Performance Data Q Fan and Super Q II Size 19 Fan Size 19” Wheel Dia. 19.0 inches 483 mm Inlet Area 2.61 square feet 0.242 m 2 Outlet Area 2.30 square feet 0.214 m 2 Tip Speed 4.97 x RPM 1.515 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 417 1200 RPM 278 Pressure Class Limits Class Maximum RPM I 2345 ...

  • Trane Fan - page 25

    25 Performance Data Q Fan and Super Q II Size 19 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 19” Super Q Fan Size 19” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 26

    26 Fan Size 21” Wheel Dia. 21.5 inches 546 mm Inlet Area 3.31 square feet 0.308 m 2 Outlet Area 2.88 square feet 0.268 m 2 Tip Speed 5.63 x RPM 1.716 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 380 1200 RPM 253 Performance Data Q Fan and Super Q II Size 21 Pressure Class Limits Class Maximum RPM I 2070 ...

  • Trane Fan - page 27

    27 Performance Data Q Fan and Super Q II Size 21 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 21” Super Q Fan Size 21” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 28

    28 Fan Size 24” Wheel Dia. 24.5 inches 622 mm Inlet Area 4.32 square feet 0.401 m 2 Outlet Area 3.73 square feet 0.347 m 2 Tip Speed 6.41 x RPM 1.954 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 535 1200 RPM 356 Performance Data Q Fan and Super Q II Size 24 Pressure Class Limits Class Maximum RPM I 1772 ...

  • Trane Fan - page 29

    29 Performance Data Q Fan and Super Q II Size 24 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 24” Super Q Fan Size 24” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 30

    30 Fan Size 27” Wheel Dia. 27.0 inches 686 mm Inlet Area 5.20 square feet 0.483 m 2 Outlet Area 4.54 square feet 0.422 m 2 Tip Speed 7.07 x RPM 2.155 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 437 1200 RPM 291 Performance Data Q Fan and Super Q II Size 27 Pressure Class Limits Class Maximum RPM I 1610 ...

  • Trane Fan - page 31

    31 Performance Data Q Fan and Super Q II Size 27 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 27” Super Q Fan Size 27” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 32

    32 Fan Size 30” Wheel Dia. 30.0 inches 762 mm Inlet Area 6.45 square feet 0.599 m 2 Outlet Area 5.60 square feet 0.520 m 2 Tip Speed 7.85 x RPM 2.393 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 365 1200 RPM 243 Performance Data Q Fan and Super Q II Size 30 T able P-6 — Siz e 30 Q-Fan CFM Out- T otal ...

  • Trane Fan - page 33

    33 Performance Data Q Fan and Super Q II Size 30 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 30” Super Q Fan Size 30” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 34

    34 Fan Size 33” Wheel Dia. 33.0 inches 838 mm Inlet Area 7.78 square feet 0.723 m 2 Outlet Area 6.78 square feet 0.630 m 2 Tip Speed 8.64 x RPM 2.633 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 490 1200 RPM 326 Performance Data Q Fan and Super Q II Size 33 T able P-7 — Siz e 33 Q-Fan CFM Out- T otal ...

  • Trane Fan - page 35

    35 Performance Data Q Fan and Super Q II Size 33 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 33” Super Q Fan Size 33” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 36

    36 Fan Size 36” Wheel Dia. 36.5 inches 927 mm Inlet Area 9.52 square feet 0.884 m 2 Outlet Area 8.30 square feet 0.771 m 2 Tip Speed 9.56 x RPM 2.914 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 400 1200 RPM 266 Performance Data Q Fan and Super Q II Size 36 T able P-8 — Siz e 36 Q-Fan CFM Out- T otal ...

  • Trane Fan - page 37

    37 Performance Data Q Fan and Super Q II Size 36 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 36” Super Q Fan Size 36” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 38

    38 Fan Size 40” Wheel Dia. 40.3 inches 1022 mm Inlet Area 11.56 square feet 1.074 m 2 Outlet Area 10.09 square feet 0.937 m 2 Tip Speed 10.54 x RPM 3.213 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 301 1200 RPM 200 Performance Data Q Fan and Super Q II Size 40 T able P-9 — Siz e 40 Q Fan CFM Out- T o ...

  • Trane Fan - page 39

    39 Performance Data Q Fan and Super Q II Size 40 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 40” Super Q Fan Size 40” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 40

    40 Fan Size 44” Wheel Dia. 44.5 inches 1130 mm Inlet Area 14.14 square feet 1.314 m 2 Outlet Area 12.33 square feet 1.145 m 2 Tip Speed 11.65 x RPM 3.551 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 289 1200 RPM 192 Performance Data Q Fan and Super Q II Size 44 T able P-1 0 — Siz e 44 Q-Fan CFM Out- T ...

