English dropdown-ico

Manual Speco Technologies CNC5915DNVW

40 pages 11.05 mb
Download

Go to site of 40

Summary
  • Speco Technologies CNC5915DNVW - page 1

    INSTR UCTION MANU AL Intense-IR Camera Speco T echnologies is constantly de veloping pr oduct impr o vements. W e r eserve the right to modify pr oduct design and specifications without notice and without incurring any obligation. Re v. 6/9/10 CVC5815DNV / CVC5815DNVW CVC5915DNV / CVC5915DNVW ...

  • Speco Technologies CNC5915DNVW - page 2

    - 2 - CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PA RT S INSIDE . REFER SER VICING T O QUALIFIED SER VICE PERSONNEL. ISO14001 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO ...

  • Speco Technologies CNC5915DNVW - page 3

    - 3 - Contents Contents 3 4 5 33 Sefety Instructions Precautions T rouble Shooting Menu Set Up ▶ OSD Control Button ▶ Set Up Menu ▶ Menu Set Up ▶ Lens ▶ Exposure ▶ Back Light ▶ White Bal. ▶ Day & Night ▶ 3DNR ▶ Special ▶ Adjust ▶ Reset ▶ Exit ◈ Camera T itle ◈ D - Effect ◈ Motion ◈ Priv acy ◈ Defect 8 31 9 32 ...

  • Speco Technologies CNC5915DNVW - page 4

    - 4 - Pr ecautions Do not install the camer a in extr eme temperatur e conditions. Do not touch the fr ont lens of the camer a. Never k eep the camera pointed dir ectly at str ong light. Do not expose the camer a to r adioactivity. Do not install the camer a under unstable lighting conditions. Do not dr op the camer a or subject it to physical shoc ...

  • Speco Technologies CNC5915DNVW - page 5

    - 5 - S ef et y Instructions Pr ecautions f or use Please handle this camer a car efully : ◑ This camera should be installed by qualied personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ ...

  • Speco Technologies CNC5915DNVW - page 6

    CVC5815DNV CVC5815DNVW 600TV Lines DC Auto Iris V arifocal Lens(2.8mm-12mm) T rue Day/Night Capability ICR-IR Cut F ilter Remov able 850nm IR LEDs * 35pcs Heater 4EA ■ ■ IR LED's 35EA & Heater's 4EA SPECIFICATIONS Intense - IR Hood Camer a DC Auto Iris V arifocal Lens(2.8mm-12mm) / IR LED Built-in 35pcs 1/3" SONY Super HAD ll ...

  • Speco Technologies CNC5915DNVW - page 7

    CVC5915DNV CVC5915DNVW 600TV Lines DC Auto Iris V arifocal Lens(5mm-50mm) T rue Day/Night Capability ICR-IR Cut F ilter Remov able 850nm IR LEDs * 35pcs Heater 4EA ■ ■ IR LED's 35EA & Heater's 4EA Intense - IR Hood Camer a DC Auto Iris V arifocal Lens(5mm-50mm) / IR LED Built-in 35pcs SPECIFICATIONS 1/3" SONY Super HAD ll CCD ...

  • Speco Technologies CNC5915DNVW - page 8

    - 8 - OSD Contr ol Button 1. T ype A, T ype B, T ype C of OSD button could be used when it needs to OSD control. 2. T ype D is extra Option (wired Remote controller) ...

  • Speco Technologies CNC5915DNVW - page 9

    - 9 - ● S etup Menu How to S et U p the camer a menu ΄Ͷ΅͑Ά΁͑;ͶͿΆ ͵ͶͷͲΆͽ΅͑΄Ͷ΅ ΃Ͷ΅ ͶͿ͵ ;ͲͿΆͲͽ ΄͹Ά΅΅Ͷ΃ ΀ͷͷ ͽ΀Έ͑ ;ͺ͵͵ͽͶ ͹ͺ͸͹ ΀ͷͷ ΃Ͷ΅ ͶͿ͵ ΀ͷͷ ͽ΀Έ ;ͺ͵͵ͽͶ ͹ͺ͸͹ ΁΀΄ͺ΅ͺ΀Ϳ ΄ͺ΋Ͷ Ͳ͸ͲͺͿ ͵ͶͷͲΆͽ΅ ΃Ͷ΅ ͶͿ͵ ͽͶ·Ͷͽ ͡ίͩ͑΄ΖΝΖΔΥΒΓΝΖ Ͳͽͽ ...

