English dropdown-ico

Manual Vizio 210C

195 pages 3.98 mb
Download

Go to site of 195

Summary
  • Vizio 210C - page 1

    OPERA T OR'S MANU AL FOR COPYING FUNCTIONS DIGIT AL COLOUR PLAIN P APER COPIER ...

  • Vizio 210C - page 2

    2 T rademarks: Fiery is a trademar k registered in the U .S.P atent and T r ademar k Office . Fiery Scan, Command WorkStation, WebSpooler are trademarks of Electronics For Imaging, Inc. How to affix the PM labels W ARNING: Changes or modification made to this equipment, not e xpressly approv ed by T oshiba TEC or par ties author ized by T oshiba TE ...

  • Vizio 210C - page 3

    1 2 3 4 5 6 7 8 9 10 11 12 1 T OSHIB A Q U ALITY IS SECOND T O NONE Supplies / Parts Dependability Genuine T oshiba supplies are subjected to the strictest of inspections so that e very supply you receiv e will perform at optimal le vels . High Productivity Genuine T oshiba supplies are created to meet the demands of our competitiv e world and prov ...

  • Vizio 210C - page 4

    1 2 3 4 5 6 7 8 9 10 11 12 2 General ISO 9000 and ISO 14000 T oshiba toner plants are ISO 9001 or ISO 9002 and ISO 14001 cer tified. Theref ore quality of craftsmanship and en vironmental friendly production are guaranteed from the f actory . Service and Support Benefits T oshiba´s Ser vice engineers are cer tified to k eep your copier perf orming ...

  • Vizio 210C - page 5

    1 2 3 4 5 6 7 8 9 10 11 12 3 PREF A CE Thank you f or purchasing the T oshiba Digital Colour Copier e-STUDIO210c/310c. This Operator’ s Manual describes the following: • how to use the digital colour copier • how to inspect and carry out maintenance on the digital copier • how to remedy mechanical and copying problems The Colour Guidebook i ...

  • Vizio 210C - page 6

    1 2 3 4 5 6 7 8 9 10 11 12 4 PREF A CE (Cont.) Features of the e-STUDIO210c/310c The e-STUDIO210c/310c is a digital colour copier employing a 4-step tandem copy process, which is capable of high-speed full-colour cop ying. The e-STUDIO210c/310c incor porates a displa y with a touch panel and menu keys that graphically represent copier functions. As ...

  • Vizio 210C - page 7

    1 2 3 4 5 6 7 8 9 10 11 12 5 T oshiba quality is second to none .............................................................................................. ........ 1 Preface ........................................................................................................................ ........................ 3 Features of the e-STUDIO ...

  • Vizio 210C - page 8

    1 2 3 4 5 6 7 8 9 10 11 12 6 4 . Colour editing and adjustment ................................................................................................ ....... 4-1 1. Monocolour copying .......................................................................................................... ............ 4-2 2. Hue adjustment .............. ...

  • Vizio 210C - page 9

    1 2 3 4 5 6 7 8 9 10 11 12 7 11.Specifications & Options ........................................................................................................... 11-1 1 . e-STUDIO210c/310c specifications ........................................................................................... 11 -2 2 . Specifications of options ........... ...

  • Vizio 210C - page 10

    1 2 3 4 5 6 7 8 9 10 11 12 8 PRECA UTIONS 1. Installation 1 The e-STUDIO210c/310c should be installed by a qualified service technician. Note: The packing material should be disposed of proper ly . 2 T o obtain the best possible results, this copier should be used in conjunction with a dedicated A C power line at the following ratings. 220–240V , ...

  • Vizio 210C - page 11

    1 2 3 4 5 6 7 8 9 10 11 12 9 1 Handle and use the copier gently and carefully . • Do not place anything on the paper cassettes or the or iginal f eeding tra y . • Never allow the power cable to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur . • Do not allow any metal items such as paper ...

  • Vizio 210C - page 12

    1 2 3 4 5 6 7 8 9 10 11 12 10 2. General Precautions (Cont.) PRECA UTIONS (Cont.) Cop ying Prohibition Label W arning for high temperature areas W arning Label Explanator y Label CLASS 1 LASER PRODUCT APP AREIL A LASER DE CLASSE 1 LASER KLASSE 1 PRODUCTO DE LASER DE CLASE 1 > PS < VORSICHT - LASERSTRAHLUNG, WENN DIE ABDECKUNG GEOFFNET ODER DI ...

  • Vizio 210C - page 13

    1 2 3 4 5 6 7 8 9 10 11 12 11 Fixing the adjusters (stoppers) There are two adjusters (stoppers) located in the front bot- tom par t of the copier . After moving/installing the copier , be sure to turn the adjusters clockwise to fix them firmly on the ground. *T o unlock the adjusters when moving the copier , tur n them anticlockwise. If the copier ...

  • Vizio 210C - page 14

    1 2 3 4 5 6 7 8 9 10 11 12 12 FORGER Y PREVENTION FUNCTION/ ST ORA GE OF COLOUR COPIES This copier has a f orgery prev ention function. Please ensure that your digital full-colour copier is not used for making copies of prohibited items. FORGER Y PREVENTION FUNCTION (1) The copies should be kept in a place which is not exposed to light to pre vent ...

  • Vizio 210C - page 15

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 1. BEFORE MAKING COPIES 1. Description of the digital colour copier and the optional equipment ...... 1-2 - Main components .......................................................................................... 1 - 2 - Optional equipment ............................................................................. ...

  • Vizio 210C - page 16

    1 2 3 4 5 6 7 8 9 10 11 12 1-2 BEFORE MAKING COPIES 1. DESCRIPTION OF THE DIGIT AL COLOUR COPIER AND THE OPTIONAL EQUIPMENT Main Components Original cover (Optional) Original glass Key copy counter slot P ower switch Bypass guide Feed side cover Paper size indicator Original scales Control panel Cassettes*1 T ransfer belt unit Fuser unit Operator? ...

  • Vizio 210C - page 17

    1 2 3 4 5 6 7 8 9 10 11 12 1-3 Optional Equipment Key Copy Counter Records (or accumulates) the number of copies made b y each person or group separately . Reversing Automatic Document Feeder Automatically feeds a placed stack of originals one by one to have them copied. Automatic Duplexer This reverses the copies in order to make duplex copies. Op ...

  • Vizio 210C - page 18

    1 2 3 4 5 6 7 8 9 10 11 12 1-4 BEFORE MAKING COPIES HELP TIMER lamp The TIMER lamp lights when the timer is being used. HELP key When this key is pressed, the appropriate operation procedures are displayed. PRINTER/NETWORK key If you have a printing and scanning option (printer controller) installed, press this key to switch between the printer/sca ...

  • Vizio 210C - page 19

    1 2 3 4 5 6 7 8 9 10 11 12 1-5 If you press the PRINTER/NETWORK key when the optional printer controller is installed, the PRINT ke y is displa yed on the touch panel ( P age 8-2). Press this ke y if y ou want to star t printing immediately after copying has been finished. (If it is not pressed, printing automatically star ts in 45 seconds.) ACCESS ...

  • Vizio 210C - page 20

    1 2 3 4 5 6 7 8 9 10 11 12 1-6 BEFORE MAKING COPIES The following information is shown on the touch panel: Copier status, oper ational instructions, cautionar y messages, reproduction ratios , total copy quantity , paper type and colour modes. 1. DESCRIPTION OF THE DIGIT AL COLOUR COPIER AND THE OPTIONAL EQUIPMENT (Cont.) T ouch P anel Function set ...

  • Vizio 210C - page 21

    1 2 3 4 5 6 7 8 9 10 11 12 1-7 - Set functions confirmation key This ke y allows y ou to confir m the functions that ha ve been set. (The display shown on the right is an e xample.) Clearing the Functions Selected The icons displayed on the screen are as follows(some icons may not appear on the screen): If you press an y ke y that is half-tone shad ...

  • Vizio 210C - page 22

    1 2 3 4 5 6 7 8 9 10 11 12 1-8 BEFORE MAKING COPIES 2. TURNING ON THE PO WER SWITCH 2 About 4 minutes later , the copier will become ready for copying. - This message appears on the message panel: READ Y 1 T urn ON the po wer switch. - This message appears on the message panel of the Basic Screen: W ait W ar ming Up While the copier is warming up, ...

  • Vizio 210C - page 23

    1 2 3 4 5 6 7 8 9 10 11 12 1-9 If the following message remains displayed, Enter access code the access code y ou have entered ma y be incorrect. Ke y in the correct code. If the depar tment control function is in use, be sure to press the A CCESS CODE ke y on the control panel after finishing copying. The displa y returns to the access code input ...

  • Vizio 210C - page 24

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 0 BEFORE MAKING COPIES  When the optional ke y cop y counter is av ailable, y ou can only make copies by inser ting y our ke y copy counter . When you mak e copies with your k e y copy counter inserted, the number of copies made is re- corded (or added up) in your counter . Any n umber of ke y cop y counters can be ...

