Manual Brother 1300

20 pages 1.1 mb
Download

Go to site of 20

Summary
  • Brother 1300 - page 1

    Brother PQ- Series Accessories The PQ-series of high-speed straight stitch machines (1300, 1500 and 1500S) are designed to sew quickly and accurately with a wide variety of fabrics, even combinations of har d-to-handle materials! With the extra height as well as extended fabric bed and specialized accessories, these machines lend th em selves to ma ...

  • Brother 1300 - page 2

    Brother PQ- Series Accessories The perfect “marriage” between fe ed pressure and feed dog se ttings is very important for successful stitching. Because the PQ -series machines can handle such a wide range of fabrics, you may need to make adjustments in settings to get the desired balanced stitc h, based on your fabric, thread and technique. Adj ...

  • Brother 1300 - page 3

    Foot 1 General Purpose XA1425-001 Standard PQ foot. Use for most sewing, including thick fabrics or seams; can be used with pin feed. Machine Set-Up: Feed dogs; use one of the three settings based on fabric and whether the pin feed is used. Adjust other settings for fabric used. Materials Needed for Sample: Linen-like fabric General Sewing Directio ...

  • Brother 1300 - page 4

    Foot 2 Pin Feed 136021-001 Standard PQ foot. Used for perfect stitching on otherwise difficult fabric s like velvet, leather and suede or to attach trims, with the pin feed settin g engaged. Machine Set-Up: Feed dogs up, usually with pin feed setting. Adjust the pressure dial to match the pin feed position. Select other settings for fabric used. Ma ...

  • Brother 1300 - page 5

    Foot 3 ¼” Foot XA7258-001 Standard PQ sewing foot for quilting seams Machine Set-Up: Feed dogs up using one of the three settings based on fabric and whether the pi n feed is used. Adjust other setting to match fabric used. Materials Needed for Samples: Quilting cotton, thin batting General Sewing Directions: Use the right side of the foot guide ...

  • Brother 1300 - page 6

    Foot 4 rrow ee settings based n fabric and whether the pi n feed is used. Presser ength are adjusted to produce a balanced stitch. als Needed for Sample: Quilting cotton, upholstery cord wing Directions: iece, wrapping the cord com pletely, for a very tight fit. Sew between the cords. When through, trim off excess fabric close to stitching line. Ap ...

  • Brother 1300 - page 7

    Brother PQ-Accessories Workbook July 2003 63 Foot 5 the fabric ric and whether the pi n feed is used. Adjust etting to fit fabric used. Sample: eavy upholstery fabric s. The design of e foot accommodates heavy materials. S ic P ple ions Dogs l n th Heavyweight SA173 Optional PQ foot designed to sew canvas, fake fur or quilted fabrics with out addin ...

  • Brother 1300 - page 8

    Foot 6 Spring Action Guide 2 mm SA170 Optional PQ foot, one of three feet in this collection, which are useful for pintucks and topstitching Machine Set-Up: Feed dogs up using one of the three settings based on fabric and whether the pi n feed is used. Adjust for the fabric used. Materials Needed for Sample: Chambray General Sewing Directions: Norm ...

  • Brother 1300 - page 9

    Foot 7 Spring Action Guide 5 mm SA170 Optional PQ foot, one of three feet in this collection, which are useful for pintucks and topstitching The lip in these feet are great for guiding around shapes. Machine Set-Up: Feed dogs up using one of the three settings based on fabric and whether the pi n feed is used. Adjust for the fabric used. Materials ...

  • Brother 1300 - page 10

    Foot 8 Spring Action Guide 8 & 2 mm SA170 Optional PQ foot, one of three feet in this collection, which are useful for pintucks and topstitching Machine Set-Up: Feed dogs up using one of the three settings based on fabric and whether the pi n feed is used. Adjust for the fabric used. Materials Needed for Sample: White cotton or linen General Se ...

  • Brother 1300 - page 11

    Foot 9 ction Guide 8, 5 & 2 mm A170 hree feet in this collection, achine Set-Up: tings based is used. Adjust r the fabric used. d N l sew ti used with all thr te tive Spring A S Optional PQ foot, all t which are useful for pintucks and topstitching M Feed dogs up using one of the three set on fabric and whether the pi n feed fo Materials Needed ...

