English dropdown-ico

Manual Vector VEC012B

16 pages 0.8 mb
Download

Go to site of 16

Summary
  • Vector VEC012B - page 1

    OWNER’S MANUAL AND W ARRANTY INFORMA TION THIS MANUAL CONT AINS IMPORT ANT INFORMA TION REGARDING SAFETY , OPERA TION, MAINTENANCE AND STORAGE OF THIS PRODUCT . READ CAREFULL Y BEFORE USE, AND RET AIN FOR FUTURE REFERENCE. 4140 S.W . 28th W ay , Ft. Lauderdale, FL 33312 T oll Free: (866) 584-5504 IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR VECTO ...

  • Vector VEC012B - page 2

    1 IMPORT ANT SAFETY INSTRUCTIONS W ARNING - RISK OF EXPLOSIVE GASES 1. WORKING IN VICINITY OF A LEAD-ACID BA TTER Y IS DANGEROUS. BA TTERIES GENERA TE EXPLOSIVE GASES DURING NORMAL BA TTERY OPERA TION. FOR THIS REASON, IT IS OF UTMOST IMPORT ANCE THA T EACH TIME BEFORE USING YOUR CHARGER, YOU READ THIS MANUAL AND FOLLOW THE INSTRUCTIONS EXACTL Y . ...

  • Vector VEC012B - page 3

    2 7. Do not disassemble charger; take it to a qualified ser vice technician when ser v- ice or repair is required. Incorrect reassembly may result in a risk of electric shock or fire and will void warranty . 8. T o reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. T urning off controls will not ...

  • Vector VEC012B - page 4

    AC POWER CORD CONNECTION This charger is equipped for use with an extension cord. The extension cord must be first connected to the charger’ s polarized plug. Only then should the extension cord be plugged into a properly installed 110/120V AC outlet in accordance with all local codes and ordinances. This batter y charger plug is for use with 110 ...

  • Vector VEC012B - page 5

    SMAR T BA TTER Y CHARGER The charger portion of the system is microprocessor-based and has three charge rate set- tings, controlled by one switch. (See Figure 1). 1. Stage One- Rapid Star t Charge - delivers maximum charging amperage to “wake up” any ser viceable 12 volt batter y . When batter y reaches a maximum safe prede- termined voltage, t ...

  • Vector VEC012B - page 6

    5 PREP ARING TO CHARGE 1. Deter mine voltage of battery by referring to car owner's manual. 2. If it is necessar y to remove batter y from vehicle to charge, or to clean terminals, always remove grounded terminal from batter y first. Make sure all accessories in the vehicle are off, so as not to cause an arc. 3. Clean batter y terminals. Be ca ...

  • Vector VEC012B - page 7

    6 5. For negative grounded vehicle, connect POSITIVE (RED) clamp from batter y charger to POSITIVE (POS, P , +) post of batter y . Connect NEGA TIVE (BLACK) clamp to vehicle chassis or engine block away from the batter y . Do not connect clip to carburetor , fuel lines, or sheet metal body parts. Connect to heavy gauge metal part of frame or engine ...

  • Vector VEC012B - page 8

    7 5. Carefully connect Negative (BLACK) charger clamp to the free end of the bat- ter y cable connected to the negative terminal. Connect the charger's power cord to a grounded 110/120V AC power outlet. 6. Set charger's charge rate to appropriate setting according to batter y size. 7. When charging is complete, disconnect cables and clamp ...

  • Vector VEC012B - page 9

    8 CHARGING TIMES The Charger will automatically adjust the charge rate as the batter y charges and stops charging when the batter y is fully charged. If you require some estimate of the time it takes to charge a batter y refer to the chart below . PERCENT OF CHARGE 75% 50% 25% 0% 2 AMPS 7 HRS 13 HRS NR* NR* 4 AMPS 3.5 HRS 6 HRS 9 HRS 12 HRS 6 AMPS ...

  • Vector VEC012B - page 10

    Tr y charging another batter y , if the F AUL T LED does not light, then one of the above problems exists with the initial batter y . Charger will not charge and the fan will not operate if there is a fault. Call V ector T echnical Support toll free: (866) 584-5504. SULF A TED BA TTER Y Batteries left in a discharged state for a long period of time ...

  • Vector VEC012B - page 11

    CHARGER CONTROLS AND INDICA TORS Figure 3 shows the charger control panel of the Jump ‘n Charge system , and consists of: Digital Display - Displays F F U U L L when batter y is fully charged, and displays the Fault Codes listed on page 9. Polarized Plug - use with most household extension cords. 2/4/6 Amp pushbutton - Selects 2/4/or 6 amps . ON/ ...

  • Vector VEC012B - page 12

    11 AL W A YS RECYCLE PRBA PRBA W ARNING • Do not dispose of the batter y in fire as this may result in an explosion • Before disposing of the batter y , protect exposed terminals with heavy-duty electrical tape to prevent shorting (shor ting can result in injur y or fire) • Do not expose batter y to fire or intense heat as it may explode Batt ...

  • Vector VEC012B - page 13

    READ AND OBSER VE ALL CAUTIONS AND W ARNINGS STEP-BY -STEP JUMP-ST ARTING INSTRUCTIONS This Jump ‘n Charge system is equipped with an automatic ON/OFF function that only allows Jump ‘n Charge energy to flow when proper connections are made to the batter y and frame. The automatic ON/OFF function works in conjunction with an audible reverse pola ...

  • Vector VEC012B - page 14

    13 W ARNING: • Always disconnect the engine or frame jumper clamp first; followed by the batter y jumper clamp. • There is a risk of explosive gases being released when batteries are charged or discharged. Failure to follow instructions may cause property damage, explo- sive hazard, and/or personal injur y . CHARGING/RECHARGING For maximum batt ...

  • Vector VEC012B - page 15

    14 OPERA TION AS A 12 VOL T DC PORT ABLE POWER SUPPL Y The 12 volt DC outlet provides 15 amps maximum current for 12 volt DC operat- ed appliances. 1. Lift up the cover of the unit’ s 12 volt DC accessor y outlet (See Figure 2). 2. Insert the 12 volt DC plug from the appliance into the outlet on the unit. 3. Switch on the appliance, and operate a ...

  • Vector VEC012B - page 16

    15 2 YEAR LIMITED W ARRANTY PROGRAM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of V ector Manufacturing, Ltd., regarding this product. There is no other warranty , other than those described herein. This V ector Manufacturing, Ltd. product is warranted, to the original purc ...

Manufacturer Vector Category Portable Generator

Documents that we receive from a manufacturer of a Vector VEC012B can be divided into several groups. They are, among others:
- Vector technical drawings
- VEC012B manuals
- Vector product data sheets
- information booklets
- or energy labels Vector VEC012B
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vector VEC012B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vector VEC012B, service manual, brief instructions and user manuals Vector VEC012B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vector VEC012B.

Similar manuals

A complete manual for the device Vector VEC012B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vector VEC012B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vector VEC012B.

A complete Vector manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vector VEC012B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vector VEC012B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vector VEC012B, that we can find in the current document
3. Tips how to use the basic functions of the device Vector VEC012B - which should help us in our first steps of using Vector VEC012B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vector VEC012B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vector VEC012B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vector VEC012B?

Use the form below

If you did not solve your problem by using a manual Vector VEC012B, ask a question using the form below. If a user had a similar problem with Vector VEC012B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)