  • Vizio 210C - page 25

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 1 3. ENERGY-SA VING FUNCTIONS Off-mode (Base model) The power switch of the copier automatically shuts off when the copier is not being used for a specified period of time. The default setting is “ OFF ” , ho we ver , the per iod of time until the switch is turned OFF is selectable betw een 3 and 240 minutes on th ...

  • Vizio 210C - page 26

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 2 BEFORE MAKING COPIES ...

  • Vizio 210C - page 27

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 2. HO W T O MAKE COPIES 1. General copying procedures ...................................................... 2-2 2. Setting copy paper ..................................................................... 2-4 - Acceptable copy paper types and sizes ....................................................... 2 - 4 - Recomm ...

  • Vizio 210C - page 28

    1 2 3 4 5 6 7 8 9 10 11 12 2-2 HO W TO MAKE COPIES 3 Select the copy modes ( in the illustration on the page on the right) . - Use the colour mode selection ke y , the touch panel and the digital keys. - Any copy modes cannot be changed after the ST ART k ey is pressed (including the case when originals are divided into multiple sets when fed). - S ...

  • Vizio 210C - page 29

    1 2 3 4 5 6 7 8 9 10 11 12 2-3 HELP 1 1 2 1 T o make multiple sets of copies: - Key in the copy quantity with the digital keys. - T o correct the input cop y quantity , press the c CLEAR ke y . When paper of the same size as the original has run out: The corresponding cassette key on the touch panel flashes. Add paper or select another cassette. T ...

  • Vizio 210C - page 30

    1 2 3 4 5 6 7 8 9 10 11 12 2-4 HO W TO MAKE COPIES Feeder Cassettes (optional Cassette Module included) Plain paper (80~105g/m 2 ) THICK1 ( 106~163 g/m 2 ) THICK2 ( 164~209 g/m 2 ) 2. SETTING COPY P APER Acceptable Cop y P aper T ypes and Sizes OHP film THICK3 ( 210~256 g/m 2 ) Thin paper (64~79g/m 2 ) 250 sheets( 120 g/m 2 ) 250 sheets( 160 g/m 2 ...

  • Vizio 210C - page 31

    1 2 3 4 5 6 7 8 9 10 11 12 2-5 (200g/m 2 ) A3,A4 THICK 2 Pay attention to the following points: - Avoid using paper that is specially treated or paper that was printed on another machine, and also avoid performing double copying on the same side of paper; this may cause a malfunction. - Do not use paper with creases , wr inkles or prone to curling, ...

  • Vizio 210C - page 32

    1 2 3 4 5 6 7 8 9 10 11 12 2-6 HO W TO MAKE COPIES The paper size of the cassettes of the copier can be changed. The cassettes can also be set f or THIN, THICK1 paper or OHP films. * Bypass copying Page 6-5 1 Pull out the cassette toward you. 2 Push the lever of the side guides in the direction of the arro w, and set the side guides at the desired ...

  • Vizio 210C - page 33

    1 2 3 4 5 6 7 8 9 10 11 12 2-7 For changing the paper size in the cassette, follow steps 1 to 9 on the previous page, then go to step 3 on the next page. For types of copy paper that can be set in the cassette Page 2-4 8 Press the cassette key corresponding to that in which the paper size has been changed. Setting the Cassette for THIN/THICK1/OHP F ...

  • Vizio 210C - page 34

    1 2 3 4 5 6 7 8 9 10 11 12 2-8 HO W TO MAKE COPIES 4 The setting is completed. - The paper type that has been set is displayed on the top right of the screen. P age 1-6 - When thick paper is set Clearing the Cassette for THIN/THICK1/OHP Film Press the THICK1 paper (or THIN paper or OHP films) cassette key , then press the THICK1 (or THIN or OHP ) k ...

  • Vizio 210C - page 35

    1 2 3 4 5 6 7 8 9 10 11 12 2-9 3. SETTING ORIGINALS Acceptable Original T ypes and Sizes Maximum Number of Sheets that Can be Set in the Reversing Automaic Document Feeder (optional) Sizes of originals A4, A4-R, A5-R, B5, B5-R, L T , L T -R, ST -R B4, FOLIO, LG, COMP A3, LD Paper weight 64~90g/m 2 50 sheets 35 sheets 25 sheets 91~105g/m 2 40 sheets ...

  • Vizio 210C - page 36

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 0 HOW TO MAKE COPIES 3. SETTING ORIGINALS (Cont.) Book-type Originals 1 Raising the original cover or the reversing auto- matic document feeder (optional), place the origi- nal in the direction shown in the illustration. - When using the Book-T ype Originals 2-sided Copies ( Page 3-11) or the Dual-Page ( Page 5-6) fun ...

  • Vizio 210C - page 37

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 1 Precautions for Using the Reversing Automatic Document Feeder (optional) Also, the following originals should be handled carefully: (1) Folded or curled originals should be smoothed out before being used. ( 2) Only originals with the same width can be set at a time. (Do not mix or iginals with different widths.) (3 ...

  • Vizio 210C - page 38

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 2 HOW TO MAKE COPIES In the Continuous Feed Mode P age 6-2 1 After aligning the edges of originals well, place them face up and align the slides to the width of the origi- nals. - One original sheet is also acceptable. - Maximum number of originals that can be set Page 2-9 3. SETTING ORIGINALS (Cont.) - For setting la ...

  • Vizio 210C - page 39

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 3 In the Single-feed Mode P age 6-3 1 Align the slides to the desired original size. 2 Insert the original face up and straight along the slides; it will then be pulled in automaticall y . - When the original starts being pulled in, let go of it. Slide ...

  • Vizio 210C - page 40

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 4 HOW TO MAKE COPIES 4. A UT O JOB ST AR T (JOB PRESET) While the copier is warming up (when the power switch is just turned on,etc.), you can preset the copy modes. Cop ying operation star ts when warming up has been completed. 2 Place the original(s). Page 2-9 Select copy modes as required. 3 Press the ST ART key . ...

  • Vizio 210C - page 41

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 5 Y ou can preset the next copy modes during a cop y run. Y ou cannot preset the next cop y modes during the scanning of the or iginals. During Copying 2 Press the JOB PRESET key during a copy run. 1 Place the original(s). P age 2-9 - The following message appears: JOB PRESETTING Select other copy modes as required. 3 ...

  • Vizio 210C - page 42

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 6 HOW TO MAKE COPIES After the copying has been finished, press the PRINTER/ NETWORK k ey on the control panel. The pr inting mode will be resumed. 2 Press the COPY JOB REQUEST key during print- ing. - The screen on the right appears during printing. If you press the COPY JOB REQUEST ke y , preset copying be- comes av ...

  • Vizio 210C - page 43

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 7 5. INTERRUPT COPYING While multicopying is in progress, you can interrupt it and make copies from different originals. Only sheets that have already been set (in the cassette, optional large-capacity feeder or sheet bypass) are available in interrupt copying. *The following functions are not available: - duplex - bo ...

  • Vizio 210C - page 44

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 8 HOW TO MAKE COPIES 6. CANCELLING/RESUMING A COPY OPERA TION Y ou can suspend or cancel a copy operation during multicop ying including scanning, or resume the sus- pended copy operation. Suspending a Copy Operation Press the ST OP key on the contr ol panel during copying. After Suspending a Copy Operation T o cancel ...

  • Vizio 210C - page 45

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 3. SETTING OF B ASIC COPY MODES 1. P aper selection .......................................................................... 3-2 - Automatic paper selection (APS) ................................................................... 3 - 2 - Manual paper selection ....................................................... ...

  • Vizio 210C - page 46

    1 2 3 4 5 6 7 8 9 10 11 12 3-2 SETTING OF BASIC COPY MODES - If the Automatic Paper Selection mode is not selected, press the ZOOM··· ke y , then press the APS k ey on the ne xt screen. 1 Place paper in the cassette(s). P age 2-4 - If the following messages are shown, proceed the indications as you are told to: Change direction of original Set c ...

  • Vizio 210C - page 47

    1 2 3 4 5 6 7 8 9 10 11 12 3-3 1 Place paper in the cassette(s). P age 2-4 - When using this mode in bypass cop ying ( P age 6-5), be sure to specify the paper size. - Or press the ZOOM··· key to enter the next screen, and press the key of the desired paper size. - OTHER key Page 6-15 Select other copy modes as required. 4 Press the ST ART key . ...

  • Vizio 210C - page 48

    1 2 3 4 5 6 7 8 9 10 11 12 3-4 SETTING OF BASIC COPY MODES 2 Press the desired cassette, then the ZOOM··· key . - The copy paper size is selectable on the screen in step 3 as well. Automatic Magnification Selection (AMS) 1 Place paper in the cassette(s). P age 2-4 3 Press the AMS key . - O THER ke y P age 6-15 4 Place the original(s). Page 2-9 - ...

  • Vizio 210C - page 49

    1 2 3 4 5 6 7 8 9 10 11 12 3-5 Select other copy modes as required. 5 Press the ST ART key . 4 Press the ORIGINAL SIZE key of the same size as the original. - Using the original size and copy size, the correct reproduc- tion ratio is computed and displayed on the screen. - OTHER key Page 6-15 Specifying both Original Size and Copy Size 1 Place pape ...

