Manual Teac CR-H255

44 pages 1.68 mb
Download

Go to site of 44

Summary
  • Teac CR-H255 - page 1

    9A10355200 CR-H255 OWNER’S MANUAL CD/Receiver Z ...

  • Teac CR-H255 - page 2

    2 Contents Thanks you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . 3 Compact Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 MP3 and WMA . ...

  • Teac CR-H255 - page 3

    CAUTION The product shall not be exposed to dripping or splashing and that no object filled with liquids, such as vases, shall be placed on the product. Do not install this equipment in a confined space such as a book case or similar unit. 3 Before Use Read this before operation < As the unit may become warm during operation, always leave suffic ...

  • Teac CR-H255 - page 4

    Compact Disc Discs which can be played on this unit: • Conventional audio CDs bearing the CD-DA logo on the label: • Properly finalized CD-R and CD-RW discs Note: < Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable. < Copy-protected discs and other discs which do not conf ...

  • Teac CR-H255 - page 5

    5 MP3 and WMA < This unit can play MP3 and WMA files recorded on a CD-R, CD-RW or USB storage device. < File names of MP3 or WMA should be alphanumeric characters. This unit cannot display symbols and full-size or double-byte characters (such as Japanese, Chinese, etc.) correctly. Also, be sure to use the file extension. (‘.mp3’ for MP3 f ...

  • Teac CR-H255 - page 6

    6 Connections SUBWOOFER SPEAKER LINE IN A B Speaker Connections Caution: < To avoid damaging the speakers by a sudden high-level signal, be sure to switch the power off before connecting the speakers. < Check the impedance of your speakers. Connect speaker with an impedance of 6 ohms or more. < The amplifier’s red speaker terminals are t ...

  • Teac CR-H255 - page 7

    7 C LINE OUT LINE IN R L R L Cassette Deck MD, CD-R, etc. R L R L LINE OUT L R VCR, DVD, etc. LINE OUT DIGITAL IN (OPTICAL) LINE IN E D AC Power Cord Plug this AC power cord into an AC wall socket. E T APE/AUX jacks Make sure to connect: white plug q white jack (L: left channel) red plug q red jack (R: right channel) < Be sure to insert each plu ...

  • Teac CR-H255 - page 8

    8 Connecting Antennas (AM/FM) < If the AM loop antenna provided does not deliver sufficient reception (often due to being too far from the transmitter or in a concrete building, etc.), it may be necessary to use an outdoor AM antenna. Use either a high quality commercial AM antenna or, if not available, an insulated wire more than 5 m long, stri ...

  • Teac CR-H255 - page 9

    9 Connecting Antennas (DAB) DAB Indoor Antenna Connect the T-type DAB antenna to the DAB socket, extend the lead vertically and attach it to a window frame or wall with thumbtacks, or the like, where reception is best. < You can check the antenna adjustment or positioning for the best reception by viewing the signal strength on the display. The ...

  • Teac CR-H255 - page 10

    10 Names of Each Control 1 Q P O N M L K J I H G F B A E C D Remote Sensor When operating the remote control unit, point it towards the remote sensor. Display Disc tray OPEN/CLOSE ( L ), TUNING MODE, ENTER In CD mode, use this button to open and close the disc tray. In FM or AM mode, use this button to select the tuning mode. In DAB mode, use this ...

  • Teac CR-H255 - page 11

    11 STOP ( H ), INFO, RDS MODE, CLEAR In CD mode or USB mode, use this button to stop playback. In DAB mode, this button is used to change the text content on the second line of the display, to show DLS (Dynamic Label Segment, info text supplied by each radio station), Programme type (classification given by the radio station i.e.: Pop music or Rock ...

  • Teac CR-H255 - page 12

    Names of Each Control 2 STANDBY/ON Press this button to turn the unit on or standby. FILE ( b , 5 ) Use these buttons to select a file of MP3/WMA. FOLDER ( b , 5 ) Use these buttons to select a folder of MP3/WMA. PRESET ( b , 5 ) In TUNER mode, use these buttons to select the preset stations. MEMORY In TUNER mode, press this button to put the prese ...