  • Brother 1300 - page 12

    Foot 10 Gathering SA171 Optional PQ foot, used for creating gathered fabric or easing sleeve caps Machine Set-Up: Feed dogs up using one of two settings based on fabric. Adjust other settings for the fabric used. Materials Needed for Sample: Middleweight linen-like f abric and batiste General Sewing Directions: The amount of gathering or easing dif ...

  • Brother 1300 - page 13

    Foot 11 Walking XA7253-001 The walking foot holds the fabric between the presser foot, upper and lower feed dogs to better control difficult fabrics. It is standard on the PQ. Machine Set-Up: Feed dogs up using one of two settings based on fabric. Adjust other settings for the fabric used. Pin feed is not used with this foot. Materials Needed for S ...

  • Brother 1300 - page 14

    Foot 12 Seam Guide XA7256-001 Standard PQ part used to sew evenly spaced rows Machine Set-Up: Feed dogs up using one of the three settings based on fabric and whether the pin feed is used. Other settings are based on the needs of the project. Materials Needed for Sample: Cotton quilting and batting General Sewing Directions: Position the main foot ...

  • Brother 1300 - page 15

    Foot 13 Fabric Separator 184720-001 Standard PQ part, which is used to sew hard-to- manage fabrics like vel vet and lining together Machine Set-Up: Use pin feed setting for feed dogs and pressure dial, other settings based on project. Materials Needed for Sample: Velvet and lining General Sewing Directions: Raise needle and foot and position se par ...

  • Brother 1300 - page 16

    Foot 14 Rolled Hem X57138-001 Standard PQ foot. Use on the edge of fabric, such as hems of dresses or shirts , to fold the edge of the fabric in three while sewing. Machine Set-Up: Feed dogs up using one of the three settings based on fabric and whether the pin feed is used. Other settings are based on the needs of the project. Materials Needed for ...

  • Brother 1300 - page 17

    Foot 15 Zippper Foot 112797-001 Standard PQ foot used fo r attaching zippers and piping Machine Set-Up: Feed dogs up using one of th e three settings based on fabric and whether the pin feed is used (such as attaching zippers to stretch fabric). Other settings are based on the needs of the project. Materials Needed for Sample: Corded piping, linen ...

  • Brother 1300 - page 18

    Foot 16 Invisible Zippper Foot 148475-001 Standard PQ foot used to attach invisible zippers Machine Set-Up: Feed dogs up using one of the three settings based on fabric and whether the pin feed is used (such as attaching zippers to stretc h fabric). Other settings are based on the needs of the pro ject. Materials Needed for Sample: Invisible zipper ...

  • Brother 1300 - page 19

    Foot 17 Quilting XA7255-001 Standard PQ foot used for free motion quilting. Machine Set-Up: Feed dogs down. Lower the foot pressure. There is no need to change other normal settings as you control stitch length as the sandwich is moved. Materials Needed for Sample: Poly/cotton quilting fabr ic, lightweight batting General Sewing Directions: Guide t ...

  • Brother 1300 - page 20

    Brother PQ-Accessories Workbook July 2003 76 Foot 18 Feltscaper SA180S Optional PQ foot accessory used for making felted projects. Machine Set-Up: Place feed dogs in down position before you install the Feltscaper. Make sure the ma chine is turned off before you install this accessory . The felting needles are very sharp. Follow the installation se ...

Manufacturer Brother Category Sewing Machine

Documents that we receive from a manufacturer of a Brother 1300 can be divided into several groups. They are, among others:
- Brother technical drawings
- 1300 manuals
- Brother product data sheets
- information booklets
- or energy labels Brother 1300
All of them are important, but the most important information from the point of view of use of the device are in the user manual Brother 1300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Brother 1300, service manual, brief instructions and user manuals Brother 1300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Brother 1300.

A complete manual for the device Brother 1300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Brother 1300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Brother 1300.

A complete Brother manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Brother 1300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Brother 1300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Brother 1300, that we can find in the current document
3. Tips how to use the basic functions of the device Brother 1300 - which should help us in our first steps of using Brother 1300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Brother 1300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Brother 1300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Brother 1300?

Use the form below

If you did not solve your problem by using a manual Brother 1300, ask a question using the form below. If a user had a similar problem with Brother 1300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)