  • Speco Technologies CNC5915DNVW - page 10

    - 10 - ΃Ͷ΅͑ ͶͿ͵ ͶΉ΅ ͳΆ΃΄ ΅΀ Ϳ͠΀ͷͷ ͸ͲͺͿ ΀ͷͷ ΃Ͷ΅ ͶͿ͵ ΀ͷͷ ʹͲ;͑΅ͺ΅ͽ Ͷ΀ Ϳ͠΀ͷͷ ͷ΃ͶͶ΋ Ͷ΀ Ϳ͠΀ͷͷ ;ͺ΃΃΀΃ ·͞ͷͽͺ΁ ΃΀΅Ͳ΅Ͷ ΀ͷͷ ͵͞΋΀΀;͙͑Ω͑͢ί͑Ω͚ͤͣ ΁ͲͿ͙͑͑͢͞͡͡ί͚͑͢͡͡ ΅ͺͽ΅͙͑͑͢͞͡͡ί͚͑͢͡͡ ΃Ͷ΅Ά΃Ϳ͙͑΃Ͷ΅͠ͶͿ͵͚ ͿͶ͸͑͟ͺ;Ͳ ...

  • Speco Technologies CNC5915DNVW - page 11

    - 1 1 - ΃Ͷ΅ ͶͿ͵ ΃Ͷ΅ ͶͿ͵ ΄͹Ͳ΃΁ͿͶ΄΄ ΃Ͷ΅ ͶͿ͵ ΃Ͷ΅ ͶͿ͵ ΃Ͷ΅ ͶͿ͵ ΃Ͷ΅ ͶͿ͵ ͷͲʹ΅΀΃Ί ΃Ͷ΄Ͷ΅ ΃Ͷ΅ ͶͿ͵ ͶΉͺ΅ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅Ά΃Ϳ ;΀Ϳͺ΅΀΃ ΃Ͷ΅Ά΃Ϳ ʹ΃΅ ͽʹ͵ ΃Ͷ΅Ά΃Ϳ Ͳ͵ͻΆ΄΅ ΃Ͷ΄Ͷ΅ ΃Ͷ΅Ά΃Ϳ ΃Ͷ΅Ά΃Ϳ ͽͶ·Ͷͽ͙͑͑͡ί͚ͧͤ ͳͽΆͶ͑͸ͲͺͿ? ...

  • Speco Technologies CNC5915DNVW - page 12

    - 12 - Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * T he Set Up menu will be displayed on the monitor . 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button. Menu Set Up SETUP 1.L ...

  • Speco Technologies CNC5915DNVW - page 13

    - 13 - 3. Change menu settings using the Left or Right button. * Available v alues or Status are displayed by pressing the Left or Right buttons . Press the button until desired v alue / status is displayed. 4. After Changing the setting move the arrow indicator to EXIT and press the SET button to EXIT . 1. Move the arrow indicator to LENS using th ...

  • Speco Technologies CNC5915DNVW - page 14

    - 14 - 3. Press the RETURN to return to the SETUP menu. NO TE * When DC is selected, the brightness can be adjusted. T he brightness control range is 1 ~ 100. Lens BRIGHTNESS RETURN 100 T his function is used to select Automatic or Manual shutter speed control. 1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select t ...

  • Speco Technologies CNC5915DNVW - page 15

    - 15 - EXPOSURE SENS-UP SHUTTER AGC SENS-UP BLC D-WDR RETURN SENS-UP RETURN AUTO MIDDLE AUTO OFF OFF RET x 4 NO TE *Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed from 1/60, FLK, 1/250~1/100,000. → FLK: Select FLK mode if flick ering occurs; caused by the unmatched frequency of electric light. If select FLK ...

  • Speco Technologies CNC5915DNVW - page 16

    - 16 - * OFF: BLC function does not operate . * BLC: Select LOW/MID/HIGH User can select and define a specific area in scene and view the area clearly . Press the "ENTER" button at the AREA menu, you can change the area lik e a picture 1. Press the "ENTER" button again after area setting, you can change the area like a picture 2 ...

  • Speco Technologies CNC5915DNVW - page 17

    - 17 - * HSBLE: HSBLC function is especially effective for reading car number plates at the night time . Y ou can select and define the required observation area for the target object and ignore a strong light area. Press the "ENTER" button at the AREA menu, you can change the position as shown in Picture 1. Press the "ENTER" bu ...