  • Vizio 210C - page 50

    1 2 3 4 5 6 7 8 9 10 11 12 3-6 SETTING OF BASIC COPY MODES 2 Place the original(s). P age 2-9 3 Press the cassette icon representing the desired copy paper size, then press the ZOOM ···· k e y . - The copy paper size is selectable on the screen in step 4 as well. 4 Press the UP (or DO WN ) key to set the de- sired reproduction ratio. - Each tim ...

  • Vizio 210C - page 51

    1 2 3 4 5 6 7 8 9 10 11 12 3-7 -12- -13- -15- -12- -13- -15- -13- -13- 3 . DUPLEX COPYING (1-SIDED , 2-SIDED , BOOK-TYPE) This function allows y ou to set the type of originals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided). Original Copy * and require the optional reversing automatic document feeder to be inst ...

  • Vizio 210C - page 52

    1 2 3 4 5 6 7 8 9 10 11 12 3-8 SETTING OF BASIC COPY MODES 2 Place the original(s). P age 2-9 3 Confirm that the 1 1 mode is selected in the ba- sic mode. - If the “ 1-SIDED 1-SIDED ” mode is not selected, press the key (shaded) in the screen on the right, then press the 1 1 key on the next screen. 3. DUPLEX COPYING (1-SIDED, 2-SIDED , BOOK-TYP ...

  • Vizio 210C - page 53

    1 2 3 4 5 6 7 8 9 10 11 12 3-9 4 Press the 1 2 key . Select other copy modes as required. 5 Press the ST ART key . - When placing an original on the glass, perform steps 5 to 6 on page 2-3 continuously . 1-Sided Originals 2-Sided Copies The optional automatic duplexer must be installed. Duplex copying can be performed in the thin paper (64~79g/m 2 ...

  • Vizio 210C - page 54

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 0 SETTING OF BASIC COPY MODES 2 Place the originals. P age 2-9 3 On the basic screen, press the key (shaded) on the right. 1 Place paper in the cassette(s). P age 2-4 3. DUPLEX COPYING (1-SIDED, 2-SIDED , BOOK-TYPE) (Cont.) 4 Press the 2 2 key . 5 Press the ST ART key . 2-Sided Originals 2-Sided Copies 2-Sided Origina ...

  • Vizio 210C - page 55

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 1 4 Press the 2 1 key . Select other cop y modes as required. Book-T ype Originals 2-Sided Copies The optional automatic duplexer must be installed. Duplex copying can be performed in the thin paper (64~79g/m 2 ) and the plain paper (80~105g/m 2 ) modes. *The acceptable paper siz es for this function are A4 or B5 only ...

  • Vizio 210C - page 56

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 2 SETTING OF BASIC COPY MODES 8 T urn to the ne xt page, set the book again and press the ST ART ke y . - Pressing the YES ke y and then the ST AR T k ey also continues copying. - Repeat the procedure above until all your originals have been scanned. 9 After all your originals have been scanned, press the FINISHED key ...

  • Vizio 210C - page 57

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 3 2 Place the original(s). P age 2-9 3 Press the A UT O key . 4. COPY DENSITY ADJUSTMENT Automatic Copy Density Mode 1 Place paper in the cassette(s). P age 2-4 4 Press the ST ART key . In the automatic copy density mode, the background level is detected during copying, so the copying speed becomes slow er . Select ot ...

  • Vizio 210C - page 58

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 4 SETTING OF BASIC COPY MODES HELP 5. COLOUR MODE This function is to switch the colour copy mode and black-and-white copy mode. 1 Press the desired colour mode selection key . - The lamp inside of the selected key lights. - FULL COLOUR : Regardless of colour , all originals are colour-copied (default setting). - BLAC ...

  • Vizio 210C - page 59

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 5 4 According to the type of your original, choose the most suitable image type mode by pressing one of the keys: TEXT/PHOTO : Original with text and printed image mixed together (default setting) TEXT : Original with text only (or text and line artwork) PRINTED IMAGE : Original with printed photos using half tone dot ...

  • Vizio 210C - page 60

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 6 SETTING OF BASIC COPY MODES ...

  • Vizio 210C - page 61

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 4. COLOUR EDITING AND ADJUSTMENT 1. Monocolour copying .................................................................. 4-2 2. Hue adjustment .......................................................................... 4-3 3. Saturation .................................................................................. ...

  • Vizio 210C - page 62

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 COLOUR EDITING AND ADJUSTMENT Select other copy modes as required. 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the MONOCOLOUR key . 1. MONOCOLOUR COPYING Y ou can select one colour out of the 10 colours of the colour sample seal to make a monocolour copy . 1 Place pap ...

  • Vizio 210C - page 63

    1 2 3 4 5 6 7 8 9 10 11 12 4-3 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the HUE/SA TURA TION key . 4 Press the HUE key , then the + or - ke y to adjust the hue. - Pressing the + key brings the colour closer to the next clockwise colour while pressing the - key brings it closer to the next anticl ...

  • Vizio 210C - page 64

    1 2 3 4 5 6 7 8 9 10 11 12 4-4 COLOUR EDITING AND ADJUSTMENT 5 Press the SET key . 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the HUE/SA TURA TION key . 3. SA TURA TION This function allows you to adjust the saturation of copies. 1 Place paper in the cassette(s). P age 2-4 4 Press the SA TURA TION ...

  • Vizio 210C - page 65

    1 2 3 4 5 6 7 8 9 10 11 12 4-5 5 Press the SET key . 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the COLOUR B ALANCE key . 4. COLOUR B ALANCE (YMCK ADJUSTMENT) This function allows you to adjust the colour balance of copies by changing the strength of the primary colours (Y ellow(Y), Magenta(M), Cy ...

  • Vizio 210C - page 66

    1 2 3 4 5 6 7 8 9 10 11 12 4-6 COLOUR EDITING AND ADJUSTMENT 5 Press the SET key . 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the RGB ADJUSTMENT key . 5. RGB ADJUSTMENT This function allows you to adjust the colour balance by changing the strength of Red(R), Green(G) and Blue(B). 1 Place paper in ...

  • Vizio 210C - page 67

    1 2 3 4 5 6 7 8 9 10 11 12 4-7 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the ONE TOUCH ADJUSTMENT ke y . 6. ONE-T OUCH ADJUSTMENT Y ou can make the image quality warm, cool, vivid or clear with just one touch. 1 Place paper in the cassette(s). P age 2-4 4 Press the W ARM ( COOL , VIVID , or CLEAR ...

  • Vizio 210C - page 68

    1 2 3 4 5 6 7 8 9 10 11 12 4-8 COLOUR EDITING AND ADJUSTMENT 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the BA CKGROUND ADJUSTMENT ke y . 7. B A CKGR OUND ADJUSTMENT This function allows you to emphasize the background of light colour originals or to avoid copying the background of dark colour ori ...

  • Vizio 210C - page 69

    1 2 3 4 5 6 7 8 9 10 11 12 4-9 2 Place the original(s). P age 2-9 3 Press the COLOUR key to enter the colour menu. Then press the SHARPNESS key . 8. SHARPNESS ADJUSTMENT This function allows you to emphasize the letters and edges of images. This function is available in the black or monocolour mode as well. 1 Place paper in the cassette(s). P age 2 ...

  • Vizio 210C - page 70

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 0 COLOUR EDITING AND ADJUSTMENT ...

  • Vizio 210C - page 71

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 5. USING THE EDITING FUNCTIONS 1 . Image shift ................................................................................ 5-2 2 . Edge erase ............................................................................... 5-4 3 . Book centre erase .................................................................. ...

  • Vizio 210C - page 72

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-2 1. IMA GE SHIFT 1 Place paper in the cassette(s). P age 2-4 - When using this mode in bypass cop ying ( P age 6-5), be sure to specify the paper size. 2 Place the original(s). Page 2-9 3 Press the EDIT key to enter the editing menu, and press the IMA GE SHIFT key . With this f eature, a mar ...

  • Vizio 210C - page 73

    1 2 3 4 5 6 7 8 9 10 11 12 5-3 1 Press the EDIT key to enter the editing menu, and press the IMA GE SHIFT key . 3 Adjust the width of the margin, then press the SET key . - The default width of the margin is 14 mm. - T o adjust the width, press the 2mm or 30mm ke y to select the desired number , then press the SET ke y . 6 Press the ST ART key . Pr ...

  • Vizio 210C - page 74

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-4 Select other copy modes as required. 5 Press the ST AR T key . 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the EDGE ERASE key . 4 Adjust the width of the white border , then press the SET key . - The default width of the white border is 5 mm. ...

  • Vizio 210C - page 75

    1 2 3 4 5 6 7 8 9 10 11 12 5-5 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the BOOK CENTER ERASE key . - If the key for the desired function is not shown, press the Next key to switch the screen. 4 Adjust the width of the book centre erase margin, then press the SET key . - The default width of the b ...