  • Teac CR-H255 - page 13

    CLEAR Use this button to clear a program. In the USB mode, use this button to delete recorded files. SLEEP Use this button to set the sleep timer. Input selector Use these buttons to select a source. PAUSE ( J ) In CD mode or USB mode, use this button to pause playback. PLAY ( y ) In CD mode or USB mode, use this button to start playback. SKIP ( . ...

  • Teac CR-H255 - page 14

    14 B A How to select SOURCE Every time the SOURCE button is pressed, the mode is changed as follows: A Basic Operation Adjust the volume To protect speakers from a sudden high-level signal, gradually turn up the volume to the required level with the VOLUME knob. B Muting To cut the sound temporarily, press the MUTING button. To cancel muting, press ...

  • Teac CR-H255 - page 15

    Bass control This control is used for adjusting the level of the low frequency sound range. Treble control This control is used for adjusting the level of the high frequency sound range. Balance control This control is used for adjusting balance of the volume level between the left and right channels. Dimmer control This control can be used to dim ...

  • Teac CR-H255 - page 16

    16 Listening to CD/MP3/WMA (discs) Press the OPEN/CLOSE button ( L ). 2 Place a disc on a tray with the printed surface up. 3 Press the OPEN/CLOSE button ( L ) to close the tray. 4 Press the PLAY button ( G ). Playback starts from the first track/file. 5 Press the SOURCE button repeatedly to select ‘CD’. ‘No Disc’ will be displayed if no di ...

  • Teac CR-H255 - page 17

    17 Listening to a USB device 2 1 3 Search 1 3 2 4 You can play MP3/WMA files by connecting various external USB storage devices such as USB flash memory. Select USB function by pressing the SOURCE button repeatedly. ‘Not connected’ will be displayed if no USB device is connected. Connect the external USB storage device to the unit. When an HDD ...

  • Teac CR-H255 - page 18

    18 To stop playback Press the STOP button ( H ) to stop playback. A A B C D To suspend playback temporarily (pause mode) Press the PAUSE button ( J ). Playback stops at the current position. To resume playback, press the PLAY button ( G ) or PAUSE button ( J ). B To skip to the next or a previous track/file Press the .m or ,/ button several times u ...

  • Teac CR-H255 - page 19

    19 Repeat Playback Repeat A-B This function allows repeat playback of any desired portion of the disc. Designate the point at which repeat playback should start by pressing the A-B button. ‘Repeat A-’ lights up and ‘B’ blinks. When the point at which repeat playback should end is reached, press the A-B button again. ‘Repeat A-B’ lights ...

  • Teac CR-H255 - page 20

    20 Programmed Playback Press the PROGRAM button in the stop mode. 1 Select the desired track or file by pressing the . or / button and press the PROGRAM button to enter. 2 Repeat this step to store other tracks. < If you attempt to program more than 32 tracks or files, ‘P-FULL’ is displayed and no more can be programmed. < This function a ...

  • Teac CR-H255 - page 21

    To clear the program 1. In the stop mode, press the PROGRAM button. 2. Hold down the CLEAR button for more than 4 seconds. < If the OPEN/CLOSE button ( L ) is pressed, the programmed contents will also be cleared. To add a track/file to the program In the stop mode, press the PROGRAM button repeatedly until the program number you want to insert ...

  • Teac CR-H255 - page 22

    elapsed time of the current track remaining time of the current track 22 Time Display When playing back an audio CD, each time the TIME button is pressed the display changes as follows: Display During MP3/WMA playback, press the DISPLAY button repeatedly to change what information is displayed. Default display (scrolling): Song Title Artist Name Al ...

  • Teac CR-H255 - page 23

    23 Before Recor ding Setting the Record Mode 2 1 3 You can select the desired record mode. In USB mode, press the REC MODE button. 1 This unit can record musics from CDs, cassette tapes and radio, on USB memory devices, as MP3 or WMA files. CAUTION < Do not disconnect the USB storage device during recording. Do not disconnect the power cord duri ...