  • Trane Fan - page 41

    41 Performance Data Q Fan and Super Q II Size 44 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Minimum and Maximum Motor HP Ranges Q Fan Size 44” Super Q Fan Size 44” Min - Max Min - Max Min - Max Min - Max Min - Max Motor HP Motor HP Motor HP Motor HP Motor HP ...

  • Trane Fan - page 42

    42 Fan Size 49” Wheel Dia. 49.0 inches 1245 mm Inlet Area 14.96 square feet 1.390 m 2 Outlet Area 14.96 square feet 1.390 m 2 Tip Speed 12.83 x RPM 3.911 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 301 1200 RPM 201 Performance Data Q Fan Size 49 T able P -1 1 — Siz e 49 Q-Fa n CFM Out- T otal Static ...

  • Trane Fan - page 43

    43 Performance Data Q Fan Size 49 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Super Q II fans are NOT available in size 49. Horiz ontal fans only , for vertical units contact marketing in Lexington. Minimum and Maximum Motor HP Ranges Q Fan Size 49” Super Q Fan ...

  • Trane Fan - page 44

    44 Pressure Class Limits Class Maximum RPM I 857 II 1151 Fan Size 54” Wheel Dia. 54.3 inches 1378 mm Inlet Area 18.37 square feet 1.707 m 2 Outlet Area 18.37 square feet 1.707 m 2 Tip Speed 14.20 x RPM 4.328 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 292 1200 RPM 195 Performance Data Q Fan Size 54 T a ...

  • Trane Fan - page 45

    45 Performance Data Q Fan Size 54 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Super Q fans are NOT available in size 54. Horiz ontal fans only , for vertical units contact marketing in Lexington. Minimum and Maximum Motor HP Ranges Q Fan Size 54” Super Q Fan Siz ...

  • Trane Fan - page 46

    46 Pressure Class Limits Class Maximum RPM I 775 II 1040 Fan Size 60” Wheel Dia. 60.0 inches 1524 mm Inlet Area 22.38 square feet 2.079 m 2 Outlet Area 22.38 square feet 2.079 m 2 Tip Speed 15.71 x RPM 4.788 ft./minute m/minute Minimum Fan RPM (Without VFRB Option) Motor Minimum Fan RPM 1800 RPM 314 1200 RPM 209 Performance Data Q Fan Size 60 T a ...

  • Trane Fan - page 47

    47 Performance Data Q Fan Size 60 Standard fans can be selected ONL Y in the shaded area. Thrust restrains are to be used with fans Class 3 or motors 40 hp and up. Super Q fans are NOT available in size 60. Horiz ontal fans only , for vertical units contact marketing in Lexington. Minimum and Maximum Motor HP Ranges Q Fan Size 60” Super Q Fan Siz ...

  • Trane Fan - page 48

    48 Arrangement 9 Dimensions Drive Unit In Out H Shaft Net Wt. Size A B L W Max. Dia. Lbs. 16 Class I 19 3 / 8 17 7 / 8 28 3 / 8 23 5 / 8 45 15 / 16 115 16 Class II 19 3 / 8 17 7 / 8 28 3 / 8 23 5 / 8 45 15 / 16 115 16 Class III 19 3 / 8 17 7 / 8 28 3 / 8 23 5 / 8 45 1 3 / 16 120 19 Class I 21 7 / 8 20 1 / 2 28 7 / 8 26 1 / 8 48 1 / 4 15 / 16 135 19 ...

  • Trane Fan - page 49

    49 Arrangement 1 Dimensions Drive Unit In Out H Shaft Net Wt. Size A B L W Max. Dia. Lbs. 16 Class III 19 3 / 8 17 7 / 8 28 3 / 8 23 5 / 8 45 1 3 / 16 120 19 Class III 21 7 / 8 20 1 / 2 28 7 / 8 26 1 / 8 47 1 / 2 1 3 / 16 140 21 Class III 24 5 / 8 23 1 / 8 32 3 / 4 2 9 52 1 / 4 1 3 / 16 185 24 Class III 28 1 / 8 26 3 / 8 35 3 / 8 32 7 / 8 56 1 / 8 ...