  • Vizio 210C - page 76

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-6 2 Press the EDIT key to enter the editing menu, and press the DU AL P A GE key . 1 Place paper in the cassette(s). P age 2-4 - When using this mode in bypass cop ying ( P age 6-5), be sure to specify the paper size. Utilizing this feature allo ws the facing pages of a book or magazine to be ...

  • Vizio 210C - page 77

    1 2 3 4 5 6 7 8 9 10 11 12 5-7 7 T urn to the ne xt page, set the book again and press the S T AR T key . - Pressing the YES key and then the ST ART k ey also continues copying. - Repeat the above procedure until all your originals have been scanned. 8 After all your originals have been scanned, press the FINISHED key . - Press the COPY FINAL P A G ...

  • Vizio 210C - page 78

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-8 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the FULL IMA GE key . - The image is automatically reduced by a fe w percent so that the entire image can be copied on a sheet. Select other copy modes as required. 4 Press the ST AR T key . 5. FULL ...

  • Vizio 210C - page 79

    1 2 3 4 5 6 7 8 9 10 11 12 5-9 When a copy is turned with the line —·—·— as a pivot, originals are printed on side 2 (back face) as shown. 6. 2 IN 1 / 4 IN 1 This feature allo ws multiple originals to be reduced and copied onto a single sheet of paper . There are two modes: 2 IN 1 copying, where two originals are copied onto a single sheet, ...

  • Vizio 210C - page 80

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 0 4 Select the type of image combination. - Press the 2IN1 (or 4IN1 , 2IN1 DUPLEX or 4IN1 DUPLEX ) ke y . 5 Select the type of the original. - Press the 1 SIDE (or 2 SIDE ) ke y . Select other copy modes as required. 6 Press the ST AR T key . - When placing an original on the glass, perform ...

  • Vizio 210C - page 81

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 1 The magazine sort mode allows 1-sided originals to be copied and sor ted so that they can be folded and bound along a centre line like typical magazines or booklets . A3, A4-R, B4, LD and L T -R are av ailable. • The optical automatic duplexer must be installed. * This mode cannot be used in combination with the A ...

  • Vizio 210C - page 82

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 2 Select other copy modes as required. 6 Press the ST ART key . - When placing an original on the glass, perform steps 5 to 6 on page 2-3 continuously . - If the optional finisher (MJ-1020) equipped with the saddle stitcher is installed, copies can be automatically stapled along their centr ...

  • Vizio 210C - page 83

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 3 Select other copy modes as required. 6 Press the ST ART ke y . 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the XY ZOOM key . - If the key for the desired function is not shown, press the Next key to switch between the screens. 1 Place paper in the cassette(s). P age 2 ...

  • Vizio 210C - page 84

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 4 3 Press the TRIM (or MASK ) key . 2 Press the EDIT key to enter the editing menu, and press the EDITING key . - If the key for the desired function is not shown, press the Next key to switch the screen. 9. IMA GE EDITING T rimming/Masking Y ou can select an area on an or iginal and copy i ...

  • Vizio 210C - page 85

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 5 Select other cop y modes as required. 9 Press the ST AR T key . 6 Enter the distance values read in step 5 for the specified area. - K ey in the v alue for X1 with the digital k eys and press the upper SET ke y . - Similar ly , set the values for X2, Y1 and Y2. 7 Press the lower SET key . 8 Place the original(s) on ...

  • Vizio 210C - page 86

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 6 9. IMA GE EDITING (Cont.) 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the EDITING key . - If the key for the desired function is not shown, press the Next key to switch the screen. 1 Place paper in the cassette(s). P age 2-4 - When using th ...

  • Vizio 210C - page 87

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 7 Select other copy modes as required. 5 Press the ST ART key . 2 Place the original(s). P age 2-9 3 Press the EDIT key to enter the editing menu, and press the EDITING key . - If the key for the desired function is not shown, press the Next key to switch the screen. Negative/P ositive Rever sal 1 Place paper in the c ...

  • Vizio 210C - page 88

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-1 8 2 Press the EDIT key to enter the editing menu, and press the CENTERING key . - If the key for the desired function is not shown, press the Next key to switch the screen. 3 Press the ALL (or P ART ) key to select the area for centring. - If you hav e pressed the ALL k ey , go to step 8. 1 ...

  • Vizio 210C - page 89

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 9 Select other copy modes as required. 8 Place the original(s) on the glass face down and with its bottom toward you and with its top left aligned against the original scale on the left side. P age 2-9 7 Press the lower SET key . 6 Enter the distance values read in step 5 for the specified area. - Ke y in the value f ...

  • Vizio 210C - page 90

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-2 0 2 Press the EDIT key to enter the editing menu, and press the IMA GE REPEA T key . - If the key for the desired function is not shown, press the Next key to switch the screen. 11. IMA GE REPEA T Y ou can repeat the entire or iginal or a par t of the area of the original on the copy . * Im ...

  • Vizio 210C - page 91

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 1 Select other copy modes as required. 9 Press the ST AR T key . 7 Select the repeat number . - T o change the repeat number : Press the 2 or 8 key to select the desired repeat number , and press the SET key . - If the repeat number is not set, the copier automatically re- peats the original once. Only the height dire ...

  • Vizio 210C - page 92

    1 2 3 4 5 6 7 8 9 10 11 12 USING THE EDITING FUNCTIONS 5-2 2 ...

  • Vizio 210C - page 93

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 6. USING THE SPECIAL FUNCTIONS 1 . Continuous original feeding / Single original feeding ............... 6-2 2. Mixed-sized originals ................................................................ 6-4 3 . Bypass copying ........................................................................ 6-5 - Bypass copying on ...

  • Vizio 210C - page 94

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 USING THE SPECIAL FUNCTIONS 2 Place the original(s). P age 2-9 - Maximum number of originals that can be set Page 2-9 3 Press the PROGRAM key to enter the programme menu, and press the ADF key . 1. CONTINUOUS ORIGINAL FEEDING / SINGLE ORIGINAL FEEDING When using the optional rev ersing automatic document f eeder , you ...

  • Vizio 210C - page 95

    1 2 3 4 5 6 7 8 9 10 11 12 6-3 2 Press the PROGRAM key to enter the programme me nu , and press the ADF key . Single-feed Mode 1 Place paper in the cassette(s). P age 2-4 3 Press the SADF key . Select other copy modes as required. 4 Place an original. Page 2-9 - The original is automatically pulled in and the screen changes as shown on the right. - ...

  • Vizio 210C - page 96

    1 2 3 4 5 6 7 8 9 10 11 12 6-4 USING THE SPECIAL FUNCTIONS Select other copy modes as required. 6 Press the ST ART key . 2 Place the original(s). P age 2-9 - A3 and A4, B4 and B5, FOLIO and A4-R, LD and L T , or LG and L T -R sized originals can be mixed. - The number of originals you can load at a time is 25. 3 Press the PROGRAM key to enter the p ...

  • Vizio 210C - page 97

    1 2 3 4 5 6 7 8 9 10 11 12 6-5 When the desired size of paper is not set in any of the cassettes, or when you want to make copies on A3- wide or non-standard sized paper , use the sheet bypass. The modes below are available even in bypass copying if the paper size is specified: - automatic paper selection - automatic magnification selection - duple ...

  • Vizio 210C - page 98

    1 2 3 4 5 6 7 8 9 10 11 12 6-6 USING THE SPECIAL FUNCTIONS 3. BYP ASS COPYING (Cont.) 1 Set sheets of paper on the bypass guide and align the slides with the size of the paper . - This message appears: Ready for bypass copying - The paper should be placed with the side to be copied f acing up. - If the paper is long-sized, pull out the triple paper ...

  • Vizio 210C - page 99

    1 2 3 4 5 6 7 8 9 10 11 12 6-7 Bypass Copying on Standard Size or A3-wide Paper - When paper is set on the sheet bypass, pressing the by- pass guide icon as shown on the right-hand display can also make the screen in step 3 appear . 1 Perform steps 1 to 2 on page 6-6. Set the “O THER” siz e ke y as necessar y . Page 6-15 If the paper that has b ...

  • Vizio 210C - page 100

    1 2 3 4 5 6 7 8 9 10 11 12 6-8 USING THE SPECIAL FUNCTIONS 3. BYP ASS COPYING (Cont.) 2 Press the NON-ST AND ARD key . 1 P erform steps 1 to 3 on pa ge 6-7. The size of non-standard paper is within the following ranges: Length: 100 ~ 305mm Width: 148 ~ 457mm P age 6-5 (table) Bypass Copying on Non-standard Size Paper 3 Key in each dimension (length ...

  • Vizio 210C - page 101

    1 2 3 4 5 6 7 8 9 10 11 12 6-9 1 Press the desired Memory Number key . - When the paper size is ‘0mm’, the selected Memory Number key is vacant. - When the paper size is displa y ed, a non-standard size is al- ready stored in the selected Memory Number key . If those data may be deleted, perform step 2. New data will be rewrit- ten and stored o ...