  • Teac CR-H255 - page 24

    Recording to USB 1 2 3 You can record a source of CD, MP3/WMA disc, cassette tape, radio broadcast and external device to the external USB storage device as MP3/WMA files. Connect the external USB storage device to the USB port on the front panel of the unit. Press the RECORD button and recording starts. 2 1 Delete a file from USB 2 4 5 1 3 In the ...

  • Teac CR-H255 - page 25

    25 The following screen will display for 2 seconds. The unit will scan for broadcast services in the local area and add them to the channel list as they are found. The scan should take about 10 seconds. As channels are added to the channel list the number of channels found is displayed. After broadcast services have been found the channels are list ...

  • Teac CR-H255 - page 26

    26 < To display the signal strength of a channel, press the ENTER button. The signal strength is displayed. Press the ENTER button once again to cancel the signal strength display. < Channels are displayed in alphanumeric order in the channel list, with numbers coming first. So, stations such as 6 Music from the BBC will be listed early in th ...

  • Teac CR-H255 - page 27

    27 Using Function Control 1 In DAB mode, use Function Control to set system options. There are four options in the function control: Station order, Preset tune, DRC value and Manual tune. Station order Use station order to set the order in which stations are listed. There are three orders: Favourite, Alphanumeric and Active. While listening to a DA ...

  • Teac CR-H255 - page 28

    28 Using Function Control 2 Preset tune Use this option to select the DAB preset station. While listening to a DAB broadcast press the FUNCTION/FM MODE button. 1 The currently tuned station is displayed. Press the TUNING/PRESET/TIME button until the desired preset station is displayed. 4 Press the ENTER button to select the preset station. 5 Press ...

  • Teac CR-H255 - page 29

    29 Press the TUNING/PRESET/TIME button until the desired level of DRC is displayed in the second line of the display. 4 Press the ENTER button. 5 Manual tune This option allows you to manually tune in a channel and view a continuously updated display of the strength of the signal. This may be useful when adjusting or positioning an antenna for bett ...

  • Teac CR-H255 - page 30

    30 You can choose the type of information displayed in the second line of the display while listening to a DAB channel. Each time the INFO/RDS MODE button is pressed, the information is displayed as follows. Multiplex name This displays the name of the Mulitplex that is broadcasting the programme. Programme type This is a description of the type of ...

  • Teac CR-H255 - page 31

    31 Sw version (Software version) This displays the version number of the installed software. Sig error rate (Signal error rate) This displays the digital bit error rate (0-99) of the currently tuned channel. The lower the figure the better the quality of the received broadcast. Bitrate mode This displays the bitrate of the current playing broadcast ...

  • Teac CR-H255 - page 32

    32 Listening to FM/AM Selecting stations which cannot be tuned automatically (Manual tune) Select ‘Manual tune’ in step . Repeatedly press the TUNING/PRESET/TIME button until the station you want to listen to is found. Or hold down the TUNING/PRESET/TIME button until the station you want to listen to is found and release the button. FM: 50 kHz ...

  • Teac CR-H255 - page 33

    FM or AM DAB ‘CH01’ or ‘01’ blinks on the display. 33 Preset T uning 1 You can store up to 30 FM, 30 AM and 10 DAB stations. Preset Manually (FM/AM/DAB) Select DAB, AM or FM by pressing the BAND button. 1 1 1 4 5 2 4 3 Tune the station you would like to store. Press the MEMORY button. 3 2 Within 4 seconds, select the preset you would like t ...

  • Teac CR-H255 - page 34

    34 Preset T uning 2 1 2 3 < Preset channels can also be selected by the PRESET ( b / 5 ) buttons or the numeric buttons of the remote control. < When you use the numeric buttons, press the input selector button of the remote control first. < When using the remote control, you can skip step . 2 Select a preset channel. Press the TUNING/PRES ...

  • Teac CR-H255 - page 35

    35 RDS The Radio Data System (RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. RDS works on the FM waveband in Europe only. Tune in an FM station (see steps to of page 32). Press the INFO/RDS MODE button. Each time the RDS MODE button is pressed briefly, the RDS mode ...