  • Speco Technologies CNC5915DNVW - page 18

    - 18 - * D-WDR: T his camera which is using 3D-DNR DSP provides intelligent light level control to overcome even strong backlight conditions . → OFF: D-WDR function does not operate . When there are simultaneous bright & dark image area WDR mak es them both distinct and can be selected as OUTDOOR and INDOOR. * RETURN: Select Return to save th ...

  • Speco Technologies CNC5915DNVW - page 19

    - 19 - White Balance T he White Balance function is used to control the “on-screen” colors . 1. Move the arrow indicator to WHITE B AL on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the Left or Right button. * T here ar e thr ee user selectable W hite Balance settings available. * A TW : (Auto T racki ...

  • Speco Technologies CNC5915DNVW - page 20

    - 20 - Day / Night Picture can be displayed in either colour of black and white . 1. Select D A Y / NIGHT using the Up or Down button on the SETUP menu screen. 2. Select the desired mode using the Left and Right buttons . * COLOR : T he picture is always displayed in color . * BW : T his picture is always displayed in black and white . Select BW us ...

  • Speco Technologies CNC5915DNVW - page 21

    - 21 - AREA SMART IR ON SMART IR OFF SIZE IR SMART GAIN AREA RETURN 10 RET → A UT O: T he mode will automatically switches to COLOR in normal condition and switches to BW mode when ambient illumination is low . Press the SET button to set the switching time or D → N(A GC), N → D(A GC) in A UT O mode . DA Y & NIGHT AUTO DELA Y D→N(AGC) N ...

  • Speco Technologies CNC5915DNVW - page 22

    - 22 - 3DNR is used to reduce the level of background noise in a low luminance environment. 1. Move the arrow indicator to 3DNR by using the Up and Down button. 2. Select whether or not to activ ate 3DNR by using the Left and Right buttons . * ON: Activ ates 3DNR - Digial noise reduction can be adjusted between 0 ~ 100. * OFF: Deactiv ates 3DNR - n ...

  • Speco Technologies CNC5915DNVW - page 23

    - 23 - Special When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons . Select one of the mode using the Up and Down button. 1. CAM TITLE : When input, the Camera ID is displayed on the monitor . 1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen. 1-2) Set to ON using the L ...

  • Speco Technologies CNC5915DNVW - page 24

    - 24 - 1-3) Press the SETUP button. CAMERA TITLE CAMERA TITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ▷ → ← ↑ ↓ ( ) - ㅡ _ □ / = & : ~ , . ← → CLR POS END 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ▷ → ← ↑ ↓ ( ) - ㅡ _ □ / = & : ~ , . ← → CLR POS END NO TE * When CAMERA TITLE is set to OFF , the CAMERA TITLE is ...

  • Speco Technologies CNC5915DNVW - page 25

    - 25 - NO TE * In cases where the wrong Camera ID has been input........ Move the cursor to CLR and press SETUP button to erase characters from left to right, and repeat the above steps to input the characters again. 1-5) T o select the position where the Camera ID should be displayed on the screen. ① Move the cursor to POS and press the SET butt ...

  • Speco Technologies CNC5915DNVW - page 26

    - 26 - ③ Select a new position by using the four directional button, Press the SET button to confirm the position. CAM1 2. D - EFFECT Move the cursor to D-EFFECT and press the SET button to set the other image functions . D-EFFECT D-EFFECT FREEZE MIRROR D-ZOOM RETURN FREEZE MIRROR D-ZOOM RETURN OFF OFF OFF RET OFF OFF OFF RET 2 -1) MIRROR : Flip ...

  • Speco Technologies CNC5915DNVW - page 27

    - 27 - 2-2) D - ZOOM: Digital zoom av ailable , range x1 ~ x32. P AN : The pan range can be controlled between -10 ~ + 100 TIL T : The tilt range can be controlled between -10 ~ + 100 * V -FLIP : Flip the image vertically on the screen. * RO T A TE : Flip the horizontal image vertically on the screen. * OFF : Disabled. MIRROR ON MIRROR OFF NO TE * ...