  • Vizio 210C - page 102

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 0 USING THE SPECIAL FUNCTIONS 3. BYP ASS COPYING (Cont.) Special P aper such as Thin Paper/Thic k Paper/OHP Films/Stic ker Labels 4 Press the ST ART key . Thin Paper/Thick Paper/Sticker Labels 1 P erform steps 1 to 2 on pa ge 6-7. 2 Check the thickness of the paper and press the THIN , THICK1 , THICK2 or THICK3 key . ...

  • Vizio 210C - page 103

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 1 * Set the OHP films on the sheet b ypass ver tically (the same as f or A4 placement). If you set them horizontally (the same as for A4-R placement), the following message will appear: Set transparency film in A4 direction * If you select the OHP film mode , the cop y speed becomes slow er . OHP Films 4 Press the ST ...

  • Vizio 210C - page 104

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 2 USING THE SPECIAL FUNCTIONS 4. MODE MEMOR Y Storing a Combination of Copy Modes 1 Select the desired copy modes. Example 1: Reproduction ratio ........................................................ 8 5 % Copy quantity .......................................................... 10 copies Colour mode ................ ...

  • Vizio 210C - page 105

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 3 3 Press the PROGRAM key to enter the programme menu, and press the MODE MEMOR Y key . Recalling a Stored Combination of Copy Modes to Make Copies 1 Place paper in the cassette(s). P age 2-4 4 Press the RECALL key . 4 Press the desired Memory Number key . - The copy modes are stored in the selected Memory Number key ...

  • Vizio 210C - page 106

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 4 USING THE SPECIAL FUNCTIONS Confirming Stored Copy Modes T o confir m the cop y modes stored in the Memor y Number ke y , perform steps 3 to 5 on the previous page, then press the Set functions confirmation key . - The screen on the right is an example of modes that ha ve been stored in “MEMOR Y 2”. 4. MODE MEMO ...

  • Vizio 210C - page 107

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 5 When original or paper size is required to be specified and you need to specify it to ‘O THER’ size (e xcept for non-standard siz e), this function should be used. - This function allows the OTHER k ey on the screen on the right to recognize the size that will be used. The initial setting for this ke y is FOLIO ...

  • Vizio 210C - page 108

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 6 USING THE SPECIAL FUNCTIONS 6. USER SELECTION (INITIAL SETTINGS) Y ou can change the initial setting (default setting) of each mode displa yed on the User Selection screen. The following modes can be changed. • Energy saving level • Colour mod e • Copy density (Exposure) mode • Original image type • Bypass ...

  • Vizio 210C - page 109

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 7 - T o change the initial settings of the automatic calibr ation, you need to key in the administrator password (5 digits). - Ask your service technician about setting and changing the administrator password. - We recommend you to take a memo in order not to forget the administrator password. ...

  • Vizio 210C - page 110

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 8 USING THE SPECIAL FUNCTIONS Using the built-in w eekly timer , you can hav e the copier automatically turned ON and OFF at specified times. For instance , you can set the timer f or the star ting time and closing time of your office so that the copier will automatically turn itself ON and OFF at those specified time ...

  • Vizio 210C - page 111

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 9 1 Press the PROGRAM key to enter the programme menu. Press the WEEKL Y TIMER key to remov e the shading pattern. Y ou can cancel the operation of the weekly timer so that the copier can be tur ned ON and OFF normally by the power switch. Cancelling the Use of the W eekly Timer The ON/OFF times of the weekly timer ar ...

  • Vizio 210C - page 112

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 0 USING THE SPECIAL FUNCTIONS 2 Key in the year (last two digits only), month, date, day of the week, time (24-hour format) and minutes with the digital keys, in this order from the left-hand column. - Press the key to move to the next entry column. [Ex.] T o enter 2002 / Nov ember ...., 0 2 1 1 .... * Numbers corresp ...

  • Vizio 210C - page 113

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 1 1 Press the PROGRAM key to enter the programme menu, and press the T O T AL COUNTER key . - If the key for the desired function is not shown, press the Pre ke y or the Ne xt ke y to switch the displa y . This function displays the total number of copies. The total counter is a cumulativ e counter . Y ou cannot clear ...

  • Vizio 210C - page 114

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 2 USING THE SPECIAL FUNCTIONS 10. DEP AR TMENT MANA GEMENT Y ou can administer the copy quantity of each depar tment depending on y our pur poses by setting an access code. Up to 120 codes can be set. * When you want to set the access codes or reset the counters, the administrator password is needed. 1 Press the PROGR ...

  • Vizio 210C - page 115

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 3 1 Press the PRINT OUT A CCESS CODES key in the department management menu. - Procedure to display the screen on the right P age 6-22 - Printing begins. Printing an Access Code List Y ou can pr int out the number of copies output f or each depar tment. l An output example of the access code list A CCESS CODE LIST TIM ...

  • Vizio 210C - page 116

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 4 USING THE SPECIAL FUNCTIONS 2 Press the ENABLE key , then the SET ke y . - The default setting is ‘ disab le ’ . If you administer the depar t- ments with the access code, press the ENABLE k ey . - Selecting ‘ enab le ’ has the copier go into the depar tment man- agement mode. The access code input screen ( ...

  • Vizio 210C - page 117

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 5 4 Using the digital keys, enter the current access code (5 digits) of the department you want to change, and press the SET key . 4 Using the digital keys, enter the desired access code (5 digits) into the fields of NEW A CCESS CODE and CONFIRM A CCESS CODE, and press the SET key . - Y ou cannot enter an access code ...

  • Vizio 210C - page 118

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 6 USING THE SPECIAL FUNCTIONS 7 Key in a new upper limit number of copies (7 digits) you want to set with the digital keys, and then press the SET key . - Press the DISABLE ke y if the limitation is not necessar y , then press the SET ke y . Deleting an Access Code 4 T o delete all the registered access codes, press t ...

  • Vizio 210C - page 119

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 7 Resetting Counters This function resets all counters or a specific counter to “ 00000 ” . Howev er , the total counter ( Page 6-21) cannot be reset. * This setting is availab le only when the administrator pass word has been entered in step 2 on page 6- 22. 1 Press the CLEAR COUNTER key in the department managem ...

  • Vizio 210C - page 120

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 8 USING THE SPECIAL FUNCTIONS 11. A UT OMA TIC CALIBRA TION 2 Press the PROGRAM key to enter the programme menu, and press the CALIBRA TION key . - If the key for the desired function is not shown, press the Pre key or the Next key to switch the screen. 3 Enter the administrator password (5 digits), then press the SET ...

  • Vizio 210C - page 121

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 9 If the chart is not properly placed, the following message appears: Set chart correctly Go back to step 6 and place the chart again. 7 Press the ST ART ke y . - When the message “ READ Y ” appears, the entire oper ation is completed. 6 When the display on the right appears, place the chart face down on the glass ...

  • Vizio 210C - page 122

    1 2 3 4 5 6 7 8 9 10 11 12 6-3 0 USING THE SPECIAL FUNCTIONS 1 Press the PROGRAM key to enter the programme menu, and press the CHANGE LANGU A GES key . - If the key for the desired function is not shown, press the Next k ey to s witch the screen. 12. SWITCHING BETWEEN LANGU A GES The language used on the touch panel can be changed to a different o ...

  • Vizio 210C - page 123

    1 2 3 4 5 6 7 8 9 10 11 12 6-3 1 Press the ENERGY SA VER or ST ART ke y on the control panel. The copier star ts to warm itself up. 13. SETTING THE ENERGY SA VING MODE This function allows the copier automatically to go into the energy saving mode (unnecessary electricity is cut off at standby) if it is left inactive for a specified period of time. ...

  • Vizio 210C - page 124

    1 2 3 4 5 6 7 8 9 10 11 12 6-3 2 USING THE SPECIAL FUNCTIONS Clearing the Off-Mode/Sleep Mode T ur n ON the pow er switch once again when the copier is in the off-mode. Press the ST ART k ey during the sleep mode . The copier starts to war m itself up . 1 Press the PROGRAM key to enter the programme menu, and press the A UT O SHUT OFF key . - If th ...

  • Vizio 210C - page 125

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 7. SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 1. Finishing modes and finishers (optional) ................................... 7-2 2. Sor t/group copying .................................................................... 7-3 3. Staple sor ting ............................................................ ...

  • Vizio 210C - page 126

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 1. FINISHING MODES AND FINISHERS (OPTIONAL) There are 2 types of optional finishers (MJ-1019 and MJ-1020). Functions available differ depending on whether the finisher is in- stalled, or which type of the finisher is installed. - Press the key on the basic scree ...

  • Vizio 210C - page 127

    1 2 3 4 5 6 7 8 9 10 11 12 7-3 2. SOR T/GROUP COPYING T o make multiple copies , you can select the sor t mode or group mode as necessary . The paper sizes a vailab le for sort/group copying are A3, A4, A4-R, B4, B5, FOLIO , LD , LG, L T , L T -R and COMP . Example of making 5 sets of copies from 5-page originals - Sort copying - Group copying 5 4 ...