  • Trane Fan - page 50

    50 Dimensional Data and W eights Roughing-In Dimensions Arrangement 9 Arrangement 9 Dimensions Drive Unit H Shaft Net Wt. Size A L W Max. Dia. Lbs. 49 Class I 52 3 / 8 76 57 1 / 8 79 7 / 8 1 11 / 16 1020 49 Class II 52 3 / 8 76 57 1 / 8 85 1 / 2 2 3 / 16 1075 54 Class I 58 81 7 / 8 62 3 / 4 85 1 / 2 1 15 / 16 1090 54 Class II 58 8 1 7 / 8 62 3 / 4 ...

  • Trane Fan - page 51

    51 Dimensional Data and W eights T able D-2 — Outlet Diffuser (Equalizer) Dimensions Fan Size A B C D E 16 17 7 / 8 19 1 / 4 31 1 / 8 5 1 / 8 19 20 1 / 2 21 5 / 8 3 1 / 2 15 1 / 2 21 23 1 / 4 24 1 / 2 41 1 / 4 6 1 / 8 24 26 3 / 8 27 7 / 8 4 1 / 2 1 1 / 8 6 5 / 8 27 29 1 / 8 30 3 / 4 51 1 / 8 7 30 32 1 / 4 34 1 / 4 5 1 / 2 1 1 / 4 7 3 / 4 33 35 1 ...

  • Trane Fan - page 52

    52 Q Fan Accessory Dimensions Dimensional Data and W eights Figure D-3 — Super Q II 16-44 Sizes T able D-3 Unit Inlet Area Outlet Area Unit Size A B C D E Sq. Ft. F Sq. Ft. G H L W W eights* 16 11 7 / 8 15 1 / 4 45 3 / 8 28 20 1 / 8 2.2 17 7 / 8 1.8 24 30 39 1 / 2 44 1 / 4 411 19 13 1 / 8 16 1 / 2 45 7 / 8 30 1 / 2 22 1 / 8 2.6 19 7 / 8 2.2 26 32 ...

  • Trane Fan - page 53

    53 Q Fan Accessory Dimensions Dimensional Data and W eights T able D-7 — Long Inlet Plus Silencer Fan Approx. Size D B L W eight 16 ” 20 ” 28 ” 40 ” 97 19 ” 22 ” 30 ” 44 ” 117 21 ” 26 ” 34 ” 52 ” 170 24 ” 28 ” 36 ” 56 ” 196 27 ” 32 ” 40 ” 64 ” 256 30 ” 34 ” 42 ” 68 ” 296 33 ” 38 ” 46 ” 76 ” ...

  • Trane Fan - page 54

    54 Q F AN ASSEMBL Y Housing Housings are 14-gauge steel hydraulically expanded to form integral inlet bell and diffuser sections. Hydraulically expanded stiffening ring welded in area of wheel raceway . On V A V variable speed fan units, fan inlet supports are structurally reinforced to handle extra stresses of variable speed fan modulation and fan ...

  • Trane Fan - page 55

    55 ACCESSORIES Inlet Screen (Q, SQ2) Heavy-gauge steel wire mesh. Inlet Bellmouth (Q, SQ2) On unducted inlets, the radius bellmouth uniformly accelerates air into the fan, reducing noise and energy requirements. Plus Duct Silencer (Q, SQ2) Significantly attenuates fan airborne sound levels. Center body of round silencer is dimensional matched to Q- ...

  • Trane Fan - page 56

    Since The T rane Company has a policy of continuous product improvement, it reserves the right to change design and specification without notice. Library Product Literature Product Section Air Handling Product Fans Model 000 Literature T ype Data Sales Catalog Sequence 2 Date A ugust 200 0 File No. PL -AH-F AN-000-DS-2-080 0 Supersedes F AN-DS-2 59 ...

Manufacturer Trane Category Fan

Documents that we receive from a manufacturer of a Trane Fan can be divided into several groups. They are, among others:
- Trane technical drawings
- Fan manuals
- Trane product data sheets
- information booklets
- or energy labels Trane Fan
All of them are important, but the most important information from the point of view of use of the device are in the user manual Trane Fan.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Trane Fan, service manual, brief instructions and user manuals Trane Fan. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Trane Fan.

Similar manuals

A complete manual for the device Trane Fan, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Trane Fan by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Trane Fan.

A complete Trane manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Trane Fan - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Trane Fan, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Trane Fan, that we can find in the current document
3. Tips how to use the basic functions of the device Trane Fan - which should help us in our first steps of using Trane Fan
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Trane Fan
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Trane Fan in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Trane Fan?

Use the form below

If you did not solve your problem by using a manual Trane Fan, ask a question using the form below. If a user had a similar problem with Trane Fan it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)