  • Speco Technologies CNC5915DNVW - page 28

    - 28 - 2-3) GAMMA : Desired gamma v alues can be adjusted between 0.05 ~ 1.00. 2-4) NEG . IMAGE : ON : Activ ates negative image just lik e film OFF : Normal image 2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu. 3. MO TION 3-1) When the special menu screen is displayed, use the Up or Down botton ...

  • Speco Technologies CNC5915DNVW - page 29

    - 29 - 4. PRIV ACY Hide an area you want to hide on the screen. 4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to PRIV A CY . 4-2). Set up the area mode using the 4 direction buttons . ① AREA SELECT : Y ou can select up to 8 MD area. ② AREA DISPLA Y : OFF : Disabled ON : Activ ates area displa PRIV ACY ARE ...

  • Speco Technologies CNC5915DNVW - page 30

    - 30 - ③ Move the arrow indicator to WIDTH to mak e desired width of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100. ④ Move the arrow indicator to HEIGHT to mak e desired height of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100. ⑤ Move the arrow indicator to t ...

  • Speco Technologies CNC5915DNVW - page 31

    - 31 - ADJUST 1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons . SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DA Y / NIGHT 5.3DNR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC AT W AUTO ON 2. Select the desired mode by using Up or Down button.. SHARPNESS : Improving image clarity . T he level can be adjusted to obtain an impr ...

  • Speco Technologies CNC5915DNVW - page 32

    - 32 - RESET Resets the camera settings to the factory defaults . EXIT Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu. SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DA Y / NIGHT 5.3DNR 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT DC AT W AUTO ON RESET F ACTOR Y RETURN RET SETUP 1.LENS 2.EXPOSURE 3.WHITE BAL 4.DA Y / NIGHT 5 ...

  • Speco Technologies CNC5915DNVW - page 33

    - 33 - Trouble Shooting PR OBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor . ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. ☞ Adjust the monitor controls, as required. ☞ If the camera is facing a very strong ...

  • Speco Technologies CNC5915DNVW - page 34

    - 34 - POLICY, TERMS AND CONDITIONS OF SALE This statement of policy is in lieu of any other policy, expressed or implied, and no representative or person is authorized to assume for us any other liability or policy without our written consent. We cannot be held responsible for typographical errors. TERMS OF PAYMENT 2%, 10 days, net 30 from invoice ...

  • Speco Technologies CNC5915DNVW - page 35

    - 35 - - MEMO - ...

  • Speco Technologies CNC5915DNVW - page 36

    - 36 - - MEMO - ...

  • Speco Technologies CNC5915DNVW - page 37

    - 37 - - MEMO - ...

  • Speco Technologies CNC5915DNVW - page 38

    - 38 - - MEMO - ...

  • Speco Technologies CNC5915DNVW - page 39

    - 39 - - MEMO - ...

  • Speco Technologies CNC5915DNVW - page 40

    200 New Highway Amityville, NY 1 1701 631-957-8700 1 800 645 5516 www .specotech.com ...

Manufacturer Speco Technologies Category Security Camera

Documents that we receive from a manufacturer of a Speco Technologies CNC5915DNVW can be divided into several groups. They are, among others:
- Speco Technologies technical drawings
- CNC5915DNVW manuals
- Speco Technologies product data sheets
- information booklets
- or energy labels Speco Technologies CNC5915DNVW
All of them are important, but the most important information from the point of view of use of the device are in the user manual Speco Technologies CNC5915DNVW.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Speco Technologies CNC5915DNVW, service manual, brief instructions and user manuals Speco Technologies CNC5915DNVW. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Speco Technologies CNC5915DNVW.

Similar manuals

A complete manual for the device Speco Technologies CNC5915DNVW, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Speco Technologies CNC5915DNVW by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Speco Technologies CNC5915DNVW.

A complete Speco Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Speco Technologies CNC5915DNVW - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Speco Technologies CNC5915DNVW, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Speco Technologies CNC5915DNVW, that we can find in the current document
3. Tips how to use the basic functions of the device Speco Technologies CNC5915DNVW - which should help us in our first steps of using Speco Technologies CNC5915DNVW
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Speco Technologies CNC5915DNVW
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Speco Technologies CNC5915DNVW in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Speco Technologies CNC5915DNVW?

Use the form below

If you did not solve your problem by using a manual Speco Technologies CNC5915DNVW, ask a question using the form below. If a user had a similar problem with Speco Technologies CNC5915DNVW it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)