  • Vizio 210C - page 128

    1 2 3 4 5 6 7 8 9 10 11 12 7-4 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 2 Place the original(s). P age 2-9 AB AB AB AB AB AB AB AB AB AB 3. ST APLE SORTING 1 Place paper in the cassette(s). Page 2-4 - When using this mode in bypass cop ying ( Page 6-5), be sure to specify the paper size. When the optional finisher is installed, you ...

  • Vizio 210C - page 129

    1 2 3 4 5 6 7 8 9 10 11 12 7-5 P aper size P aper weight 80 g/m² 90 g/m² 105 g/m² A4, B5, L T 50 sheets 30 sheets 30 sheets A3, A4-R, B4, FOLIO 30 sheets 15 sheets 15 sheets LD , LG, L T -R, COMP 4 Press the FRONT ST APLE (or DOUBLE ST APLE or REAR ST APLE ) key . Select other copy modes as required. 5 Press the ST ART key . - If you set the sta ...

  • Vizio 210C - page 130

    1 2 3 4 5 6 7 8 9 10 11 12 7-6 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 2 Set the paper size. F or cassette feeding P age 3-3 (step 3) F or bypass f eeding P age 6-7 (step 4) 3 Place the original(s). P age 2-9 - When placing them in the reversing automatic document feeder (optional), set them by referring to the order of pages in th ...

  • Vizio 210C - page 131

    1 2 3 4 5 6 7 8 9 10 11 12 7-7 If you want to saddle stitch A3, B4 or LD size paper (when the MAGAZINE SORT & SADDLE STITCH or SADDLE STITCH is selected), raise the stopper of the saddle stitch tra y . 4 Press the key on the basic screen as shown on the right (shaded). Conditions Making Saddle Stitching P ossible Paper size A3 A4-R B4 LD LT - R ...

  • Vizio 210C - page 132

    1 2 3 4 5 6 7 8 9 10 11 12 7-8 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 2 Place the original(s). P age 2-9 3 Press the key on the basic screen as shown on the right (shaded). Number of punch holes and available paper sizes: Since the number of punch holes and the distance between the holes vary depending on the countr y , purchase a ...

  • Vizio 210C - page 133

    1 2 3 4 5 6 7 8 9 10 11 12 8-1 8. NETW ORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) 1. Scanning the image data ........................................................... 8-2 - Scan setting on the touch panel ................................................................... 8 - 2 - T ouch panel dur ing scanning .................. ...

  • Vizio 210C - page 134

    1 2 3 4 5 6 7 8 9 10 11 12 8-2 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) 1. SCANNING THE IMA GE D A T A Scan Setting on the T ouch P anel Scan setting - When the automatic function clear ( P age 1-4) works in the middle of setting, star t setting again from step 2. - Scanning cannot function during data outputting. If the sc ...

  • Vizio 210C - page 135

    1 2 3 4 5 6 7 8 9 10 11 12 8-3 5 Set the scanning conditions. - Press the PREV and the NEXT keys to switch the screen and make necessary settings. After having completed all the settings, press the OK ke y . - The screen on the right is for selecting a single side or double sides of the originals to be scanned. - The original type and resolution (d ...

  • Vizio 210C - page 136

    1 2 3 4 5 6 7 8 9 10 11 12 8-4 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) 1. SCANNING THE IMA GE D A T A (Cont.) Scan Setting on the T ouch P anel (Cont.) 6 Press the area as shown on the screen on the right to switch to the file name input screen. 7 Enter a file name within 8 letters using the alpha- bet (touch panel) and nu ...

  • Vizio 210C - page 137

    1 2 3 4 5 6 7 8 9 10 11 12 8-5 10 Press the MAILBO X key . Selecting MAILBO X Stores the scanned data as a file in an arbitrary folder (mailbox) in the hard disc of the optional printer controller . * See the Printing Guide (User Document CD-ROM) for how to retrieve the data. 11 Press the area as shown on the screen on the right, then enter the mai ...

  • Vizio 210C - page 138

    1 2 3 4 5 6 7 8 9 10 11 12 8-6 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) 1. SCANNING THE IMA GE D A T A (Cont.) Scan Setting on the T ouch P anel (Cont.) Selecting E-MAIL Select this when transmitting the scanned data (or URL) by e-mail. 10 Press the E-MAIL key . 11 Press the area as shown on the right to switch to the e-mai ...

  • Vizio 210C - page 139

    1 2 3 4 5 6 7 8 9 10 11 12 8-7 15 Select an attachment f ormat ( A T T A CHMENT or URL ), then press the SET key . - A TT ACHMENT ... Attaches the scanned image data to the e-mail and sends them to the set mail address from the printer controller . Howev e r , if the mail sev er capacity fo r ‘ A TT A CHMENT ’ (the initial setting is 1MB when s ...

  • Vizio 210C - page 140

    1 2 3 4 5 6 7 8 9 10 11 12 8-8 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) 1. SCANNING THE IMA GE D A T A (Cont.) Scan Setting on the T ouch P anel (Cont.) 10 Press the HOLDQUEUE key . - If you want to store in the ‘ Mailbo x ’ or ‘ E-mail ’ as well, make the settings for each destination before pressing the Scan! key ...

  • Vizio 210C - page 141

    1 2 3 4 5 6 7 8 9 10 11 12 8-9 T ouch P anel during Scanning When Using the Optional Reversing Automatic Document Feeder When Placing an Original on the Glass 1 The screen is switched as shown on the right dur- ing scanning, and the number of pages that have already been scanned is displayed. - The screen automatically returns to the copy (basic) s ...

  • Vizio 210C - page 142

    1 2 3 4 5 6 7 8 9 10 11 12 8-1 0 NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER) HELP 2. SHUTTING DO WN THE PO WER SUPPL Y T O THE PRINTER CONTROLLER If the optional internal printer controller (GA-1120) is installed, be sure to shut down the power supply to the printer controller before turning the power s witch of the copier OFF ...

  • Vizio 210C - page 143

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 1 . Description of the flashing graphic symbols ............................. 9-2 2 . Add paper symbol .................................................................... 9-3 - Adding paper to the cassettes .................................................................... 9 - 3 - Adding paper to the large-capacity ...

  • Vizio 210C - page 144

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 1. DESCRIPTION OF THE FLASHING GRAPHIC SYMBOLS The graphic display on the touch panel shows the status of the copier . When one of the g raphic sym- bols flashes, take the appropriate action referring to the page shown. CHECK ORIGINALS symbol Flashes when an original ...

  • Vizio 210C - page 145

    1 2 3 4 5 6 7 8 9 10 11 12 9-3 2. ADD P APER SYMBOL Adding Paper to the Cassettes When the paper supply in the selected cassette or the large-capacity feeder (optional) runs out, the cassette or large-capacity feeder sho wn on the display flashes, and the f ollowing message appears: Add paper Add paper as follo ws. 1 While pulling up the cassette g ...

  • Vizio 210C - page 146

    1 2 3 4 5 6 7 8 9 10 11 12 9-4 WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 2. ADD P APER SYMBOL (Cont.) Adding Paper to the Large-Capacity Feeder (optional) 1 Open the cover of the large-capacity feeder (optional). 2 Place paper in the large-capacity feeder . - Maximum number of sheets that can be set Page 2-4 - F an the sheets well and make ...

  • Vizio 210C - page 147

    1 2 3 4 5 6 7 8 9 10 11 12 9-5 When the toner car tridge r uns out of toner , the REPLA CE T ONER CARTRIDGE symbol and a letter showing the cor- responding toner colour flash, and the following message appears: Install new ****** toner cartridge Press HELP 1 Open the front covers in the order of to . Here at T oshiba dependab le high quality image ...

  • Vizio 210C - page 148

    1 2 3 4 5 6 7 8 9 10 11 12 9-6 WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 6 Close the covers in the order of to . - The following message appears: W ait adding toner The copier automatically star ts supplying toner . - When the toner has finished being supplied, the touch panel returns to the Basic menu. (It takes approx. 4 or 5 minutes unt ...

  • Vizio 210C - page 149

    1 2 3 4 5 6 7 8 9 10 11 12 9-7 4. REPLA CE T ONER B A G SYMBOL When the toner bag becomes full of used toner , the REPLACE TONER BAG symbol flashes, and this message appears: Dispose of used toner Press HELP 1 Open the front covers in the order of to . 2 Remove the used toner bag from the copier in the direction of the arro w . 3 Close the used ton ...

  • Vizio 210C - page 150

    1 2 3 4 5 6 7 8 9 10 11 12 9-8 WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 4 Set the new toner bag in the copier . 5 Close the covers in the order of to . 4. REPLA CE T ONER B A G SYMBOL (Cont.) ...

  • Vizio 210C - page 151

    1 2 3 4 5 6 7 8 9 10 11 12 9-9 5. CLEAR P APER SYMBOL When a paper misf eed occurs in the copier , the CLEAR P APER symbol flashes in the positions where the paper is misfed. If or symbol of - flashes, the following message will appear: Paper Misfeed in the Reversing Automatic Document Feeder (optional) 2 Raise the automatic document feeder and rem ...