  • Teac CR-H255 - page 36

    36 1 2 4 3 5 PTY Search You can search for stations by programme type. Select FM by pressing the BAND button. 1 Press the INFO/RDS MODE button for more than 3 seconds. 2 Select the desired PTY programme using the TUNING/PRESET/TIME buttons. 3 Select your desired one from among 31 kinds of PTY programmes. The programme type will blink. Press the ENT ...

  • Teac CR-H255 - page 37

    News: brief announcements, events, public opinion, reports, actual situations. Current Affairs: a kind of suggestion including practical announcements other than news, documents, discussion, analysis and so on. Information: daily information or reference such as weather forecast, consumer guide, medical assistance and so on. Sport: sports related p ...

  • Teac CR-H255 - page 38

    38 Every time the TIME MODE button is pressed, the mode is changed as follows. < The unit uses the 24-hour ‘military’ clock. < When no action is taken for 1 minute, the time adjust mode will be cancelled. < Press the STOP button to cancel the time setting. Press the TUNING/PRESET/TIME buttons to set the current hour. 2 Press the ENTER ...

  • Teac CR-H255 - page 39

    39 ENTER TUNING/PRESET/ TIME TIME MODE STANDBY/ON Setting the Timer < Adjust the clock before setting the timer. < When no action is taken for 1 minute, the timer setting mode will be cancelled. Press the TIME MODE button repeatedly until ‘On time’ is displayed. 1 The ‘minute’ value blinks. Press the TUNING/PRESET/TIME buttons to set ...

  • Teac CR-H255 - page 40

    40 Sleep Timer The power can be switched off after a specified amount of time. Press the SLEEP button repeatedly until desired time appears on the display. SLEEP-90 (80, 70 ... 10) The power will be switched off 90 (80, 70 ... 10) minutes later. (normal display) The sleep timer is off. < The display is dimmed when you set the sleep timer. < I ...

  • Teac CR-H255 - page 41

    41 Specifications GENERAL Power Requirements . . . . . . . . . . 230 V AC, 50 Hz Power Consumption . . . . . . . . . . . . . . . . . . . 75 W (standby) . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 W Dimension (W x H x D) . . . . . .215 x 110 x 359 mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.4 kg Standard Accessor ...

  • Teac CR-H255 - page 42

    42 Tr oubleshooting Amplifier No power e Check the connection to the AC power supply. No sound from speakers. e Check the connection to the speakers. e Adjust the volume. e Select proper source. e Pull out the headphone plug from PHONES jack. e If muting is on, press the MUTING button. The sound is noisy. e The unit is too close to a TV set or simi ...

  • Teac CR-H255 - page 43

    43 CD Player Cannot play. e Load a disc with label side up. e If the disc is dirty, clean the surface of the disc. e A blank disc has been loaded. Load a prerecorded disc. e Unfinalized CD-R/CD-RW disc is not playable. Finalize the disc properly. Sound skips. e Place the unit on a stable place to avoid vibration and shock. e If the disc is dirty, c ...

  • Teac CR-H255 - page 44

    0905 . MA-1008A Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 ...

Manufacturer Teac Category Car Satellite TV System

Documents that we receive from a manufacturer of a Teac CR-H255 can be divided into several groups. They are, among others:
- Teac technical drawings
- CR-H255 manuals
- Teac product data sheets
- information booklets
- or energy labels Teac CR-H255
All of them are important, but the most important information from the point of view of use of the device are in the user manual Teac CR-H255.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Teac CR-H255, service manual, brief instructions and user manuals Teac CR-H255. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Teac CR-H255.

Similar manuals

A complete manual for the device Teac CR-H255, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Teac CR-H255 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Teac CR-H255.

A complete Teac manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Teac CR-H255 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Teac CR-H255, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Teac CR-H255, that we can find in the current document
3. Tips how to use the basic functions of the device Teac CR-H255 - which should help us in our first steps of using Teac CR-H255
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Teac CR-H255
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Teac CR-H255 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Teac CR-H255?

Use the form below

If you did not solve your problem by using a manual Teac CR-H255, ask a question using the form below. If a user had a similar problem with Teac CR-H255 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)