  • Vizio 210C - page 152

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 0 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) Paper Misfeed in the Cassette Feeding Area 1 Open the cover . - Holding the handle, open the cov er slowly . 4 Raise the automatic document feeder and remove any misfed paper . 3 Open the exit-side cover and remove any misfed origi- n ...

  • Vizio 210C - page 153

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 1 Paper Misfeed in the Large-Capacity Feeder (optional) 1 Open the large-capacity feeder . - Holding its handle as shown, lift it to unlock it and open the feeder slo wly aw a y from the copier . 2 Remo ve any misf ed paper . 3 Close the large-capacity feeder slo wly and full y . 5 Remove an y misfed paper . 4 Open th ...

  • Vizio 210C - page 154

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 2 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) Paper Misfeed on the Bypass Guide 1 Pull out any misfed paper on the bypass guide. - Reset the sheets of paper on the bypass guide. 1 Remove the cop y receiving tray . 2 Open the front covers in the order of to . - If a finisher (opti ...

  • Vizio 210C - page 155

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 3 5 Open the bypass guide. - Open the b ypass guide cover , press the blue button and open the bypass guide. - Remov e any misfed paper . 6 T urn the knob near the entrance of the transf er belt unit in the direction of the arrow (anticlockwise) to send any paper to the transfer belt. 3 Open the exit co ver . 4 Remo v ...

  • Vizio 210C - page 156

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 4 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) 7 T urn the knob in the direction of the arrow (c lock- wise) and pull out the transfer belt unit. If the CLEAR P APER symbol flashes as sho wn on the right, be sure to carry out step 6. If this action is not sufficient, the paper may ...

  • Vizio 210C - page 157

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 5 Paper Misfeed in the Automatic Duplexer (optional) 1 Remove the copy receiving tra y . 2 Open the exit co ver . - If a finisher (optional) is attached, first pull it away slowly from the copier by pushing the release le ver . 3 Put down the lower guide of the exit side and re- move an y misfed paper . Lower guide of ...

  • Vizio 210C - page 158

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 6 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) 4 Pull out the automatic duplexer slowly until it comes to a stop. 6 Push the lever to lift the lower guide plate. - Make sure that the guide plate is latched to prevent it from dropping. 5 Holding the handle of the upper guide plate, ...

  • Vizio 210C - page 159

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 7 Paper Misfeed in the Hole Punch Unit (optional) 1 Push the release lever and pull out the finisher slowly awa y from the copier . 2 Open the cover of the hole punch unit. 3 Rotate the blue knob to locate the arrow within the area on the label. - Under this condition, the punchers are up, allowing the paper shown in ...

  • Vizio 210C - page 160

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 8 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5. CLEAR P APER SYMBOL (Cont.) Paper Misfeed in the Finisher (optional) 1 Open the upper finisher cover . 2 Lift knob or knobs and , then remove any misfed paper . 3 Remove any misfed paper in the paper exit area. ...

  • Vizio 210C - page 161

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 9 3 Open the lower co ver of the finisher . 4 T urn the right-hand knob anticlockwise. Then push the left-hand knob and turn it clockwise. 2 Open the entrance cover of the saddle stitcher and remove an y misfed paper . Paper Misfeed in the Saddle Stitch Unit (optional) 1 Push the release lever and move the finisher aw ...

  • Vizio 210C - page 162

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 0 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 5 Remove any paper misfed on the exit side of the saddle stitcher . 6 Open the exit cover of the saddle stitcher and remove any misf ed paper . 5. CLEAR P APER SYMBOL (Cont.) ...

  • Vizio 210C - page 163

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 1 6. ADDING ST APLES (OPTIONAL) When the staple cartridge runs out of staples, the following message appears: Set staple cartridge Add staples to the cartr idge according to the procedure below . Finisher 1 Open the front co ver of the finisher . 2 Close the front co ver of the finisher , and about 10 seconds later , ...

  • Vizio 210C - page 164

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 2 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 6. ADDING ST APLES (OPTIONAL) (Cont.) 7 Push in a new staple case into the staple cartridge completely inside until a click is heard. - Do not remove the seal holding the staples before the staple case is set in the car tridge. 8 Pull out the seal which holds the s ...

  • Vizio 210C - page 165

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 3 If test stapling fails to be performed and the following mes- sage remains displayed, repeat the above procedure from steps 1 to 12. Set staple car tridge 11 Confirm that the finisher is attached to the copier , and that the paper size is set to any size other than A5-R or B5-R. - T est stapling cannot be performed ...

  • Vizio 210C - page 166

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 4 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 3 Pull out the grip of the saddle stitch holder ( ) to- ward you and turn it ( ) 90 o clockwise in the direc- tion of the arro w . 4 Remove the empty staple case and set a new one. - Replace both staple cases with new ones. - Do not remove the seal holding the stap ...

  • Vizio 210C - page 167

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 5 When copies have not been stapled in the staple mode, and if the following message is shown on the displa y: Examine stapler staples hav e been jammed. Remove them as described below . Finisher 1 P erform steps 1 to 5 of the pr ocedure f or “6. ADD- ING ST APLES Finisher ” ( P age 9-21) . 2 While pushing the blu ...

  • Vizio 210C - page 168

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 6 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL Saddle Stitch Unit (MJ-1020 only) 1 P erform steps 1 to 3 of the pr ocedure f or “ 6. ADD- ING ST APLES Saddle Stitch Unit ” ( P age 9-23) . 2 Remove the empty staple case. 3 While pushing down on the lever , pull up the knob . 4 Remove any jammed staples, and ...

  • Vizio 210C - page 169

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 7 8. C LEARING A CCUMULA TED PUNCHED P APER BITS (OPTIONAL) When paper bits punched from copies ha ve accumulated to a certain lev el, the follo wing message appears. Please Dispose of Hole Punch Dust Dispose of the paper bits as described below . 1 Open the cover of the hole punch unit. 2 Holding the blac k handle, s ...

  • Vizio 210C - page 170

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 8 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL When the CALL SER VICE symbol flashes, the f ollowing message appears and copying is no longer possible. Call your service technician. Call for service When the CALL SER VICE or CLEAR P APER symbol is flashing, if you press the c Clear ke y and the digital ke y 8 t ...

  • Vizio 210C - page 171

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 9 When the follo wing message has appeared on the display panel: Time for periodic maintenance (Colour) or Time for periodic maintenance (Black) this indicates that assistance from a qualified service technician is required. Call your service techni- cian for assistance. 10. PERIODIC MAINTENANCE MESSA GE , ...

  • Vizio 210C - page 172

    1 2 3 4 5 6 7 8 9 10 11 12 9-3 0 WHEN THE GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL ...

  • Vizio 210C - page 173

    1 2 3 4 5 6 7 8 9 10 11 12 10 -1 10. MAINTENANCE 1. Daily inspection ........................................................................ 10-2 2. Simple troubleshooting ............................................................. 10-4 ...

  • Vizio 210C - page 174

    1 2 3 4 5 6 7 8 9 10 11 12 10 -2 MAINTENANCE 1. D AIL Y INSPECTION Items for Dail y Chec k Power switch ON/OFF status We recommend turning the power s witch ON at the star tup e veryda y so that copies can be made when- ev er you want. Also, be sure to turn the power s witch OFF when you lea ve the office . In the follo wing cases, do not turn the ...

  • Vizio 210C - page 175

    1 2 3 4 5 6 7 8 9 10 11 12 10 -3 Cleaning the Reversing Automatic Document Feeder (optional) If the scanning area is dirty , it may cause an original jam or result in dir ty copies. Also , if the original transpor t belt is dir ty , the copies ma y become soild or the original size ma y be incorrectly detected. - Clean the scanning area and the ori ...

  • Vizio 210C - page 176

    1 2 3 4 5 6 7 8 9 10 11 12 10 -4 MAINTENANCE Is the copier in the energy saving mode (Automatic Energy Saving mode)? Is the access code keyed in? Is the access code correct? Is a key copy counter (optional) used? Is the “Warming up” message displayed? Does the administrator password input screen appear? Is interrupt copying set? Reference page ...

  • Vizio 210C - page 177

    1 2 3 4 5 6 7 8 9 10 11 12 10 -5 Items to be checked Has the message “Install new *** toner cartridge” appeared on the screen? Is the copy density or the back- ground adjustment set lighter than is standard? Is the original cover or the op- tional reversing automatic docu- ment feeder firmly closed? Is the original glass dirty? Is the original ...

  • Vizio 210C - page 178

    1 2 3 4 5 6 7 8 9 10 11 12 10 -6 MAINTENANCE Has the message “Install new *** toner cartridge” appeared on the screen? Has the “CALL SER VICE” mes- sage appeared on the screen? Is the paper moist? Is the level of the image density and the colour adjustment cor- rect? Are there functions that cannot be combined set together? Reference page R ...

  • Vizio 210C - page 179

    1 2 3 4 5 6 7 8 9 10 11 12 11 -1 11. SPECIFICA TIONS & OPTIONS 1. e-STUDIO210c/310c specifications ......................................... 11-2 2. Specifications of options .......................................................... 11-5 3. P acking list ............................................................................ 11-10 4. Cop ...

  • Vizio 210C - page 180

    1 2 3 4 5 6 7 8 9 10 11 12 11 -2 SPECIFICA TIONS & OPTIONS Model Name FC-210/310 T y pe Console type Ori gin al G las s Fixed Copying System Laser electronic copying Developing System Dry developing (2-component) Fixing Method Belt fusing Photosensor T ype OPC (organic photoconductive) drum Original Scanning System Linear CCD sensor Resolution ...

  • Vizio 210C - page 181

    1 2 3 4 5 6 7 8 9 10 11 12 11 -3 Image Quality Density Control Manual adjustment (11 density steps) and automatic adjustment Image Control Hue, Saturation, Colour balance (YMCK adjustment), RGB adjustment, Sharpness, Background adjustment and One-touch adjustment Additional Functions Automatic paper selection, Automatic magnification selection, Int ...

  • Vizio 210C - page 182

    1 2 3 4 5 6 7 8 9 10 11 12 11 -4 SPECIFICA TIONS & OPTIONS Mode P aper Size Feeder e-STUDIO210c e-STUDIO310c Full colour Black Full colour Black A4, B5, A5-R, Cassette 2 1 sheets/min. 31 sheets/min. 31 sheets/min. L T , ST -R, 8.5”SQ Large-capacity feeder(A4) Bypass 21 sheets/min. 24 sheets/min. 24 sheets/min. A4-R, B5-R, Cassette 17 sheets/m ...

  • Vizio 210C - page 183

    1 2 3 4 5 6 7 8 9 10 11 12 11 -5 2. SPECIFICA TIONS OF OPTIONS Reversing Automatic Document Feeder Model Name MR-3006E Copy Sides Single-side, Duplex Number of Originals (A4) 50 originals (64~90g/m 2 ), 40 originals (91~105g/m 2 ) Feeding Speed (A4, single-side) 25 originals/min. Acceptable Originals A3~A5-R, LD~ST -R (A5 and ST are not acceptable) ...

  • Vizio 210C - page 184

    1 2 3 4 5 6 7 8 9 10 11 12 11 -6 SPECIFICA TIONS & OPTIONS Additional Cassette Module Model Name MY -1020 Acceptable P aper A3~A5-R, LD~ST -R (A5 and ST are not acceptable) P aper W eight: 64~163 g/m 2 Maximum Capacity 600 sheets (90g/m 2 ) Dimensions 636mm(W) x 626mm(D) x 110mm(H) Weight Approx. 5kg 2. SPECIFICA TIONS OF OPTIONS (Cont.) Large- ...

  • Vizio 210C - page 185

    1 2 3 4 5 6 7 8 9 10 11 12 11 -7 Finishers Model Name MJ-1019 MJ-1020 T ype Floor type Floor type Acceptable P aper A3-wide~A5-R, LD~ST -R (A5 and ST are not acceptable) P aper weight: 64~256g/m 2 Number of Copies 80g/m 2 90g/m 2 105g/m 2 Stapled at a Time A4, B5, L T 50 sheets 30 sheets 30 sheets (For both models) A3,A4-R,B4,FOLIO 30 sheets 15 she ...

  • Vizio 210C - page 186

    1 2 3 4 5 6 7 8 9 10 11 12 11 -8 SPECIFICA TIONS & OPTIONS 1,2 x x Whichever of 74mm, 500 sheets or 50 cop- ies is reached first. Whichever of 74mm, 500 sheets or 50 cop- ies is reached first. Staples loaded Mixed paper loaded Finishers (Cont.) T ra y Loading Capacity ...*The tra y loading capacity is deter mined b y the loading height as below ...

  • Vizio 210C - page 187

    1 2 3 4 5 6 7 8 9 10 11 12 11 -9 * Specifications and appearance are subject to change without notice in the interest of product improvement. Network Scanning Function ( the optional GA-1020/GA-1030 is required to be installed) * See the Operator’ s Manual f or the Printer Controller (User Document CD-ROM) f or the specifications of the printer c ...

  • Vizio 210C - page 188

    1 2 3 4 5 6 7 8 9 10 11 12 11 -1 0 SPECIFICA TIONS & OPTIONS Photoconductive Drum Copy Receiving T r a y Pac king List DF Level-up Kit Unpacking Instructions Operator’ s Manual P ock et Set-up Instructions Customer Satisfaction Card Detachable Cords 3. P A CKING LIST ...

  • Vizio 210C - page 189

    1 2 3 4 5 6 7 8 9 10 11 12 11 -1 1 4. COPYING FUNCTION COMBINA TION MA TRIX Function set last Original mode selection 2 1 Y : The functions can be combined. F : The functions cannot be combined. (The function set first takes precedence.) S : The functions cannot be combined. (The function set last takes precedence.) *1: Available if paper size is s ...

  • Vizio 210C - page 190

    1 2 3 4 5 6 7 8 9 10 11 12 11 -1 2 SPECIFICA TIONS & OPTIONS 5. IMA GE QU ALITY ADJUSTMENT COMBINA TION MA TRIX Manual S Y Y Y Y Y Y Y Y Y S Y Auto S Y Y Y Y Y Y Y Y Y F Y Monocolour Y Y F F F F F F F F Y Y Hue Y Y F Y Y Y F F F F Y Y Saturation Y Y F Y Y Y F F F F Y Y Colour balance Y Y F Y Y F F F F F Y Y RGB Y Y F Y Y F F F F F Y Y Vivid Y Y ...

  • Vizio 210C - page 191

    1 2 3 4 5 6 7 8 9 10 11 12 11 -1 3 6. INDEX Numbers 1-Sided Originals to 1-Sided Copies 3-8 1-Sided Originals to 2-Sided Copies 3-9 2 IN 1/4 IN 1 Copying 5-9 2-Sided Originals to 1-Sided Copies 3-10 2-Sided Originals to 2-Sided Copies 3-10 2IN1 Duplex Copying 5-10 305x457mm key 6-7 4IN1 Duplex Copying 5-10 A A3-wide paper 6-5 , 6-7 , 6-10 Acceptabl ...

  • Vizio 210C - page 192

    1 2 3 4 5 6 7 8 9 10 11 12 11 -1 4 SPECIFICA TIONS & OPTIONS 6. INDEX (Cont.) Copy density adjustment 3-13 COPY FINAL P AGE k ey 3-12 COPY JOB REQUEST key 2-16 Copy paper maximum capacity 2-4 types and sizes 2-4 Copy receiving tray 9-12 , 9-15 Copying function combination matrix 11-11 Copying procedure 2-2 Copying speed 11-4 D Daily Inspection ...

  • Vizio 210C - page 193

    1 2 3 4 5 6 7 8 9 10 11 12 11 -1 5 MEMOR Y CLEAR ke y 2-18 MEMOR Y key 6-9 , 6-12 Memory Number key 6-13 Message display 1-6 Mirror Image mode 5-16 Mixed-sized originals 6-4 Mode Memory 6-12 N Negative/P ositive Re versal 5-17 O Off-mode 1-11 OHP FILM 6-5 OHP film 2-4 , 2-5 , 2-6 , 3-3 , 3-4 , 6-11 One-touch Adjustment 4-7 One-touch Zoom K eys 3-6 ...

  • Vizio 210C - page 194

    1 2 3 4 5 6 7 8 9 10 11 12 11 -1 6 SPECIFICA TIONS & OPTIONS 6. INDEX (Cont.) Setting Access Codes 6-24 Automatic Energy Saving mode 6-31 Automatic Shutoff mode 6-32 cassette for special uses 2-6 copy paper 2-4 Date and Time 6-20 Da ylight Saving Time 6-20 ON/OFF times 6-18 originals 2-9 other size 6-15 Sharpness Adjustment 4-9 SHUTDOWN key 8-1 ...

  • Vizio 210C - page 195

    1-1, KAND A NISHIKI-CHO , CHIY OD A-KU , T OKY O , 101-8442, JAP AN Recycled paper is used f or the inside pages of this book. This Operator's Manual is printed with ink containing so ya bean oil. © Cop yright TOSHIBA TEC CORPORA TION 2002 ALL RIGHTS RESER VED 442171650A1 R0110203800-TTEC V er02 2002-10 AB OPERA T OR'S MANU AL FOR COPYIN ...

Manufacturer Vizio Category Copier

Documents that we receive from a manufacturer of a Vizio 210C can be divided into several groups. They are, among others:
- Vizio technical drawings
- 210C manuals
- Vizio product data sheets
- information booklets
- or energy labels Vizio 210C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vizio 210C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vizio 210C, service manual, brief instructions and user manuals Vizio 210C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vizio 210C.

Similar manuals

A complete manual for the device Vizio 210C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vizio 210C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vizio 210C.

A complete Vizio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vizio 210C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vizio 210C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vizio 210C, that we can find in the current document
3. Tips how to use the basic functions of the device Vizio 210C - which should help us in our first steps of using Vizio 210C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vizio 210C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vizio 210C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vizio 210C?

Use the form below

If you did not solve your problem by using a manual Vizio 210C, ask a question using the form below. If a user had a similar problem with Vizio 210C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)